Any way to export single tracks (with no extra space) or only highlighted bits?

I need to be able to record several hundred small (<1 second) sound bytes and I am trying to use garage band. Obviously that's not what it's made for but I can't find any other software that could even come close to doing the job.
I tried just recording everything all at once and then splitting it up and exporting individual highlighted parts but it can't do that.
Then I tried putting each piece on an individual track and exporting that, but it ends up with a 1 second clip and 15 minutes of silence.
I tried exporting the whole thing to iTunes, converting to an MP3, and then editing the start and stop points and then reconverting to an MP3, but there's no way to indicate start times of a fraction of a second and my sound bytes aren't always exactly inside a second marker.
Is there any good way to do this in Garage Band? If not, is there a program that will do it? Thanks!

Maber wrote:
 Is there any good way to do this in Garage Band?
http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)
Maber wrote:
 is there a program that will do it?
an audio editor:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

  • Best Way to Export Single Tracks in Audition

    Hello,
    What is the best way to export one single track (stereo or 5.1) from a multiple track mix in the Multitrack Editor if I want to make it mono? Is it by just muting the tracks I don´t want in the final mixdown and then selecting a mono Master in the Mixdown Options box?
    What about exporting only a few of the tracks from a multiple track mix to one mono file? Same process?
    Thanks!

    "Export all Tracks as Audio Files" found under File>Export.
    This will render audio files of your software instruments that start at bar 1, beat 1, and can be dragged right into Pro Tools. The export happens "pre-fader", so it is bounced at unity gain, and excludes any automation.
    If there is automation that needs to be included (like a filter sweep or something like that), you'll need to solo the track, and bounce it, because a bounced file does include automation.
    Also, if you're using a multi-channel instrument, you'll need to bounce those tracks separately as well.

  • Exporting Single Tracks

    Is there an easy way to export single tracks -- instead of the whole song -- to disk? I want to be able to take individual tracks out of a song with lots of tracks, export them to disk, and then email them to a friend for him to work with.

    David Holdeman wrote:
    Is there an easy way to export single tracks
    solo each and export

  • I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record?

    I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record of the articles I intend to read?

    I'm currently dealing with this issue myself, except that my rMBP has NO articles in the reading list.  It's a brand new rMBP too, purchased just this week, with the 2.6 Ghz Processor & 16GB of RAM.
    Let's see what we can find.  I may just take it back to the Apple Store.

  • Any way to export with multiple presets at once?

    Hi! Is there any way to export with multiple presets at once? I do a lot of product photography, usually clients send me around 5 to 10 pieces to photograph, and from each photo requires to be exported to about 7 different formats and sizes for different uses. I have a preset for each export, but this requires multiple clicks per export, select the preset, the destination folder, etc.....   and at the end I end taking about 1 hour to just export files when if I could just select 1 time a folder of presets and the destination folder just once, then it will take no time to get all oft those exports.
    Thanks!

    Some of those other photographers have assistants they can task with doing the drudgery.
    I would describe what you're wanting scripted multiple exporting, not multiple export presets, because multiple-exports don't necessarily rely on presets, just initiating an Export and clicking on various things for each one.
    I assume you have a preset set for each of the 7 format-size-uses variations, and then most of the time consuming part is setting the Choosing the destination folder that gets mirrored to DropBox?  You can copy/paste most of the path into the Folder address area after clicking Choose.
    Without knowing what your master-photo folders and dropbox-mirror folder names and organization are it's hard to know if you've thought of all the shortcuts you might use or if things are organized in the most efficient manner.
    If you're on Windows, maybe something like AutoHotKey macros would help with what you're doing.

  • Any way to export from iPhoto and have the file date be the photo date?

    I can't deal with iPhoto any longer. I just imported photos from the last few days and they ended up being associated with some "Event" from Jul 19, 2007. So now I have an event that spans Jul 19, 2007 to Feb 21, 2009!!! I'd like to just display, sort, view all photos in my library by date (I am meticulous about dates on all my devices) but apparently that's not possible anymore. "Events" is the worse thing to ever happen to my photo library...
    So I'd like to export them all and just use the Finder. It actually works the way I'd like. However there does not seem to be any way to export the photos so that the file creation or the file modification date is the actual date the photo was taken as shown in the information box in iPhoto. Does anyone know how to to this? Or is this just the iPhoto engineers screwing with people like me who have gotten disgusted with their product?
    Thanks!

    Yes, I know what the Finder is... The cool thing is it actually does know about the contents of the file. For example it can display thumbnails of the images contained within.
    Even better the files can be sorted any way you want, are not hidden in some odd proprietary package, can be backed up, restored at will and can easily be programmatically changed using AppleScript. The file system for an OS is generally bullet-proof and as such doesn't screw with dates like iPhoto did (the events stuff screwed with all our dates and has been a disaster for us and the 40,000 or so pictures we had in our library).
    iPhoto has just gotten too modal, too bloated, and too proprietary while not providing the basics like a way for my wife and I to have a single library for all our photos. On the other hand using just the file system and some network storage this is easy.
    For the recored most pros I consulted with have moved to the file system and Finder as their primary means of managing their photos. I'm just looking for an easy way to get my stuff out of iPhoto so I can do the same.

