Any help regarding Graph cursor?

Hi All,
I am working with a multi plot graph and i am using a single cursor associated with all the plots.
In my application ,from the 10 plots user can select and view selected no of plots
ie,after execution it displays 10 plots now the user use some on/off buttons to view the selected plots.
My problem occurs related to cursor.
Some plots coincide(say plot1 and plot2),so even when i am not viewing the plot1 and only viewing plot2
the cursor legend shows as plot1 at some points where plot2 is also having value.
And if i am not viewing plot3, but i move the cursor through that location it shows plot3.
Can anybody help me to soft this?
Thnks....

Hi
taking a stab in the dark,as there no code to understand,
suggest you check in debug mode the cursor properties as your perform the selected operations.
apart from that its difficult to guess
xseadog

Similar Messages

My iPad mini was working very fine from last 9 months....but suddenly today I found it discharging from 100% to 34% though I didn't use it at all...and also found my mini is slightly heated up at the bottom..any help regarding this would be greatful

My iPad mini was working very fine from last 9 months....but suddenly today I found it discharging from 100% to 34% though I didn't use it at all...and also found my mini is slightly heated up at the bottom..any help regarding this would be greatful

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

Any help regarding iphone 4 and locks with o2

any help regarding iphone 4 and locks with o2
i just got my second hand iphone4
and a friend of a friend said it was factory unlocked
and received txt from o2 saying it was unlocked
however when i got home i put my micro sim into it
and
itunes said
"this sim card appears to be unsupported" or something similer
it is factory unlocked because the model number in the settings is
MC603B
i rang o2 to ask for unlock. gave them the imei code and they said they have to send the request off to apple for a code

i rang o2 to ask for unlock. gave them the imei code and they said they have to send the request off to apple for a code
Obviously the iPhone was/is not unlocked or this would not be required, and there is your answer, which can take up to two weeks.

Help regarding Inventory related concurrent managers to be assigned

Hi,
I am looking for a help regarding the below aspects
1)Which concurrent managers needs to be assigned to run the following five concurrent programs.
INV Transaction Worke
Inventory transaction worker
Interface Trip Stop
Min Max report planning
Pick selection List Generation
2)We are facing issues with the above jobs. Currently except Inventory transaction worker all the other concurrent programs are running under standard manager.
because of which Min max planning report programs are piling up under standard manager. Min max programs were going to “Pending” status and never getting picked up as they were waiting for other programs in the queue to get finished. There were thousands piled up after the environment was bring up.
How can we solve this issue.. please suggest

835129 wrote:
The metalink notes you provided didnt gave me any information about the concurrent managers under which these programs should run. Any help regarding concurrent managers would be helpfulI believe you have not read my reply properly since I mentioned "WIP Move Manager and Inventory Manager". Plus, the docs mention it clearly so please read it again!
Thanks,
Hussein

Need help regarding image scanning from scanner and resizing it...

Hi,
I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!
Thanks,
Avinash.
Edited by: Kalakonda on Jul 24, 2009 8:08 AM

Kalakonda wrote:
I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!So what you are doing is you have a Scanner (hardware: like an HP flatbed scanner) attached to a server that you want to use as a scanning station? Is this the senario that you are talking about?

When I open Firefox, it goes to the first page and then stops, saying "Not Responding" with the cursor spinning. What can I do to fix this? Thanks for any help

When I open Firefox, it goes to the first page I open, but then stops and says "Not Responding" with the mouse cursor spinning. I hit the close button and it says Windows is searching for a solution (which doesn't come).
When I open Firefox again, it says:
Well, this is embarrassing.
Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
You can try:
Removing one or more tabs that you think may be causing the problem
Starting an entirely new browsing session
Any ideas? I gretly appreciate any help. Thanks!!

What is that first page?
Can't you open any web pages in Firefox?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

I have this empty black box in middle of screen with cursor in it after upgrading from SnowLeopard to Mavericks - any help???

I have this black outlined box with cursor stuck in it after upgrading from Snow Leopard to Mavericks -- any help??? I can't get rid of it.

From another thread.
https://discussions.apple.com/message/24902799#24902799
Go to accesibility/zoom/more options/show rectangle... and uncheck that.
Strange outline rectangle on my screen...

My macbook pro decided to give a different res and a horizontal line follows my cursor (like a diagnostic mode or something) i have shutdown/restrted. Fixed the res but the cursor problem still exists any help please.

I was using my mac as normal and then my resultion on mr screen changed which i have fixed using the normal methods but i still continue on getting a horizontal line whereever my cursor is even after i have restarted and shut down. The line is a white colour but my other screens seem dulled wherever this line is not following it is not a solid white. It looks like its in a diagnostic mode or somthing. Any help would be appriciated, thanks.

