Another version of 'out of memory' error

Hi all
I have a colleague who is getting the following error message.
As discussed...when I attempt to render a clip on the timeline, once it
gets to the end of the rendering process and attempts to play the clip, an
'out of memory' error message box appears on the screen.
Then when I click on 'OK' to close this box, the canvas window turns to red
and the following message displays in the canvas window...'Out of memory.
Free up memory and window will redraw.'
He is using HDV footage captured with the "HDV" codec [not the intermediate one], and editing it into HDV1080i50 sequences.
He has a G5 DP 2 GHZ machine running Tiger 10.4.2 and 2 GB of ram.
He has approx 80 GB free space on Mac HD and approx 400 GB on external Lacie HD. He is running only FCP HD 5 at any one time.
I have sourced some previous posts which speak of corrupt graphics, clips, sequences and trashing fcp prefs.
Does anyone have any other suggestions for him?
[He is quite new to macs and FCP especially].
I am going to send him an email to subscribe and create an account for this forum, his name is AGebhardt.

Hello,
I had the same issue last night, when a render (only 15 min., so not THAT big) completed and would not play and the canvas turned red and said I was out of memory.
This is different than a general error! out of memory warning, which I have seen happen. Some of the answers in linked threads seem to be pointing to this other situation.
I have plenty of space and plenty of RAM and was only running iTunes. I quit iTunes and it worked, almost to my disappointment because in the past I have had many apps working at a time with no problems,
I would be pretty bummed if I could only have FCP open all of a sudden.
I will try going through my clips to check for corruptions as suggested just to be on the safe side, but have a question;
What good is it to throw out your render files if you have already checked to see if you have enough storage space? I can see the good if a file is corrupt, but with every project a new render folder is created and unless there is a limit on these folders that I'm unaware of I can't see the sense in trashing the folder.
Am I missing something?
Thanks,
Jesse
733 G4    

Similar Messages

  • Getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1. It is creating issue to convert PDF into TIFF. Please provide the solution ASAP

    Hello All,
    I am getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1.
    Also, it is creating issue to convert PDF into TIFF. Please provide the solution ASAP.

    I am using Adobe reader XI. When i open PDF it gives "OUT of memory" error after scrolling PDF gives another alert "Insufficient data for an image". after clicking both alerts it loads full data of PDF. It is not happening with all PDFs. couple of PDFs are facing this issue. Because of this error my software is not able to print these PDFS into TIFF. My OS in window7*64. I tried it on win2012R2 and XP. Same issue is generating there.
    It has become critical issue for my production.

  • Photoshop CS6 has out of memory errors under Mac OS X 10.7.4

    Has anyone who has a 2008 MacBoo Pro with the NVIDIA GeForce 8600M GT 512 MB graphics card tried running Photoshop CS6 under Mac OS X 10.7.4?
    On my MacBook Pro, PS CS6 launches; however, any action results in an out of memory error.  The CS6 versions of After Effects, Premiere Pro and Illustrator all launch and run as expected under 10.7.4.
    If I switch to my Mac OS X 10.6.8 startup volume, Photoshop CS6 runs as expected.
    I have support cases open with Adobe, NVidia and Apple.  Adobe thinks I need to update the display drivers.  NVidia says display drivers must be provided by Apple.  Apple says that the display drivers are current.  The Apple support agent said that he can escalate the case if the issue can be reproduced on more than one computer.
    I'd love to keep my MacBook Pro running another year or so without having to reboot in 10.6.8 every time I need to use Photoshop.  I'd stay with 10.6.8, but of course iCloud requires 10.7.4.
    I have not tried 10.8 yet, but it's on my troubleshooting list.
    Also, PS CS6 runs fine under Mac OS X 10.7.4 on my 2010 iMac.
    Thanks in advance for any feedback.
    - Warren

    It looks like it was indeed the display driver for the NVIDIA GeForce 8600 GT 512 MB graphics card inside my 2008 MacBook Pro.
    It seems that this driver only gets installed if you upgrade from Mac OS X 10.6.7 to 10.7.4 while the startup drive is connected to the MacBook Pro itself.  I had updated while the startup drive was connected to my 2010 iMac. Accordingly, I could have reinstalled Photoshop 100 times without it ever launching as expected.  Having used the external startup drive with three other Apple computers (all 2010 or newer machines) with Photoshop CS6 launching as expected, I had just assumed (mistakenly) that it would work as expected with my 2008 computer.
    So, this was simple enough to resolve by upgrading the OS on the external startup drive while having it connected to the MacBook Pro.   In hindsight, this makes perfect sense.
    -Warren

