Anybody using 11g RAC Database with OIM 9.1.0.2?

Hi,
We have poor performance problems with 11g RAC Database with OIM 9.1.0.2.
It looks like the issue could be because of RAC Ccluster.
Anybody using 11g RAC Database with OIM 9.1.0.2?
If so, What is the JDBC Driver r u using? Also what App Server (Weblogic or OAS etc) ?
Appreciate your input.
Regards
Vijay Chinnasamy

We are using weblogic 10.3. And I am sorry to tell you that we are yet to move to production.
We are planning to have Database in RAC, so i just thought of taking inputs from you.
can you tell me under what operations you face the poor performance issue?
For us the max no. of users in production is around 6k. So I am wondering how this RAC availability will affect the performance.
Thanks for sharing your inputs.

Similar Messages

Use Oracle RAC Database 10g on SunOS nova 5.9

Hello!
We use Oracle RAC Database 10g Enterprise Edition Release 10.1.0.5.0 - 64bit that consist of two nodes on SunOS nova 5.9 Generic_117171-17 sun4u sparc SUNW,Sun-Fire-V440.
Connection string as follows:
jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=ON)(ADDRESS=(PROTOCOL=TCP)(HOST=host1)(PORT=1521))(ADDRESS=
(PROTOCOL=TCP)(HOST=host2)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=proddb))).
Clustered Java application performs direct JDBC INSERT of record into database throw oracle.jdbc.pool.OracleDataSource.
Table got the following fields:
FIELD1 VARCHAR2(100 BYTE) NOT NULL,
FIELD2 VARCHAR2(100 BYTE) NOT NULL,
FIELD3 VARCHAR2(100 BYTE) NOT NULL,
FIELD4 VARCHAR2(100 BYTE),
FIELD5 VARCHAR2(100 BYTE),
FIELD6 VARCHAR2(100 BYTE),
FIELD7 INTEGER,
FIELD8 BLOB,
FIELD9 BLOB
Approx in 60 milliseconds another application node performs SELECT of that record, which return void result. However next SELECT returns needed result.
Defect is occurs with 50% probability.
Whether problem is connected with defect in Oracle RAC/JDBC Driver?
Thanks in advance!

RAC propogates commit messages using a method which piggy-backs on the next available inter-instance message. I think it's called the Lampart Method, but anyways .... it means you have an uncontrollable delay between committed data in your two instances.
Look at the init.ora parameter max_commit_propagation_delay, and consider setting it to 0. The parameter is briefly described in the Oracle Reference Guide.
cheers,
-Mark
www.remidata.com/book_nuts2soup.htm

Open 10g/11g RAC database in Non RAC Mode

Dear Friends,
How i open 10g and 11g RAC database in Non RAC Mode (open single instance in order to perform upgrade)
Later i will convert the upgraded DB to RAC DB
Regards,
DB

user564706 wrote:
Dear Friends,
How i open 10g and 11g RAC database in Non RAC Mode (open single instance in order to perform upgrade)
Later i will convert the upgraded DB to RAC DB
Regards,
DBEdit spfile and set cluster_database=false before starting database in upgrade mode(optionally you can unset other cluster parameters).
So you upgrade using only 1 instance of database.
Once the upgrade is finished start the other instance as well and set cluster_database=true
Also see preupgrade process - http://docs.oracle.com/cd/E11882_01/server.112/e23633/upgrade.htm#i1011979
Post upgrade -> http://docs.oracle.com/cd/E11882_01/server.112/e23633/afterup.htm#CEGCFJJC

Making single instance DB/ RAC Database with 2 instances

i created single instance DB , now i want to make it RAC DB with 2 instances. Need guidelines/Notes to do so.

Creating RAC Databases with the Database Configuration Assistant
10g Release 1 (10.1.0.3) for Linux x86-64
http://download-east.oracle.com/docs/html/B14406_01/dbcacrea.htm

Is it possilbe ro use a 9i Database with 11g 11.1.1.1 for plsql pursposes?

