Any fix for not playing swf files?

Hello
Having trouble getting FF to play my Flash 8 swf files on
this page
http://www.enhancedwireless.net/indexrdm.html
There should be a small logo animated for about 3 sec in the
upper left of this page, but instead I get nothing on my MAC OS
10.3.9. and any of my friends using PC and MAC get nothing as well.
Safari plays this fine...Also there are 7 or 8 banners on
this page 4 of which are swf files, and these are scripted to play
randomly on every refresh of this page, however they do not appear
at all on FF/netscape on mac or PC...some machines get nothing,
some get a big Quicktime logo in the middle of where the swf banner
should play. All my swf files need Flash player 8 or higher to
work. IE 6 has problems but IE 7 seems to play these OK.
So, how to fix this?
Thanks
KB

You may have already tried this yet have you tried exporting
your file using a lower flash player? No guarantees but its always
worth a try

Similar Messages

  • Any fixes for timemachine corrupting photoshop files?

    I've seen older discussions about this issue... I'm using CS4 with OX10.5... my time machine back up is a 1TB Phantom Green drive... its only using 150 gb os space! so I don't think the size is the issue. Time machine gets stuck...then in order to get out of it you have to restart... any photoshop files that were open while time machine was trying to run gets corrupted....
    ok I've been negligent in trying to get this resolved.. its been happening for about 4 months now... I cannot think of anything that I added to make this happen....
    has anyone figured this out yet?

    Hi, for my money TM is the only backup solution worse than no bacjup at all, but that being said...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Repair both the Source & Backup Destination, if TM still fails then some file is bad & needs replacing or deletion.

  • Can not play SWF File.

    I keep getting this message, content on this page requires a newer version of Adobe Flash. I have uninstalled and reinstalled Adobe Flash a number of times. Can anyone help me?

    Hello,
    in addition to Ben's hint, please have a look at Nancy O.'s answer concerning the use of "swf": Re: swf looping. ("Flash is a dead web technology ...)
    ... and all in all, best would be that you send us the link to your website, so that we can better analyze.
    Hans-Günter

  • API / Sdk to play swf files inside a Mac / Windows application

    Hi
    We have set of .swf movie files in our application.
    These .swf movie files has to be played inside the content
    area of
    the window.
    We want to know how to play .swf movie files through program
    inside
    our application.
    Is there any api / SDK to play .swf files in Mac and Windows
    Thanks
    Ram

    Hi
    we want to give some clarifications
    As per our requirement we need to play same swf file ( about
    5 in number) always.
    These swf files are kept in some folder and during run time
    we need to play these swf files inside our Mac / windows
    application using flash player.
    we don't need to play any swf file, but the same swf files
    we need a api / sdk to implement this
    Any help will be very well appreciated
    Sudesh

  • When I press any of my music lists to "Shuffle" it will not shuffle but just repeat the 1st song played. Any fix for that? Thanks. HMK

    When I press any of my music lists to "Shuffle" it will not shufle but keeps repeating the same song first played. Any fix for this? Thanks, HMK

    When you get to "Now Playing", tap once on the artwork in order to see the timeline of the playing song.  Look on the left side, the repeat one button is probably active.
    Tapping once this icon bring the repeat option, tapping again will bring the repeat one option.  There you can also tap the shuffle button on the right.

  • The sound cuts out while a track is playing in iTunes.  Are their any fixes for this?

    The sound randomly cuts out while a track is playing in iTunes.  The track has to be stopped and restarted before sound returns.  Are their any fixes for this?

    Hello there, smalltowngirl93.
    The following Knowledge Base article offers up some great in-depth steps for troubleshooting audio not playing in iTunes or Quicktime:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/ts1362
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

    My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

    Hmm . . . comes with a Utility MPEG2 Component ML app with no explanation of what it's for?
    The utility app is an "assistant PKG installer." It allows Lion and Mountain Lion users to install the older QT MPEG-2 Playback Component installer PKG file which is not allowed to run on its own under Lion or Mountain Lion since these operating systems already have a QT X only MPEG-2 component embedded in the QT embedded structure. Without this utility you would have to either copy the component from an older system to your Lion or Mountain Lion system, use Pacifist for installation, or manually open the PKG contents and transfer the component to the appropriate component folder.
    As to your "discussion" regarding the playback of AVI file types, there are really only two strategies here:
    1) You can add component support so that QT can play the files natively or
    2) You can convert the file contents to compression formats that are natively compatible with the unmodified QT component configuration.
    Each user should decide for his or her own self which approach best suits their needs for a particular source file. In most cases, conforming the system's codec component configuration to play the source file directly results in higher video quality since no transcoding takes place but this strategy will not work if a codec which is required is not available for the user's operating system. On the other hand, converter utilities tend to support more built-in codecs and are easier to use since the user does not have to concern him or herself with the nature of the particular source compression formats but at the risk of some potential loss in visual quality. As to what converter to use, once again this is a matter of personal choice. In the case of commercial converters like iSkysoft, the codecs are built in while MPEG Streamclip accesses the host operating system's QT codec component configuration. I personally prefer the free HandBrake app for AVI, MKV, TS, MTS, and M2TS conversions since it has an exceptionally full-featured X.264 GUI with some user options that 97% of users are likely to never use.

