Any reccomendations on a reasonable but trusty external hard drive?

I have a MacBook Pro operating on 10.7.3 (Lion). It's a few years old and starting to fade... I would like a recommendation on a portable external hard drive that's reasonably priced ($100-200) and trusty. Thanks!

http://eshop.macsales.com/shop/firewire/on-the-go

Similar Messages

  • I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks.  I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!

    I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks.  I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!

    You will need a separate partition unless you plan to use the entire drive. You will need an amount of space somewhat larger than the total space now used on your startup drive. If you select the startup drive's Desktop icon, then press COMMAND-I to open the Get Info window. Used space will be shown in the topmost panel. Add a GB or two to that number to determine how much space you'll need for the backup.
    Do not backup on a drive that has any files you want to keep. You can make a bootable backup as follows:
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility in the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • Any way to back up FAT formatted external hard drive to Time Machine?

    I'm a photographer, and right now my library of photos is a complete mess. I have about 20 GB of photos on one external hard drive and about 30 GB on my Mac's built in hard drive. I recently purchased a new external hard drive to use with Time Machine. I was under the impression that I could back up everything on my first external hard drive to my new external hard drive. Little did I know, because my first external hard drive is FAT formatted, I cannot back it up to the Time Machine hard drive.
    So my main question is this: is there any way to back up this FAT hard drive to my Time Machine hard drive? If I can't use Time Machine, do you have any other recommendations for backing up my entire photo library?
    Thank you for your help!

    A TM backup drive should be used just for TM backups. Buy another drive to use for your photo library. You can then use other backup utilities to keep it current such as:
    Backup Software Recommendations
    1. Retrospect Desktop (Commercial)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. Carbon Copy Cloner (Donationware)
    6. SuperDuper! (Commercial)
    7. Intego Personal Backup (Commercial)
    8. Data Backup (Commercial)
    9. SilverKeeper 2.0 (Freeware)
    10. MimMac (Commercial)
    11. Tri-Backup (Commercial)
    12. SyncTwoFolders (Freeware)
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
    Message was edited by: Kappy

  • Logic pro 9 keeps crashing. I get a "disc not ejected properly" message among other error messages. I can't even force quit. It makes me do the hard shutdown. Any ideas? Same problem with both external hard drives

    Getting lots of crazy error messages pertaining to the external hard drives. This problem is bad. Usually can't run the software very long at all before it crashes. Logic version 9.1.8 running on OS 10.7.5 on a Macbook Pro

    Such an error is being reported by OS X (nothing to do with Logic) and indicates that your Mac and your external drives are losing connection for some reason... There are some external drives that will incorrectly 'go to sleep' without reporting it to OS X which then thinks the drives have been unplugged without ejecting, hence the msg.
    Also, you could have a flaky physical connection somewhere.. so check ports and cables....
    So... to troubleshoot.. try the following...
    Save and place a small text file on each of the drives.. Open both text files in textedit..  and keep them open (You can minimize textedit ) Now, see if you still get that problem.. when the files are kept open.
    If you do not get this problem.. then the likelohood is it will be the HDs 'going to sleep' without proper reporting to OS X.. so check for a firmware update from the HD's manufacturer.. that will stop this from happening.
    If they still disconnect, its more likely it is a physical ports and cable issue.

  • Changing computers but not external hard drive, how to modify and delete catalogs?

    Moving my relatively new 2012 Mac Mini from office back home that has LR4 and PS CS6 installed.   It has a small LR catalog that I want to delete completely.
    Presently at home, I use my MacBook Pro which I want to take "offline" in regards to photo editing, which also has LR4 and PS installed and is attached to an external drive with all my pictures that I want to have recognized by the Mac Mini LR4.
    1) Can I just delete (from the Mac Mini) the Lightroom folder which contains the Backups folder, and the following files:  LR4 Catalog Previews.Irdata, LR 4 Catalog.Ircat, LR4 Catalog Ircat-journal, and LR4 Catalog.Ircat.lock?
    2) How do I create a new LR4 catalog on the Mini to existing picture folders on the old hard drive, which were previously associated with the MacBook Pro?

    1) Yes
    2) You don't create a new catalog in this situation; you simply move the catalog file from the MacBook Pro to the Mini, then double-click on it.

  • How come a USB will work with both Mac and Windows (as in that there are already files from Windows and Mac can still read and write onto it) but a external Hard Drive won't (as in there are files from Windows on there but Mac can read but not write)?