Hello,
I am helping someone out that is in the process of upgrating Forms developed in 6i to 11g Fusion, and their databases fom 9i to 11g. They need to show feasibility of the task first, and test the forms.
They have two new_ boxes already setup with 11.1.0.7 and 11.1.1.1 ... we've compiled some of the easier 6i forms and the plsql connections works as well.
We are trying a dads plsql connection from 11g to the old 9i database and cannot get it to connect. We get the old 503 error:
Service Temporarily Unavailable
Sorry!The server is currently unable to handle the request due to a temporary overloading or maintenance of the server.
Now I know the docs say:
You can use the following database versions with Oracle Fusion Middleware 11g Release 1 (11.1.1):
Oracle Database 10g Release 2 (10.2.0.4)
Oracle Database 11g Release 1 (11.1.0.7)
But is it possible, possible_, to connect to the 9i from 11g, and if so, shed some light on the connection instrcutions?
Thanks a million
JD

Okay I've changed my environment to FB 4.7 and Air 3.4 SDK. The permission dialogue now works in iOS 6, however, in Android 4.1.1 it still remains suppressed. Has anyone been able to figure this out?

Database migration from non rac and non asm to RAC database with ASM

HI,
i have requirement to import one database ( db1) which running one node with out ASM and with out RAC , now i want to import that database with rman backup to another database ( db2) which running on different server with 3 node RAC and ASM ( disk group +DATA ) , can you please provide me the steps how i can migrate.? ( i have created db2 with dbca with RAC).
regards,
sri

Sri,
This could be done multiple ways. Simplest for you is to use DBCA:
http://download.oracle.com/docs/cd/B28359_01/install.111/b28264/cvrt2rac.htm

Not able to connect to RAC Database with VIP entries

Hi All,
My RAC database run with Physical Host entries in listener and tnsnames files.
But VIP services are running in both nodes.
Now i want to use VIP enties to connect to the RAC database from client side.
I have modified the both the listener and tnsnames files with VIP entries and bounced the instance.But It didn't work.
Please suggest what could be done in this issues.

Hi,
It is 10.2.0.3 and remote_listener is set to LISTENER_Hostname and Remote listener is configured.
Thanks

Refresh new created RAC databases with expdp dmp got SCN error

Hi, I did expdp full on a single instance database on AIX and scp to the new created LINUX RAC databases and ran a impdp full.
However I saw the following error:
Processing object type DATABASE_EXPORT/SYSTEM_PROCOBJACT/PRE_SYSTEM_ACTIONS/PROCACT_SYSTEM
Cannot set an SCN larger than the current SCN. If a Streams Capture configuration was imported then the Apply that processes the captured messages needs to be dropped and recreated. See My Oracle Support article number 1380295.1.I checked support.oracle.com, that note is not existed.
Can anybody help me ? I would like to know if this is the error I can ignore.
Thanks in advance.

What user was used to perform expdp and impdp ? Pl note that "/ as SYSDBA" should not be used. Pl see the first "Note" sections here
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#i1012781
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_import.htm#i1012504
HTH
Srini

How to use your own database with your users to authenticate in a Web app?

Hello, everybody!
I'm starting to write my first web application and I'm going to use JSF, JPA and EJB3 in this application. One of the first things that I have to do on it is the authentication part where I'll have a page with a user name and a password for the user to login. So, as I'm new to all this in Java (I've already implemented this on .NET in the past), I was studying the Java EE 5 Tutorial, especifically the section "Example: Using Form-Based Authentication with a JSP Page". But I saw that the users that the sample application uses come from the file realm on the Application Server. The users are created there and assigned a name, a password and a group. After the users are in the Application Server we can simply uses forms authentication declaratively in the deployment descriptor (web.xml).
But the problem is that this doesn't work to me as I already have my own database with my users, so I want to use it instead of having to create the users on the Application Server.
So, I'm asking you how to do that. Of course I'm not expecting that you place the code here to me as I know that such a thing could be complicated. Instead, I'm asking if you know about some tutorial, article, book or something that teaches how to do what I want. But I would like to see theses examples using JSF and/or EJB3 because these are the technologies that I'm using to develop. It's a pity that the Java EE 5 Tutorial doesn't have an example using a custom database as I know that this situation is very common in the majority of web sites.
Thank you very much.
Marcos

