Any Ticks for Audigy 2 on windows 8.1 x64

Hi I ve tried everything and nothing , I just upgrade from 8 to 8.1 the windows start to crash.
I have tried kx project , daniels driver support 5.3 and sometimes finish and other crash installing the driver audio. without signing on safe move and nothing.
Any help or hint ?

Originally Posted by FTech
If you can state your system specs. Like the type of motherboard, how much RAM, hard drive(s) and/or solid state drive(s), video card, etc. We have no idea what kind of system you have.
You state the upgrade from Windows 8 to 8.1 that windows start to crash. Before you performed the upgrade, did your Audigy 2 card work?
How did you upgrade to Windows 8.1... from Windows Update or by some other means?
If Windows 8.1 is crashing, you have other bigger issues to deal with. You need to have a good working operating system before you can deal with your Audigy 2 issue. Just uninstall ALL the Audigy 2 drivers, those Kx, daniels, ALL of it. Uninstall everything related to your Sound Card. Then reboot your PC.
According to https://www.microsoft.com/en-ca/wind...=Windows%208.1 your card is compatible with Windows 8.1 Just download those drivers EVEN THOUGH it's not stated for Windows 8.1
Make sure you uninstall all those Creative drivers and related software from your PC then REBOOT.
Good Luck
thanks for your answer it's a clean install of Win 8.1 PRO enterprise x64
some information about the configuration.
Before the upgrade it was working good with W8, with the original drivers from creative.
Creative Sound Blaster Audigy series driver 2.18.0017
Pc:
RAM 12 GB
CPU I7 4970K
MB ASUS A-97
GPU ASUS GF GTX750 TI
SSD 1T SAMSUSUNg EVO
Basically it crash when I try to install the audio drivers, daniel's, original etc. or manually on the setup information file (right click install..) First time Daniels drivers work perfectly but after some minutes it crashed ...( inclusive the remote control works rm1500 for the drive with audio digital inputs outputs)
the comment from daniels about the killdrv.exe is necessary to use cause it crashed after some seconds , otherwise I need enter in safe mode and uninstall) the problem is at at the end , Daniels comment says run killdrv.exe and uninstall all or the audio drivers, and you have nothing without the driver installed.
Well I 'll try again from Zero first installing the sound Card , I Usually start with the drivers of video, network, and then audio

Similar Messages

  • Issues with mixer etc for Audigy SE in Windows 7 64bit

    My system is currently Windows 7 Home Premium 64bit and I have just installed the SB Audigy SE PCI card.
    I have uninstalled the onboard sound software and disabled the onboard sound in the BIOS.
    I have disabled all audio devices showing in the sound/playback devices.
    I am hearing audio fine on the system but there are issues I would like to try and resolve. When I attempt to launch the applet to control the mixer, select speaker config etc I receive an error stating that the hardware that the application supports is not found.
    I have downloaded the latest software and run the auto update to be sure that this is the case. I have attempted to run the applets from the installed folders to see if that would help. I have set admin privledges for the applets and even attempted to run in compatibility mode for Windows XP SP3. None of this hel
    ps.
    I have searched the forums and found several threads that list the error, but the posts I found were either not for this card/windows version or not answered. All of the threads found were at least several months old. I am familiar with working in the BIOS, working in the registry and with hardware troubleshooting.
    I would like to get these working as the sounds are not quite to my liking with the current config. I do not do any audio editing, but I use my system extensi'vely for audio playback and for gaming.
    Thank you in advance.

    here, it's the application which i boxed in green;
    http://img99.imageshack.us/img99/2382/unledign.jpg?
    please note the requirements which tells that application(BasicAudio Suite) doesnt supports win7 either 32/64bit.
    trust me, i tried that with my XP SP3 and it game me troubles either. by reverting my XP SP2 made it work cuz it tells supports only XP SP2.
    we need that application so that we can tweak more with the audio like; equalizer, diffrent soundfields etc... yeah, there was a big difference when we can tweak it more specially with the equalizers. better bass, treble and everything.
    so there's no way we can fix/access that when we are into win 7, Alchemy has nothing to do with it btw... i have it either.
    for now our tweaking would be limited with this; ( Creative Audio Control Panel which you could find at the Start menu button)
    http://img98.imageshack.us/img98/42/unledvy.png?
    adjust that slider according to your liking, mostly it just adds/reduce the echoes with the audio as far i had observed.