  • Photoshop out of memory error

    Hi, I am running in a mixed enviroment with Open Directory master for authentication on a Snow Leopard OS 10.68 server, with both Lion and Snow Leopard client machines. My Users, due to Adobe products crashing with none mobile accounts, are using external hard drives formatted OS Extended (Journaled) with their mobile account setup on that Hard Drive. This year it has been touch and go on login issues but working throught that. My problem is when a user uses a Lion machine 10.7.4 and Photoshop extended and then moves to our study lab which has Snow Leopard, photoshop workspaces are corrupted and they cannot open any photo's or settings, they get an "Out of memory" error. However when they go back to the Lion machine and after resetting their workspace they can use the software without issues. Anyone else hiving these issues? Ive tried chflags nohidden library in Snow Leopard to view settings, even deleted all photoshop settings in App data and preferences and still cannot access photoshop on SL machine.
    Thanks

    Thanks Kurt for the reply. I'll give more info. All machines have latest updates for both CS6 and current version of OS either 10.6.8 or 10.7.4.
    The only thing on the external hard drive is the user's home folder and their Data, I have to have permissions enabled so their home preferences and WGM settings work correctly. BTW all accounts have admin rights to machine, I have WGM settings preventing access to machine settings and can re-image if i get corrupted machines.
    PS is installed on each machine not the  External Hard Drive.
    All machines have the same Volume name for the internal boot drive, which is set as the PS scratch drive.
    I thought this issue was to do with the memory and may still be so.
    However when a clean profile is connected to our towers with Lion which has 12 gb ram and 1024 MB Video Memory, the settings are at 70% which is around 8 gb.
    When i take same clean profile to our other lab of iMacs which has 8 gb ram. and 512 mb video memory, PS adjusts the performance ram accordingly which is around 5.5 gb ram at 70%.
    I then take that same external drive to the problem iMac's (early 2009 and 2008) which has 4gb ram 256 video memory and is running Lion, PS adjust to 2.4 gb ram.
    Now i put that same drive on the same model, 2009 or 2008 iMac that has Snow Leopard running on it from same model Lion iMac,PS opens fine.
    However after moving from one of the other larger Lion machines and then back to this Snow Leopard machine, the profile gets corrupted, the workspace is corrupted and cannot reset it. Also I am unable to access any settings I get the "Could not complete the operation because there is not enough memory (RAM)" error.
    Now when I go back to a same model Lion machine with same minimum memory i get the same error, however when I go to a larger Lion machine all I get is Color profile cannot sync and the workspace is still corrupted and not showing but I can reset it.
    I then move the performance size to match that of the lower model’s 70%, I still get the error when I go back to the lower end Lion or Snow Leopard machine.
    I tried clearing PS preferences by opening with command+option+shift and delete PS preferences the issue is still there.
    I then remove all PS ~/Library/ settings for PS and it is still present.
    I had to re-create the profile all together to get this to work. As long as I don’t connect to a low end Snow Leopard machine things seem to be going well and PS readjust according to the machine, note, when I set the performance level to a low setting let's say 2.5 gb as on the early iMacs and plug into another machine, PS adjusts to the current machine' mamory availability and does not keep that lower setting setting.
    I have a copy of console error message below.
    9/18/12 2:31:51 PM Adobe Photoshop CS6[254] *** __NSAutoreleaseNoPool(): Object 0x10aa114d0 of class NSCFString autoreleased with no pool in place - just leaking
    9/18/12 2:31:51 PM Adobe Photoshop CS6[254] *** __NSAutoreleaseNoPool(): Object 0x106d65010 of class NSBundle autoreleased with no pool in place - just leaking
    9/18/12 2:31:51 PM Adobe Photoshop CS6[254] *** __NSAutoreleaseNoPool(): Object 0x11db6aa60 of class NSCFString autoreleased with no pool in place - just leaking
    9/18/12 2:31:51 PM Adobe Photoshop CS6[254] *** __NSAutoreleaseNoPool(): Object 0x10a98bc40 of class NSCFString autoreleased with no pool in place - just leaking
    9/18/12 2:31:51 PM Adobe Photoshop CS6[254] *** __NSAutoreleaseNoPool(): Object 0x1371a73e0 of class NSCFData autoreleased with no pool in place - just leaking
    9/18/12 2:31:51 PM Adobe Photoshop CS6[254] *** __NSAutoreleaseNoPool(): Object 0x1371f7320 of class NSCFData autoreleased with no pool in place - just leaking
    I have 12 Snow Leopard machines that are early 2008 and 2009 imac and no way to up upgrading to Lion and I am not ready for Mountain Lion to go into production untill I can upgrade my OD masters to Mountain Lion.
    I suspect it's not the ram settings that are affected but the video ram is not adjusting from machine to machine, is it possible to upgrade the 2009 20" iMac video cards and get proper firmware support?
    any help is appreciated.

