Any issues upgrading from 1.0.2 to 1.1.2?

Hello,
I have a regular unhacked/locked phone and it's on 1.0.2. I never upgraded to 1.1.1 because of the rumor of the battery draining issue. I have very good battery usage. Now that 1.1.2 seem to have fix that, I'd like to upgrade.
So I'd like to hear from anyone who upgraded from 1.0.2 to 1.1.2 whether there was issue or not.
Thanks in advance.

Answering my own question. Just took the leap and upgraded from 1.0.2 to 1.1.2. No problems at all. Took all of 15 minutes. Had the phone connected the whole time and didn't disconnect until the entire process is finished with the message that the phone has been activated.
There were two "hold my breath" spots, one is the yellow triangle with "connect iPhone to iTune", the other is the end of upgrade with the white plug to iTune icon and something about emergency call. Both lasted 2-3 seconds before the process continued on.
Now I get to have fun with the new features. I'll monitor the battery usage as I was getting excellent usage with 1.0.2.

Similar Messages

Any Issues Upgrading from Word 2003 to 2007?

Hello. We have the option in my department to upgrade from
Word 2003 to Word 2007. My team still has some help projects in
RoboHelp for Word. Before we decide to upgrade, I was wondering if
anyone else using RoboHelp 7 (for Word) has upgraded to Microsoft
Word 2007, and if they have encountered any issues. Thanks for any
input.

Thanks for all the helpful feedback, everyone. Here's an
update, just fyi. I loaded Office 2007 today, and seem to be
encountering one of the issues described by David Hurlston. When I
try to create a new popup, it takes a little over one minute for
the Insert Popup window to appear. Then when I select the topic to
which I want to link and click OK, it takes another 10 seconds or
so for the link to appear.
I also received the "Microsoft Office Word has encountered a
problem and needs to close" error five times in the past hour, when
just trying to add new topics. I ran Microsoft Office Diagnostics,
and it was unable to diagnose the cause of the crash. I'm using
RoboHelp for Word 7.0, Build 7.02.001. (I have the full Adobe
Technical Communication Suite with all of the latest updates
installed, and just loaded Office 2007 today, along with all of the
latest Windows and Office updates.)
This is the perfect time for our team to upgrade to Office
2007 since we're at the very beginning of a release, so I'm going
to continue testing to see if I can figure out why it's a bit
sluggish and why it's crashing. I just wanted to follow up on my
original post in case any of this info is helpful.
On a semi-related note... I'm usually pretty good about
finding my way around in new user interfaces, but it took me about
ten minutes to figure out how to access the Insert Popup window
(due to the new Word UI). If anyone knows of a handy reference
guide for people upgrading to RoboHelp for Word 2007, let me know.
I checked the LiveDocs for RoboHelp for Word, but the version I
found currently contains the old icons I'm used to. (I'm hoping to
find some type of quick reference that explains where to find
things that have moved and/or changed icons. I found a great
interactive tool on Microsoft's site, but it seems to be specific
to Word docs, without addressing the RoboHelp-specific options.)
Thanks again for all the input!

Hi to All, My wife still has ios 6 on her ipad (she likes the look). I will do the 7.1 upgrade when it is released. Should there be any issues going from 6 directly to 7.1? Thanks!

Hi to All, My wife still has ios 6 on her ipad (she likes the look). I will do the 7.1 upgrade when it is released. Should there be any issues going from 6 directly to 7.1? Thanks!

There shouldn't be. I went from iOS5.whatever to iOS6.1 with no issues.
Just make sure to back everything up before you do it, just in case all doesn't go as planned.
I always do mine the old fashioned way, download the full OS via iTunes so if you've already got it linked to a computer and been using iTunes to do updates/syncing that's how I'd suggest you do it.

Any issues upgrading to Maverick from OS 10.6.8 on a MacBook?

Any issues upgrading to Maverick from OS 10.6.8 on a MacBook?