    I have a Seagate Drive that I'm hoping to copy some movies from my Mac onto (because it only has a 512 SSD and I'd rather keep that empty and handy for more readily needed files) but it won't work. It shows up as a drive when connected (with the orange USB drive icon popping up) and is appropirately labeled "FreeAgent Drive", but when I try to copy files onto it it won't work. There are already windows files on there, such as some windows backups and lot's and lot's of pictures and videos. However, I have several USBs which already have windows files on them (namely movies, music, and other stuff) and copying and stuff works fine. Why won't it work with this hard drive and would work with USBs? Please help me out here guys, I am not experienced with Hard disks and formatting and stuff like that. 10 points for whoever helps me out the most. Thanks.

    We will need to reformat your EXT, but it will then work on both Mac and Win
    Connect the drive to your Mac, open disk utility
    Go to the partiton tab and select '1' ... format should be ExFAT ... in options select MBR
    Format the drive
    It should now work on both OSs; report back

  • Help with using external hard drive to boot windows on PC

    Hi,
    I'm not sure if this is in the right place, so apologies in advance if not. I've looked around the internet for a good while now, and I haven't found anyone in my exact position.
    My PC's hard drive (running Windows 7) recently died; long story short, I am attempting to reinstall windows. The only other computer I have is this MacBook Pro, on which I have an .iso file of Windows 7. So I want to use my external hard drive (WD 500GB "MyBook") as a boot device so that I can install Windows onto my new internal hard drive.
    The problem I am having is that, well, nothing seems to be working. Every time I try to load the .iso onto my external hard drive and boot my PC with it, either a blank screen appears or it says "missing operating system".
    I have made sure that the BIOS is running the external hard drive as its boot priority.
    I have tried using Disk Utility to partition the external drive, then using 'Restore' to load the .iso onto the partition, to no avail.
    I have tried simply dropping the extracted .iso files onto the hard drive, this doesn't work.
    I have also tried changing the file system of the external hard drive using the 'Erase' feature (NTFS-3G (using an addon), FAT32, exFAT, all of the others), but I notice that whenever I use Restore after doing this, the file system seems to return to Mac OS Extended, which might be why it isn't booting up on my PC. Is there any way I can succesfully partition the external hard drive in a format that will allow Windows 7 to boot (such as NTFS?), and is Disk Utility even the right program to do this?
    If you want any more information from me, please let me know and I'll do my best to provide it - I'm not the most advanced mac user in the world, but I've spent days trying to fix this problem and nothing, no combination of anything, seems to work at all. So any help will be greatly appreciated!
    Thanks

    Here is a quick suggestion for you:
    Download Virtual Box (free PC Emulator for Mac) and install Windows 7 on your Mac (don't worry about activating it yet, as you don't need to keep it more than a few hours).  You can tell Virtual Box to use the ISO file as the DVD drive for your virtual Windows computer, so no need to burn a disk.
    Search Google for creating a bootable USB installer for Windows 7.  I found a link that gave good instructions on how to do this using DiskPart.
    Follow the instructions to make the bootable USB stick for installing Windows 7 using your virtual machine you created above.
    Use the USB stick to install Windows on your new PC.
    Remove the virtual Windows machine from your Mac.
    Remove Virtual Box from your Mac.
    I found a set of instructions and built an installable USB stick last night that worked great for installing Windows 7 Pro (64 bit) onto my older ThinkPad I had sitting at home.  The USB installer also installs in about half the time as a DVD install.  The only reason I have you create the virtual Windows PC is that all of the instructions for makeing the Windows install USB stick are written assuming that you already have access to a running Windows PC.  By doing this install, you have up to 3 days before you would need to activate it and you can build the installer USB stick and remove teh virtual computer long before that.

  • External hard drives are now in my dock. How to remove forever?

    For some reason, my four external hard drives and internal hard drive are now appearing in my dock. They cannot be dragged out (smoke poof), I can QUIT them and they are removed from the dock and remain on the desktop where they ought to be. But when the iMac is restarted, back to the dock they all go.
    I was cleaning my mouse and I think this is the end result, beyong a clean mouse.
    Any solutions to this situation?
    Cheers.

    Here is a screenshot of part of the Dock:
    Here is a screenshot of the Desktop:

  • I acidently erased my external hard drive (G-Tech) while reformating my GoPro. Can they restored?

    When transferring files from a GoPro camera to an external hard drive (G-Tech) I accidently erased the hard drive video imovie files. I was trying to reformat (erase) the GoPro in the Disk utilities. I clearly had the GoPro highlighted but for some reason both the external hard drive and the GoPro were erased. I had the external hard drive connected but not open or highlighted. The files were not back up on icloud or on any other device. The 1T hard drive was almost full. Can the files on the Hard Drive be restored?

