[Answered] List of patches for Solaris 10 SPARC 64 bit!

Hi All,
Installation document for 10g Release 2 (10.2) for Solaris Operating System (SPARC 64-Bit) does not mention anything about patches required on Solaris 10 (there is a list for Solaris 8 and 9).
http://download.oracle.com/docs/cd/B19306_01/install.102/b15690/pre_install.htm#sthref110
Can I safely assume that the installation of Solaris 10 contains all the required patches in this case?
Thanks,
Edited by: Satish Kandi on Nov 19, 2008 10:21 AM

Hi Satish,
I did not have access to ORACLE metalink so could not able check the doc which you reffered. But Checked the ORACLE installation doc, I suppose that is the required patches for 8 and 9 which you have to make sure of on Solaris 10.
Other wise wait and see for other inputs too.
Hemanth might reply back some thing.
- Pavan Kumar N

Similar Messages

  • 10.2.0.3 Patch for solaris SPARC

    Hi All,
    We have 10.2.0.1 database running on Solaris Sparc.We are planning to upgrade to 10.2.0.3 directly instead of upgrading to 10.2.0.2
    Do we have the patch 10.2.0.3 ready to dowload from the metalink..
    If so please give me the patch number..
    Thanks In Advance for the reply ASAP

    Have not seen any fixed dates regarding the release of the 10.2.0.3 patchset. Searching Metalink showed some forum answers that suggest sometime in December 2006.

  • Will Instant Client 10.2.0.1 be available for Solaris 32-bit (SPARC)?

    The latest Instant Client release is currently not available for Solaris Sparc 32-bit.
    Does anyone know when it will be available?
    Thank you.

    It is available now.

  • OEPE Install for Solaris Sparc 64 bit

    Hello Experts,
    OEPE (Oracle Enterprise Plug-in for Eclipse) issue....
    We have installed the below @ Sun Solaris 10, Sparc 64 Bit.
    Web Logic 10.3.6
    SOA 11.1.1.6.0
    AIA 11.1.1.6.0
    trying to install OSB (Oracle Service Bus) and it asks about the OEPE Install location and gave an error.
    INST-07246 -- Enter a Valid value for OEPE Home location..
    We have NOT installed OEPE, because it is NOT available for the version and the platform we have.
    The OTN doc says as below:
    Oracle WebLogic Server 11gR1 (10.3.6) + Coherence - Package Installer Size: .99 GB, Check Sum: 3179053739
    This download provides a WebLogic Server generic installer. This installer does not include a JVM/JDK or Oracle Enterprise Plug-in for Eclipse, these must be installed separately.
    Question(s):
    1) Where can I get the OEPE for Solaris 64 bit and SOA 11.1.1.6.0?
    2) Any other workaround for the OSB install issue??
    Thanks a lot
    Rgds
    Natrajan

    Hi Natrajan,
    I don't think there is a Oracle packaged OEPE for Solaris 64... There is a Linux 64 though, but I don't think that is what you looking for...
    Here you can see the available packages
    http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/index.html
    What you can do is to install Eclipse for Solaris... and then go to the link above and download a package "OEPE Plugins Only" and apply the plugins to your Eclipse
    http://archive.eclipse.org/eclipse/downloads/drops/R-3.6-201006080911/solPlatform.php
    Cheers,
    Vlad
    It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
    https://forums.oracle.com/forums/ann.jspa?annID=893

  • Latest (November) EIS-Patching ISO for Solaris SPARC & X86 systems download.

    Hi All,
    I hope someone can assist as this has given me a headache for the last few days.
    I require the latest (November) EIS-Patching ISO for Solaris SPARC & X86 systems.
    I require the ISO and not just the Patch set.
    Please advise.
    Kind regards,
    Paul

    The current ISO (october) is available at the usual place : EIS for Partner
    And for information, the next planned EIS will be available very soon but not this month.

  • Can't download Oracle 8.1.7 Enterprise Edition for Solaris 32 bit??