Model Name:          MacBook
Model Identifier:          MacBook5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz

Issues upgrading from 7.5.1 to 10gR3

We are having issues upgrading from Content Server 7.5.1 to 10gR3 running a Sql Server 2005 back end (based on Windows Server 2003).
We run through the upgrade process (which completes with warnings), but when we try to start the Content Server, we get the following error:
( 0%) Changing lengths of fields in table 'DocFormats'...
system 01.17 12:17:42.738 main When asking the database
for a list of tables, we got no tables back (internal)
01.17 12:17:42.753 main !
csUnableToLocateDatabaseTable,DocFormats-exception stack
intradoc.data.DataException: !
csUnableToLocateDatabaseTable,DocFormats
<snip>
Unable to locate table 'DocFormats' in database.
We are looking for advice from anyone who has been through this upgrade (in the same type of environment), or who have encountered this error or anything like it. The error appears to indicate a database access issue, but we have profiled the upgrade and startup, and have proved that the processes are reaching the database. We
have also tried the install against clean and complex installs, and have tried both JDTS and Microsoft drivers without success (same error).
We have spent many days on this, and have been working with Oracle support, but are starting to worry about how realistic the upgrade is.
Cheers,
Dave T

Oracle support suggested I execute an "exec sp_changeobjectowner 'DocFormats','<SchemaName>" command against the database.
I did this for the DocFormats table only.
When I tried to start the instance, the error message stated the DocFormats table was now missing.
Inside the database, the table 'Stellent.DocFormats' was visible through SQL Server management.
I then created a copy of this table as 'dbo.DocFormats' (as it was originally), and tried starting the process again (with the config.cfg variables you suggested).
It turns out the upgrade process can now see the DocFormats table and upgrade it successfully (The dformat column is now showing as varchar(80) ).
The startup process now fails at the very next table in the upgrade list (see output below).
Sounds like a database owner/permissions issue.
Any ideas from anyone with SQL Server experience?
Output from \bin\idcserver.exe -console -debug:
11:05:30.006     main     SELECT dValue FROM Config WHERE dSection='DevUpdate' AND dName='MetaFieldLengthUpdateV8'
systemdatabase     01.18 11:05:30.006     main     1.79 ms. SELECT dValue FROM Config WHERE dSection='DevUpdate' AND dName='MetaFieldLengthUpdateV8'[Executed. Returned row(s): false]
systemdatabase     01.18 11:05:30.006     main     SELECT dValue FROM Config WHERE dSection='DevUpdate' AND dName='FormatFieldLengthUpdateV8'
systemdatabase     01.18 11:05:30.006     main     2.56 ms. SELECT dValue FROM Config WHERE dSection='DevUpdate' AND dName='FormatFieldLengthUpdateV8'[Executed. Returned row(s): false]
( 0%) Changing lengths of fields in table 'DocFormats'...
systemdatabase     01.18 11:05:30.022     main     getColumns DocFormats
systemdatabase     01.18 11:05:30.022     main     1.66 ms. getColumns DocFormats[Retrieved 3 columns.]
systemdatabase     01.18 11:05:30.084     main     Table list: DocFormats
systemdatabase     01.18 11:05:30.084     main     SELECT * FROM DocFormats
systemdatabase     01.18 11:05:30.084     main     2.83 ms. SELECT * FROM DocFormats[Executed. Returned row(s): true]
systemdatabase     01.18 11:05:30.100     main     Delete DocFormats
systemdatabase     01.18 11:05:30.116     main     drop table DocFormats
systemdatabase     01.18 11:05:30.256     main     148 ms. Delete DocFormats[Executed]
systemdatabase     01.18 11:05:30.256     main     Connection with id of 'main.1' is removed from active connections with key of 'main'.
systemdatabase     01.18 11:05:30.256     main     release pool connection
systemdatabase     01.18 11:05:30.256     main     assigning connection
systemdatabase     01.18 11:05:30.256     main     Connection with last id of <unassigned> is added to active connections with key of 'main'.
systemdatabase     01.18 11:05:30.256     main     Assigned connection to this thread, took 0.49 ms.
systemdatabase     01.18 11:05:30.256     main     Preparing connection for use, id initialized as main.2
systemdatabase     01.18 11:05:30.256     main     dFormat varchar(80) NOT NULL, dConversion varchar(30) NULL, dDescription varchar(80) NULL|PK_DocFormats| PRIMARY KEY (dFormat)
systemdatabase     01.18 11:05:30.256     main     CREATE TABLE DocFormats (dFormat varchar(80) NOT NULL, dConversion varchar(30) NULL, dDescription varchar(80) NULL, CONSTRAINT PK_DocFormats PRIMARY KEY (dFormat))
systemdatabase     01.18 11:05:30.256     main     7.25 ms. dFormat varchar(80) NOT NULL, dConversion varchar(30) NULL, dDescription varchar(80) NULL|PK_DocFormats| PRIMARY KEY (dFormat)[Executed.]
systemdatabase     01.18 11:05:30.256     main     Connection with id of 'main.2' is removed from active connections with key of 'main'.
systemdatabase     01.18 11:05:30.256     main     release pool connection
systemdatabase     01.18 11:05:30.256     main     assigning connection
systemdatabase     01.18 11:05:30.256     main     Connection with last id of <unassigned> is added to active connections with key of 'main'.
systemdatabase     01.18 11:05:30.272     main     Assigned connection to this thread, took 2412 ns.
systemdatabase     01.18 11:05:30.272     main     Preparing connection for use, id initialized as main.3
systemdatabase     01.18 11:05:30.272     main     SELECT * FROM DocFormats
systemdatabase     01.18 11:05:30.288     main     4.26 ms. SELECT * FROM DocFormats[Executed. Returned row(s): false]