  • Any sulutions for audigy 2 issues(setup could not detect the card at my pc)

    i've looked for so long for a propper solution but i did not find anything usefull.
    first i've downloaded the drivers and try to install them with no success.
    second, i tried with the original cd, again no success.
    iv'e moved the card to a diffrent slot , still nothing, always the same info when trying to install.
    iv'e looked some here but there are a lot of threads about audigy, it will take a couple of years to look into all of them
    i'm using win xp, my p.c is kind of new( year old), gigabite dsl motherbord if it matters.
    even tried before a long time to contact your support, its a shame for this company, no single answear from you(even the other time i tried to contact you about my speakers).
    hope that someone here can give an idea/s what else i can do with this.
    thanks in advance
    p.s
    creative support/management its about time to treat your custumers or close this company, you have a lot of issues and you have zero support, your loss...

    Okay I ended up fixing this problem myself seeing as a lot of these forum topics just come to a dead end with no real resolution.
    Let's get 'Creative' ...
    I removed the reg entry hkey_local_machine/software/creative tech, removed all drivers, programs, and anything that even smelt faintly of creative.
    Just to make sure I ran the CTZAPXX.exe on the cd and removed drivers again there also.
    Then upon a swift reboot I used CTZAPXX.exe to install the drivers, ran the cd, unchecking the option at the bottom of the 'custom' install list to install windows drivers (as it had already been done)
    Now I'm back in business
    Though, all through the ages I've never had a creative soundcard, which hasn't given me trouble at some stage, man I even have shameful memories of my AWE64... Lift your game creative, you've got a great product line, just a pity the shoddy drivers sometimes let them down.
    This post may be a little outdated, but it's really intended for all you googlers out there I really hope this fixes your problem!

  • HP does not show any drivers for my P1006 under windows 10

    My Laserjet P1006 will not work now that I am using windows 10. HP does not show that they have new drivers for my P1006. Will HP be coming out with new drivers.

    Hi,Drivers should beocme available for Windows 10, as you may find listed below:http://support.hp.com/us-en/document/c04658195 In the meantime connect the printer and try following the HP Printer Install Wizard, it may detect a compatible driver for yoru printer:http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e016-1&h_keyword=dg-PIW If that fails you may also try installing the Windows 8.1 drivers, there are good chances those will work on Windows 10:http://ftp.hp.com/pub/softlib/software12/COL21058/bi-55362-7/ljP1000_P1500-HB-pnp-win64-en.exe Regards,Shlomi

  • Any options for using Captivate on Windows 2003?

    I am new to Captivate but I must get a demo done by Friday. I
    installed on Windows 2003 where the software I am demo-ing is
    installed. Now I find that 2003 is not supported. Can anyone
    suggest (quickly!) how I can use Captivate to do my demo?
    I am not savvy at all with demo software, so please be
    specific. Thank you!
    Janise

    Hi again Janise
    Yes, as long as you can display what you need on the XP
    desktop, you should be good to go.
    Keep in mind that your best result will likely be obtained by
    creating the voiceover as a separate process and not while you are
    recording the initial movie.
    Also, you may discover that the remote destop won't paint
    quite fast enough so Captivate will record "blank screens" here and
    there. Where you notice this happening, press the Print Screen key
    to force additional screen captures. It's always easier to delete
    unwanted slides than it is to re-create them when needed.
    Cheers... Rick

  • X201 Tablet: Drivers not working for Network controller on Windows 7 Pro x64

    Hello,
    After downloading and installing all LAN and WLAN drivers for X201 Tablet, I couldn't find one that works on Windows 7 x64.
    How can I proceed?
    Thank you in advance
    Solved!
    Go to Solution.

    I fixed it by downloading this drivers:
    https://downloadcenter.intel.com/download/18713/Network-Adapter-Driver-for-Windows-7-
    And after installing them and restarting, searching for them manually from the Device Manager.
    Cheers

  • What databse I have to install for SOA11g installation on Windows platform

    Hi,
    I want to install SOA11g on my Windows laptop. I have installed 10g XE (10.2.0.1) database. But when I tried to create the Dehyderation store using RCU tool, the error I got is like, the datasbase version will not support for this installation, however its asking to upgrade it to 10.2.0.4 version. But I didn't find any patch for XE database on windows to upgrade to the required version.
    I also tried to install the 11g enterprise database, but I am not able to succede. There I have faced one issue, that using RCU tool I am not able to connect the database as a SYSDBA. So I have dropped this DB and shifted to XE. Now I have stuck with XE version problem.
    Is there anybody who installed the SOA11g on the windows platform per personal usage? If so please guide me.
    -- Khaleel

