Anyconnect 2.5 and 3.1 on C1841 - Sequence issues

Hi All,
I have been trying to get this right for a while now and can't find documentation or anyone having the same issue, so probably I'm missing something.
Here is the issue: Some clients are using Anyconnect 2.5 due to OS requirements and some other running on Win8 need to connect using Anyconnect 3.1
This is working fine at the moment with the following swquence numbers
#sh run | in install
webvpn install svc flash:/webvpn/anyconnect-win-2.5.3046-k9.pkg sequence 1
webvpn install svc flash:/webvpn/anyconnect-win-3.1.05152-k9.pkg sequence 2
webvpn install svc flash:/webvpn/anyconnect-macosx-i386-3.1.05152-k9.pkg sequence 3
webvpn install svc flash:/webvpn/anyconnect-macosx-i386-2.5.6005-k9.pkg sequence 4
Now if I change the sequence number for 3.1 to be preferred
#sh run | in install
webvpn install svc flash:/webvpn/anyconnect-win-3.1.05152-k9.pkg sequence 1
webvpn install svc flash:/webvpn/anyconnect-win-2.5.3046-k9.pkg sequence 2
webvpn install svc flash:/webvpn/anyconnect-macosx-i386-3.1.05152-k9.pkg sequence 3
webvpn install svc flash:/webvpn/anyconnect-macosx-i386-2.5.6005-k9.pkg sequence 4
users running 2.5 are no longer able to connect to the VPN and the following error shows up
Is there a limitation I am not aware of?
Thank you

AnyConnect 3.1 is a significant upgrade, even over 3.0.
Over 3.0 it adds an enhanced GUI (common between Windows and Mac), NAM enhancement, crypto suite B enhancements, HostScan/Posture performance enhancements, IPv6 support, better untrusted certificate handling, plug-in component tiles, etc.
3.0+ offers IPSec VPN client as opposed to SSL VPN.

Similar Messages

Anyconnect secure mobility and windows 8.1 problem

I installed the anyconnect secure mobility client 3.1.05152 version on a couple o windows 8.1 workstations
on my home network.
There are no restrictions from my firewall towards the outside world.
When i try to connect for the first time i get the certificate message and the login prompt.
After successfully entering the login details the clients connects and i get a message saying that
the vpn clients is getting updated. After that nothing. If finally disconnects and when i try to re-establish
a connection i get the following message:
"The service provider in your current location is restricting access to the internet blah blah blah..."
That is not the case though. Osx vpn client from the same location connects successfully
I have tried removing rebooting, reinstalling the product always with admin rights. every single time the clients connects
the first time and ends up with the same issue.
Anyone knows what is going on?

Is there an older package present and set as the AnyConnect image on the ASA?
If you could share the tunnel-group, group-policy, and any profile (xml file) from the ASA that would assist further troubleshooting.

IPhone 5 iOS 6.1.4 and Windows 7 x64 USB Driver Issues

Been pulling my hair out with this one for the last week or so and haven't had any luck finding anything on the forums or the web regarding a solution short of a full reinstall of Windows 7 which I am not prepared to do at this time; so hoping someone here can shine some light on this for me
I have a iPhone 5 that is updated to iOS 6.1.4 and a recently built Windows 7 64-bit machine. All of my other USB devices function fine (keyboard, mouse, Xbox 360 wireless receiver for Windows, and a Seagate 2TB external USB drive). I've downloaded the most recent version of iTunes, installed successfully and then attempt to plug in my phone to sync. I get the standard Windows *ding* that I've attached a device and 1 of 2 things happens (I haven't been able to determine what causes one reaction to happen versus the other): Windows will successfully install the 'Apple USB Mobile Device Driver' successfully and it will appear under my USB devices in Device Manager. However - iTunes will not recognize the phone and I cannot see it in Windows either. In the 'Devices and Printers' snap-in my iPhone will appear under 'Unspecified Devices' as the 'Apple USB Mobile Device'. The iTunes diagnostics fail to find a connected device so the tests fail. As soon as I unplug the device, the strangest thing happens: Windows will start trying to install a device driver and after a few seconds it will fail stating that the "MTP Device Driver" installation failed because the device was unplugged. iTunes also thrown an error "iTunes cannot connect to this iPhone" throwing error code 0XE8000065 (I've also seen error code 0XE8000085 as well)
After some finagling, I've managed to get Windows to recognize the device under 'Portable Devices' in Device Manager as an "MTP USB Device" using the generic driver. At this point, I've tried updating the driver and manually specifying the Apple USB driver located in the C:\Program Files(x86)\Common Files\Apple\Mobile Device Drivers which updates successfully but then changes the device to "Apple USB Mobile Device" and moves it under the USB Devices in Device Manager; and Windows nor iTunes can see it even still.
I've tried removing iTunes several times and ensuring that all remnants of the installation are gone (registry and folders on the installation drive) and have disconnected all my USB devices short of the keyboard and mouse and still I get the same results. At this point, I'm afraid that a re-install of Windows is going to be the solution; but it's a drastic one (I have a SSD drive where Windows is installed along with all of my games for faster load times/better performance and do not want to have to redownload\reinstall all of them) and I'm not prepared to undertake it at this time, which is why I'm posting here
I've used a utility called USBDeview that sees my phone is connected - so I know from a functional standpoint that my USB ports are good and working. I also know the cable is good too - my daughter's PC (Windows 7 32-bit with NO iTunes) immediately sees the device when I plug it in, installs the drivers, recognizes it as an iPhone and I can then see/browse it in Windows Explorer like I would normally expect. My work PC (Windows 7 64bit, NO iTunes) sees the device just fine as well. I would immensely appreciate anyone that has seen this issue or has any additional solutions I can try.
It's also worth mentioning that I've never used Kapersky antivirus so the UPPERFILTERS value in the registry that I've seen as a solution on some forums is not present on my machine. I'm using Microsoft Security Essentials as my antivirus (no flaming please lol - it meets my needs and is extremely lightweight, which is why I'm using it on a gaming rig) and it's not indicating any issues. I've also tried running iTunes as an administrator (even though my account is a local admin on the machine) and that does not have any effect either.
If there is anything I left out, please let me know; and I thank you in advance!