systemdatabase     01.18 11:05:30.288     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/msword', 'PassThru', 'apMicrosoftWordDesc')
systemdatabase     01.18 11:05:30.288     main     2.93 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/msword', 'PassThru', 'apMicrosoftWordDesc')[Executed. 1 rows affected.]
( 0%) Importing table 'DocFormats'...
systemdatabase     01.18 11:05:30.288     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/pdf', 'PassThru', 'apPdfOptimization')
systemdatabase     01.18 11:05:30.288     main     1.87 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/pdf', 'PassThru', 'apPdfOptimization')[Executed. 1 rows affected.]
systemdatabase     01.18 11:05:30.288     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/rtf', 'PassThru', 'apRtfDesc')
systemdatabase     01.18 11:05:30.303     main     2.06 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/rtf', 'PassThru', 'apRtfDesc')[Executed. 1 rows affected.]
systemdatabase     01.18 11:05:30.303     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.ms-excel', 'PassThru', 'apMicrosoftExcelDesc')
systemdatabase     01.18 11:05:30.303     main     1.70 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.ms-excel', 'PassThru', 'apMicrosoftExcelDesc')[Executed. 1 rows affected.]
systemdatabase     01.18 11:05:30.303     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.ms-powerpoint', 'PassThru', 'apMicrosoftPowerPointDesc')
systemdatabase     01.18 11:05:30.303     main     1.69 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.ms-powerpoint', 'PassThru', 'apMicrosoftPowerPointDesc')[Executed. 1 rows affected.]
systemdatabase     01.18 11:05:30.303     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.ms-project', 'PassThru', 'apMicrosoftProjectDesc')
systemdatabase     01.18 11:05:30.303     main     1.53 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.ms-project', 'PassThru', 'apMicrosoftProjectDesc')[Executed. 1 rows affected.]
systemdatabase     01.18 11:05:30.303     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.visio', 'PassThru', 'apVisioDesc')
systemdatabase     01.18 11:05:30.303     main     1.63 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.visio', 'PassThru', 'apVisioDesc')[Executed. 1 rows affected.]
systemdatabase     01.18 11:05:30.303     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/wordperfect', 'PASSTHRU', 'apWordPerfectDesc')
systemdatabase     01.18 11:05:30.303     main     1.98 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/wordperfect', 'PASSTHRU', 'apWordPerfectDesc')[Executed. 1 rows affected.]
systemdatabase     01.18 11:05:30.303     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/write', 'PassThru', 'apMicrosoftWriteDesc')
systemdatabase     01.18 11:05:30.319     main     4.89 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/write', 'PassThru', 'apMicrosoftWriteDesc')[Executed. 1 rows affected.]
systemdatabase     01.18 11:05:30.319     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('image/graphic', 'ImageThumbnail', 'apThumbnailsDesc')
systemdatabase     01.18 11:05:30.319     main     2.12 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('image/graphic', 'ImageThumbnail', 'apThumbnailsDesc')[Executed. 1 rows affected.]
systemdatabase     01.18 11:05:30.319     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('text/html', 'PassThru', 'Hyperlink text document')
systemdatabase     01.18 11:05:30.319     main     1.84 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('text/html', 'PassThru', 'Hyperlink text document')[Executed. 1 rows affected.]
systemdatabase     01.18 11:05:30.319     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('text/plain', 'PassThru', 'Text file')
systemdatabase     01.18 11:05:30.319     main     1.66 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('text/plain', 'PassThru', 'Text file')[Executed. 1 rows affected.]
systemdatabase     01.18 11:05:30.319     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('text/postscript', 'Distiller', 'apDistillerDesc')
systemdatabase     01.18 11:05:30.319     main     1.60 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('text/postscript', 'Distiller', 'apDistillerDesc')[Executed. 1 rows affected.]
( 17%) Changing lengths of fields in table 'ExtensionFormatMap'...
systemdatabase     01.18 11:05:30.319     main     Alter ExtensionFormatMap
systemdatabase     01.18 11:05:30.335     main     !csDbUnableToPerformAction_alter,\!csDbTableMissing
(internal)     01.18 11:05:30.335     main     setExceptionCause threw: null
systemdatabase     01.18 11:05:30.335     main     15 ms. Alter ExtensionFormatMap[!csDbTableMissing]
systemdatabase     01.18 11:05:30.335     main     Connection with id of 'main.3' is removed from active connections with key of 'main'.
systemdatabase     01.18 11:05:30.335     main     release pool connection
(internal)     01.18 11:05:30.350     main     !csDbUnableToPerformAction_alter,\!csDbTableMissing-exception stack
intradoc.data.DataException: !csDbUnableToPerformAction_alter,\!csDbTableMissing
     at intradoc.jdbc.JdbcWorkspace.alterTable(Unknown Source)
     at intradoc.server.IdcExtendedLoader.changeFieldLength(Unknown Source)
     at intradoc.server.IdcExtendedLoader.expandFormatFieldLengthsV8(Unknown Source)
     at intradoc.server.IdcExtendedLoader.extraBeforeCacheLoadInit(Unknown Source)
     at intradoc.server.IdcSystemLoader.loadCaches(Unknown Source)
     at intradoc.server.IdcServerManager.init(Unknown Source)
     at IdcServer.init(Unknown Source)
     at IdcServer.main(Unknown Source)
Caused by: java.sql.SQLException: !csDbTableMissing
     ... 8 more
Unable to alter table '!csDbTableMissing'.