    Hi,
    I have followed the steps in http://sriki77.blogspot.com/2008/11/oracle-xe-processes-parameter.html
    Changed as follows:
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Oct 26 21:07:45 2009
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> conn sys as sysdba
    Enter password:
    Connected.
    SQL> show parameter processes
    NAME TYPE VALUE
    aq_tm_processes integer 0
    db_writer_processes integer 1
    gcs_server_processes integer 0
    job_queue_processes integer 4
    log_archive_max_processes integer 2
    processes integer 40
    SQL> alter system set processes=500 scope=spfile
    2 ;
    System altered.
    SQL> show parameter processes
    NAME TYPE VALUE
    aq_tm_processes integer 0
    db_writer_processes integer 1
    gcs_server_processes integer 0
    job_queue_processes integer 4
    log_archive_max_processes integer 2
    processes integer 40
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup
    ORACLE instance started.
    Total System Global Area 599785472 bytes
    Fixed Size 1288820 bytes
    Variable Size 167773580 bytes
    Database Buffers 427819008 bytes
    Redo Buffers 2904064 bytes
    Database mounted.
    Database opened.
    SQL> show parameters processes
    NAME TYPE VALUE
    aq_tm_processes integer 0
    db_writer_processes integer 1
    gcs_server_processes integer 0
    job_queue_processes integer 4
    log_archive_max_processes integer 2
    processes integer 500
    SQL>
    After this I got some more errors , I have ignored them aswell. (One I remembered is open_cursors limit was 300 suppose to be 500).
    Finally I have created the entire schemas except the PORTAL CONFIGURATION everything is successful.
    Thank you.
    -- Khaleel

  • I've been out of the loop - is there any hope for my Audigy 2 in Vis

    Are they going to eventually come out with drivers that will make my Audigy 2 ZS Plat Pro fully functional again, so I can use all the ports and features again? Or are they going with X-Fi only now?
    It would be a shame if I spent over $300 for a soundcard that would not even work with future versions of Windows
    edit: Also, I'm running the Mar 07 driver pack off Creative's site. If you guys have any recommendations for any unofficial driver packs or anything to unlock more ability out of my soundcard, that'd be great. Thanks!

    Yes. There is.
    Step 1: Follow these instructions > http://nomoregoatsoup.wordpress.com/...tall-problems/
    I recommend the Manual instructions. Driver Sweeper might not get it all because Vista will try to hold on to those files for dear life.
    Step 2: Download the latest Drivers from here > http://forums.creative.com/creativel...essage.id=2700
    They are not official releases but its just as good, if not, better than anything Creative has put out on its own.

  • Any fix for touch pad issue in mac book pro on windows 7?

    Hi, I've recently installed windows 7 and parallels in my mac book pro. While i run windows with the parallels track pad, scrolling and right click are functioning properly. But when i logon to windows directly none of them are functioning.
    Pls lemme know if there is any fix for this.
    Thanks

    KiranJJ wrote:
    Running Windows in parallels from the BootCamp partition messes the original installation. My experience. You will have to remove the parallels virtual machine from mac and did a complete reinstall of Windows later.It is better to keep your virtual machine separately.
    This is not true. Running Bootcamped Windows from Parallels or Fusion does not impact the Bootcamp installation of Windows. It just provides a different access to the single Windows installation. Both Parallels and Fusion support this configuration and instructions for how to use Bootcamped Windows as the virtual machine's tartget operating system is included on each virtual machines's respective site.

  • I followed the instructions on the Web site to uninstall Photo shop elements 12 in windows 8.1 and when I did as it said there was no box to tick for deactivation so I carried on.. How do I go about reinstalling on another computer

    I followed the instructions on the Web site to uninstall Photo shop elements 12 in windows 8.1 and when I did as it said there was no box to tick for deactivation so I carried on..  Can I just go ahead and install on another computer ?

    I don't know what instructions you may have followed, but as long as you "signed out" , then you will be fine.

  • My MacBook Pro keeps logging me off my account, and I checked my system preferences to see if any boxes were ticked for "log out time" or "password required" and they are not. Why does it do this?