From memory, it goes like this... You just create a
raw jdbc connection on your user database using a
special "login" DB user account, which has
permissions only to an "authenticate" stored query,
which accepts two arguments: username & password, and
returns a boolean 0 or 1 rows found.When I implemented this in .NET's ASP.NET I had the same solution. I had an special user created in the database that I used to log in. When the real user entered his username and password I was already logged in and I had just to check his username and password agains the right table in my database.
But that was only possible bacause when I connected to the database using my hidden user, I used the rights APIs in ASP.NET that coordinate the authentication process. This means that before login in, no one could access any resources (pages, atc...). So what I'm saying is that I can't manager this manually in Java. Java has to have some API or whatever to allow me to control the login process programmatically, while letting the Application Server control the access to the resources.

Can I use two different database with DBSystemLoginModule?

Finally I can login with Database user id by DBSystemLoginModule on Embedded oc4j server.
But I confused between [b]jazn-data.xml and system-jazn-data.xml.
Which xml do I have to edit for jdbcUrl and jdbcDriver?
Now I would like to use two different database(such as only sid is different).
In this case I want to show specific database name as realm name.
What should I do?
When I use DBSystemLoginModule, I edit JdbcUrl in system-jazn-data.xml.
So can I pass the parameter for sid programmatically?
And also I tried to run my application with other database with DBSystemLoginModule on Embedded oc4j server.
I changed few things(jdbcUrl at system-jazn-data.xml,jazn-data.xml in embedded-oc4j-server/config and database connection for BusinessComponents at Project Properties of Model/ViewController.
But I got some error.
Did I miss something?
----< my error messgae >------
500 Internal Server Error
JBO-30003: The application pool (customer.model.datamodel.CMAppModuleLocal) failed to checkout an application module due to the following exception:oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002) Message was edited by:
Message was edited by:
sdcsdc

I think I understand now, you are modifing the custom login modules configuration within the system-jazn-data.xml file. This is a bit dangerous! Didn't you register the login module in your orion-application.xml? For example, this is the way I do it:
<web-module id="customProv-web" path="customProv-web.war" />
<persistence path="persistence" />

<security-role-mapping name="sr_developer">
<group name="developers" />
</security-role-mapping>
<security-role-mapping name="sr_manager">
<group name="managers" />
</security-role-mapping>
<jazn provider="XML">
<property name="custom.loginmodule.provider" value="true"/>
<property name="role.mapping.dynamic" value="true"/>
<property name="role.compare.ignorecase" value="true"/>
</jazn>

<jazn-loginconfig>
<application>
<name>customProv</name>
<login-modules>
<login-module>
<class>oracle.security.jazn.login.module.db.DBTableOraDataSourceLoginModule</class>
<control-flag>required</control-flag>
<options>
<option>
<name>data_source_name</name>
<value>jdbc/OracleDS2</value>
</option>
<option>
<name>roles_fk_column</name>
<value>userName</value>
</option>
<option>
<name>table</name>
<value>userinfo</value>
</option>
<option>
<name>groupMembershipTableName</name>
<value>groupinfo</value>
</option>
<option>
<name>groupMembershipGroupFieldName</name>
<value>role</value>
</option>
<option>
<name>usernameField</name>
<value>userName</value>
</option>
<option>
<name>user_pk_column</name>
<value>username</value>
</option>
<option>
<name>passwordField</name>
<value>passWord</value>
</option>
</options>
</login-module>
</login-modules>
</application>
</jazn-loginconfig>
<log>
<file path="application.log" />
</log>
<namespace-access>
<read-access>
<namespace-resource root="">
<security-role-mapping name="<jndi-user-role>">
<group name="administrators" />
</security-role-mapping>
</namespace-resource>
</read-access>
<write-access>
<namespace-resource root="">
<security-role-mapping name="<jndi-user-role>">
<group name="administrators" />
</security-role-mapping>
</namespace-resource>
</write-access>
</namespace-access>
</orion-application>

Using a MsAccess database with Dreamweaver CS4?