AphexTwin wrote:
- no Apple input?
Of course not. Didn't you bother to read the TOU of this forum? This is a USER TO USER technical support forum. Apple doesn't post here.

Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them eithe

Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them either failing or not sending at all. Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?

Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced.

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?

I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!

I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?

I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Extreme with shared disk and two users on same mac issue

Hi,
just got my airport extreme + a 1TB hard drive for disk sharing and everything worked great until my wife came home (not her fault )
My setup: I have 1 mac which we both share with two user accounts plus I have a Windows 7 machine. I setup the Airport Extreme drive sharing with 'accounts' as I thought/know this will work with Windows (smb I think) which it sure enough did and I could connect to my share from both my Windows machine and my macbook air and was rather pleased how easy it was.
My wife then came home logged on and she could see the drive and even see the root folder in Finder but saw no files whatsoever and instead of the 'sharing icon' (not sure what to call it looks like a hard disk with wifi signals) she gets a circle with a red bar in it in the finder title... so I disconnected the shared disk in finder and reconnected entering the account details again and things worked for her. I then signed into my account and now I had the same issue... I could see disk but see nothing on it which means I have to disconnect and reconnect etc. etc.
I even setup two seperate accounts now in the AirPort Utility for disk sharing and use one for my account and one for my wifes but the issue remains, by the way no issue on the Windows 7 box.
HELP the whole reason why I got this is so we can share our pictures and videos etc. on 2 machines and 2 computers with 2 accounts.

Yes, I'd like a solution to this one as well! Did you ever find the answer?

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy

Project renames sequence and all clips in the sequence when a clip is added

My project is renaming my sequences and the clips in those sequences whenever I add a clip. For example, I have a sequence called "dance section 2", which contains 20 some-odd clips with various names. When I add a clip named "drop from above", the name of the sequence is changed to "drop from above", and the name of every other clip in the sequence is also changed to "drop from above" (video, audio, stills, everything). When I add a clip named "spins", all the names are changed to "spins".
The name of the sequence is changed in both the timeline and the browser, but the names of the other clips are changed only in the timeline. In the browser, they keep their old names. The exception to this is the last clip added before the name changer. For example, if I add "drop from above" to the sequence, and then add "spins", the clip named "drop from above" is renamed "spins" in the browser as well as in the timeline, but the other clips are renamed only in the timeline.
The clips in the sequence also keep their original content - so the sequence looks the same as it did before, but all the names of the clips are changed.
This is only happening in one project. All of my other projects are working fine.
I've tried restarting and deleting preferences. I've also looked at the autosave vault for the project. The backup projects saved after a certain time all behave the same way, and the projects before that time all behave normally. I can't imagine what would have caused this, though, since I've been working on this project all day and nothing's happened to my computer or hard drive or anything.
Also, there are no freeze frames at the beginnings of my sequences (I read another thread with a somewhat similar issue and getting rid of freeze frames seemed to help that person).
I'm in FCP 7.0 on a Macbook Pro.
Thanks in advance for your help!

Welcome to the discussions...
I've had this happen. My guess is that it's related to round-tripping to/from Color, but I can't be sure. IMHO, the sequence is corrupted. I just dealt with it for a while, then rebuilt it by making changes from an earlier version.
Sorry I don't have a better solution, but at least you know you're not alone.
Patrick

I have a finalized project in iMovie '11. Shared it on Youtube, Facebook, and Vimeo. Then, when I shared it to iDVD, it reverted to a previous version of the project, so my titles and pictures were out of sequence. My final project is now gone!

I have a finalized project in iMovie '11. Shared it on Youtube, Facebook, and Vimeo. Then, when I shared it to iDVD, it reverted to a previous version of the project, so my titles and pictures were out of sequence. Now, in my list of projects, my project is there, but finalized as the previous version which is all out of sequence. My true final project is now gone! What happend?
I didn't notice this problem until after the DVD was burned in iDVD. Then, when I played the DVD in a public setting, I was a bit embarrassed by what played.

Hi
My first thoughts are
• iMovie ill behaving - Trash the iMovie pref file - use to set things right
• in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
Yours Bengt W

HT3529 My phone bill is paid and I can't send or receive msgs and I tried to call Rogers but that doesn't even work and if it was a bill issue I could still call Rogers think it might be software but I would like to know what to do

My phone bill is paid and I can't send or receive msgs and I tried to call Rogers but that doesn't even work and if it was a bill issue I could still call Rogers think it might be software but I would like to know what to do

I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Getting the error message"your apple ID has been disabled" . I reset my ID password last night and am still having the same issue.

getting the error message"your apple ID has been disabled" . I reset my ID password last night and am still having the same issue.

If you are still unable to access your account after resetting your password, you will need to contact iTunes Store Customer Support via http://www.apple.com/support/itunes/contact/

When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE!

"We are currently experiencing some issues, please try again later. If the problem persists, contact customer support" - is anyone else experiencing this and how can I resolve this issue?

I've been trying to download the photoshop free trial for the past three days but instead of installing a message saying "We are currently experiencing some issues, please try again later. If the problem persists, contact customer support" - is anyone else experiencing this and how can I resolve this issue?

try some steps such as changing browsers and turning off your firewall for downloads
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Anyconnect 2.5 and 3.1 on C1841 - Sequence issues

Similar Messages

Maybe you are looking for