Another user-modified table '' (NNM1) (ODBC -2039)  [Message 131-183]

Hi All,
I am trying to create a new numbering series in SAB B1 2007 B PL 14 and facing with this error:
Another user-modified table '' (NNM1) (ODBC -2039)  [Message 131-183]
I would really appreciate your advise since new numbering series is not getting created.

Hi,
To avoid these type of error message
  1.Ensure all users are logged out.
  2. Restart the Server
  3. Create Numbering series.
*Close the thread if issue solved.
Regards
Jambulingam.P

Similar Messages

  • Another user-modified table  '' (POR1) (ODBC -2039)  [Message 131-183]

    I have updated the purcahse order form.I have added a combo excisable.Also I have defined excisable and non-excisable warehouses.I have added a condition as,
    If I select Yes from the combo then the warehouse of the item should be excisable.And,if I select No then the item should be from non-excisable warehouse.
    When I change the warehouse as per the above condition it gives error as,
    Another user-modified table  '' (POR1) (ODBC -2039)  [Message 131-183]
    I am using SAP Business One 2007 B.
    PL:11
    The errors occurs when I click on update button.The error does not occur if I don't update purchase order.
                                                                                    Regards,
                                                                                    Dilip Kumbhar

    Dilip Kumbhar,
    You may check these threads first:
    Updating a PO
    In Purchase Order
    Thanks,
    Gordon

  • Another user modified table (NNM1) (ODBC-2039)

    Hi All
    While Creating a document series the system displayes an error message saying "Another User Modified table (NNM1) (ODBC-2039)"
    What could be the error?
    Thanks
    SV Reddy

    Hi SV Reddy,
    Check the thread
    Error while updating the Document  Numbering Form
    Problem in numbering series
    *Close the thread if issue solved.
    Regards
    Jambulingam.P
    Edited by: Jambulingam P on Aug 10, 2009 10:01 AM

  • Another user-modified table  'Items' (ODBC -2039)

    I have a problem with the Items object. I have a folder on the Item MasterData  form and a extra table that stores the info from that tab.
    When I try to update an item i get this error message :
    Another user-modified table  'Items' (OITM or OITW) (ODBC -2039)
    I can update items normally if my addon is stopped. I have read something about a similar message about PO, but I get the error on all items( even newly added ones) so I don't think it's about them being involved in PO.
    Any ideas on this matter ?

    Hi,
    I faced a similar error once, i also modified the Item Master screen and added a tab with an extra table, then i was modifing the FORM MODE explicitly.
    If ur are modifing the FORM MODE explicitly we may get this error.
    Vasu Natari.

  • Another user-modified table 'Users'(OUSR)(ODBC -2039) [Message 131-183]

    Hi All
    This error "Another user-modified table 'Users'(OUSR)(ODBC -2039 [Message 131-183]" happens when trying to change the manager password, I'm able to change the manager password for all the other databases on the server except for one.
    I have logged in using another Superuser account to try and reset the password of the manager account but SBO is having none of it and I get this error.
    Does anyone have any ideas?
    Many thanks
    Hayden
    Edited by: Hayden Nothnagel on Oct 6, 2009 4:37 PM

    Hi Hayden,
    You may check SAP Note 941116 and 1131133 and also these threads:
    Another user modified table (NNM1) (ODBC-2039)
    another user modified table
    Another user-modified table
    Thanks,
    Gordon

  • Another user-modified table 'Items' (ITEM) (ODBC - 2039) [Message 131-183]

    Hi All,
    Just had an issue reported by a customer. They tried to amend a UDF on an Item Master record and they can change data such as the Item description, remarks etc and update the item successfully... However, when they tried to amend the contents of the UDF's attached to the Item  the system issue the message:
    Another user-modified table 'Items' (ITEM) (ODBC - 2039) [Message 131-183]
    Any thoughts?
    Best regards
    Earl