Hi Everyone,
I have a question concerning using a Microsoft Access Database with Dreamweaver.
First, I was wondering if this was possible. Second, if it is, could someone give me instructions or a link on how to do this. I am pretty new to Dreamweaver, code, etc..., so simpler instructions on how to acheive this would be great.
Here is some information...
1) I am running Windows XP SP2
2) I am using Microsoft Office 2003 (Acces included)
3) I am using Dreamweaver CS4
4) I have installed XAMMP (Apache,MySQL, FileZilla, and PHPmyAdmin, as far as I know)
If anyone needs more information, I'll be hapy to share it as soon as possible.
Any help is greatly appreciated,
Musicman1994

The choice of database really depends on which server-side technology you plan to use, and what you're actually planning to use it for.
Access was designed to create databases for small office systems. Although I personally found it very confusing, a lot of people like it and say it's easy to use. However, its major drawback is that it creates very large files; and as soon as the website gets a reasonable amount of traffic, Access has a tendency to freeze or lock up. You can create your database in Access and then export it to another database system, such as Microsoft SQL Server or MySQL. But it's better to start with the database that you ultimately plan using.
I certainly wouldn't recommend developing anything in ASP and then attempting to convert the website to PHP. Although all server-side programs share common features and structures, the code is completely different. So, take some time over choosing your technology first. If you have never developed in ASP, you should be aware that Microsoft stopped developing it about ten years ago. It's still popular and widely available, but ASP is likely to dwindle in usefulness as the years go by. Use PHP or ColdFusion, both of which are supported by Dreamweaver. The other main alternative is ASP.NET, but that's no longer supported by Dreamweaver.

How to use non-MySQL database with DW and PHP...???

I need to connect to a data-source that is not MySQL from
with my PHP scripts. The only option I get under the Databases tab
in the Application panel is MySQL Connection. What about just
standard ODBC connections? Will DW not handle those for me? Do I
have to do all of that by hand??
Any information would be greatly appreciated. Thanks!

"Angell EYE" <[email protected]> wrote in
message
news:fc4eaj$fmn$[email protected]..
>I need to connect to a data-source that is not MySQL from
with my PHP
>scripts.
> The only option I get under the Databases tab in the
Application panel is
> MySQL
> Connection. What about just standard ODBC connections?
Will DW not
> handle
> those for me? Do I have to do all of that by hand??
>
> Any information would be greatly appreciated. Thanks!
There once existed an opensource servermodel called phakt
that used the
ADODB database abstraction library,
the company that created and supported it was bought by Adobe
and
subsequently the project was cancelled.
A group of people (including me) started a community
initiative@
http://openphakt.sourceforge.net
to continue distribution and development of
phakt, but unfortunately I don't have access to Dreamweaver
CS3 due to lack
of funding.
Phakt will almost certainly NOT run on CS3 in it's current
state, but is
should support previous versions.
Joris

Using an external Database with Xoops CSM

My site is built using Xoops 2.0 and MYsql. The xoops system
that I am using is provided by my hosting comapany, therefore I do
not have the information I need to create a new table. so I did the
next best thing I created a table using the sql databases that came
with the account. To make the pages transition smooth I have
created a database driven page displaying events in the scripting
language of PHP wrapping the page in the xoops header and footer.
it seems to work well except that when I added the paging
navigation it won't display can anyone help
The url is
View page
here
===========================================Here is the
code===========================================
<?php require_once('../../Connections/SkateEvents.php');
?>
<?php
$currentPage = $_SERVER["PHP_SELF"];
?>
<?php
include("mainfile.php");
include(XOOPS_ROOT_PATH."/header.php");
?>
<?php
$maxRows_allevents = 5;
$pageNum_allevents = 0;
if (isset($_GET['pageNum_allevents'])) {
$pageNum_allevents = $_GET['pageNum_allevents'];
$startRow_allevents = $pageNum_allevents *
$maxRows_allevents;
mysql_select_db($database_SkateEvents, $SkateEvents);
$query_allevents = "SELECT * FROM events ORDER BY `Date`
ASC";
$query_limit_allevents = sprintf("%s LIMIT %d, %d",
$query_allevents, $startRow_allevents, $maxRows_allevents);
$allevents = mysql_query($query_limit_allevents,
$SkateEvents) or die(mysql_error());
$row_allevents = mysql_fetch_assoc($allevents);
if (isset($_GET['totalRows_allevents'])) {
$totalRows_allevents = $_GET['totalRows_allevents'];
} else {
$all_allevents = mysql_query($query_allevents);
$totalRows_allevents = mysql_num_rows($all_allevents);
$totalPages_allevents =
ceil($totalRows_allevents/$maxRows_allevents)-1;
$queryString_allevents = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_allevents") == false &&
stristr($param, "totalRows_allevents") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_allevents = "&" .
htmlentities(implode("&", $newParams));
$queryString_allevents =
sprintf("&totalRows_allevents=%d%s", $totalRows_allevents,
$queryString_allevents);
?>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN" "
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
<title>Events Page</title>
<style type="text/css">