    Highly unlikely.  Try one of the solutions below:
    https://discussions.apple.com/docs/DOC-1689

  • Thunderbolt external hard drives unexpectedly eject

    Aloha, This is my first post to the community and I would greatly appreciate any help.
    I run two thunderbolt external hard drives: 3 TB Seagate Backup Plus and a 2 TB LaCie lessee drive.
    For several months, both drives will eject for no apparent reason. Recently, the 3 TB Seagate drive will only periodically mount. I can feel the drive spin and a light will go on, but it does not mount. This is a partitioned drive and on one partitions is a very large Aperture library, and being able to have access to these assets is becoming a concern.
    Additionally, I have been able to get the Seagate drive to boot, but was only able to see one of its partitions. When I ran Disk Utility, the drive unexpectedly ejected.
    Steps taken to address the issue
    I have done numerous shutdowns to include unplugging the power cord from the computer, depressing the start button for 15 seconds, plugging in the power cord and waiting 30 seconds before powering up the machine, then plugging in the power cord to the hard drive, and then the thunderbolt cord to the computer, and have used two different thunderbolt cords, in addition to resetting system preferences and cleaning cachet's.
    Computer:
    27 inch iMac (three years old)
    OS 10.9.5
    3.4 GHz, Intel Core i7
    16 GB 1333 MHz DDR 3
    External Hard Drive
      Vendor Name: Seagate
      Device Name: GoFlex Desk Adapter Thunderbolt
      Route String: 3
      Firmware Version: 26.0
      Port (Upstream):
      Status: Device connected
      Link Status: 0x2
      Port Micro Firmware Version: 0.2.5
      Cable Firmware Version: 0.1.22
      Port:
      Status: No device connected
      Link Status: 0x7
      Port Micro Firmware Version: 0.2.5
    I am no expert: essentially I know enough to get into trouble. Might the issue  be the iMac thunderbolt connection, given both drives sporadically eject? or might it be the thunderbolt connector that the drive sits in, given that I can occasionally get the drive to mount?
    Any and all thoughts are greatly appreciated!
    Mahalo nui loa (Thank you very much)

    Aloha,
    It was a long week. Here is an update.
    Had the opportunity to go to the Apple Store yesterday and purchase new thunderbolt cables, and hooked everything up this morning.
    I disconnected the Seagate drive from the sled, and brushed the contacts.
    The Seagate hard drive did not boot on my iMac and Disk Utility could not see it. That said, when booted to my wife's iMac, Disk Utility could see the drive, but I could not verify or repair it. The data from my wife's iMac is attached.
    Also, I tried to run Data Rescue 4. It would not see the drive. I do have Disk Warrior, if that is a reasonable option to try.
    Additionally, the LaCie (now connected to my iMac with a new thunderbolt cable) has not yet been ejected. The computer has gone to sleep several times and I have awakened it.
    I very much appreciate your thoughts and time, And I look forward to your thoughts, To include any experience in getting the data off of the Seagate. It contains seven years worth of photographs, which I would hate to lose. I also got the message about redundant backups. There may be some of the backup in Crash Plan.
    Mahalo nui loa
    WRL

  • Time Machine back up made from an external hard drive

    Hi...to all
    Last week i bought a Macbook. I pluged in my external hard drive Maxtor OneTOuch 4 Plus and it did a time machine backup on the Maxtor OneTOuch 4 Plus. The folder that was generated by the time machine on my external hard drive has the name backups.backupdb.
    Then, i decided to return the Macbook and bought a Macbook Pro.
    When I pluged the same external hard drive, Maxtor OneTOuch 4 Plus, although I am able to access and open individual files and folders, I am not able to copy neither any nor all the folders from my external hard drive to my new Macbook Pro. Moreover, I am able to access/open the files located in my external hard drive but when try to copy specific files from this drive to my Macbook Pro I get the following error message: Sorry the operation could not be completed because an unexpected error ocurred (Error code -50). Now, here is where it gets interesting: after 2 failed attempts to copy files from my external hard drive to my Macbook Pro desktop and receiving the above error message I am then able to copy the specific file (singular). This would mean that to copy the files and folders in the external hard drive i would need to do it on a one by one basis? If so, it would take forever...
    Can someone please kindly help out.
    Thanks on advance

    Hi Sunny Beach 1024;
    Since your question deals primary with Time Machine, you might get more results if you post over in the Time Machine Forum.
    Allan

  • How do i transfer my itunes library onto my new computer, when on the old computer I have all the songs saved onto an external hard drive, which I still wish to use?

