Any arch user here who uses e17+composite?

hello!
i want shadows! real shadows!
but i have a big problem - i have little black edges on the top corners of my windows.
here is a little example picture:
www.iggy-online.de/files/black-edge.jpg
i use the following settings:
.xinitrc
xcompmgr -c -r7 -t-7 -l-7 &
dbus-launch --exit-with-session /opt/e17/bin/enlightenment_start
xorg.conf:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "touchpad" "CorePointer"
InputDevice "usbmouse" "SendCoreEvents"
Option "AIGLX" "off"
Option "Xinerama" "1"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
FontPath "/usr/share/fonts/misc/
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/Speedo/"
FontPath "/usr/share/fonts/TrueType/"
FontPath "/usr/share/fonts/freefont/"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "extmod"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Identifier "touchpad"
Driver "synaptics"
Option "Protocol" "auto-dev"
Option "Device" "/dev/input/mice"
Option "SHMConfig" "on"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Identifier "usbmouse"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
Option "Resolution" "800"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "AUO"
HorizSync 30.0 - 75.0
VertRefresh 60.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Maxdata (RogenTech) B101925"
HorizSync 31.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
BoardName "GeForce Go 7300"
BusID "PCI:1:0:0"
Screen 0
# Option "NVAgp" "3"
# Option "TripleBuffer" "True"
# Option "Coolbits" "1"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
Option "RenderAccel" "True"
# Option "AllowGLXWithComposite" "True"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
BoardName "GeForce Go 7300"
BusID "PCI:1:0:0"
Screen 1
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "DFP: 1280x800 +0+0; DFP: 1024x768 +0+0; DFP: 800x600 +0+0; DFP: 640x480 +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "metamodes" "CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "True"
# Option "RENDER" "True"
EndSection
i'm using:
nvidia-suspend2 (9755)
newest xorg-server (1.3.0.0)
newest e17 packages (takhis repo)
plz, can someone help me, i think and hope that i can solve the problem while changing the xorg.conf.
thx, mfg iggy
Last edited by iggy (2007-06-06 12:40:15)

igglybuff wrote:
Ankka wrote:You could use the bling module included with e17..
Maybe he wants _real shadows_, when there is shadows over windows, not only on the "wallpaper"
Damn hard to explain
bling module is composite, so the shadows are everywhere. It isn't enabled by default.
But if it has the same problem as xcompmgr... I have no idea what could cause it. You could try moving the configs for e somewhere... and see if it works with a clean system.

Similar Messages

Search Trace user IDs who used trx Z* or standard ones

Hi SAP Experts,
I need to find recent users who accessed specific transacations such as reports, Z trx.
For posted documents I managed to find via BKPF.
ST03 does not allow a range of data.
Does anybody know a way of finding who used the transactions recently?
Any help is welcome
Regards
Roger

ST03n and search by BASIS can bring all you need including range of dates. Problem solved

** New Install MBP from Tiger 10.4.10...Best Way? Any LOGIC users here?

Okay, before you say it, yes, am asking about LOGIC users here to see if they noticed an increase in FPU or DECREASE with new UPDATE, with first LEOPARD, there were spikes, and it used more CPU than TIGER (some are still waiting for Pro Tools)..
Anyway, what is the best way to update to Leopard and still keep my emails (10 different accounts) and just update to LEOPARD ? MBP is my lifeline and I don't want to back up, just install my NFS then go to update, will that work!
Thanks in advance!

Catherina wrote:
... What is the best way to do this?
The best way, really the only way, is to purchase Snow Leopard.
Online (UK): http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
Elsewhere: call the phone number in the Apple Online Store.
Apple's price is $19.99, £14.00, €18.
Snow Leopard is not available to download from any legitimate source.
Once you install Snow Leopard, upgrade iTunes to version 10.7 or the latest, iTunes 11.
iTunes 10.6.3 is the last version of iTunes to support Mac computers with Mac OS X 10.5.8 with either Intel or PowerPC processors, but since you have an Intel iMac, the best solution is to purchase Snow Leopard. Leopard is no longer available from Apple and prices from aftermarket vendors can be unreasonably high.

Anyone Here Who Uses Yahoo Email Having Trouble? Re Attaching Files?

