Any way to not pan in a slide show?

Hi, my daughter needs to create a slide show of her life and we found that panning on some slides will sometimes zoom in and not show faces or other important features of an image.
Is there any way to turn panning off and just show the entire slide statically?
Is there any way to guarantee that the important aspect of a slide is always shown - without cropping the slide too much?
Thanks,
doug

dlittlejohn
Yes you can turn off the Ken Burns Effect as the panning is called. On the toolbar, click on Slideshow, then Settings, then Uncheck 'Automatic Ken Burns Effect'.
Unfortunately, you'll have to uncheck it for each slideshow you make.
Regards
TD

Similar Messages

  • Is there any way to NOT have iTunes/iPod movies show up under Movies in FR?

    I only want the movies in my Movie folder to show up in Front Row. Right now the movies in thr Movie folder are relegated to the bottom, after a long list of the mpeg4 files that I have in iTunes. These are lower res. movies to watch on my small iPod screen, whereas the higher res movies in my Movie folder are for watching on my large monitor. Is there a way to eliminate the list of iTunes mpeg4 movies from the Front Row menus (or at least combining them into one folder)?
    G5 Quad   Mac OS X (10.4.9)  

    Hi Marty J. I tried what you said, but all my iTunes Movies still form a longlist at the beginning of Front Row's Movie selection.
    Incidentally, unless I misunderstood you, you can't "change" the "Show" box to anything. All I could do was to type "iPod Movies" into the "Show" box. Afterwards, FR shows no category called "iPod Movies" and all of my iPod movies still create a long list before I finally reach the movies of my "Movie" folder (i.e., Users>username>Movies). I want the contents of the Users>username>Movies folder to show up at the top of the list in Front Row. I don't want to have to scroll all the way thru 60+ iPod movies before I get to this folder's contents. Any other suggestions? Thanks.
    G5 Quad   Mac OS X (10.4.9)  

  • Is there any way to disable needles on a slider?

    I was wondering if there were any way to disable needles on a slider. What I have is a slider with four needles, but I need to be able to disable two of the needles programmatically. I am currently setting the needles to transparent color and setting their values to +/- inf, but the user can still accidently select and move them. While this does not cause the program to work incorrectly, it does cause some visual confusion, since I am using fill modes. Basically, I am using the slider to allow the user to select areas on a graph, the filled area between the sliders are the areas that are being measured on the graph. The extra two sliders are for when the user wants to select multiple areas for measurement, and thus are
    not always in use.
    Jon D
    Certified LabVIEW Developer.

    Just ran into this issue with an application.  Solution attached. 
    Use the Value Changed Event and set the current value of the slider to the previous value.  Some display artifacts occur as the UI thread is executed, but the subVI prevents the user from changing the value of a slider.
    -Adam
    Attachments:
    SliderNeedleLock.vi ‏17 KB
    TEST_SliderNeedleLock.vi ‏16 KB

  • Any way around not using Desktop mamager?

    Hi guys is there any way around not using the desktop manager?, I find it way too bloated for my slow computer, all I wanna do is transfer some mp3's to my phone.
    Thanks.

    Hello,
    Yup -- if you've installed the Desktop Software and enabled Mass Storage Mode, then your BB should appear as another drive letter in Windows...and you can treat it just like any other USB drive.
     KB13564How to enable or disable mass storage mode on the BlackBerry smartphone
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Is there any way to not use the plugin container for firefox?

    Is there any way to not use the plugin container for firefox? Ever since I updated, my firefox browser has been crashing almost every day and it always says that the plugin container crashed, but the rest of firefox freezes up as well, so I am forced to end the process itself.

    See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
    You can set the prefs dom.ipc.plugins.enabled.* to false on the about:config page to disable the plugin-container process.
    dom.ipc.plugins.enabled (currently false by default in Firefox 3.6.6)
    dom.ipc.plugins.enabled.npswf32.dll (Flash)
    dom.ipc.plugins.enabled.npctrl.dll (Silverlight)
    dom.ipc.plugins.enabled.npqtplugin.dll (QuickTime)

  • Any way to not have the albums sh

    Is there any way to not have the albums show up when selecting AND playing a song?
    Thanks.