Issue: Upgrading from 11i to R12 - zxmiggltaxopts.sql

Hi,
we are upgrading from 11.5.10.2 to 12.1.1. During upgrade patch, one of the worker zxmiggltaxopts.sql has failed with below errors:
sqlplus -s APPS/***** @/orafinx/apps/apps_st/appl/zx/12.0.0/patch/115/sql/zxmiggltaxopts.sql
declare
ERROR at line 1:
ORA-20001:
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.ZX_MIG_GL_TAX_OPTIONS_PKG", line 131
ORA-06512: at line 8
We are unable to find any hits for this particular error in MOS. Have any one else on the forum faced this particular issue? any known issues or workarounds that might help us ?
Thanks a lot for your help.
Regards,
Kai

Similar issue is reported in (Bug 8608790: APPLYING PATCH: ADWORKER FAILED /ORA-06512: AT) but it is not much helpful.
I would suggest you log a SR.
Thanks,
Hussein

Any issue upgrading to Mountain Lion on a 15 inch MBP

I haven't upgraded to Mountain Lion yet and I'm considering doing it. Any issues I should know about? I have a Mid 2010 MBP 15 inch. Thanks!

Not really.
Repair the hard drive and permissions.
Make a cloned backup using Disk Utility.
Purchase and download Mountain Lion.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Any problems/issues upgrading from iPhoto 6.0.6 to iPhoto 8?