Hi, I'm running on OS 9.2 and haven't had time to upgrade yet. And ever since Yahoo upgraded Classic email I've been having trouble and wondering if anyone else who has a Mac and uses Yahoo has had the same? I wrote to their Help section and they wanted me to send a screen shot of the problem. Well, I managed to do that but I can't attach! I don't send attachments that often so I can't remember if there ever was a box saying Browse. I thought there was one just saying Open and I'd click that and the file would go into this slot, then I'd click attach and the thing was done. Was there ever a Browse tab to click on?
But with this upgrade, when the box from my Desktop appears with the files, I select one, then click Open and it does go to the slot on the Yahoo page. But then when I click attach, another page appears with four boxes that turn blue one at a time as the file rotates, I guess. Then it'll stop at the second or third box. After that it goes back to the page with the file slots and there's a yellow box with red writing that says file not specified so I can't send it. Never had this problem before.
The first problem I was trying to highlight is that now every time you write an email, at one point it automatically saves as a Draft after a few sentences. A notice in bold appears at the upper right hand corner saying Draft Last Saved At: and gives the time. At the same time this happens, three rectangular boxes appear on the bottom left hand side of the email I'm replying to or composing, with numbers in them. In the first one, the first numbers are always 1212 like it's trying to dial NYC. The middle box says 240 and in the last box are a combo of letters and numbers. If I delete them, they reappear after a few seconds and it seems like every time they appear, another Draft is saved, from the number of them in the draft box.
I've also been having trouble with returns making new paragraphs. And last night I couldn't write an email at all! I was trying to reply to one and this time all the cursor did was highlight in black the message from someone I was trying to delete because they don't like to see their original message in my reply. After that, the cursor wouldn't move at all; I couldn't delete and I couldn't write the message. That's why I'm writing now from my office Mac. On the Yahoo mail blog the writer says he knows people are having difficulties with paragraphs and they're trying to solve them. He asked that people write with any other problems so I did write this morning and hopefully I'll get some kind of reply. But in the meantime I thought I'd write here just in case anyone else has had trouble with their Yahoo emailing. After I replied to Yahoo Help and told them I was unable to send them a screen shot, the only reply I got back was: we know you're having a problem but without a screen shot we're unable to help. Well, duh! That's what I can't do! lol So I gave up on them. Thanks for letting me vent.

Hi, and thanks. And I am using iCab, but it's the free version so maybe that's the problem. How'd you get it to identify itself as Firefox? Never mind, I probably wouldn't understand anyway. lol Looks like my Browse tab got lost somewhere, then. It seems I have no choice but to find time to upgrade since I don't have any problems when I use the office iMac, which has Tiger. On my Mac, I also have the old IE browser and I was able to use that to get Classic email before they messed with it. But the other day when I tried to get through to Yahoo using that, now there's just a bare-bones version of the email system, with everything on this vertical list, so maybe that's about to go, too. Maybe Microsoft needs to try again to grab Yahoo and fix things up!

Any Nikon users here?

I just moved from a Macbook to MacbookPro, I use camera control pro to run my Nikon D200 when taking photos and it ran fine on the macbook but is slow as can be on the mbp. I bumped the memory to 4gb and no change. By slow, I mean very slow. Scrolling or resizing an image to at least 15 to 20 seconds. on the macbook virtually no delay. Any thoughts on what might be causing some interference?

Did you migrate it from the old machine or install it new on the mbp?
Start with the troubleshooting basics:
1. Repair Permissions using Disk Utility
2. Delete the plist file from the HD/Users/ Your Name / library / preferences folder. You'll need to reset your User options afterwards.
3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

Any DropBox users here? folder management question:

Just started using DB solely to back up my documents.
My question is, how do you maintain DB on your desktop?
More specifically (for example) if you were solely backing up docs, would you just keep your entire docs folder in the dropbox folder (with no local folder on your desktop) or, would you have your normal "my documents" folder and a copy of it in DB?
The latter option takes more time as youd have to save all of your files twice (once to the "my docs" folder in DB and the other to the "my docs" folder in your local user folder).
I guess I could just save to my local user folder and occasionally sync my DB folder with my local folder using something like SynToy?
What do you do?

You sign up for service, install client utility on computer ‘A’ ., Client utility creates ‘My DropBox’ folder under ‘My Documents’ ., Client copies/synchronizes contents of My DropBox to your DropBox account., You install client utility on computer ‘B’ Client brings all files down from your DropBox online account to your ‘My DropBox’ folder on this computer (B) .,You change a file on Computer B, files get uploaded and then synchronized to Computer A as soon as the client utility connects from that computer. The files and folders inside your DropBox directory get a handy little sync indicator showing if the file has been uploaded or if it is pending upload to the online service.
So I think the easy way is to let your document programs on your computer save there files directly to the Dropbox folder.

Any Fairpoint users here?

I have a client on FP. Is it pretty easy to set up an email account to auto-forward mail to another, non-FP address? Haven't found answer by searching. Thanks.

Did you migrate it from the old machine or install it new on the mbp?
Start with the troubleshooting basics:
1. Repair Permissions using Disk Utility
2. Delete the plist file from the HD/Users/ Your Name / library / preferences folder. You'll need to reset your User options afterwards.
3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

Any FRENCH PEOPLE here who can help with: E71 + Fr...

Can anyone advise me how to set up my phone
so i can use it to phone via the freebox?
The free.fr website does not provide much info,
or maybe it's just that my French is not good enough.
Appreciate the help...
A dutch in France.

Thanks for yr reply.
I should have posted this i guess,
but meantime i found some instructions:
it's for the E61, but works the same for the e71:
http://www.universnokia.com/?p=3
cheers
egon

Any TEXTMATE users here?