  • HT3775 Hi...I have the OS X v10.6.8 but my QuickTime is not playing .mov files. How can I fix this?

    Hi...I have the OS X v10.6.8 but my QuickTime is not playing .mov files. How can I fix this?

    Hi...I have the OS X v10.6.8 but my QuickTime is not playing .mov files. How can I fix this?
    Depends of the specific kind of file you are trying to play. MOV refers to the file container. Any data compatible with the system used to create the file can be placed in an MOV file. If you don't have the same codecs available on your computer to play back the file or if your version of the QT player does not expect expect the encoded data to be in an MOV file container, then it cannot/will not play the file. Use the Finder Info window, media player Inspector/Information window, or a dedicated utility to determine what compression formats were used to create the MOV file and then install the required codec(s) if available.

  • After moving my music library from my old mb to the new one, my new mb pro does not play the files evenly. It takes a break for two sec's and starts playback where it stopped. Ideas anyone?

    After moving my music library from my old mb to the new one, my new mb pro does not play the files evenly. It takes a break for two sec's and starts playback where it stopped. Ideas anyone?

    I may have found an answer here:
    http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive
    They only thing I can assume is that my external hard drive was slow to start and iTunes defaulted to its old directory (see the last paragraph at the link above). However, once my external was recognized shouldn't everything have fixed itself?
    Message was edited by: williamson42
    Message was edited by: williamson42

  • When I open iTunes, I get a message that "iTunes has stopped working".  I've tried reinstalling itunes, creating a new user file, changing the startup programs, and am having no success in getting iTunes to stay open. Any "fixes" for this problem?

    When I open ITunes, I get a message that "iTunes has stopped working".  I have tried reinstalling iTunes, creating a new user file, changing the startup programs in accordance with articles in iTunes troubleshooting, but am having no success in getting iTunes to stay open.  Any fixes for this problem?

     

  • CS5 can't read Canon G-15 raw files - is there any fix for that?

    CS5 can't read Canon G-15 raw files - is there any fix for that?

    When you save the pictures out of Photoshop, also consider the pixel x pixel size
    Photo Scaling for Video http://forums.adobe.com/thread/450798
    -Too Large May = Crash http://forums.adobe.com/thread/879967
    -And another crash report http://forums.adobe.com/thread/973935

  • Is there a player for pc to play swf files

    Is there a official macromedia player for pc to play swf
    files ?

    The most simple thing to do is just run the .swf through your
    browser IE, Firefox etc.
    but if you have large amounts of files to manage, you may
    like
    Text

  • Since the new IOS7 the ipad has become so slow as to not really be usable.  It has turned the IPAd into a kindle as all I can do is read a book its so SLOOW.  Any fixes for this

    These last upgrades have really made this Ipad an I Brick.   Any fixes for this slow devce that frezzes half the time and sometimes takes seconds to recognize my typing.

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • ITunes Server - iTunes does not play .m4a files

    Hello,
    when enableing iTunes server on NSS326 and connecting to it via latest iTunes, connect goes OK (The name of the server changes, but this is a known bug). The music files are displayed, but .m4a Files are not played back. .wav files are played back. .m4a files are played correct via iTunes when accessed via File System. Is there any fix for this?
    Ognian

    Found it,
    looks like iTunes is very sensitiv to the tags info inside the m4a file. Get mp3tag select all m4a files, and hit Save. That's it. mp3tag saves the tags correct.