  • Can anyone help with an out of memory error on CS2?

    Hello,
    I have been battling with an out of memory error on a dell laptop running 2gb of ram. I have had no prior issues with this laptop running CS2 until last week when I started getting the out of memory errors. I have seen several articles about this occuring on later versions of illustrator. Just prior to this issue appearing I had to delete and rebuild the main user profile on the computer due to it consistently logging into a temporary account.
    Once the new profile was established and all user documents and profile settings were transferred back into it, this problem started showing up. The error occurs when clicking on files listed as Illustrator files, and when opening the illustrator suite. Once I click on the out of memory error it still continues to load illustrator. The files are located on a server and not on the remote computer. I have tried to copy the files to the local hard drive with the same result when I try to open them. I also tried to change the extension to .pdf and got no further. I tried to open a file and recreate the work and all I got was the black outline of the fonts. none of the other artwork appeared. once rebuilt, when trying to save, It gives the out of memory error and does not save the file.
    Illustrator was installed on another dell laptop, same model, etc and works fine. no problem accessing network files. I just attempted to use Illustrator from the admin profile on the machine in question and it works fine and lightening fast. Just not from the new rebuilt profile. I have tried to uninstall and reinstall the software. it has not helped. could there be stray configuration settings that we transfered over to the new profile that should not have been?
    Any insights will be helpful.
    Thank You,
    Brad Yeutter

    Here are some steps that could help you:
    http://kb2.adobe.com/cps/320/320782.html
    http://kb2.adobe.com/cps/401/kb401053.html
    I hope this helps!

  • InDesign - out of memory error

    Hi All,
    One of a clients is experiencing a issue whilst using InDesign CS4 version 6.0.5, they are constantly interrupted by an “Out of Memory” error while using InDesign.
    They have been experiencing this issue for some time now and we have performed memory upgrades and also upgraded to version 6.0.5 (which was meant to solve the issue) several months ago and yet they are still getting this issue.
    The issue that they are experiencing is the following error that was said to have been resolved in the 6.0.5 update.
    Document containing hundreds of text frames and custom baseline grids takes a long time to open and
    causes an “out of memory” error, followed by an unexpected quit. [2253219]
    Has there been another hot fix or a known resolution for this issue? Anyone else experiencingthis?
    Cheers,
    Allan

    Hi Scott,
    Their system has the following specs;
    OS:     Windows Vista Business 32-Bit
    RAM:  3GB DDR2
    CPU:   E8400 @ 3.00Ghz (Dual Core)
    Garphics: Onboard intel G33/G31
    Regards,
    Allan

