Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!
Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!
This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly.
Similar Messages
-
Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?
Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Do I need to download the additional content of Logic Pro X every time I install it on each of my computers?
A poster in the following thread gives a direct download link to the installer package:
https://discussions.apple.com/message/22495063#22495063
...if that works and Logic Pro X recognises that it's been installed at startup, then clearly you can just download it the one time and manually install it on each computer. Unfortunately the App Store doesn't appear to provide a way to export and subsequently authorise installation archives for downloaded applications, though, so you'll still have to download the 600-odd-MB core of Logic via the App Store on each machine. -
Every time i press enter, my keyboard keeps typing backslash even though i am not holding the backslash key. Help.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
i have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable
See: http://support.apple.com/kb/TS3694#USB
However, the most likely reason is your self-repair of a device that is only factory repairable broke something. Note that Apple does not sell replacement parts, so whatever parts you used were not made by Apple's supplier and are of questionable quality. -
when I m opning datepicker (by jquery 1.7.3 min.js) it will work on normal UI but it's dropdown not working in dialog UI after I closed the dialog the datepicker dropdown works
and also it works in older version of firefox like 15.0Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
How do I get rid of a forged site that keeps coming back every time I log on ???
Forgery comes up all the time.
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
You can open the <b>about:config</b> page via the location/address bar and search for prefs that refer to this website.
You can reset user set (bold) prefs via the right-click context menu to the default value.
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
You can check the home page setting:
*Tools > Options > General > Startup: Home page
Firefox supports multiple home pages separated by '|' (pipe) symbols.
*https://support.mozilla.org/kb/How+to+set+the+home+page
You can check for problems with the sessionstore.js file in the Firefox profile folder that store session data.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
I have an iPhone 3GS and was trying to restore it...
Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do.
Any ideas on how to get it working again?This means that the phone was previously hacked to carrier unlock (unauthorized unlock), and when you restored, the hack was removed and it became re-locked to its original carrier. It will now accept a SIM card only from that carrier.
Your only option is to contact the carrier it's locked to and enquire if they will provide authorized unlocking. Not all carriers will unlock and those that do usually have requirements and qualifications - i.e. you have to be a current or former customer in good standing. -
Hello, starting with today I have a strange problem with Final Cut Pro X: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?
Here`s the screenshot.
But anyway:
The drive is Makintosh HD from my Macbook and it is shown in the event mediathek and in the projects. Since I`ve recognized this problem I installed FCPX again and consequently the event and project directory created by FCPX is where it should be and it shows all the test events including it`s files.
So what happens? Opening FCPX you see only one event and that a new empty event. All previous events are not shown there even if you can see them in the finder. So if you import again the clips they are in this new event library. After closing correctly FCPX and reopening there again is nothing than an new and empty event. What it does is that it recognized that i.e. there are events with previous numbers and so it creates an new one with the next available counting number.
If you want to open one event from the finder it by clicking to the file it opens FCPX but it says it cannot open the clicked file. -
I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help
Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac -
After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.
I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.
-
Since I updated my iPad 2,it makes a shutter sound ( like its taking a picture) every time I close its cover,or even when I just set it down. Any idea on how to fix this? Thank you!
Omg, it worked! Thank you so much --- it's been driving me nuts for weeks now! The sound can get really annoying, lol!
-
i keep getting a message saying 'the iphone software update server could not be contacted' when trying to restore my iphone. Any ideas on how I can rectify this? Thank you
Thank you. No my phone hasnt been jailbroke, therefore I'll keep trying.
-
Hi, I keep getting an error message saying "the itunes library cannot be saved. an unknown error occurred. (-50). Any ideas on how to stop this appearing? Thanks!
Error -50 is a very unhelpful generic communications error with a number of possible causes. Something between the drive to which you are downloading and the drive from which it is all coming is not working correctly, which probably leaves several hundred options.
-
Hi. I can't get the flash on my iPhone 5 to work. Does anyone have any ideas on how to troubleshoot this. Any help would be appreciated. Thanks.
Tap Camera App > switch to video > see if the flash will turn ON. If still problem, Restore your iPhone with iTunes on computer. See if fixed. If still problem, your iPhone has full Warranty with Apple.
Maybe you are looking for
-
How can I share files from Snow Leopard to Lion?
I have an iMac running 10.6.8 with file sharing turned on. (I've tried AFP and SMB). I am trying to connect to the iMac on my LAN using a Macbook Pro with 10.7.5. I am immediately prompted to authenticate – so I am confident a connection is being mad
-
How do I auto fill a date field for an Adobe form?
Hi. I am new to Acrobat. I would like to have Acrobat auto fill today's date in a date field when I open an acrobat form. I check the forum help and it indicated that I associate this javascript text to the field: var f = this.getField("Today"); if (
-
Low ink message for Deskjet D1341 connected to HP Pavillion always on
Printing continues fine and I replace the cartridge when the ink actually fades. Is there a way to permanently disable this low ink message and is it safe to do so?
-
Material not going to unrestricted stock
Dear SAP Gurus While posting the goods reciept the material is not going to underestricted stock it is going to Sale order stock please let know the reason y. Due to Tick mark -Requirements in MRP-4 view Can any body suggest y it is happening Rgds R
-
I can't rename a Workstation.
Environment: NW 6.5, Zfd 4, eDir 8734 I'm trying to rename an imported workstation from: SY13-01-SITEA - XX:XX:XX:XX:XX:XXWIN2000 to: SY13A-01-SITEA - XX:XX:XX:XX:XX:XXWIN2000 and I keep getting the following error: Invalid Character(s) in Object nam