Answering a second call

On a few of occasions, I have had a second call coming through, I try to end the first call and answer the second except, that button is cleverly placed directly over the hangup button. The person on the first call has inevitably hung up before I could and now instead of switching calls, I hang up on the second caller.
Any advice about relocating that button?

This is a user to user support forum. There is no way for you to relocate that button, however if you would like to make a suggestion to Apple about this, then you need to go to the feedback page at www.apple.com/feedback and then click on the appropriate link.

Similar Messages

  • Returning to Original Call after answering second call

    While on a phone call, I answer the second call, but when I want to hang up from the second call, and return to the original call, I lose both calls. Can someone help me with this problem please? Thank you.

    Hi and welcome to the BTSC forums.
    Enjoy your stay with us!
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Cannot pick up calls on wait, Cannot make a second call holding the first call

    I have a really weird problem with my iPhone 5S. (iOS 7.1)
    1. When I am on a call, I am not able to pick up a second call that is on wait. I can see the second call, I can hear the beep sounds but as soon as I pick up, the call freezes in 00.00 time, and My first caller is still active, not on hold.
    2. When I am on a call, I am not able to make a second call placing the first call on hold. The second call disconnects immediately with 3 beeps.
    3. I am able to see the incoming calls on wait, when I am already on a call. I am able to hear the beeps coming in. SO it means the call waiting is on (Tried turning it on/off/on too.) But when I pick up the call, the above problem comes in.
    What have I tried to solve this: (None of them helped)
    1. I tried a hard reset of my iPhone (Holding Power and Home button)
    2. I tried toggling the Call waiting button
    3. I tried resetting network settings.
    4. I called my Operator for assistance. I am using Airtel, India. They told me to dial this code - *43# . I tried it and it gave me this screen. But the problem is not solved yet.
    Is there anybody here who is facing the same issue with your iPhone? I never had this problem with my iPhone 4.

    Make sure you do not have "Do Not Disturb" turned on. This feature will block the first call, but is someone calls right back it will be put through.
    On the iPhone, go to Settings/Do Not Disturb
    Make sure you do not have Do Not Disturb turned on manual or scheduled.

  • When I am on a call and another call come in my iPhone does not beep to notify me of the second call how can I fix this?

    Please help... when I am on a call and a second call comes in my iPhone does not beep or make any noise for that matter to notify me of the second call. Why is this happening but most important what can I do to fix this? I have missed several important calls because I have no clue the call is coming in.

    Make sure that call waiting is turned on and check with your carrier to ensure that is activated on your account.

  • Second call of an SQL query throws a syntax error?

    Private Sub RefreshDataSet()
    Dim strSQL As String = DataAdapter1.SelectCommand.CommandText
    Try
    DataSet1.Clear()
    DataAdapter1.SelectCommand.CommandText() = Trim(strSQL & " WHERE BadgeID = " & strEmployeeBadge)
    DataAdapter1.Fill(DataSet1)
    Catch ex As Exception
    MsgBox(ex.Message)
    End Try
    End Sub
    When I call the above procedure, the sub does work correctly and I get the expected results / records in the dataset.  But, when I call the Sub again (to refresh the dataset) it gives me an "incorrect syntax" error.
    I'm not sure why it is doing this.  Any suggestions or ideas?

    Youjun,
    It's very frustrating when you keep asking if the code is the same, or if I have tested the code.  I've said that I debugged.. I've said I have tested the code.  Your continuing to ask me this is pointless, rude, and only serves to make YOU look
    stupid.  I'm sorry if that is rude, but please stop asking me!
    To respond:
    I supposed that the original DataAdapter1.SelectCommand.CommandText is "select * from table1"
    -Yes, the base command is similar to this, except that I call each database field, not using the *.
    1) When you run it the first time, the DataAdapter1.SelectCommand.CommandText will be "select * from table1 WHERE BadgeID ='123'".
    -Yes, I append 'WHERE BadgeID = XXX' to the query, the first and
    each subsequent time.  Again, I said that the code/call/syntax DOES NOT CHANGE.  It is the
    same every time.
    2) Then you changed the strEmployeeBadge, I supposed that is '234'
    -NO!  I do NOT change the code!!  I'm sorry, but what part of 'the query is
    exactly the same' is unclear?
    3) when you run it next time, the DataAdapter1.SelectCommand.CommandText will change to "select * from table1 WHERE BadgeID ='123'
    WHERE BadgeID = '234'"
    -NO!  I have specifically tested for this
    and as stated, the SQL syntax does not change!
    So it 'syntax' fail will pop out when second call.
    -NO, your assumptions are INCORRECT.
    I suggest you recording the commandText when first change the DataAdapter1.
    I write a testing program for you.
    -Your 'testing program' is for all purposes, the same exact code as what I used.  There is no difference.  
    Now, as also stated before, I have several other instances
    where I use the same 'technique' to amend the base SQL queries of the DataAdapter.  Each of these other instances work fine, and I use them to 'refresh' my DataSet information several times throughout the running of my program.  Just for some
    reason, this time, it does not work.  I don't know why and was hoping someone else had found the same/similar issue and also found a resolution.  The DataAdapter is configured the same as the others, the code is the same as well.  I will just
    have to find a work around, or other way to do what I want I guess.
    Lastly, yes, I set strSQL in the subroutine because I want that variable to be gone at the end of the procedure.  It recalls, then sets the syntax, every time the Sub is called on purpose.  I do not want strSQL to be 'global', which by the way,
    according to Microsoft documentation I have read, is no longer possible.  Global variables are 'technically' not used/recognized anymore.  If this has changed, then I stand corrected.
    Thank you for responding, I will just find another solution I guess.