  • Uploading large files from applet to servlet throws out of memory error

    I have a java applet that needs to upload files from a client machine
    to a web server using a servlet. the problem i am having is that in
    the current scheme, files larger than 17-20MB throw an out of memory
    error. is there any way we can get around this problem? i will post
    the client and server side code for reference.
    Client Side Code:
    import java.io.*;
    import java.net.*;
    // this class is a client that enables transfer of files from client
    // to server. This client connects to a servlet running on the server
    // and transmits the file.
    public class fileTransferClient
    private static final String FILENAME_HEADER = "fileName";
    private static final String FILELASTMOD_HEADER = "fileLastMod";
    // this method transfers the prescribed file to the server.
    // if the destination directory is "", it transfers the file to
    "d:\\".
    //11-21-02 Changes : This method now has a new parameter that
    references the item
    //that is being transferred in the import list.
    public static String transferFile(String srcFileName, String
    destFileName,
    String destDir, int itemID)
    if (destDir.equals(""))
    destDir = "E:\\FTP\\incoming\\";
    // get the fully qualified filename and the mere filename.
    String fqfn = srcFileName;
    String fname =
    fqfn.substring(fqfn.lastIndexOf(File.separator)+1);
    try
    //importTable importer = jbInit.getImportTable();
    // create the file to be uploaded and a connection to
    servlet.
    File fileToUpload = new File(fqfn);
    long fileSize = fileToUpload.length();
    // get last mod of this file.
    // The last mod is sent to the servlet as a header.
    long lastMod = fileToUpload.lastModified();
    String strLastMod = String.valueOf(lastMod);
    URL serverURL = new URL(webadminApplet.strServletURL);
    URLConnection serverCon = serverURL.openConnection();
    // a bunch of connection setup related things.
    serverCon.setDoInput(true);
    serverCon.setDoOutput(true);
    // Don't use a cached version of URL connection.
    serverCon.setUseCaches (false);
    serverCon.setDefaultUseCaches (false);
    // set headers and their values.
    serverCon.setRequestProperty("Content-Type",
    "application/octet-stream");
    serverCon.setRequestProperty("Content-Length",
    Long.toString(fileToUpload.length()));
    serverCon.setRequestProperty(FILENAME_HEADER, destDir +
    destFileName);
    serverCon.setRequestProperty(FILELASTMOD_HEADER, strLastMod);
    if (webadminApplet.DEBUG) System.out.println("Connection with
    FTP server established");
    // create file stream and write stream to write file data.
    FileInputStream fis = new FileInputStream(fileToUpload);
    OutputStream os = serverCon.getOutputStream();
    try
    // transfer the file in 4K chunks.
    byte[] buffer = new byte[4096];
    long byteCnt = 0;
    //long percent = 0;
    int newPercent = 0;
    int oldPercent = 0;
    while (true)
    int bytes = fis.read(buffer);
    byteCnt += bytes;
    //11-21-02 :
    //If itemID is greater than -1 this is an import file
    transfer
    //otherwise this is a header graphic file transfer.
    if (itemID > -1)
    newPercent = (int) ((double) byteCnt/ (double)
    fileSize * 100.0);
    int diff = newPercent - oldPercent;
    if (newPercent == 0 || diff >= 20)
    oldPercent = newPercent;
    jbInit.getImportTable().displayFileTransferStatus
    (itemID,
    newPercent);
    if (bytes < 0) break;
    os.write(buffer, 0, bytes);
    os.flush();
    if (webadminApplet.DEBUG) System.out.println("No of bytes
    sent: " + byteCnt);
    finally
    // close related streams.
    os.close();
    fis.close();
    if (webadminApplet.DEBUG) System.out.println("File
    Transmission complete");
    // find out what the servlet has got to say in response.
    BufferedReader reader = new BufferedReader(
    new
    InputStreamReader(serverCon.getInputStream()));
    try
    String line;
    while ((line = reader.readLine()) != null)
    if (webadminApplet.DEBUG) System.out.println(line);
    finally
    // close the reader stream from servlet.
    reader.close();
    } // end of the big try block.
    catch (Exception e)
    System.out.println("Exception during file transfer:\n" + e);
    e.printStackTrace();
    return("FTP failed. See Java Console for Errors.");
    } // end of catch block.
    return("File: " + fname + " successfully transferred.");
    } // end of method transferFile().
    } // end of class fileTransferClient
    Server side code:
    import java.io.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.util.*;
    import java.net.*;
    // This servlet class acts as an FTP server to enable transfer of
    files
    // from client side.
    public class FtpServerServlet extends HttpServlet
    String ftpDir = "D:\\pub\\FTP\\";
    private static final String FILENAME_HEADER = "fileName";
    private static final String FILELASTMOD_HEADER = "fileLastMod";
    public void doGet(HttpServletRequest req, HttpServletResponse resp)
    throws ServletException,
    IOException
    doPost(req, resp);
    public void doPost(HttpServletRequest req, HttpServletResponse
    resp)
    throws ServletException,
    IOException
    // ### for now enable overwrite by default.
    boolean overwrite = true;
    // get the fileName for this transmission.
    String fileName = req.getHeader(FILENAME_HEADER);
    // also get the last mod of this file.
    String strLastMod = req.getHeader(FILELASTMOD_HEADER);
    String message = "Filename: " + fileName + " saved
    successfully.";
    int status = HttpServletResponse.SC_OK;
    System.out.println("fileName from client: " + fileName);
    // if filename is not specified, complain.
    if (fileName == null)
    message = "Filename not specified";
    status = HttpServletResponse.SC_INTERNAL_SERVER_ERROR;
    else
    // open the file stream for the file about to be transferred.
    File uploadedFile = new File(fileName);
    // check if file already exists - and overwrite if necessary.
    if (uploadedFile.exists())
    if (overwrite)
    // delete the file.
    uploadedFile.delete();
    // ensure the directory is writable - and a new file may be
    created.
    if (!uploadedFile.createNewFile())
    message = "Unable to create file on server. FTP failed.";
    status = HttpServletResponse.SC_INTERNAL_SERVER_ERROR;
    else
    // get the necessary streams for file creation.
    FileOutputStream fos = new FileOutputStream(uploadedFile);
    InputStream is = req.getInputStream();
    try
    // create a buffer. 4K!
    byte[] buffer = new byte[4096];
    // read from input stream and write to file stream.
    int byteCnt = 0;
    while (true)
    int bytes = is.read(buffer);
    if (bytes < 0) break;
    byteCnt += bytes;
    // System.out.println(buffer);
    fos.write(buffer, 0, bytes);
    // flush the stream.
    fos.flush();
    } // end of try block.
    finally
    is.close();
    fos.close();
    // set last mod date for this file.
    uploadedFile.setLastModified((new
    Long(strLastMod)).longValue());
    } // end of finally block.
    } // end - the new file may be created on server.
    } // end - we have a valid filename.
    // set response headers.
    resp.setContentType("text/plain");
    resp.setStatus(status);
    if (status != HttpServletResponse.SC_OK)
    getServletContext().log("ERROR: " + message);
    // get output stream.
    PrintWriter out = resp.getWriter();
    out.println(message);
    } // end of doPost().
    } // end of class FtpServerServlet

