Any way to create an iMovie Stereo Mix?

I've created a project with split audio tracks, when I exported it to my camera using imovie 4 it would mix the tracks, no with five it keeps them separate. Any way to mix down the two tracks to create a stereo mix or at least a mono mix of the two tracks?
Thanks for your help!

Hi David,
There ara a number of ways around this . perhaps the 1st one to try is 'Share" from the pull down menu>Quicktime>Expert Settings>Share>Sound to AIFF Options>Linear,mono or stereo AIFF at48kHz16 bit Go!
How long is the track. Could take a while...
2. If you have Final Cut , you have more control on output including outputing as mono.
3. Sound Studio http://www.macupdate.com/info.php/id/4811
will give plenty of features for a limited time so you can get it done.
Mark

Similar Messages

  • ACS 5.3 Dashboard - Any way to create Dashboard for all users?

    I'm at the point of setting up admin access for engineers needing to have insight into the operations and status of our ACS 5.3 systems.
    I'm curious if there's any way to create a Dashboard that can be applied to all admin user accounts? (perhaps a custom role?)
    I've been able to customize the dashboard for my own account to show what is most relevant, but am unable to figure out how to apply this layout and setup to all other users.
    Basically, I have a number of folks that need to see this data, but that I can't exactly count on to setup their own dashboards to show the important details.  If there were some way to build a tab/dashboard/portlet, etc (whatver it may be) and have it apply to all users, that would save me TONS of work so that I don't have to login to each person's account and set things up for them.
    For example, I want to have all users see a tab/dashboard that shows the applet "Live Authentications", but with the protocol already configured to display TACACS vs the default which is RADIUS.
    Any thoughts?
    -Chris

    Chris,
    I see you are looking for read-only access to Dashboard. Currently there is no way to force all Admins to use same Dashboard and all admins will have full control of the Dashboard.
    Regards,
    ~JG
    Do rate helpful posts!

  • Is there any way to create a VMvmare server cluster?

    Hi,
    I have two machines which don't support install ESXi, these machines are running centos 5 with no X and I installed vmware server 2.0.
    My question is, is there any way to create a vmware server cluster like is possible create in ESX?
    I know in ESX once you create a cluster, the resources are increased since resources are added. Is there any way to do same thing with vmware server 2.0?
    Also is there any other option for my machines, I don't want to install X since the machines don't have much resource.
    Thanks in advance.

    Welcome to the COmmunit - With VMware server each environment functions independently and there is no way to pool resources as you can with a DRS cluster - and remembering even in a DRS cluster the VMs swill only run on a single host at a time as they would in VMware Server machines/
    Also just because it is not suppported does not mean you will not be able to create a VM with an unsupported OS -

  • Is there any way to create a transcript document of the audio within a course?

    I have a course that someone else created that contains audio and would like to know if there is any way to create a "storyboard" of the audio so the SMEs can edit it instead of sending an EXE file for review or having to recreate the transcrip from scratch.

    I generally just have the transcript for my voiceover audio in the Slide Notes field for each slide, and then output my project to a Word document handout, making sure to select the option for slide objects and slide notes.  That creates a PPT-like handout that is easy to email to approvers.  They can see the transcript notes underneath each slide graphic.

  • Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?

    Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?  I have created an executable application that I want to distribute to Mac and Linux users (different applications were created in the respective OS).  I was wondering if there is any way to create an installer?  I think there probably isn't...  If the user were to simply download the Labview Run-time Engine from ni.com would they be able to run the application or is it more complicated than that?
    Thanks so much for your time.

    I think Shane tried to say, that it is on the Mac OS X installation DVD, NOT the LabVIEW for Mac OS X installation medium. And that could very well have changed in recent Mac OS X versions as well. They used to have Xcode on it too, but that seems gone as well.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Is there any way to create admin role only for one resource.