</style></head>
<body>
<table width="750" border="1" align="center"
cellpadding="3" cellspacing="5">
<tr bordercolor="#996600">
<td width="82"><div align="center">
<h3>Date</h3>
</div></td>
<td width="136"><div align="center">
<h3>Events</h3>
</div></td>
<td width="124"><div align="center">
<h3>Host</h3>
</div></td>
<td width="177"><div align="center">
<h3>More info</h3>
</div></td>
<td width="34"><div align="center">
<h4>Host id</h4>
</div></td>
</tr>
<?php do { ?>
<tr>
<td><?php echo $row_allevents['Date'];
?></td>
<td><?php echo $row_allevents['Events'];
?></td>
<td><?php echo $row_allevents['Host'];
?></td>
<td><div align="center"><a target="_blank"
href="
http://sk8photos.com/xoops/html/images/flyers/<?php
echo $row_allevents['More info']; ?>">Click
Here</a></div></td>
<td><?php echo $row_allevents['Host id'];
?></td>
</tr>
<?php } while ($row_allevents =
mysql_fetch_assoc($allevents)); ?>
</table>
<p>
</p>
<table border="0" width="50%" align="center">
<tr>
<td width="23%" align="center"><?php if
($pageNum_allevents > 0) { // Show if not first page ?>
<a href="<?php printf("%s?pageNum_allevents=%d%s",
$currentPage, 0, $queryString_allevents); ?>">First</a>
<?php } // Show if not first page ?>
</td>
<td width="31%" align="center"><?php if
($pageNum_allevents > 0) { // Show if not first page ?>
<a href="<?php printf("%s?pageNum_allevents=%d%s",
$currentPage, max(0, $pageNum_allevents - 1),
$queryString_allevents); ?>">Previous</a>
<?php } // Show if not first page ?>
</td>
<td width="23%" align="center"><?php if
($pageNum_allevents < $totalPages_allevents) { // Show if not
last page ?>
<a href="<?php printf("%s?pageNum_allevents=%d%s",
$currentPage, min($totalPages_allevents, $pageNum_allevents + 1),
$queryString_allevents); ?>">Next</a>
<?php } // Show if not last page ?>
</td>
<td width="23%" align="center"><?php if
($pageNum_allevents < $totalPages_allevents) { // Show if not
last page ?>
<a href="<?php printf("%s?pageNum_allevents=%d%s",
$currentPage, $totalPages_allevents, $queryString_allevents);
?>">Last</a>
<?php } // Show if not last page ?>
</td>
</tr>
</table>
</body>
</html>
<?php
mysql_free_result($allevents);
include(XOOPS_ROOT_PATH."/footer.php");
?>
=============================================== End Code
=========================================