    OK - the problem you describe is definitely what's giving you grief.
    The workaround is to use a socket connection and send your own request headers, with the content length filled in. You may have to multi-part mime encode the stream on its way out as well (I'm not about that...).
    You can use the following:
    http://porsche.cis.udel.edu:8080/cis479/lectures/slides-04/slide-02.html
    on your server to get a feel for the format that the request headers need to take.
    - Kevin
    I get the out of Memory Error on the client side. I
    was told that this might be a bug in the URLConnection
    class implementation that basically it wont know the
    content length until all the data has been written to
    the output stream, so it uses an in memory buffer to
    store the data which basically causes memory issues..
    do you think there might be a workaround of any kind..
    or maybe a way that the buffer might be flushed after
    a certain size of file has been uploaded.. ?? do you
    have any ideas?

  • Adobe X Pro 10.1.10 Out of Memory error message

    Hello One, Hello All
    Since updating our Adobe X Pro machines to version update 10.1.10, we occasionally receive an "Out of Memory" error message, which depending on what we are doing, may force us to shutdown all Adobe windows and re-open Adobe, or simply click OK and continue working with the PDF document like nothing is wrong. It seems to have no rhyme or reason to when or why it occurs. I do not see any warnings or errors in the Windows Event Log. It happens with files we have created, and also happens with files received from internal and external sources through email. It is affecting our high end machines: Lenovo X Series and W Series laptops with Windows 8.1 3rd/4th gen i5 CPUs, 8+GB RAM, 128+GB SSD's. We have all system and Windows updates applied. We have Trend Micro and Malwarebytes real-time protection and system scans do not find any malware.
    I have found a few other recent threads on Adobe forum related to this error message but the responses are weak at best with no definitive fix. The system and user temp folders size are less than 100MB each so this cannot be the issue. When the error occurs I check task manager and system utilization, including memory, is well below 100%.
    We did not have this issue prior to version update 10.1.10.
    Really hoping Adobe can step in to help here and hoping boilerplate responses are not used.

    Hi wayne103,
    We released a new security update yesterday that is v10.1.11
    Please update to this version and check the performance.
    I have seen this error message occur while opening a 3rd party created pdf that has corrupted file structure.
    Please let me know if the issue occurs for some specific files or random
    Also let me know the PDF producer for these pdfs.
    Regards,
    Rave

  • JavaScript Out of Memory Error on Portal timeout.