    I can't download Oracle 8.1.7 Enterprise Edition for Solaris 32 bit. After filling out the form with the questions...I click on the actual link, but the box never pops up. The status bar on my Internet Explorer slowly increases, but never allows me to download. It just hangs. I have tried multiple times, and I can download other verions from your site...and have many times in the past. Could you please fix this. Thanks.

    I've looked at it and it seems fine. It might have been a temporary glitch - let us know if you continue to have trouble.
    OTN

  • Weblogic 10.3.3 to 10.3.5 patch for linux 64 bit

    hi,
    I need weblogic 10.3.3 to 10.3.5 patch for linux 64 bit.
    Thanks and regards,
    Edited by: 853559 on Jun 14, 2012 8:32 AM

    Hi,
    the patch URL you can get from:
    http://www.oratoolkit.ch/download/
    but the thing is that you need to be an oracle customer with a valid customer support id (CSI) to download it. Without CSI there is no chance to get the patch.
    Cheers,
    David
    OCP 9i / 10g
    http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

  • Last kernel patch for Solaris 10 x86 screwed up my kernel

    Hi,
    The last kernel patch for Solaris 10 x86 (sorry I can�t remember the patch id, but the revision is 30), available from Sun Update Manager screwed up my system.
    The system is still booting but in maintenance mode: smf can't start because of repository corrupted. Given instructions to restore the repository does not work because / filesystem is mounted read-only...
    As I am not a solaris expert, I will reinstall it from CD. I hope I won't loose the filesystem.
    I was used to blindly trust Sun solaris patches, that was a mistake.
    Laurent.

    i dont know why but still i do get default log in into the single mode
    after startup
    Requesting maintenance mode
    (See /lib/svc/share/README for aditional information. )
    Root password for system maintenance (control-d to bypass):i did removed the patch installed before so now
    SunOS jorgito 5.10 Generic_118844-26 i86pc i386 i86pcand finaly i do have milestone like this
    bash-3.00$ svcprop restarter | grep mile
    options/milestone astring svc:/milestone/multi-user:default
    dont know what to do else, also tried to synchronize boot-archive from solaris failsafe ...

  • OEM 12c for solaris (sparc) disk2 download failed

    I am trying to download OEM 12c for solaris (sparc) from below link but disk 2 download failed after 80% with a error saying connection to server closed. I tried it couple of times with different browsers even from different machine but still same error. Disk 1 downloaded successfully but disk2 always failed right at 80% after 2.4 GB downloaded. It makes me belive that it is a problem related to source file or server. Anyone has similar experience and know how to get it solved?
    Appriciate for your help.
    http://www.oracle.com/technetwork/oem/grid-control/downloads/solsoft-094433.html

    I can't download it either, and nor can any of my colleagues, using any browser. I am in UK, I suspect there's an issue with the Oracle mirrors, and that if you are downloading from US it probably works fine. Can someone from Oracle investigate this please?
    We consistently get the same result: the downloaded file is: 2,732,571,489 bytes, rather than 3,430,333,041 bytes. It will not unzip as it is not a valid archive, error message:
    bash-3.2# unzip em12_solaris_sparc64_disk2of2.zip
    Archive: em12_solaris_sparc64_disk2of2.zip
    End-of-central-directory signature not found. Either this file is not
    a zipfile, or it constitutes one disk of a multi-part archive. In the
    latter case the central directory and zipfile comment will be found on
    the last disk(s) of this archive.
    unzip: cannot find zipfile directory in one of em12_solaris_sparc64_disk2of2.zip or
    em12_solaris_sparc64_disk2of2.zip.zip, and cannot find em12_solaris_sparc64_disk2of2.zip.ZIP, period.
    However, this error message is caused by an invalid / incomplete zip file.
    I have also tried Oracle Edelivery site with same result.
    TIA!

  • Smpatch and Recommended Patches for Solaris 10

    Hi,
    Is there any way to make smpatch only retrieve recommended patches for Solaris 10 ?
    I've seen several forum posts saying to use
    smpatch set patchpro.patchset=recommended
    but other posters indicate that this only works for Solaris 9 (additionally, it doesn't seem to work at all currently:
    Failure: Cannot connect to retrieve recommended.zip: Not Found )
    As far as I'm aware, Sun's patching policy is to apply the Recommended patches, as well as any that address specific issues you are having. This seems to contrast with the behaviour of smpatch which grabs all patches..