Hello, I am about to purchase iLife 08 and upgrade iPhoto 6 to iPhoto 8. Does anyone know of any problems in doing this, pitfalls to watch out for, etc.? Thanks, PP

pokerpal
No issues but there are changes.
Have you your photos organised in Rolls in v6? If so, make sure that each roll has a name other than the default one. So make sure your Roll 123 is named Spring 06 or whatever, otherwise the rolls will be split into Events. The primary difference between Events and Rolls is that Events are based on the date the pics were taken, rolls on the dates the pic were imported.
You can rename rolls using the Info Pane (wee 'i', lower left) the name and date fields are editable.
If you've no interest in Rolls, then ignore the above.
Other than that make a back up, of course. Then update iLife and simply launch iPhoto. It will ask is it okay to upgrade the library. Say yes and off you go.
With iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Unix Style Package File. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. Before you panic:
There are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Known Issues Upgrading from Apex 3.0.1 to 3.1.1

Hi,
We are in the process of upgrading to 3.1.1 from 3.0.1, are there any known issues (critical) that people can share?
Have heard that there might be an issue with the Shuttle item - is this correct?
Thanks.
Tony.

Hello,
>> Have heard that there might be an issue with the Shuttle item - is this correct?
I’m not aware of any critical issues with the shuttle item, or any other items, for that matter, regarding upgrade to 3.1.1. However …
Version 3.1 introduced extensive use with the ‘FIELDSET’ tag, in all the compound items, like data picker, checkboxes, shuttle etc. This use might cause some layout problems, or the need to adjust some JavaScript code, but nothing that can’t be overcome. You can read the following for some more details:
FIELDSET – new layout behavior in 3.1.1
3.1 upgrade problem: Post Element Text does not align properly
Other than that, and as far as my own experience goes, it’s a smooth upgrade.
Regards,
Arie.

BO XI InfoStore Service Issue - upgrading from CR 10 to BO XI

Ours is a Java web application that works with BO 10. After we upgraded to BI XI, when I login to the CMS server (successfully) and try to get the InfoStore with this code
IInfoStore iStore = (IInfoStore) es.getService("InfoStore");
I get the following exception
ERROR: 2011-06-28 20:20:53,738 com.crystaldecisions.enterprise.ocaframework.WireOb2Unpacker - initialize(): invalid xrl,3&U=10,03&.1={3&1=301,03&2=301,03},2z&.2={3&1=302,03&2=302,03},2z&.3={3&1=303,03&2=303,03},2z&.4={3&1=304,03&2=304,03},2z&.5={3&1=305,03&2=305,03},2z&.6={3&1=306,03&2=306,03},2z&.7={3&1=307,03&2=307,03},2z&.8={3&1=308,03&2=308,03},2z&.9={3&1=309,03&2=309,03},2z&.?={3&1=310,03&2=310,03},2z
com.crystaldecisions.celib.exception.c: ASSERTION FAILED
     at com.crystaldecisions.celib.trace.d.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.k.a(Unknown Source)
     at com.crystaldecisions.celib.properties.Property.a(Unknown Source)
     at com.crystaldecisions.celib.properties.Property.getPropertyBag(Unknown Source)
     at com.crystaldecisions.celib.properties.PropertyBag.getPropertyBag(Unknown Source)
     at com.crystaldecisions.sdk.occa.pluginmgr.internal.a.getSecurityInfo(Unknown Source)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.<init>(Unknown Source)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStoreFactory.makeOCCA(Unknown Source)
     at com.crystaldecisions.sdk.framework.internal.a.getService(Unknown Source)
     at com.crystaldecisions.sdk.framework.internal.a.getService(Unknown Source)
This does NOT happen when I connect to CR 10. Only with the new BO XI, I come across this issue. I am using the sdk from BO XI installation. I tried on Java 1.4 and 1.6 with the same results.
The report viewer (CrystalReportViewer) throws a NullPointerException when the following is executed in the jsp
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
stack trace:
java.lang.NullPointerException
     at com.crystaldecisions.enterprise.ocaframework.ServerSpec.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.ServerSpec.<init>(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.AbstractServerHandler.buildServerInfo(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.AbstractServerHandler.buildClusterInfo(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.u.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.do(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.l.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.m.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.j.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.j.<init>(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.PageServerRequesterFactory.makePageServerRequester(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.c.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.c.getPage(Unknown Source)
     at com.crystaldecisions.report.web.viewer.ReportAgent.a(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewer.goto(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
     at org.apache.jsp.jsp.reportviewer.ReportViewer_jsp._jspService(ReportViewer_jsp.java:54)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:92)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:720)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:162)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:240)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:187)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:720)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:628)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:383)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:307)
I am not sure if the BO installation on the server is the issue or the code on the application side. Also our administrator says that he does not see any log (audit) to attribute to my issues.
Thank you in advance for any help you may provide in resolving this.