    Hello All,
    I am using jsf and Inline navigation in all our portlets and when user leave the browser idle for portal timeout we have 2 problems. 1: Login portlet shows in that specific portlet. 2: we get a javascript alert saying out of memory at line 40. and the porltet shows error message as "Gateway was not able to access requested content. If the error persists, contact your portal Administrator."
    We are using Plumtree 5.0.4 Java version.
    any help is highly appreciated.
    Thanks
    A.J.

    Both are valid behaviors unfortunately.
    1) login portlet is showing up in specific portlet b/c inline navigation allows for you to create and load pages without affecting the overall portal.
    This happens when you use iframes (which behave in a similar fashion).
    - your only workaround is really to write some javascript function to "listen" to the portal login page getting loaded and then throwing the session into the parent browser (which is Portal). At least this is the only solution that I ever came up with when using Iframes.
    2) Don't know about out of memory error actually, but getting the "gatewy was not able to access requested content" is valid b/c the session died.
    - javascript errors require javascript solutions. Sorry I couldn't be more helpful than that.
    Maybe someone else will have better suggestions.
    The other suggestion is to use your app server to listen to the logout event and redirect appropriately to somewhere else, or have it do what you want it to do in situations as this.

  • Report with more than 600 kb image - BO Server getting Out Of memory Error

    Hi,
       We have a report which displays images and size is above 600 KB.We are getting an "Out Of memory" Error while previewing this report in Business Object Server.
    In another situation we tried by giving a dynamic path to the OLE object, but the report is not showing error. We are not able to view the image whose size is more than 600KB
    Notes: 1. Image is stored as a BLOB  in Oracle Database
               2. Connection used inside the report is OLEDB
               3. UNIX Environment
    Regards,
    Sathish

    Please re-post if this is still an issue to the Business Objects Forum or if you have a valid support contract create a case on line.

  • Large Pdf using XML XSL - Out of Memory Error

    Hi Friends.
    I am trying to generate a PDF from XML, XSL and FO in java. It works fine if the PDF to be generated is small.
    But if the PDF to be generated is big, then it throws "Out of Memory" error. Can some one please give me some pointers about the possible reasons for this errors. Thanks for your help.
    RM
    Code:
    import java.io.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    import org.xml.sax.InputSource;
    import org.xml.sax.XMLReader;
    import org.apache.fop.apps.Driver;
    import org.apache.fop.apps.Version;
    import org.apache.fop.apps.XSLTInputHandler;
    import org.apache.fop.messaging.MessageHandler;
    import org.apache.avalon.framework.logger.ConsoleLogger;
    import org.apache.avalon.framework.logger.Logger;
    public class PdfServlet extends HttpServlet {
    public static final String FO_REQUEST_PARAM = "fo";
    public static final String XML_REQUEST_PARAM = "xml";
    public static final String XSL_REQUEST_PARAM = "xsl";
    Logger log = null;
         Com_BUtil myBu = new Com_BUtil();
    public void doGet(HttpServletRequest request,
    HttpServletResponse response) throws ServletException {
    if(log == null) {
         log = new ConsoleLogger(ConsoleLogger.LEVEL_WARN);
         MessageHandler.setScreenLogger(log);
    try {
    String foParam = request.getParameter(FO_REQUEST_PARAM);
    String xmlParam = myBu.getConfigVal("filePath") +"/"+request.getParameter(XML_REQUEST_PARAM);
    String xslParam = myBu.SERVERROOT + "/jsp/servlet/"+request.getParameter(XSL_REQUEST_PARAM)+".xsl";
         if((xmlParam != null) && (xslParam != null)) {
    XSLTInputHandler input = new XSLTInputHandler(new File(xmlParam), new File(xslParam));
    renderXML(input, response);
    } else {
    PrintWriter out = response.getWriter();
    out.println("<html><head><title>Error</title></head>\n"+
    "<body><h1>PdfServlet Error</h1><h3>No 'fo' "+
    "request param given.</body></html>");
    } catch (ServletException ex) {
    throw ex;
    catch (Exception ex) {
    throw new ServletException(ex);
    public void renderXML(XSLTInputHandler input,
    HttpServletResponse response) throws ServletException {
    try {
    ByteArrayOutputStream out = new ByteArrayOutputStream();
    response.setContentType("application/pdf");
    Driver driver = new Driver();
    driver.setLogger(log);
    driver.setRenderer(Driver.RENDER_PDF);
    driver.setOutputStream(out);
    driver.render(input.getParser(), input.getInputSource());
    byte[] content = out.toByteArray();
    response.setContentLength(content.length);
    response.getOutputStream().write(content);
    response.getOutputStream().flush();
    } catch (Exception ex) {
    throw new ServletException(ex);
    * creates a SAX parser, using the value of org.xml.sax.parser
    * defaulting to org.apache.xerces.parsers.SAXParser
    * @return the created SAX parser
    static XMLReader createParser() throws ServletException {
    String parserClassName = System.getProperty("org.xml.sax.parser");
    if (parserClassName == null) {
    parserClassName = "org.apache.xerces.parsers.SAXParser";
    try {
    return (XMLReader) Class.forName(
    parserClassName).newInstance();
    } catch (Exception e) {
    throw new ServletException(e);