My site is built using Xoops 2.0 and MYsql. The xoops system
that I am using is provided by my hosting comapany, therefore I do
not have the information I need to create a new table. so I did the
next best thing I created a table using the sql databases that came
with the account. To make the pages transition smooth I have
created a database driven page displaying events in the scripting
language of PHP wrapping the page in the xoops header and footer.
it seems to work well except that when I added the paging
navigation it won't display can anyone help
The url is
View page
here
===========================================Here is the
code===========================================
<?php require_once('../../Connections/SkateEvents.php');
?>
<?php
$currentPage = $_SERVER["PHP_SELF"];
?>
<?php
include("mainfile.php");
include(XOOPS_ROOT_PATH."/header.php");
?>
<?php
$maxRows_allevents = 5;
$pageNum_allevents = 0;
if (isset($_GET['pageNum_allevents'])) {
$pageNum_allevents = $_GET['pageNum_allevents'];
$startRow_allevents = $pageNum_allevents *
$maxRows_allevents;
mysql_select_db($database_SkateEvents, $SkateEvents);
$query_allevents = "SELECT * FROM events ORDER BY `Date`
ASC";
$query_limit_allevents = sprintf("%s LIMIT %d, %d",
$query_allevents, $startRow_allevents, $maxRows_allevents);
$allevents = mysql_query($query_limit_allevents,
$SkateEvents) or die(mysql_error());
$row_allevents = mysql_fetch_assoc($allevents);
if (isset($_GET['totalRows_allevents'])) {
$totalRows_allevents = $_GET['totalRows_allevents'];
} else {
$all_allevents = mysql_query($query_allevents);
$totalRows_allevents = mysql_num_rows($all_allevents);
$totalPages_allevents =
ceil($totalRows_allevents/$maxRows_allevents)-1;
$queryString_allevents = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_allevents") == false &&
stristr($param, "totalRows_allevents") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_allevents = "&" .
htmlentities(implode("&", $newParams));
$queryString_allevents =
sprintf("&totalRows_allevents=%d%s", $totalRows_allevents,
$queryString_allevents);
?>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN" "
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
<title>Events Page</title>
<style type="text/css">

</style></head>
<body>
<table width="750" border="1" align="center"
cellpadding="3" cellspacing="5">
<tr bordercolor="#996600">
<td width="82"><div align="center">
<h3>Date</h3>
</div></td>
<td width="136"><div align="center">
<h3>Events</h3>
</div></td>
<td width="124"><div align="center">
<h3>Host</h3>
</div></td>
<td width="177"><div align="center">
<h3>More info</h3>
</div></td>
<td width="34"><div align="center">
<h4>Host id</h4>
</div></td>
</tr>
<?php do { ?>
<tr>
<td><?php echo $row_allevents['Date'];
?></td>
<td><?php echo $row_allevents['Events'];
?></td>
<td><?php echo $row_allevents['Host'];
?></td>
<td><div align="center"><a target="_blank"
href="
http://sk8photos.com/xoops/html/images/flyers/<?php
echo $row_allevents['More info']; ?>">Click
Here</a></div></td>
<td><?php echo $row_allevents['Host id'];
?></td>
</tr>
<?php } while ($row_allevents =
mysql_fetch_assoc($allevents)); ?>
</table>
<p>
</p>
<table border="0" width="50%" align="center">
<tr>
<td width="23%" align="center"><?php if
($pageNum_allevents > 0) { // Show if not first page ?>
<a href="<?php printf("%s?pageNum_allevents=%d%s",
$currentPage, 0, $queryString_allevents); ?>">First</a>
<?php } // Show if not first page ?>
</td>
<td width="31%" align="center"><?php if
($pageNum_allevents > 0) { // Show if not first page ?>
<a href="<?php printf("%s?pageNum_allevents=%d%s",
$currentPage, max(0, $pageNum_allevents - 1),
$queryString_allevents); ?>">Previous</a>
<?php } // Show if not first page ?>
</td>
<td width="23%" align="center"><?php if
($pageNum_allevents < $totalPages_allevents) { // Show if not
last page ?>
<a href="<?php printf("%s?pageNum_allevents=%d%s",
$currentPage, min($totalPages_allevents, $pageNum_allevents + 1),
$queryString_allevents); ?>">Next</a>
<?php } // Show if not last page ?>
</td>
<td width="23%" align="center"><?php if
($pageNum_allevents < $totalPages_allevents) { // Show if not
last page ?>
<a href="<?php printf("%s?pageNum_allevents=%d%s",
$currentPage, $totalPages_allevents, $queryString_allevents);
?>">Last</a>
<?php } // Show if not last page ?>
</td>
</tr>
</table>
</body>
</html>
<?php
mysql_free_result($allevents);
include(XOOPS_ROOT_PATH."/footer.php");
?>
=============================================== End Code
=========================================