    I figured it out
    We had a UDF name U_Discount that was set to only allow Y or N.
    In the database I had a space after the Y or N value for some of the records. I discovered it by running
    SELECT distinct [U_Discount], COUNT(*)  FROM [OITM]  group by  [U_Discount]
    No idea how the space got there, but I ran
      update OITM set U_Discount = 'N' where LEFT(U_Discount,1) = 'N'
      update OITM set U_Discount = 'Y' where LEFT(U_Discount,1) = 'Y'
    and it fixed it

  • Another user-modified table ODBC -2039 [Message 131-183]

    Hi!
    I created a matrix that it is linked to a ChooseFromList, that has multiselection = true.
    The thing is that if i'm trying to update the record selecting multiple values, this error is displayed "Another user-modified table ODBC -2039 [Message 131-183]".
    If i try doing it with just one record, the UDO works perfectly.
    Also, it works fine if i'm creating for the first time the record and adding the multiple selection lines.
    Greetings!
    Reynaldo!

    HI,
    I think you have some transactions in the background.
    Close all stuffs, delete SM_OBS_DLL directory from your TEMP directory, and start the work again.
    Regards,
    J.

  • Another user-modified table 'Queries' (OUQR) (ODBC -2039) [Message 131-183]

    Hi, Experts.
    I updated B1 2007B PL18 from PL13.
    I have following error message when modified query in query manager.
    "Another user-modified table 'Queries' (OUQR) (ODBC -2039) [Message 131-183]"
    However, I can modify same query in PL13.
    Please, share the information.

    Hi,
    If you can make sure nobody else modifying the query, it is probably a bug.  Log a message to support immediately.
    Thanks,
    Gordon

  • Another user modified table (NNM1)

    Dear experts,
    I get an error Another user modified table (NNM1) when trying to add a numbering series to any of the document.
    i have recently upgraded to 2007 B PL 10. only after this i face this problem.
    Please help me..
    thanks and regards,
    Yeshwanth Prakash

    Dear Prakash,
    Kindly check note 1128871 and 1330697. The issue you are facing is an application error which is fixed in SAP Business One 2007 B Patch 13.
    Even after upgrade to latest patch you get this error, Kindly run the following query in your DB and if it returns any result, log a message to SAP Support.
    select *
    from nnm1
    where objectcode like '@%'
    order by 1
    Regards,
    Varun
    SAP Business One Forum Team

  • Unable to  select multiple with holding tax codes. -"This entry already exists in the following tables  '' (ACPR) (ODBC -2035)  [Message 131-183]"

    Unable to  select multiple with holding tax codes.
    This entry already exists in the following tables  '' (ACPR) (ODBC -2035)  [Message 131-183]

    Hi,
    Actually this is an application error in 2007 A and there is no version/PL to fix this issue.
    Refer SAP note 1260874 - Cannot add a new BP with ITW tax code
    Thanks & Regards,
    Nagarajan

  • Another user-modified table (VPM1)

    Dear Experts,
    I faced the above error when trying to add outgoing payment.
    Firstly, I saved the outgoing payment as a draft. Then, I open the outgoing payment draft through payment draft report.
    Before I add the outgoing payment draft into valid outgoing payment document, I have to confirm and update the check number in payment mean.
    Finally I save the outgoing payment. However, system doesn't allow to save this draft into valid document and display error "Another user-modified table (VPM1) (ODBC-2039) [Message 131-183]". Please help!

    Dear Teng,
    It seems to be a database corruption issue.
    We would like to suggest you to open a message for SAP Support.
    Regards,
    Rakesh Pati
    SAP Business One Forum Team.