    Hi.
    Depending on your hardware, you can use the following in place of 'current' in patchpro.patchset to get recommended patches:
    sunu45 = Sun Ultra45/Ultra25 Recommended
    sftxk = Sun Fire T1000/T2000 Recommended
    sfv2x5 = Sun Fire V215/245 Recommended
    sfv445 = Sun Fire V445 Recommended
    Mod.

  • How can I install Oracle Database 10g for Solaries (SPARC) from the console

    Dear Forum Members,
    In my office, I have to installed Oracle Database 10g for Solaries (SPARC). But I have to do it without DISPLAY Monitor.Is it possible install it by remote login to this server using response file (silent mode) or something like that?
    If yes. Then How?
    If anyone have the exact solution, then I need your feedback. I shall wait for your reply.
    Thanks
    Aungshuman Paul

    There are 2 possible ways to accomplish this.
    First,
    Silent installation
    http://www.informit.com/articles/article.asp?p=174771&rl=1
    Second, (cut/paste from other site)
    How to install Oracle software remotely?
    Remote Software Installation Steps: (For Solaris only)
    If you want to install Oracle Software remotely, you should perform the following steps. These steps are applicable only if your source and target machine are running Unix.
    For example, you can install Oracle Software from your home from Washington, DC to a target source in California.
    1. Pick your source server or machine for remote installation.
    2. Check that your CD is in your source CD-ROM drive.
    3. On the target machine, find your target machine name with the output of the /usr/bin/hostname
    4. On the source machine, login as a user.
    5. On the source machine, enable client access: % /usr/openwin/bin/xhost + target-machine-name
    6. Become root user by typing: su (don’t use -)
    7. Check that Volume Manger is running. # ps –ef |grep vold (if you see an entry that contains /usr/sbin/vold, Volume Manager is running. Then skip to Step 10.
    8. If not then do the following: # mkdir –p /cdrom/your-cd-file-name
    9. # mount –F hsfs –r cdrom-device /cdrom/your-cd-file-name
    10. Add the following line to your /etc/dfs/dfstab file: # share –F nfs –o ro /cdrom/your-cd-file-name
    11. Verify whether your source machine is an NFS server: # ps –ef | grep nfsd
    12. If you see an entry that contains /use/lib/nfs/nfsd –a 16, then nfsd is running and skip to Step 16.
    13. If nfsd is running, then type: # /usr/sbin/shareall
    14. If nfsd is not running, then start nfsd by typing: # /etc/init.d/nfs.server start
    15. Verify whether your source machine is an NFS server again by typing: # ps –ef | grep nfsd
    16. Make sure your source machine is exporting your product directory by typing: # /usr/sbin/dfshares
    17. Now, log in to the target machine by type: # rlogin target-machine-name –l user (not root)
    18. Then log in as the root user by typing: # su
    19. Go to the source machine by typing: # cd /net/source-machine/cdrom/your-cd-file-name ,then Skip to 24.
    20. If you cannot change to that directory in Step 19 and you do not have an auto-mounter on your network, then create amount point by typing the following commands.
    21. # mkdir /remote_products
    22. # /usr/sbin/mount –F nfs –r source-machine:/cdrom/your-cd-file-name /remote_products
    23. # cd /remote_products
    24. Redirect the target machine display to source machine by typing: # DISPLAY=source-machine:0; export DISPLAY (if you use a Bourne or Korn shell).
    25. Start the Web Start Installer by typing: # ./installer (or whatever the installer name program is).

  • When will 11.1.0.7 will be available for Solaris (SPARC) (32-bit)?