Tips to make AWR useful on a database with nil activity

Experience Level : Beginner.
I'm playing with AWR making heads or tales of it. I'm getting the feeling that is your database is VERY low activity the AWR can't tell you much?
I just ran awrrpt.sql on our datbase, which has about 20 schemas, but each one might only get used for less than 100 queries per day and the report says at the top 0 minutes of DB time. Also most of the categories of report data say "No data exists for this section of the report.".. I can only assume this is due to my level of non-activity?
I guess the good news is my DB is a long ways away from needing any level of tuning :). Are there any recommendations you have to collect data on such a low usage db, or shoudl I just wait until it starts getting some more serious hits? Tks.

Two things about AWR usage:
a) AWR requires extra-cost options: Diagnostic Pack and Tuning Pack (if you want the AWR advisors)
b) Those extra cost options are only available for Enterprise Edition
Everything is there in the Standard Edition, the packages, the tables, even the statistics gathered by AWR are already running after you install it, except that using any of it requires you to be licensed.
Of course you should always refer to your friendly Oracle sales rep who is in a better position to explain the intricacies of licensing.
Oh... one more question.. 842884.1 mentions "if you are licensed to use AWR" ... It was my understanding that AWR was included and licensed with all versions of Oracle 11g. Am I correct?

Is this a bug in APEX 3.0.1 Installation RAC database with RAW device???

Hello,
I am getting the following error when I try to complete approval process.
ORA-20001: Unable to create tablespace. ORA-01
119: error in creating database file '//./FLOW_1.dbf' ORA-27040: skgfrcre: creat
e error, unable to create file OSD-04002: unable to open file O/S-Error: (OS 2)
The system cannot find the file specified.
I checked the alert log for error here is the error in the alert log file.
ORA-1119 signalled during: CREATE TABLESPACE FLOW_1 DATAFILE '//./FLOW_1.dbf'..
and i found the syntax for create tablespace was wrong.
To create a tablespace in RAC with RAW device environment under windows.
it should have forward black slash instead of backward slash "/" without .dbf extension.
so, I changed the syntax i was able to create tablespace through sqlplus.
When APEX tool try to create this tablespace it throws this error..
Old: CREATE TABLESPACE FLOW_1 DATAFILE
'\\.\FLOW_1.dbf' SIZE 10304 K REUSE AUTOEXTEND OFF
EXTENT MANAGEMENT LOCAL AUTOALLOCATE SEGMENT SPACE MANAGEMENT AUTO
error : ORA-01119: error in creating database file '\\.\FLOW_1.dbf'
New:
CREATE TABLESPACE FLOW_1 DATAFILE
'\\.\FLOW_1' SIZE 10304 K REUSE AUTOEXTEND OFF
EXTENT MANAGEMENT LOCAL AUTOALLOCATE SEGMENT SPACE MANAGEMENT AUTO
Tablespace created.
Is it a bug in APEX 3.0.1.??
Is anyone installed APEX in RAC ??
James

Hi,
One observation, Apex is switching the Session ID after one got killed ? I was working on Apex page with browse Item to test open cursor count,
after killing the SID (227) on which the open cursor count was getting increase, it APEX automatically switches to new SID(149) for that session.
Now the problem is even if I have two SID's and one hits the maximum open cursor count, It is not switching to other SID instead the whole application becomes unavailable.
STATNAME SID VALUE USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 74 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 227 325 APEX_PUBLIC_USER Killed
opened cursors current 244 15 APEX_PUBLIC_USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 76 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 244 15 APEX_PUBLIC_USER
Please kindly help in this.
Thanks in Advance
Thanks & Regards
Sanjay
Edited by: user11204334 on Dec 8, 2010 1:02 AM

Anybody using 11g RAC Database with OIM 9.1.0.2?

Similar Messages

Maybe you are looking for