It is possible there is a problem with the computer's graphics, but try a simple fix. viz. reset the NVRAM / PRAM.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Hi i am new to SCN. I want a help regards SAP-PM . Where to post any query regards SAP PM

Hi i am new to SCN. I want a help regards SAP-PM . Where to post any query regards SAP PM

Please check this link SAP Portfolio and Project Management (SAP RPM, cProjects) and cFolders
Please check scn index to find relevant forum link.
SCN Site Index

TS3694 Hallo I can not restore my iPhone with the computer any more. Error 1015 comes up. Any help? Regards Christiane

Hallo I can not restore my iPhone with the computer any more. Error 1015 comes up. Any help? Regards Christiane

Your only hope is to place your phone in to DFU mode and restore it using iTunes (if iTunes allows you to).
Search in Google "Force iPhone in to DFU mode" and follow the instructions precisely.

I am having trouble installing Itunes 11.1.1. I get an error message 2502 and 2503. Any help in this regard would be appreciated.

I am having troble installing Itunes 11.1.1. I get erro message 2502 and 2503. Any help?

Windows 7 32 bits
I had the same issue which is now solved. For your information, the following procedure was successful:
Check permissions within the Installer folder. To do this, follow these steps.
1. Click on Start and in the Start Search bar > type in > c: /windows/installer.
2. Right click on c: /windows/installer at the top under programs and click properties.
3. Click on the security tab > Verify if System and Administrator account has Full access permissions.
Note : I ran into problem with locating the C:\windows\installer directory. For some reason Windows Explorer wouldn't show it even though I don't have it hidden. I ended up using the ExplorerXP application to locate the directory. ExplorerXP is available at http://www.explorerxp.com/

Bode magnitude graph cursor not following plot

Hi,
I was wondering if anyone would be able to shed some light on a problem that I am having regarding an XY graph cursor.
I have developed a simple VI to determine the characteristics of a low pass filter using a sine wave ramped in frequency and subsequently monitoring the gain of the filter to create a Bode plot.
Through analysis of the Bode plot I would like to determine the cut-off frequency of the low pass filter under test. I have introduced a cursor into the graph and using a property node I hoped to drive the cursor to the -3dB point in the Y axis and output the cursors corresponding X position thereby determining the cut-off frequency of the filter.
However the cursor never seems to follow the plot beyond the first step of the loop. It feels as if there is a break in the plot between the 1st and 2nd iteration of the while loop used to ramp the signal generator.
I've tried to work out why the cursor won't follow the plot to -3dB but so far I am stumped.
Any help or advice that you could provide would be greatly appreciated ! I have provided the attached VI for clarity.
So liberate your minds and give your soul expression. Open up your hearts, I'll sing for you this song. Let the people sing !
Solved!
Go to Solution.
Attachments:
LPF Auto Test.vi ‏109 KB

I have corrected your VI.
First, you needed to put the property node AFTER the while loop, because you need the graph to be done first and then look at the frequency cut off.
Second, in LV, the property nodes are read from top to bottom. So you need to place the cursor at Y = -3 first, and then read the X position.
I attached the corrected vi
Giuliano Franchetto
Student at the l'Ecole Nationale Supérieure des Mines de Saint-Etienne, cycle ISMIN (FRANCE)
Attachments:
LPF Auto Test.vi ‏109 KB

Digital graph cursor text not visible after build

We are using Labview 2011. Our application has been using digital graphs, with cursor text to define digital transition information since Labview 7.1. We have ported our application to Labview 2011 (and also 8.6.1 in which it works fine). While in the Labview development environment, the cursor text displays correctly. However when we build it, and run the .exe, we cannot see the cursor text. Our debugging efforts have been in vain - the xy locations are correct, but the cursor text is not visible.
We want to standardize our next version software on 2011 (even though the Labview 2011 version is 4x larger and 2.2 x slower than the Labview 7.1 version) because we need x64 support, and want to run in Linux as well. We have spent considerable time trying to find out what is wrong, but the debugging time is very long to go through the thought - build - run cycle.
Any help on why this might be would be gratefully appreciated.
- Bart Schroder, Cleverscope

Bart,
Can you please post a screenshot of your code as well as what's happening when you run your code?
Thanks,
Renee M
Applications Engineer
National Instruments
Regards,
Renée M
Applications Engineer
National Instruments

Any way to use cursor values inside other cursor by bulk collect?

hi,
Is there any way to use cursor get_tables value insdide loop get column if i am using bulk collect in both cursors?
I tried a lot but i am nt able to do it.kindly help...
create or replace procedure MULTIPLE_CURSORS_PROC is
v_owner varchar2(40);
v_table_name varchar2(40);
v_column_name varchar2(100);
cursor get_tables is
select distinct tbl.owner, tbl.table_name
from all_tables tbl
where tbl.owner = 'SYSTEM';
cursor get_columns is
select distinct col.column_name
from all_tab_columns col
where col.owner = v_owner
and col.table_name = v_table_name;
begin
open get_tables;
loop
fetch get_tables into v_owner, v_table_name;
open get_columns;
loop
fetch get_columns into v_column_name;
end loop;
close get_columns;
end loop;
close get_tables;
end ;