    At the moment on my old latop I have an external hard drive with all my songs on.  I need to attach the hard drive before the songs will play.  Any new songs are downloaded onto the external hard drive.
    How can I get the same set up on my new laptop?

    When I have held the shift key down & clicked on the iTunes library that was shown on the external hard drive, it has loaded most of the older albums, however there are several albums which have not appeared on iTunes on the new laptop, but if you go into explorer and look at the folders/files on the hard drive, they do appear on the external hard drive.
    I have also noticed my play lists and genres have not shown as they were on the old laptop.
    Is there any way of getting a complete copy of all songs, play lists, etc. so that is does not require to hold files in two difference places, I would prefer if all the files were on the external hard drive, so I do not fill the internal hard drive with songs?

  • External Hard Drive can't be opened and alias cannot be deleted or fixed

    I've just got a new iMac with Snow Leopard, but my external hard drive won't open.
    1. I have the message *"The alias XXX can't be opened because the original item can't be found"* with the options to delete the alias, fix the alias or OK. I can't delete or fix the alias.
    2. I can see the disk on the Disk Utility, and can verify and repair the disk (which I have done), but cannot verify or repair the Disk Permissions
    3. I can see from get info that of the 1TB capacity, 511GB is used - therefore the files are still on it. I have tried to select new original but am unable to so do as this disk is greyed out in the finder. I have also selected ignore ownership on this volume.
    Any suggestions so I can open the external hard drive, or fix the alias?
    Thanks
    Bill

    Thanks Dave - I tried that but what happened was that the disk, which was in the left hand finder winder with the other devices turned into a cloud and disappeared when I dragged it out of the finder window.
    Any other suggestions? I am keen to be reunited with the files on the external drive
    Thanks
    Bill

  • External hard drives randomly marked as read only

    I have a few External Hard drives (the two I care about the most are Seagate brand and fairly new).  Both of them have been set up for Mac use only and never gave me any issues on my older Mac and were used frequently.  I just recently got a new Mac.  I hooked up my hard drives, denied the Time Machine pop-up, and copy my work onto my new computer.  Though I was able to copy my work to my new computer, I couldn't move files on my external hard drive anymore nor could I add new files (back-up work) to the hard drive.  Not sure if it's just the new computer or rejecting the time machine pop-up, but my external hard drives can no longer back up my work.
    Anyone know what the issue is here?  I browsed these forums for a bit and it seems like the common solution is to unlock it or repair the disk.  Both task I am very familiar with; however, I don't get the option.  There is no lock icon for me to click to unlock and repair the disk (as well as all other options in the disk utilities) is greyed out for the external hard drives.  If anyone knows whats going on here, I'd greatly appreciate it. Thanks!

    machumpo wrote:
    Not too thrilled that it is going to wipe the hard drive (and I prefer to avoid third party when possible), but I will give it a shot. 
    What you can do is use another external drive formatted to your requirements and copy the data from your current one to it.  Then do the reformat.  Also if you have the space on your MBP internal drive, copy the drive data to it, format the drive and recopy the data back to the reformatted drive.
    Any chance you know how my external hard drives magically changed formats?
    I cannot assist you there.
    Ciao.

  • IMac 10.5.8 is stuck on Apple logo loading screen , how can I back up my files with an external hard drive ?

    so my iMac (10.5.8 its pretty old ) got stuck on the apple logo loading screen (as I call it lol) and it will not go beyond that .I've already made and appointment for the genius bar but now would I back up my files with an external hard drive ? No unfortunately I don't have any other laptop or computer just the external hard drive. how would I back it up? Does it have something to do with "target disc mode"?

    Hi,
    Thank you for great advice re SuperDuper.
    You wasnt to know we didnt live in  USA.  We will try to get the full retail version of Leopard off the net.  We will also phone round the apple resellers.
    In the meantime, we are happy running Tiger with the knowledge that SuperDuper has cloned our hard drive in case of a disaster.
    SuperDuper recommended backing up the hard drive with a new user account if we were using filevault on the master account.  We backed up our hard drive without creating a new user with filevault as we could not read the pdf `Instuctions as preview was not responding.
    Is this copy safe to use as a bootable drive or should we copy our entire HD again using a new user account without filevault?
    Keith & Shem  

Maybe you are looking for