  • Any way to export to specified file size?

    Is there any way to export images so they are sized to fit within certain dimensions AND a specified file size? Similar to 'image processor' in Bridge/CS3 or the older Doc Brown's image processor.
    Example: (processing images for web use)
    I want to export a batch of RAW files to jpg,
    Size them to fit within 800px x 800px,
    And have them be a consistent file size of around 100kb
    (This has been possible to do in Adobe Bridge for years)
    I know I can edit Aperture's export preferences and adjust the image quality slider but final images have a range of file sizes and I find myself having to re-export some images over again after adjusting image quality to reach the desired size. This is a trial and error process each time.
    Another workaround is to export the images as .tif files, then open in Adobe Bridge and process into jpg's using 'image processor' to reach the desired size. But that effectively negates the use of Aperture in the first place for batch processing files for size. In this case, it'd be more efficient to take Aperture out of my workflow completely and do everything in Adobe Bridge.
    Has anyone found a plug-in or less tedious workaround for this?
    Cheers,
    J

    James, you said "my website provider places an upper limit on file size and dimensions per image."
    Aperture does take care of half of that, the pixel dimensions. If it was me, I would test out a few images at various levels of jpg quality (5, 6, 7 etc.) and see where both the file size ends up and how the quality looks. Then, just go with one your favorite combinations. Images with more detail will be larger and images with less will be smaller. In the long run, it should even out. If you had the ability to request a certain size, some of your images may look good and others bad. Personally, I would be more concerned with quality than a few k of pixels.

  • Is there any way to export IT Resource data from OIM using the export tool?

    Hello,
    we are trying to migrate an OIM development environment to a preproduction environment and we need to migrate more than 400 IT Resources. We have exported some IT Resources and when we imported them in the preproduction environment their data was not migrated. Is there any way to export IT Resource data from OIM using the export tool? Or is there any other way to do this without doing it by hand?
    Thank you for your help
    Kind Regards

    Well , OIM doesnot provide any such facility to export ITResource data along with ITResource .
    Directly updating the DB could be an option ..
    Thanks

  • Best Way to export synth tracks from logic into Protools LE

    Hi I have recorded my song in Logic using the software instruments and I am going to mix it in protools any suggestions as to the best way to get these tracks out of logic and into protools? Just wondered what different options there are and if there are any audible differences once put into protools. thanks for any thoughts.

    "Export all Tracks as Audio Files" found under File>Export.
    This will render audio files of your software instruments that start at bar 1, beat 1, and can be dragged right into Pro Tools. The export happens "pre-fader", so it is bounced at unity gain, and excludes any automation.
    If there is automation that needs to be included (like a filter sweep or something like that), you'll need to solo the track, and bounce it, because a bounced file does include automation.
    Also, if you're using a multi-channel instrument, you'll need to bounce those tracks separately as well.

  • Any way to improve response time with iPhoto 8.1.2 using Mountain Lion ?

    Any way to improve response time with iPhoto 8.1.2 using Mountain Lion ?  Can you store photos on a separate hard drive and use a smaller file for openning iphoto?

    How did you move your iPhoto library to the new system?  the recommended way is Connect the two Macs together (network, firewire target mode, etc)  or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
    LN

  • HT201210 My itouch screen froze showing "plug to itunes" after trying to update to iOS6. Is there any ways to export all the pictures from it before restoring?

    My itouch screen froze showing "plug to itunes" after trying to update to iOS6. It still can be turned on and off. But the screen froze showing that message. I perhaps need to restore it. But is there any ways to export all the pictures from it before restoring?

    Only if y can get the iPod out of recovery mode with the program. Otherwise you will have to restore via iTunes which erases the iPod.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • HT1391 iphone5 is solen is there any way we can trace it with serial numer

    iphone5 is stoel is there any way we can trace it with yhe serial number

    That is not possible.
    If Find My iPhone was enabled on the device prior to it being lost, simply sign into iCloud.com and see if it can be tracked.  If the phone is turned off, the SIM card is removed, or it otherwise is unable to connect to the Internet, the Find My iPhone feature will be unavailable.

  • Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking

    Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking
    thanks everyone

    BaconHouseVidz wrote:
    … at the same time…
    in hope to speed things up?
    no, no effect.

  • TS1741 i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

    i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

    Doubtful - why did the Remote app lose connection?

  • Is there any way to export complete PR as an XML?

    hI,
    Please help me to know if there is any way to export Complete PR as an XML...if its der,then how we can do it?
    Also, if data is already der in database table then is it feasible to create a PR(reverse case)?
    Kindly Help.
    Thanks,
    Lina

    Hi
    You have the opton in PR to export to XML. But I am not sure whether it suits your requirment.
    Go to ME53N>Click on Export Button>Spread Sheet>Click the radion Button All Available formats>Select from Drop down SAP XML format
    Hope it helps
    Karthik

Maybe you are looking for