hi there
Refer this
CREATE OR REPLACE PROCEDURE MULTIPLE_CURSORS_PROC
IS
   TYPE scol IS VARRAY (10000) OF VARCHAR2 (32767);
   v_table_name    scol;
   v_column_name   scol;
   TYPE curtyp IS REF CURSOR;
   get_columns     curtyp;
   CURSOR get_tables
   IS
      SELECT   DISTINCT tbl.table_name
        FROM   all_tables tbl
       WHERE   tbl.owner = 'SYSTEM';
BEGIN
   OPEN get_tables;
   LOOP
      FETCH get_tables BULK COLLECT INTO   v_table_name;
      FOR indx IN v_table_name.FIRST .. v_table_name.LAST
      LOOP
         SELECT   DISTINCT col.column_name
           BULK   COLLECT
           INTO   v_column_name
           FROM   all_tab_columns col
          WHERE   col.table_name = v_table_name (indx);
         FOR ind IN v_column_name.FIRST .. v_column_name.LAST
         LOOP
            DBMS_OUTPUT.put_line (v_column_name (ind));
         END LOOP;
      END LOOP;
      EXIT WHEN get_tables%NOTFOUND;
   END LOOP;
   CLOSE get_tables;
END MULTIPLE_CURSORS_PROC;regards
Hitesh

Macbook pro 2011 13" i5 slowed down, any help would be much appreciated (detailed info).

Ok first off let me preface with as much detailed information as possible, as i have read many many posts on problems and hopefully mine will be detailed enough to not cause all you wonderful people a headache.
Machine Details
Macbook Pro 13inch model (2011)
Core i5 4gb RAM 250gb Standard harddrive
As I am a very inexperienced I would very much appreciate a very idiot proof explaination, but any help I will be very thankfull for.
The laptop was running like a dream and much better than I remembered my last mac (Macintosh LC) ever did. Ive had minor hickups this last year (a trackpad that went bust under warranty and a broken power supply) otherwise its been a wonderfull experience. The final hiccup that might be a cause, not sure hence I will mention it is that my battery is Conditon: Replace Now for about a month now.
The laptop, as always was left ON, on its own connected to the wifi home network, when I returned the computer was working very slow. Any load on the harddrive/CPU. The cursor starts lagging (jumping), any keypresses are registered with a 2-10second delay. Any vidoes that i would try to play would suffer freezes in framerates/jams but audio remained fine. First step i was afraid that i may have contracted one of the new trojans so i downloaded an antivirus program, scanned the drive, but came out clean. Second step was to format the drive and perform a fresh install of OSX but no luck. Being inexperienced in Apple products i assumed that my harddrive (used to PCs) was on the fritz and went out and bought a 160gb Western Digital Black series 2.5inch harddrive. Having read all the guides and official knowledge bases on how to swap out the harddrive I did so with success. I placed in my installation OS 10.6 CD formatted the drive through the disk utility and performed a fresh install. Before doing any steps I went through the update cycle a couple of times till only the thunderbolt update remained (havent updated as I never used it). Sadly it hasnt solved the problems with cursor repsonse lag, video playback, and keyboard input lag under load.
On this install I have performed:
Verify Disk Permissions Many were found so I performed Repair Disk Permissions
Verify Disk Came up with "Appears to be OK"
performed a Pram reset (CMD+option +P +R)
My main problem is that I live in europe nowadays (Poland to be precise) and cant go to a genius bar as they dont exist, and sadly the support is a tad behind the US standards and any minor repair will be at least a 4 week wait, hence i would like to try to exhaust possible solutions before giving it off to professionals: being a month out of the warranty period has abit to do with it too:)
Sorry for the wall of text
Thanks guys for any help you could throw my way!
Chris M

See the following:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
You may want to check for other issues outlined here:
Helpful Links Regarding Flashback Trojan
Visit Thomas Reed's site for insight and help: Mac Malware Guide
A Google search can reveal a variety of alternatives on how the remove the trojan should your computer get infected. This can get you started. However, be careful about what you do as new variants of the malware circumvent the efforts of earlier tools.
Also see Apple's article About Flashback malware.
Apple has released Java updates for Snow Leopard and Lion users:
Java for OS X Lion 2012-003; available only for users of Lion with Java installed.
Java for Mac OS X 10.6 Update 8; available only for users of Snow Leopard.
Flashback malware removal tool; available only for users of Lion without Java installed.
Install whichever shows up in Software Update. It removes the malware (if present), updates Java (if present) and tightens up Java settings for the future. You may download from Apple's web site instead of using Software Update, but it's important to know which one to get, because the other two won't work for you.
For the truly paranoid see 10 Simple Tips for Boosting The Security Of Your Mac.
However, I find it hard to understand the problems you describe on a computer if you erased the drive and reinstalled a fresh copy of OS X.

Any help regarding Graph cursor?

Similar Messages

Maybe you are looking for