    Hi all,
    I am trying to create an admin role with 'update user' capability. But I want to restrict the user(with the admin role) to be able to update a user's attribute only for one resource, The user(with the admin role) should not be able to update the attributes of the other resources which a user have.
    Is there any way to create admin role only for one resource?
    I customized the tabbed user form to show only one resource attribute (deleting the missing fields and adding my tab for the resource) and then assigned this new User Form to the user(with the admin role) in security tab.
    It works fine. But the problem is that if any user(with the admin role) is also admin of some other resource then he/she will not be able to view the other resource attributes.
    Please suggest,
    thanks

    The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

  • Is there any way to create a wifi hotspot for my macbook using my IPad?, Is there any way to create a wifi hotspot for my macbook using my IPad?

    I am going to a lake cabin in Northern Minnesota for a week and need to get wifi for my Mac.  Is there any way to create a wifi hotspot using my Ipad so that I have internet service for my laptop?

    No, iPad can become a hot spot, but if you have an iPhone, it can tether if you have a data plan that incudes the tethering option.  With AT&T for example, you can add tethering for $20 month or for $45/month, you receive tethering and 4GB of data per month.  If you have the unlimited data plan from AT&T you'll unfortunately have to give it up if you want to tether.  You can also go to almost any carrier and purchase a MiFi unit which may work for you.  Whether iw will work in Northern Minnesota is something only your carrier could answer.

  • Is there any way to create a system-wide variable?

    Hello IDM gurus.
    Is there any way to create rarely changing system wide variables that can be loaded at system startup that will be available to all users? For example, at IDM system startup, the variables would be read from configuration or generic objects and live in memory for ALL users as opposed to each workflow/user having to read the same variables when the workflow is run.
    Any help would be appreciated.

    That may very well be the answer I'm looking for. Is there a way for that to be available within the entire application instead of having to read it in each workflow?

  • Is there any way  to create table  of more than 30 char length name

    hi all,
    Please tell me is there any way to create table of more than 30 char length name in oracle 10g
    Regards

    Hi,
    If you want table name to be more than 30 Char.
    I am sure,your naming convention is not upto the mark.
    Its not possible in 10g as well as in 11g.
    Thanks
    Yogesh Nagle
    India

  • Is there any way to create discussion board using JSP

    Hi! i'm doing a project using jsp is there any way to create a simple discussion board like the one here? can anyone who knows pls forward some links that teaches me how to do it step by step. Thanks for your help and have a nice day :)

    From the UK! -- PC Plus, August 2000 Issue:
    How to build a JSP Message Board
    http://www.pcplus.co.uk/media/pcplus/pdf/166/pcplus.166.progworld.java.pdf
    You'll get a nice 2-page pdf file, taken directly from the magazine
    --Dave                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Is there any way to create fields reports users can enter data into?

    I am using Crystal XI to develop reports for my company and have not received any formal training on it.  I'm learning it fairly well through the help files. 
    One of the reports I need to create summarizes our scrap, rework, and additional incurred expenses for our monthly quality reports.  Most of the information is stored in the main program used by all employees, a very small amount of it is not.  I have created sub-reports for each of the different types of costs that are tracked in the system.
    Is there any way to create an area on the report that our QA people can use to enter the items not tracked in the main system?  I am imagining that it would be through another sub-report of some kind, but do not know how to create the fields needed. 
    Thank you very much for any assistance you can provide, even if it is to tell me "You can't do that, ma'am..."  At least then I would know and wouldn't beat my head against the desk trying to figure out how to do it.

    Is defining parameter prompts in the Crystal Report and displaying it in the report a possible workaround? 
    If you define parameter prompts, then Crystal will query the user before running the report - so this would be problematic if the user needs to reference data in the report to enter appropriate values (one possibility then is to use interactive parameters feature available in CR 2008).
    Sincerely,
    Ted Ueda

  • Is there any way to create 3D PDF file without having the model tree ?