    Hi
    Does any of you know when 11.1.0.7 for "Solaris Operating System (SPARC) (32-bit)" will be available for download on http://www.oracle.com/technology/software/tech/oci/instantclient/index.html ?
    The reason for my question is that 11.1.0.6 contains a bug (at least on Solaris) causing it to reserve approx 180M swap for each client started!
    Regards
    Mads

    Just became available on http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/solsoft.html

  • Latest patches  for solaris 10 - sparc & x86

    Hi,
    Pls any to help me.
    How can i know the latest patches is released by sun microsystem (solaris 10 - sparc & x86) ?
    Thanks in Advance

    Start here:
    http://sunsolve.sun.com/show.do?target=patches/patch-access
    and here:
    http://sunsolve.sun.com/show.do?target=patchpage
    You may need to sign up for a free SunSolve account.
    You can download README files that show all the latest patches for latest versions, view individual patch information, etc. You need a subscription to download the full patch clusters, but you can download individual patches for free if they are security/bug fixes.

  • Bundle Patch1 is now available for Solaris (SPARC), Solaris (x86-64), AIX

    [OTN |http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html?origref=http://www.oracle.com/technetwork/oem/grid-control/index.html] Hi All,
    EM Binaries updated with bundle patch1 are now available on OTN
    OMS and Management Agents for platform ::: Solaris (SPARC), Solaris (x86-64), and IBM AIX (64-bit)
    Management Agents for platform::: HP-UX, or HP-UX Itanium
    The BP1 workbook is updated with various use-cases specific to these platform. We strongly recommend you to follow the instruction from the workbook to apply BP1 patches. If you have any doubts feel free to drop me an email.
    http://docs.oracle.com/cd/E24628_01/doc.121/e35229/toc.htm
    Regards
    Akanksha

    Oracle Instant Client was a "feature" introduced with Oracle 10g. There is no 9i version.
    Code that links with Oracle 9i libraries should be able to be linked with Instant Client 10gR2.
    The resulting application will be able to connect to databases from Oracle 8.1 onwards.

  • Where do I download Oracle ESB 10.1.3.4 for solaris sparc?

    Hi,
    Where can I download Oracle SOA Suite ESB 10.1.3.4(only ESB, BPEL is not required).
    I could find the following link:
    http://www.oracle.com/technology/software/products/ias/htdocs/101310.html
    which has Oracle Enterprise Bus 10g (10.1.3.1.0). What is the patch number for upgrading this to 10.1.3.4?
    I believe we get latest Oracle Apps and database adapters out of box with ESB 10.1.3.4. If not please suggest me where I can get these.
    Also I need an SAP adapter which is not given by default with ESB 10.1.3.4. Please suggest me where I can download this from and how I install it.
    Please give me the links for downloading
    Oracle SOA ESB
    version - 10.1.3.4
    Operating system: Solaris Sparc
    Adapters: SAP, Oracle Apps and database.
    Thanks.

    Thanks Marc.
    I was not able to find the patch on metalink. Could you please give me the patch number specific to only ESB 10.1.3.4 if you have.
    I have the 10.1.3.4 patch number(7272722) for the complete SOA suite.
    Also please comment on adapters part.
    Thnaks.

Maybe you are looking for

  • Using an existing iTunes library on a removable disk

    My laptop died recently and I'm still waiting for it to be repaired. While I'm waiting I've removed the hard disk and put it in an external USB-IDE case so I can access my files. My question is: can I use the iTunes library on my laptop hard disk wit

  • Specific E-mail with links causing freeze using Mail

    My wife is getting newsletter style e-mail from Better Homes and Gardens that contain links to pictures and other websites.  These pictures only appear  if internet access is connected so I believe that they are links that only are active once the ma

  • DVD Playback on Computer and Standalone-Player

    Hi, Since a lot of people here author DVDs professionally I wonder how you handle the quality-subject with your customers. Generally I wonder about the differences between standalone players on one hand hand on Computers or Laptops. Different monitor

  • Problems trying to correlate BAM over multiple Send Ports

    I am having an issue with BAM in BizTalk 2010.  I have a Messaging only solution using 3 Receive Ports and 3 Send Ports.  The Processing received an XML file which contains Inventory updates for product items.  The flow is as follows: 1) Receive a fi

  • How to create a Sales Area  in SAP

    Please tell me in step by step how o createa sales area !