    Any help would be greatly appreciated

    Nicksea is correct and most of the posts on this subject in these forums have missed this vital explanation.
    I have just been through a big problem similar to this but mine was shutting down after 40mins.
    The reason I said "big" was that I have had the problem when doing large downloads and then having to restart them again only to have it happen again. I had spoken to AppleCare and for more than a year the issue was not resolved.
    I was told to take my computer the local 'MacDoctors' and they said they thought it was the Hard Drive and replaced it and then charged me to transfer my data. The data transfer was mucked up (if you don't know what Mucked Up means replace the 'M' with a 'F' and you'll get it) causing more trouble.
    It didn't fix the problem but it did mean I couldn't go for a Macca's for a month (kidding - I still went to Maccas but didn't order fries).
    Anyway, finally, in desperation and much frustration I thought I would give the Apple Care guys another go and got an 'escalation' guy that really took charge of the problem. He didn't know what to do to fix it but was talking about it to one of his fellow super techosleuths and his friend asked has he looked at the 'Security and Privacy' option in the System Preferences?
    Inside that option is an 'Advance' option (OSX 10.7.5) and once opened has a tick box which asks when you want your computer to shut down. Sure enough it was ticked for 40mins - it is now unticked.
    I have mentioned this to Applecare people and the MacDoctors and NONE of them had any idea that this tick box was in that section of the system.
    Computer shutting down?..... check it out.

  • The selected driver is not applicable to any supported platforms. 2012 R2 U1 for Windows 8.1 x64

    When trying to import the drivers from the Windows 8.1 x64 Dell E6330 SCCM CAB to our SCCM 2012 R2 U1 server, we receive the error "The selected driver is not applicable to any supported platforms" on a number of drivers.
    Specifying the same source directory to the test Windows 8.1 Ent x64 computer via the install driver wizard in Device manager finds and installs the missing drivers successfully (Bluetooth 4.0 Module and STMicroelectronics 3-axis Digital Accelerometer). 
    The manufacturer section of those drivers looks like this:
    bcbturms-win8x64-brcm.inf
    [Manufacturer]
    %MfgName%=Broadcom, NTamd64.6.3, NTamd64
    st_accel.inf
    [Manufacturer]
    %STM%=ST,NTAMD64
    Any idea how I can successfully import these drivers?

    Thanks for the suggestion, but the results are the same. The Grabber runs without error, but the injector errors with "Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error." So I attempted to import the drivers from the
    injector's configured drivers source folder and received the exact same error I receive when attempting to import them from the Dell cab.
    Relavent part of the DirverInjector log below:
    <![LOG[Starting drivers import processs]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.IntegrateDrivers" context="" type="1" thread="" file=""
    <![LOG[Current folder : Bluetooth]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
    <![LOG[Current subfolder : Dell Wireless 380 Bluetooth 4.0 Module]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
    <![LOG[INF file found : oem14.inf]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
    <![LOG[Driver version found : 12.0.0.7820]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
    <![LOG[Checking driver existence]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
    <![LOG[Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error.]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.CheckIfDriverExists" context="" type="3" thread="" file=""
    <![LOG[Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error.]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.CheckIfDriverExists" context="" type="3" thread="" file=""
    <![LOG[Checking driver existence]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
    <![LOG[Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error.]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.CheckIfDriverExists" context="" type="3" thread="" file=""
    <![LOG[Driver not foud, a problem occurred during the import process]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="2" thread="" file=""
    <![LOG[End of driver is import process]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""

  • Having corrected my corrupt catalog (PSE 11) I now have thousands of duplicate images. Is there any way of of removing the extra copies? I've had suggestions that apply to Windows, and iPhoto but can't find any advice for Photoshop Elements on Mac Maveric

    Having corrected my corrupt catalog (PSE 11) I now have thousands of duplicate images. Is there any way of of removing the extra copies? I've had suggestions that apply to Windows, and iPhoto but can't find any advice for Photoshop Elements on Mac Maverick

    You used the data.  Verizon can not see what it was sued for.  However your phone can see whats apps used the data.  go to settings-data usage- there will be a place that says data usage cycle.  line the dates up with your cycle.  then there will be a bar graph below that   extend bother white bars one all the way to the left and one all the way to the right.  after those are extended below that will be a list of apps,  there should be one that used over 2 gb and that will show you what app used that data in her purse

  • I have several Files created in Logic Audio for windows bfreo v 5 wich  can't open in Logic Pro X. Any ideas for a solution to his problem,

    I have several Files created in Logic Audio for windows before v5.5.1 which  can't open in Logic Pro X. Any ideas for a solution to this problem, The Windows files that were created in v5.5.1 open OK.  I lost my XS key during a recent house move so can't update to windows files before trying to open in Logic Pro X
    Swingtones

    If you can open the windows files  in windows you can bounce the tracks out as audio. Then load them in X

  • Ihave downloaded icloud for the pc. Windows 7 on my pc will not let me open the setup program.  The error message tells me to contact the program provider which is Apple.  Apple has not helped.  Any suggestions?

    I have downloaded icloud for the pc.  Windows 7 on my pc will not let me open the setup.  I get an error message: contact the program provider which is apple and they have of no help.  Any suggestions?

    Start by telling us the whole message, exactly.

Maybe you are looking for