  • Problem in playing swf files in IE 6.0

    I am facing a big problem in playing swf files in IE 6.0 with
    the tags object and embed.
    In my current project their is option to upload the swf files
    to oracle db and when ever wants to view that swf file, reading
    that swf from db and displaying in browser, In win 2000 swf file is
    displaying very fine, but not in win 2003 and win xp. and that swf
    file, entire application is using asp.net, C#
    Can anyone tell the problem behind this situation.
    I feel great for any solution.
    Thanks in advance

    > Yes, I put it in the (2) posts above...
    No.. there is no URL in the two posts above .. if there was I
    would not have
    asked for it again
    But now you have, I can have a look (no promises though :))
    BTW: These are your posts in their entirety:
    >>
    Hi,
    I'm brand new to programing, so my knowledge is limited. But
    I'm having a
    similar problem where my swf appears but sits on frame 1. I
    have a
    preloader
    set up on fr2. But it just gets stuck there (fr1). I know the
    plugin is
    installed but not sure why it won't display my movie. I know
    it's
    happeneing
    only with IE and XP and XPpro. Any ideas?
    >>
    >>
    Sorry, I since realized that it's not getting stuck on fr1.
    It's just
    displaying the bg color in the html page while it's waiting
    for the swf to
    load. But the swf never loads. It just sits there. I've tried
    using
    different embed tags, etc. But no-go.
    Here's the first example-
    <body>
    <table width="100%" height="100%" border="0"
    cellpadding="0"
    cellspacing="0">
    <tr>
    <td><div align="center">
    <object
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
    codebase="
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
    rsion=6,0,29,0" width="800" height="600">
    <param name="movie" value="NINA.swf">
    <param name="quality" value="high">
    <embed src="NINA.swf" quality="high"
    pluginspage="
    http://www.macromedia.com/go/getflashplayer"
    type="application/x-shockwave-flash" width="800"
    height="600"></embed>
    </object>
    </div></td>
    </tr>
    </table>
    </body>
    >>
    >>
    Here's another example which is part of the most current
    detection scripts
    from
    Adobe....
    <script language="JavaScript" type="text/javascript">
    <!--
    var hasRightVersion = DetectFlashVer(requiredMajorVersion,
    requiredMinorVersion, requiredRevision);
    if(hasRightVersion) { // if we've detected an acceptable
    version
    var oeTags = '<object
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"'
    + 'width="100%" height="100%"'
    +
    'codebase="
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab">
    + '<param name="movie" value="NINA.swf" /><param
    name="loop"
    value="false"
    /><param name="menu" value="false" /><param
    name="quality" value="high"
    /><param name="scale" value="noscale" /><param
    name="bgcolor"
    value="#46442c"
    />'
    + '<embed src="NINA.swf" loop="false" menu="false"
    quality="high"
    scale="noscale" bgcolor="#46442c" '
    + 'width="100%" height="100%" name="NINA" align="middle"'
    + 'play="true"'
    + 'loop="false"'
    + 'quality="high"'
    + 'allowScriptAccess="sameDomain"'
    + 'type="application/x-shockwave-flash"'
    + 'pluginspage="
    http://www.macromedia.com/go/getflashplayer">'
    + '<\/embed>'
    + '<\/object>';
    document.write(oeTags); // embed the flash movie
    } else { // flash is too old or we can't detect the plugin
    var alternateContent = 'Alternate HTML content should be
    placed here.'
    + 'This content requires the Macromedia Flash Player.'
    + '<a href=http://www.macromedia.com/go/getflash/>Get
    Flash</a>';
    document.write(alternateContent); // insert non-flash
    content
    // -->
    </script>
    >>
    > One is
    http://eliasencpa.com
    > The other is...
    http://www.eliasencpa.com/TEST_091606.html
    >
    > thanks a lot.

Maybe you are looking for

  • Facebook like button does not work in my FF 32.0.2

    Dear FF support-team, I've got a strange problem with the Facebook like button (in German called: "Gefällt mir") on my site and after some trying around myself, I need your knowledge, as mine seems not to be enough. :-) I have got a Facebook-Like but

  • Deleting over 1000 images on iPhone

    I am trying to delete over 1000 photos on my iPhone.  I tried with image capture in apps, but an error occurs while importing.  it won't import or delete because go error.  what next?

  • Merge text formatted columns to single date column

    Hi folks, Not the most experienced of spreadsheet users, so hoping this is a quick fix: I need to combine text data from columns A (Year), B (Month) & C (Date) into a new column as a date. I've tried a few combinations of =DATE(C2,B2,A2), but can't p

  • Html 5 placeholder attribute and jsf 2.0???

    Hello, I need to use the html 5 placeholder attribute together with jsf 2.0. I noticed this is not included in the attribute for the jsf inputtext tag. Is there a way to circumvent this problem with jsf 2.0? Thanks in advance, J.

  • External hardrive in shared location after attempting to plug into TV

    Hi all... I recently plugged my external hard drive (transcend 1TB) into a TV. The TV failed to recognise it and as a result my mac now recognises it as a 'shared' and has a picture of a monitor and asks me for passwords to share? It's highly confusi