The problem that you are encountering may be due to conflicting or not up-to-date jar files in your cutom web application.
I would suggest that you confirm that the BusinessObjects jar files that you are using in your custom application on the XI environment (I am assuming that you are now on an XI R3 environment) are completely up-to-date and do not conflict with any of the Crystal jar files that you were using in the CE10 environment.
To do this, please remove all of the CE10 jar files from your custom web application. Then add all of the BusinessObjects XIR3 jar files to your custom web application.
The SDK jar files for a Windows environment can be found in the following location:
<Business Objects Installation Directory>\Common\4.0\java\lib and
<Business Objects Installation Directory>\Common\4.0\java\lib\external
Additionally, if you are using the Viewers SDK, the crystal report viewer files can be found in this location:
<Business Objects Installation Directory>\Common\4.0\crystalreportviewers12
You don't need to include all of the jar files into your custom application. Depending on which SDKs you are using, the jar files that are required are different.   We have a developer's guide for the Enterprise SDK that lists the jar files that are required for the various SDKs. The developer's guide can be downloaded from the following location:
http://help.sap.com/businessobject/product_guides/boexir31SP3/en/boesdk_java_dg_12_en.zip
When you open the Developer's Guide, go to "Setting up the development environment" --> "Web application setup" --> "JAR files needed for deployment of Business Objects Software". There you will see all of the "Core JAR Files" and "Dependent JAR Files" that are required in your custom SDK web application.
You should also verify that your web.xml is set up properly for the XIR3 environment. Information on how to set this up is also including in the Developer's Guide.
I hope that after carrying out these steps that this helps to resolve the problem.
Regards.
- Robert

Crazy lag issues upgrading from OS 10.58 to OS 10.6, what gives?

I've just upgraded to OS 10.6 from OS 10.5.8 on my 3.06ghz Intel Core 2 Duo iMac and pretty much everything has slowed down considerably. I've got 4gigs and 800 mhz of memory and my computer was lightning fast running 10.5 so I'm pretty sure that's not the issue.
My main problem is that I'm no longer able to "spacebar" preview any files without extremely long lag times. Trying to preview video, music, and .PSD files takes 5 minutes to load in some cases even for a 10mb file. I'm in the process of editing over 200 video clips and this has basically prevented me from using this machine at all.
Additionally I made the mistake of deleting Quicktime 10 because the interface was horrendous and sticking with Quicktime 7 since I had already purchased a pro code for it. Even though Quicktime 7 is still on my computer all of my audio and video files are now opening in the "Grapher" utility by default, which is extremely annoying and ridiculous. How can I make Quicktime 7 my default again?
Anyone have any idea what would cause these issues and more importantly what can I do to resolve them?
Thank you!
JD

Try restarting in Safe Mode, this clears some of the caches it's possible one has become corrupted. You should also Repair Disk Permissions using Disk Utility (Applications - Utilities - Disk Utility) and I'd also recommend doing a SMC reset (maybe even 2) and reset the PRAM.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Roger

Issue upgrading from R 3.1.2 to R 3.1.3

Hi, i wanted to upgrade my system tonight,
but I am having a problem with the R package.
I currently have version 3.1.2, and an upgrade to version 3.1.3 is available.
After typing
sudo pacman -Syu
the upgrade of the packages fails with the error message:
error: failed to commit transaction (conflicting files)
r: /usr/lib/R/library/Matrix/po/fr/LC_MESSAGES/Matrix.mo exists in filesystem
r: /usr/lib/R/library/spatial/po/ko/LC_MESSAGES/R-spatial.mo exists in filesystem
Any idea how I can fix the issue?
Thanks a lot for the help,
Cheers,
Luca