Hi
I use Textmate 1.5.6 on the Mac for my coding and building.
The only thing I have problems with is not being able to view
Trace statements. I know there's a way to do it, but as yet I can't
get it working.
If anyone out there has got this working, I'd appreciate the
help with this.

I'm on Textmate as well but just use the Terminal... start
your application from the command line and you'll see the
output.

Any mikrotik users here haplite?!!!!!

mts
This topic first appeared in the Spiceworks Community

I do run a MAMP, but I haven't set up vhosts on it so I can't help you there. You might have more luck asking in the Mac OS X Server forum - even though it's not OS X Server, people there might have experience with more detailed Apache configuration.

Looking for some guys who use macs and iChat

I got a mac a few years ago and don't have any buddies of mine who use macs, I was wondering if you'd like to talk about macs n stuff, IM me, my aim screen name is "FightClubMaryr"

Hi RandomSkater,
Check this page out about halfway down for Chatter lists.
http://www.ralphjohnsuk.dsl.pipex.com/page5.html
Ralph

I am trying to help a friend who`s imac is giving her trouble. when the user logon is typed the machine begins to load, then in about a minute, kicks back out into the logon screen. ANY insight to her problem will be greatly appreicated?

I am trying to help a friend who`s imac is giving her trouble. when the user logon is typed the machine begins to load, then in about a minute, kicks back out into the logon screen. ANY insight to her problem will be greatly appreicated?

Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
http://support.apple.com/kb/ts1417

My daughter who used to have an apple account and cancelled it is still having money taken out of her account.?

MY daughter who used to have an apple iTunes account and cancelled it is still getting money taken out of her account what do I do guys to sort this out and get her a refund.

If she logs into her account (an account can't be cancelled or deleted, you can only stop using it) on her computer's iTunes via the Store > View Account menu option, there should be a Purchase History section with a 'see all' link to the right of it - clicking on that should then display a list of her purchases. If she no longer has iTunes installed then she might be able to see recent purchases via this page : http://reportaproblem.apple.com
Did she have any auto-renewing subscriptions that she didn't stop ? There are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098
Depending upon what the charged are, she can try contacting iTunes Support and see if they will refund or credit her : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

[HELP] How to records user who use SQLPlus or SQL editor?

Dear Gurus,
Is onyone know how to record user who use SQLplus or any SQL editor?
for instance...
user1 using SQLplus on monday august 9.30.21 PM...and I have table which record this for audit user.
Or..
Can I block user who connect to oracle using SQLPlus?
If anyone know how to do this..please inform me...
Thanks and Regards
Erie

You can enable Auditing (AUDIT_TRAIL) and audit at the Session Level to record Logon and Log off of a required user. This can be enabled to be recorded in the audit table or operation system file. You can also audit user statements etc.
For example, to enable auditing connect for user UGONIC
SQL>audit connect by UGONIC;
TO disable it
SQL>noaudit connect by UGONIC;
Check in the SQL Reference for the AUDIT statement and requirements.
If you do not want the user to connect at all via SQL*Plus, you can use PRODUCT_USER_PROFILE to disable a users access to SQL*Plus or at the lower level, disable specified SQL*Plus and SQL commands for the user. You need to run the PUPBLD.SQL script as system user (if not run yet) and add records to it as required.
Example: After running PUPBLD.SQL. This entry stops the user UGONIC from using the drop command at the backend in SQL*Plus.
INSERT into product_user_profile (product,userid,attribute,char_value,date_value)
values('SQL*Plus','UGONIC','DROP','DISABLED',NULL);
Note that if a user is already connected by the profile entry, it is not activated on that session, but on subsequent logons. Again read the requied security documentations for this.
For both auditing, you need to set the required database intialisation parameters and know where to get the audit records (in tables, views or OS file). For instance, when using tables, you maintain and query tables like audit$ to view the logs. When using OS type logging, it is recorded on the path specified in the AUDIT_FILE_DEST init parameter (In Windows, it is logged in the Windows Event and you can view it from the event viewer).

How to edit contacts in Unified Contact Store in outlook or owa for users who use Attendand Console?

Hi all,
We have Lync server 2013 with Exchange server 2013 and "Unified Contact Store" configured and working. unfortunately our reception staff who use the Attendant Console are unable to edit their contact list (this is normal as 2010 clients do not
support UCS).
According to Microsoft notes that I have read we should be able to edit the UCS contact lists in OWA, Outlook, or Lync 2013. I can get reception staff who normally use Attendant Console (AC) log in to Lync 2013, arrange their contacts then go back to AC
- this works fine.
However as reception staff already have outlook, I would like to enable these users to be able to edit their contact lists in outlook or OWA. Does anyone know how to do this? I can't find any contact list in outlook that relates to the contact lists
in Lync.
Simon.

Hi,
For deploying Unified Contact Store, the users must log in with Lync 2013 at least once.
More details:
http://technet.microsoft.com/en-us/library/jj204963.aspx
Kent Huang
TechNet Community Support

Any arch user here who uses e17+composite?

Similar Messages

Maybe you are looking for