    Hi,
    I did try that initially. After executing the command I get this message.
    C:\>java -Xms128M -Xmx256M
    Usage: java [-options] class [args...]
    (to execute a class)
    or java -jar [-options] jarfile [args...]
    (to execute a jar file)
    where options include:
    -cp -classpath <directories and zip/jar files separated by ;>
    set search path for application classes and resources
    -D<name>=<value>
    set a system property
    -verbose[:class|gc|jni]
    enable verbose output
    -version print product version and exit
    -showversion print product version and continue
    -? -help print this help message
    -X print help on non-standard options
    Thanks for your help.
    RM

  • N97 out of memory errors

    The product is N97, you don’t have in you drop down list!!!
    I have had my n97 for about 10 days now and everything was going brilliant. It is a stunning piece of kit.
    However on day 11. I repowered the n97, it kept on hanging the eventually got to boot after 20 attempts, but it was useless could not look up contacts. So I had taskman installed and killed loads of processes and uninstalled all the apps. It became usable as a very basic phone, but sluggish. Could use browser, maps, photos.
    The problem is I keep on experiencing out of memory errors on the phone, when I try to do basic things. I don’t know how to resolve this. I have rebooted, reset the phone to factory settings.
    Deleted data, uninstalled more apps and still no joy!! I cannot connect to ovi/pc suite to up grade the phone or roll it back.
    Symptoms the phone is sluggish it is still virtually unusable. It just barely make phones and is slow to respond to touch-screen presses and key presses.
    The taskman app says the is 47 mb free on C: drive. So I cant see what the problem is!!!
    I have always bought nokia for 10 years, never experience this sort of thing before.  I am really disappointed with this.
    Anybody else experienced this? Any ideas?
    Many thanks
    Gd
    Solved!
    Go to Solution.

    Copyless thanks for the tip.  Kudos added :-)
    I had the same problem a friend was trying to bluetooth some videos to me and I was getting Memory problem, How embarasing after a few min of my mates being impressed with the phone, and me praising it and talking about so much space and blah blah blah.
    I could not receive videos via bluetooth because they were 5MB.  WHY on EARTH can they not default this to the E: drive.
    Whoever made that decision in NOKIA should be fired what an idiot.
    Also  when I finally got to get the pictures on the phone via a computer I could not see them via the "Photos"  I had to go via the File Manager and see one by one.  AARRRRRRRRGHHH  I am getting to the point that I am going to return this phone.
    N97 Black unlocked using the 3 Network (UK). Product Code 0586308. Firmware V20.0.019. Made In Finland.Custom version V20.019.235.10.

  • ERROR [B3108]: Unrecoverable out of memory error during a cluster operation

    We are using Sun Java(tm) System Message Queue Version: 3.5 SP1 (Build 48-G). We are using two JMS servers as a cluster.
    But we frequently getting the out of memory issue during the cluster operation.
    Messages also got queued up in the Topics. Eventhough listeners have the capability to reconnect with the Server after the broker restarting, usually we are restarting consumer instances to get work this.
    Here is detailed log :
    Jan 5 13:45:40 polar1-18.eastern.com imqbrokerd_cns-jms-18[8980]: [ID 478930 daemon.error] ERROR [B3108]: Unrecoverable out of memory error during a cluster operation. Shutting down the broker.
    Jan 5 13:45:57 polar1-18.eastern18.chntva1-dc1.cscehub.com imqbrokerd: [ID 702911 daemon.notice] Message Queue broker terminated abnormally -- restarting.
    Expecting your attention on this.
    Thanks