  • SOAP adapter erro 404 after second call using Web Dispatcher

    Hi XI experts.
    In a  XI  SOAP sender  interface that works if I use the central port of XI.
    In the productive use SAP Web Dispatcher.
    If I use the Web dispatched port, after the first run the application generates the error:
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team
    I need some help to make the interface works through the Web Dispatcher.
    The client interface was developed in .NET.
    Best Regards
    Marco Zerbini

    1. Please ensure that all nodes balanced by the web dispatcher are fully working and available.
    2. Please check the URL being called by the external service. Check if on the second call it is still using the WD's URL instead of the instance's. This might occur depending on the external service behavior when receiving a 302 MOVED http code.

  • HT1689 I have trouble when I am talking to someone and I have a another call coming in - I can answer the other call but in the process I loose the connection to the previous caller that I was talking to

    I have trouble when I am talking to someone and I have a nother call coming in - I can answer the call but when I want to go back to the original caller I get disconneted

    From the iPhone User Manual:
    Respond to a second incoming call:
    Ignore the call and send it to voicemail: Tap Ignore.
    Put the first call on hold and answer the new one: Tap Hold Call + Answer.
    End the first call and answer the new one: When using a GSM network, tap End Call + Answer. With a CDMA network, tap End Call and when the second call rings back, tap Answer, or drag the slider if the phone is locked. If you’re on a FaceTime video call, you can either end the video call and answer the incoming call, or decline the incoming call.
    Switch between calls: Tap Swap. The active call is put on hold. With CDMA, you can’t switch between calls if the second call was outgoing, but you can merge the calls. If you end the second call or the merged call, both calls are terminated.
    Merge calls: Tap Merge Calls. With CDMA, you can’t merge calls if the second call was incoming.

  • HT4211 My audio apps keep playing in the background after I answer a phone call. How do I turn this off?

    My audio apps keep playing in the background after I answer a phone call. How do I turn this off?

    Hello BobWeaver,
    It sounds like we need to troubleshoot the software on your device as that is not expected behavior.
    I would perform steps 1, 3 and 5 from the iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/. If you get to step 3, then I suggest closing all the apps. Here is step 1 to get you started:
    Restart iPhone
    To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
    Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
    Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
    If your device does not turn on or displays a red battery icon, try recharging next.
    Cheers,
    Sterling

  • Is posible fwd a second call on demand?

    hi all,
    is posible do that? i mean if some user have on active call and recieve a second call, is posible fwd to whatever DN i want? i dont talk about Call Forward and Call Pickup Settings i mean directly on my phone options

    No. You can use iDivert but that will send to the CFB destination already defined on the DN. You could activate CallFwdAll (in this case from /ccmuser since you're already on a call) - or even modify the CFB destination if you enable it within Enterprise Parameters - but this would require you to plan ahead of the next call you plan to forward. You can't do blind transfer on an alerting call to a destination of your choosing.

  • CCA 8 - Disable second call on line 1

    Where in CCA version 8  can we disable the second call on any extension? Is it possible?

    Hi William,
    Have a look at these 3 good threads that detail this issue.
    https://supportforums.cisco.com/message/3246737#3246737
    https://supportforums.cisco.com/message/3088569#3088569
    https://supportforums.cisco.com/message/3125246#3125246
    It looks like you need to use the cli with Huntstop Channel if you
    are using Dual Line DN's and the CCA (Busy Trigger = 1) if using
    Octo Line DN's
    Cheers!
    Rob

  • Nokia E65 and SIP - cannot make second call for 30...

    hi.
    anyone ever hear of this. I have the Nokia E65 and I am using SIP.. I make a call and everything is fine.
    I make a second call within 30 seconds, phone stays on calling.. the other person has answered the phone since they are in the office.... If I wait 30 seconds, the second call goes through.
    Any suggestions?
    THank you!