    Is there any way to create 3D PDF file without having the model tree ?
    3D communication is good but sometime we don't want the receiver to be able to study every components in model.
    or any way to make the receiver cannot use model tree and measurement tool ????
    Thank you very much

    You can remove the assembly tree by doing a roundtrip in 3D Toolkit, here's how:
    - start Acrobat 3D
    - drag & drop a CAD file
    - click on 3D Annot to activate
    - right-click on 3D
    - select 'Edit in 3D Toolkit'
    - 3D Toolkit launches
    - click in 'Scene Tree' panel
    - right-click on top assembly name
    - select 'Tools->Collapse Hierarchy'
    - select 'File->Save'
    - select 'File->Exit'

  • Is there any way, to create with Adobe Muse HTML-Mail Templates?

    Is there any way, to create with Adobe Muse HTML-Mail Templates? or to convert the createt page to only html content? any other tool like an website copyer?
    tanks for help!

    Off the top of my head, you should be able to create mail templates in muse BUT it will require  very basic html/css knowledge on your part. I am assuming you want to do just the signature?
    Create the design you would like on one page, dont do any kind of styling in a master page. Then export the site into a folder. Open the html file with notepad/ textedit and then copy just the code for JUST the template. Throw it in you mail app of choice and it should work.
    This seems like something that would be done alot quicker in dreamweaver in design view.
    PLEASE NOTE: ^i could be completely wrong - but in theory this may work.

  • Is there any way to create a reminder for "today"?

    Is there any way to create a reminder for "today" in the new Reminders app? I used to be able to pull up the "today" list and add things that would go to my default list but automatically show up for today but now it looks as though that option is gone.  Additionally, any way to get dates/times to show up with reminders in the Notification Center?

    Hey chewie314,
    Thanks for the question. From the information you provided, it sounds like you might be looking for the "Scheduled" view. This view will show all of your reminders that are scheduled in a list. To access the schedule view, click the icon:
    Reminders - iPhone User Guide
    http://help.apple.com/iphone/7/#/iph88463e18
    Thanks,
    Matt M.

  • Is there any way to create a file compatible with Premiere Pro

    Is there any way to create a file in Premiere elements that is compatible with Premiere Pro and that can be used in Premiere Pro

    Consternation
    The important information that I do not see mentioned nor offered by you.
    1.What version of Premiere Elements are you using and on what computer operating system it is running? What version of Premiere Pro do you want to use?
    The Premiere Pro Import Supported Formats seem to indicate that it will accept the Premiere Elements project.prel (project file) on Windows Only.
    Adobe Premiere Pro Help | Supported file formats
    This may or may not be possible depending on damaged projects or outdated elements.
    2. If you want to export your Premiere Elements Timeline to a file saved to the computer hard drive and subsequently import that into your Premiere Pro version, that "should" work. You would go to the Premiere Elements Publish+Share/Computer/ and make a selection based on what the Premiere Pro Import Supported file formats are and what you need. I can help you with that. But, details first.
    But, just a "beware"...when you get to Premiere Elements 11 or 12 (if that is the version involved) Publish+Share/Computer/ there are several categories, but all you see is Adobe Flash Video, MPEG, and AVCHD. The rest of the list that includes AVI and QuickTime which both need to be scrolled to all of the time to see them, not just sometimes, with the thin scroll bar to the right of the list of choices. You can export files
    with AVI file extension, under Publish+Share/Computer/AVI
    with MOV file extension, under Publish + Share/Computer/QuickTime
    And, if you do not have QuickTime installed on your computer with Premiere Elements, you are not going to have presets for the QuickTime export.
    Remember, there is more to an export than just its file extension. Know your other export properties as well.
    In many cases, you can customize the export settings to suit your requirements.
    Problems will exist if you are trying to go from Premiere Elements Windows to Premiere Pro Mac or vice versa.
    I would be glad for the opportunity to help you with this issue, but details are needed.
    Looking forward to your follow up.
    Thanks.
    ATR

Maybe you are looking for