    Hi,
    If you do not use any special cmdline options, how do you configure your servers/
    brokers to 1 Gb or 2 Gb JVM heap ?
    Regarding your question on why the consumers appear to be connecting to just
    one of the brokers -
    How are the connection factories that the consumers use configured ?
    Is the connection factory configured using the imqAddressList and
    imqAddressListBehavior attributes ? Documentation for this is at:
    http://docs.sun.com/source/819-2571/ref_adminobj_props.html#wp62463
    imqAddressList should contain a list of brokers (i.e. 2 for you) in the cluster
    e.g.
    mq://server1:7676/jms,mq://server2:7676/jms
    imqAddressListBehavior defines how the 2 brokers in the above list are picked.
    The default is in the order of the list - so mq://server1:7676/jms will always be
    picked by default. If you want random behavior (which will hopefully even out the
    load), set imqAddressListBehavior to RANDOM.
    regards,
    -i
    http://www.sun.com/software/products/message_queue/index.xml

  • Indesign cs5.5 out of memory error

    Hi,
    I am having constant problems with out of memory errors in indesign cs5.5 (version 7.5.3).  I am on a mac. Everything is up to date, I have preflight off, my display performance is on typical view and have tried restarted my computer multiple times.  I do not have any other programs open and the document I have open is 3 pages (8.5x11) with little content and a couple links to small images.  I do not know what to do!  This is affecting my job and my performance!! Please help!!!  Thank you!

    close the application
    Rename the preferences from the following location
    /Users/[User Name]/Library/Preferences/Adobe InDesign/Version #
    /Users/[User Name]/Library/Caches/Adobe InDesign/Version [#]
    then open a new document and then open the document you are facing an issue with it should clear the memory issue temporally
    Alternate :
    copy and paste the content in a new document and check if the 1st option does not work
    PS : changing the folder name would reset the preferences
    refer to KB : InDesign preferences and support file locations

  • Out of Memory Errors when Exporting Slideshows

    Hi -
    I've been using LR for sometime now. Today, for the first time ever, I attempted to export a slideshow as a .pdf file, 90% quality setting, 48 slides total. LR created a 41MB file. However, when I played it back, there were many slides which only showed an empty frame with the message "out of memory error" upside down in the lower left corner of the frame. The same slides displayed the message each time I played it, so I'm sure the problem stemmed from creating the file, not showing it.
    I have a core 2 duo machine with 4GB Ram and no other applications running at the time I exported the slideshow.
    Any thoughts on this? BTW, I'm running version 1.2
    Thanks!
    E-

    Try restarting and reexporting. OOM errors have little to do with how much memory you have or how much is available.

Maybe you are looking for

  • Coping from quantity contract to sales order

    Hi all, I  have  fixed  to  coy  rules  from  Contract  to Sales order . The  only  problem  I  have  is  that  If  I  dont  copy  the  BOM  header,the  sub  Item  number  in  the  sales  order  is  copied  as  its  in  contract-And  I  need  new  nu

  • Updating Dynamic website with CSV database

    I have a question. I am very new to dynamic sites. I am working in dreamweaver, navicat, mysql and coldfusion to create a site that reads from a csv database. My question is this: The csv file is updated daily to reflect changes in inventory. Again,

  • I get an DOWNLOAD ERROR on the apps menu

    I Keep getting a DOWNLOAD ERROR in the apps center in creative cloud. I need help getting it fixed but I've was put on hold for 30 minutes trying to get answers. Also all the apps I've bought in the past are now gone. how do i get them back?

  • Mac Mail on Mountain Lion

    Hi Just recently (a few days) all emails on our Mac when sent to other people or receive one show the full path of info like below: I have blanked out our email with xxxx but not sure why this is happening. Is there a setting that may have changed si

  • Authentification with Active Directory

    Hi all, i'm on a new project EP 6. My customer want to "integrate" EP 6 in his Intranet ; when the user clicks on a link located in the Intranet one must arrive in EP 6. The authentification must be transparent, my customer want to authenficate the u