    Let us in on your dirty little secret.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • PropertyNode: Interface Information: Interface Description fails on second call

    Hello all,
    I´m new here and I have a problem.
    As the subject already tells the property node: Interface Information: Interface Description fails on second call.
    I have written a SubVI to get the virtual COM Port of a specified Device, which is connected via USB to my computer.
    Therefore I use the "VISA Find Resource" VI to get a list of all active COM Ports and then use the mentioned property Node to get the device information.
    I search for a specific string in this device information and if this string is found, I have my needed COM Port.
    This is all working. Except for the case I start this SubVI a second time. 
    I always get an error from this property node saying: Error: -1073807246 in Property Node, VISA: (Hex 0xBFFF0072) The resource is valid, but VISA can not currently access it.
    I don`t understand why I´m getting this error. I don`t even open the VISA Resource. I just check the name of it and make a VISA Close.
    Maybe the problem is in my device?! I don`t know.
    If I switch my device off and on again. My VI is again working once.
    I hope someone has an idea, where this problem comes from and how to fix it.
    I have the part of my SubVI, which is relevant to see the issue.
    Thanks in advice
    Best regards 
    TDO
    Attachments:
    FindCOMPort .vi ‏20 KB

    Hi TDO,
    please indicate cross posts! (Even when this was 'just' the German forum…)
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • No connection for second call by Helmet Bluetooth

    As the subject I have two Nokia C5-00 and both have the same problem, I make the connection with my helmet bluetooth and everything it's OK, but when I receive a second call the cellular disconnect bluetooth. If I use an old Nokia 3124 or 6730c everythin run well. Please may you tell me where I make the mistake?

    Hi Russobiagio,
    Welcome to our Nokia forum!
    By the sounds of it, it seems the phone is not compatible with the Helmet Bluetooth. When a device is not compatible with another Bluetooth device it normally doesn't connect or if it does, only temporarily. Check the Bluetooth details of your Helmet, the C5-00 has Bluetooth version 2.0 and supports the following Bluetooth profiles: 
    SAP (SIM Access Profile)
    RSAP (Remore SIM Access Profile)
    PBAP (Phone Book Access Profile)
    A2DP or AADP (Advanced Audio Distribution Profile) 
    AVRCP (Audio/Video Remote Control Profile)
    When all of the details above are compatible with the Helmet, try to make a Bluetooth connection with another device to see if the Bluetooth on your C5 works correctly. If it does and it can't connect with the Helmet, try a firmware update for the phone and/or the Helmet (if available). Also erase all Bluetooth connections from both devices and reconnect. You can remove a bluetooth connection off of the C5 by navigating to Menu > Settings > Connectivity > Bluetooth > Navigate to the right to access your list of paired devices > Select the device > Options > Delete.
    If you've tried all of the above and are still unable to make a stable connection, your phone will most likely not be compatible with the Helmet.
    Hope this helps!
    Iris9290
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

  • IPhone 5s continue ringing after answering the voice call

    Hi,
    After I installed the update iOS 8.0.2 my iPhone 5s continues ringing 0.5-1 sec more after I answered the voice call.
    What can I do to fix it? It is pretty uncomfortable, because I use to swipe and answer, but now phone continues ringing in my ear for a some time.
    Thanks in advance!

    This has just started happening to me as well! After two months of relatively non-faulty use, now this affect. Really rattles me, too.
    Yesterday I got a warning triangle out of the blue that said the phone was shutting down due to overheating, but it was stone cold! I reset then and it has not re-appeared. Never saw that with two years of use on my iPhone 3G. Now this affect, they must be related, but does this mean that there is a software issue or a hardware issue?
    I still have proximity sensor issues after the iOS 4.1 upgrade

  • Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

    Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

    Hi there
    I'll pass your details to our Russian team and they'll contact you to assist further.
    Kind regards
    Bev

Maybe you are looking for

  • Posting Period coming into the rows at the query runtime & couldn't drop it

    Hi All, We have a query on an InfoCube that we have copied to the Multiprovider containing two cubes, exact copies of the original cubes. Two cubes are one for the previous years and one for the current year. Now, the query is copied from original cu

  • X60T Driver issues/missing

    Hi, I thought I'd better join up as I've scanned through many similar issues on the site & none seem the same as my or have any useful tips. A couple of weeks ago my HDD destroyed itself so I had to install WinXP from scratch I also have SP2 & 3 inst

  • Printing through DBMS_JOB

    Hi All, I've created a report from report bulider. Now, I want to create a procedure that will run the report for printing every end of the month. This procedure will be submitted to DBMS_JOB. How can I do this? or are there any other solution to acc

  • 1.1.2 Removed Contact Names From Dialing

    First off this is my first post in here at Apple so I've got to make it know that I love the products I own (iPhone and 4th Generation iPod). iPhone has made life easier for me since I'm on the go and needed a really good smart phone. On to my questi

  • QT Pro Key Is Ignored

    I have QT 7.1 installed on my PC. I just purchased the upgrade to Pro and followed the instructions for entering the key. After entering my registered name and registration code text is displayed below the key that says 'QuickTime 7 Pro' so I assume