    Just thought i'd mention that you can do this much more easily by using a program like mp3Tag (free) where you can batch rename file tags. In other words, you can select all your files and change all the albums to blank or whatever you want in one process. take care
    dio

  • Best way to make a high quality slide show from still images

    I know that this may have been asked before but i am trying to create a high quality slide show of my still images that will look great on a TV. I have tried imovie, idvd, and iphoto and i am not happy with the quality. i do own FCP. can anyone walk me through a way to create a high quality slide show and then burn it on IDVD.
    any info would be appreciated
    John
    power mac g5 dual 2 gig   Mac OS X (10.4.6)  

    i usually lay everything out in FCP. if you're going to use music or voice overs, lay down your audio tracks as appropriate. then cut all of the stills to you audio to get the timing just right. don't do any motion graphics in FCP. then, when you're satisfied with the cuts, send the entire sequence to Motion and do all of your motion graphics (grow/shrink, spins, throws, fades).
    i find that all of the motion effects can be done more easily in the Motion application. this has been my preferred workflow for over a half-dozen slideshows now.
    scott
    PowerMac G5 2.5GHz   Mac OS X (10.4.5)  

  • Reading the older questions, is there a way in which the full screen slide shows can be saved and/or exported?

    Reading the older questions, is there a way in which a full screen slide show (such as places or geotagged photo's) can be saved and/or exported for viewing by another party?

    Yes. Just export the slideshow and select your preferred output size.
    Regards
    TD

  • I'm migrating a WP site to BC. I want to use a web app for their Blog...is there any way to have the web app item show in the root url vs root-url/web-app-name/web-app-item-name?

    I'm migrating a WP site to BC. I want to use a web app for their Blog...is there any way to have the web app item show in the root url vs root-url/web-app-name/web-app-item-name?

    Hi Justin,
    There's nothing like that atm. Please see http://forums.adobe.com/message/4730854
    Cheers,
    -mario

  • Is there any way to not show the device password on start-up?

    The device is set to automatically show its password on start up. Is there any way to hide the password so it does not show?

    I agree with you on this one. If they would just have an option that when you touch none interactive section maybe just the home button appears.
    I rarely use that navigation system and the people that I have tested ralley know what to do when it pops up. If the page number came up instead of a slider, I think people would get it. Plus instead of icons have text. Table of content, home, back.

  • Any way to add transitions to multiple slides??

    I just completed a 200 slide presentation which I imported into the iPad. At the time, I was not worried about slide transitions. I thought that once on the iPad, I could like on the mac, select a group of slides and add the same transition to all at once. I just tried on the iPad and it only added to one slide at a time!! Ugh!!
    I had to make numerous changes to the slides once they hit the ipad for formatting, fonts, and so on so it's not practical to tweak on the mac then send back to the iPad.
    Is there any way to add a transition to multiple slides at once on the iPad?
    Thanks

    Thanks, David, for your reply; the slides are all just basic dissolve transitions. nothing fancier, and dissolve is supported in both the transition and the build areas of keynote for ipad according to the help doc, which I had read, so this is why I am confused. I did originally create the document in keynote '08, but opened and saved it in '09, and then selected the slides, set dissolve as transition, and saved as a test file. It's an '09 file now, and some slides dissolve, others don't although they were all selected to dissolve. I've used Keynote for years on my mac so I know I set up the dissolve correctly. just not sure why only some of them are working and others not in the ipad file. I'm going to create one from 'scratch' using Keynote '09 and see if that makes a difference.

  • Any way to NOT import JPEGs with RAWs?

    When I import RAW files from my camera, Aperture imports the JPEG images as well but keeps it hidden from view. I dug into the Aperture Vault to check out what was going on, and it stores the 4-5 MB JPEG alongisde each RAW file. I can't see the reason for this. I'm not interested in these crappy JPEGs and they are just taking up room on my hard drive. Is there any way to get Aperture to not import the JPEGs when importing RAW files?

    step 1 ... stop shooting RAW+JPG ...
    ok, i got that out of the way ... do you import directly from the camera ??? or directly from card reader into aperture ???
    me, i NEVER import directly from card to program ... EVER ...
    last week i needed to shoot RAW+JPG, only because i needed quick access to some JPGs and didn't have aperture handy ...
    when i returned i copied my card contents to a desktop folder (like i always do) and used the search box and entered JPG ... then i deleted every one - they had served their purpose ... then i dupped the folder of RAW files and then imported into aperture ... no JPGs imported ...
    seriously the only way to not have aperture import the JPG with the RAW is to weed out the JPGs (or not shoot RAW+JPG - but i already covered that)

  • Extinction of MobileMe Galleries...any way to NOT move them to Aperture?