Hmmm:
$ pkgfile -v Matrix.mo
extra/r 3.1.2-1 /usr/lib/R/library/Matrix/po/de/LC_MESSAGES/Matrix.mo
extra/r 3.1.2-1 /usr/lib/R/library/Matrix/po/en@quot/LC_MESSAGES/Matrix.mo
extra/r 3.1.2-1 /usr/lib/R/library/Matrix/po/pl/LC_MESSAGES/Matrix.mo
After updating package database:
$ pkgfile -v Matrix.mo
extra/r 3.1.3-1 /usr/lib/R/library/Matrix/po/de/LC_MESSAGES/Matrix.mo
extra/r 3.1.3-1 /usr/lib/R/library/Matrix/po/en@quot/LC_MESSAGES/Matrix.mo
extra/r 3.1.3-1 /usr/lib/R/library/Matrix/po/fr/LC_MESSAGES/Matrix.mo
extra/r 3.1.3-1 /usr/lib/R/library/Matrix/po/pl/LC_MESSAGES/Matrix.mo

Are there any Firefox upgrades from 2.0.0.20 for MAC OS X 10.39?

Ever since Firefox suggested upgrade to 3.6 I have been unable to reply or create new e-mail. I have an older Mac OS X 10.39 and am unable to upgrade to the Firfox version 3.6 from the existing version 2.0.0.20.

There are no updates available for you, Firefox 2.0.0.20 is the last version that works on OS X 10.3.9, later versions of Firefox require at least OS X 10.4

Issues upgrading from iOS 7.1.2 to 8.1.2 on my iPhone 5c.

I recently returned from a deployment overseas. While I was away, iOS 8 was released and I am now attempting to update my 16GB iPhone 5c from 7.1.2. I have attempted to do this via wifi which gives me an error message reading "Software Update Failed; An error occurred downloading iOS 8.1.2". When I try to update through iTunes, the update file downloads to my iMac, but when iTunes begins to install it, I get an error message that reads "The software for the iPhone 'Mark's iPhone' was corrupted during download". I've also been experiencing the same problem with my iPad 2, though I'm not as concerned about that as I don't use it much these days. Has anyone else been experiencing a similar problem? Any advice is appreciated. Thanks!

I took the device to an Apple Service Provider and they did that, restore from DFU. It worked!
Search for: Device Firmware Update

Upgrade from CS4 to CS5.5. did not go smoothly, now stuck at CS5 - how do I fix the installation?

Hi There,
I had a lot of issues upgrading from CS4 (Adobe Application Manager crashing, installer not opnening etc) but managed to get the installer to run by using the Adobe Creative Suite Cleaner Tool to remove all traces of CS4.
However, when the installer finished, it stated there were errors and now the installers won't run - nor can I run updates from the CS apps that did install.
I've normally never had any issues upgrading, so am not sure why I had so many issues and the best way forward from here - Hoping I don't have to remove all the CS5 apps, use the Adobe Creative Suite Cleaner Tool again and start from the begining.
I'm trying to install Master Collection CS5.5 on Mac OS 10.7.2
Any suggestions would be much appreciated.
Cheers
Ben

Have had to hang up as I was calling the US using a New Zealand Mobile while in Portugal (long story) - and the 11 minute wait time would've cost the same amount as the CS5.5 upgrade!
I had to call the US because:
The New Zealand support number listed on the Adobe site doesn't work
New Zealand is not listed as a country Adobe suppoprt will call back from the "Schedule a callback" page
What a joke.
I used the Adobe Support Adviser app to analyze the install error log and it provided me with a very helpful link to a support page that states "You can ignore this error and launch the products you were installing."
Unfortunately, nothing was installed.
I need to do work while a long way from home and can't use/install any CS5 apps - does anyone know how to install CS5 in Lion?
Cheers

Any issues upgrading from 1.0.2 to 1.1.2?

Similar Messages

Maybe you are looking for