  • Another user-modified table 'Product Tree' (OITT) - Error message

    Hi
    Our B1 2005A SP01 PL48 sometimes shows the following error message when trying to change a BOM, even if this error is not possible.
    Another user-modified table 'Product Tree' (OITT) (ODBC -2039) [Message 131-183]
    What can I do, except for deleting and recreating the BOM?
    Thanks
    Franz

    Hi Franz,
    Please check these threads to find anything in common:
    Another user-modified table  'Items' (ODBC -2039)
    Another User modified Table (ODBC -2039) - Sales order
    In Purchase Order
    Re: Warehouse alerts not popping up.
    Thanks,
    Gordon

  • Another User-modified Table [Message 131-183]

    Hi Expert,
    My client tries to add the Sales Quotation and get a following error message.
    "Another User-modified Table u201C(QUT1) (ODBC -2039) [Message 131-183]"
    And also canu2019t add as a draft either.
    Using: 2007A PL42
    I checked notes and Forum but canu2019t solve this issue.
    Please help me.
    Thank you!
    Naoko

    "Another User-modified Tableu201C is a very common problem.  It is either caused by a bug or the result of actually another user locked the record.
    If you could not find any other clues, log to SAP support. In the mean time, try to reproduce it in the test environment.
    Thanks,
    Gordon

  • Error: Another User Modified Table in Service Call in SAP B1 8.8 PL9

    Hi Experts,
    We are facing an issue in SAP B1 8.8 Patch 9 in Service Call.  When taking service calls continuosly, when we try to update every 3rd Service Call the following error is coming
    "Another user or another operation modified data; to continue, open the window again  'Service Calls' (OSCL) (ODBC -2039)  [Message 131-183]".
    Only 1 user is using the service call.. Several times we logged out and logged in, still the same error is coming,
    Kindly help to solve this.
    Regards
    Sundaram

    Hi
    You may check this thread. It might be a bug.
    Re: another user modify table error on Service call
    Thanks,
    Gordon

  • Another user-modified table... Errors

    Dear Experts,
    Two of our clients are experiencing same error message but different Table name and scenario.
    First: Customer1 change the password of Manager account and it became successful. But when they change the password again, they encounter the u201CAnother user-modified table 'Users'(OUSR)...u201D error message.
    Second: Customer2 can't change the Item description in Item Master Data. When they try to update the description, the "Another user-modified table 'Items'(OITM)(ODBC-2039)[Message 131-183]"  error message appears.
    I've read some of the preferred solutions but the same issue occurs.
    Are these considered as bugs?
    Please help us.
    Thank you so much.
    Regards,
    Doriza Cortez

    Dear Doriza Cortez,
    All those errors are caused by table locks. Users have at least to exit from B1 for all their sessions. If the problem still persist, restart server is the last cure. Before that, you can try to kill certain hidden session from SQL Studio.
    Thanks,
    Gordon

Maybe you are looking for

  • Bath process stopped working after upgrading from Acrobat Pro 7.1 to 8.1.3

    I have a batch process that was working in Acrobat 7.1 Professional on that no longer works when using Acrobat 8.1.3. It essentially takes a PDF sizes it down, puts a stationary behind it, watermarks it with the month and moves on to the next file. M

  • PDF's printing.

    Hello, I have a user that occasionally prints PDF attachments from her emails. Every so often the printouts come out, (a lack for a better word) garbelled. I have notice that the printed characters are one character off from what they should be. I.E.

  • My iPad will mirror music through my Apple TV but not my keynote presentations

    My iPad will only airplay music through my apple tv keynote will not mirror. I'm kind of confused because I just mirrored in our classroom at work Friday with no issues at all. Any suggestions.

  • Shopping cart approvers are picked from ECC

    Hi Experts, we are working in SRM 5.0, our approvers are maintained in ECC and the logic is built to pick the approvers . please advise on the below queries. 1. we are unable to view the approvers in approval preview before the SC is ordered , can se

  • G5 Xserve

    Hi There. I have a problem with one of my G5 Xserves. The problem is it does not seem to be recognizing the hard drives. I am trying to determine if it is the caddie or the machine or the drives. I had purchased two new WD 250gb HDDs because of the f