    As with many (former) mobileMe users, I've received the usual automated warnings about the end of mobileMe services and already prepared for the transition by making alternative arrangements for sharing pictures.
    My master images, as well as the specific group selections of pictures used for my former mobileMe galleries are alive and well in at least one if not several places (multiple backups), and so I have neither the need nor the desire nor the room on my hard drive to waste on downloading my mobileMe galleries back to any of my machines.
    Is there any way to STOP Aperture from doing this?  I'd like my application back, ThankYouVeryMuch.  I can brute force things by turning off AirPort, but that's ridiculous.  Whatever happened to letting users, you know, remain in charge of their applications and files?!?

    In both iPhoto and Aperture I went into preferences and deleted my MM accounts then emptied the trash of the versions. Haven't had the pop up notifications since.

  • Any way to not include the sender on their own email if they're in a distribution list?

    Howdy,
    If my team has an email distribution list, and I need to email everyone else on the team, is there any way to set something so that the person sending the email doesn't get their own email back if they are on the list they are sending to?
    Currently, if I send an email to our "IT" list, and I'm on the "IT" list, I get a copy of my own email sent back to me.  This seems silly to me.  I know I've used some program in the past that was smart enough not to do that
    but I don't recall if Exchange/Outlook has the ability to not do that.
    Thanks.

    Howdy,
    If my team has an email distribution list, and I need to email everyone else on the team, is there any way to set something so that the person sending the email doesn't get their own email back if they are on the list they are sending to?
    Currently, if I send an email to our "IT" list, and I'm on the "IT" list, I get a copy of my own email sent back to me.  This seems silly to me.  I know I've used some program in the past that was smart enough not to do that
    but I don't recall if Exchange/Outlook has the ability to not do that.
    Thanks.
    An outlook rule or hub transport rule to delete messages sent from you should do it. In the old Exchange/Outlook days, it didnt do that, yes.
    Twitter!:
    Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
    Well, I'd want to do this globally at our company, not just for myself.
    I dont think there is any easy way to do that then. 
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Any way to not display movies in My Movies?

    Hey all,
    I know you can setup parental controls to not allow the viewing of movies over a certain rating, but is there any way (or trick) to prevent movies of certain ratings from even displaying (unless the code is entered)?
    Thanks.

    I think it's a bit like what people have been complaining about with parental controls not preventing cover art/posters for films unsuitable for minors - parental controls might stop someone watching the film but not seeing it's available with cover art.
    It's not much different to viewing iTunes stoe in iTunes 9.0 and perhaps earlier.
    I mean I click on films (UK=movies elsewhere) and get the posters for Orphan, Terminator Salvation, Drag Me to ****, Blood the Last something and Wolverine mixed with Ice Age, Hannah montana etc

Maybe you are looking for

  • How to use shared variables to address multiple Watlow controller​s on the same COM port

    Hello, I am trying to use LabVIEW 2010 to control 4 Watlow temperature controllers on one COM port. 3 are Model 96 and 1 is an EZ zone controller. Each controller has a unique modbus address, and I am trying to read from and write to individual regis

  • I cannot get my mpg videos to add to home videos library

    I am moving to my first Mac and I love it so far. I am trying to get my Ipad and Ipod now to sync on this machine instead of my old windows machine. I have all of my files moved over to the Mac. I am adding things to my library through iTunes but It

  • How oracle replaces "carrage return, tab and blank" in v$sql.sql_text??

    Hi. all. I am wondering how oracle replace "carrage return, tab and blank" character to v$sql.sql_text?? I am try to find sql_id by the following query. select * from v$sql where sql_text like 'blur blur %'. However, how can I specify 'blur blur %' w

  • Problem connecting weblogic 5.1 to AS400 DB2 version

    Hi All, I am having problem connecting from a weblogic server 5.1 version on win2000 machine to AS400 DB2 version using iToolbox jdbc driver "com.ibm.as400.access.AS400JDBCDriver".The following is the weblogic connectionpool : weblogic.jdbc.connectio

  • Headphones not disconecting on N8

    Everything was working fine on my N8, but it just started to select an accessory as defult and after that is selected, it won't go back to normal.  If you connect the headphones, and they dissconect them, it keeps thinking that they are connected and