Anyone figure out the time zone issue?

Hey Everyone,
I've read about this on some other forums and there seems to be no resolution, nor acknowledgement by VZW or HTC that this is an issue (unless I missed it)
I am in Arizona, and when the time is set to network time, it goes back and forth between Pacific and Mountain (currently an hour difference) and only remain in Mountain when I set the network time myself, but, My Verizon doesnt work unless youre on network time.
I've seen in other forums this is impacting users in NM, AZ and CA.
Pretty essential part of the phone...wonder why it doesn't work.

I just noticed this last night. Was 3am but the phone said it was 2am. What is strange is that in the 4 days I had the phone, I don't think it did that before.
I went to date and time and unclicked the Use network time and set the timezone to AZ instead of Mountain and the time popped back to where it belongs.
Hard to fathom that the towers don't know what state they are in. This is in the Phoenix area so it is not a near the border issue. Until I read this, I didn't know not using network time would prevent anything from working, but I rarely use the VZW tools on the phone.

Similar Messages

Has anyone figured out the video driver issue with tx2000?

my tx2525nr is having issues... the screen works great for a bit then it starts to flicker and or go black, then it locks up and gives me a blue screen of death stating the atimag*.* driver is bad..i heard the issues is with the driver not compatible with win 7. so i changed back to vista premium. well it started again after i did all my updates. but worked fine until then... doesnt anyone know what driver to use?

On your iPhone go to Settings > General > Reset and select Reset Network Settings.
This will erase all wi-fi network settings from your iPhone.
If no change after that, try restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup. This will not prevent you from restoring the iPhone from the most recent backup later if no change after this.
If no change after restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup, your iPhone has a hardware problem with the wireless card or with something else. The iPhone includes a one year warrranty.

Has anyone figured out the deleted documents thing?

I NEED my documents back?! has anyone figured out how to fix this problem yet?

Could you please update to the latest version of Adobe Reader i.e. 11.2.3.
There was an issue on iOS6 due to which App was crashing.
Hopefully updating to the latest version will get your documents back provided you haven't uninstalled the app.
Thanks,
Ankit
Adobe Reader Team

Has anyone figured out the sms:// url scheme yet?

I can't figure out how to prepopulate the body. I've tried sms://nnnnnnnnn?body, message and a ton of other things but none seem to do the trick.
Any ideas?

I don't have time to dig into this, but I presume you have the draft RFC available for reference?

MBM5 - anyone figure out the sensors?

I've been using the latest version of MBM5, and it does work okay (more or less)with the K8N Neo, but the sensors are screwed up.
There are three functional sensors:
Winbond1 - Northbridge - 40c idle, 44 load (listed as "Case")
Winbond2 Diode - CPU - 35c idle, 48-52 load
Winbond3 - ? - 46c idle, 47c load
I'm pretty sure of the NB and CPU sensors, but the third one I don't have a clue what it is.
Winbond3 always runs about 10 degrees hotter than the CPU (Winbond 2 Diode) at idle.
The Winbond2 Diode (CPU) shows fairly rapid temperature change - like an on-chip sensor would. The Windbond 3 remains relatively static in proportion to the rise of the CPU. For example, under heavy load, the CPU temp rose 10 degrees, but the Winbond3 temp rose only 1 degree.
The temps I see appear to be fairly accurate: With an ambient temperature of 70 degrees F, the temps right now idling are 35c CPU, 40c NB. I have a sensor mounted inside the heatsink which reads 29.5c.
MBM5 lists a bunch of other sensors that do not appear to work:
Winbond1 2N2394
Winbond1 Diode
Winbond2
And then three that have what must be incorrect temps (they all read 127c):
Winbond2 2N3904
Winbond3 Diode
Winbond3 2N3904
I also noticed that MBM5 misreported my vcore - at 2.65 volts! Haven't checked the rest of the settings.
Maybe it's all a bios issue?

Huh, that's just the exact opposite of mine. I wonder what on earth Winbond3 is?
And why is it running so hot on mine (in relation to the NB and CPU)?
Any idea what the other 3 sensors (running at 127c) are?
I wish we could get some technical data from MSI on what the actual sensors are. Make it a helluva lot easier to make sense outa all this.

Officejet 8600 pro plus time zone issue

has anyone successfully set the time zone on the Officejet 8600 pro plus? There's a webpage for the device to setup the local date & time - it has a nebulous button to 'set the time zone to the same as you computer' or something like that.. I can't get it to work under Win7 IE or firefox - the printer seems to always be stuck in UTC. That means I have to set the printers local time to UTC to make the timestamps of email scans appear correct. Any ideas? It seems like older officejets had an option to explicitly set the time zone from the device's webpage but that's gone. BTW.. I've upgraded to the latest firmware (v CLP1CN1150CR - 15-feb-2012), but the problem persists.

You should be able to do that via the LCD panel from the printer.
Setup->Tools->Preferences
Setup is in second page after the home screen.
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Has anyone figured out a way to rename a dynamic time series member?

Our client uses trimesters instead of quarters or halfs in their financial reporting. We need to use dynamic time series but do not want to use Q-T-D or S-T-D members because they don't quite make sense to the client. We attempted to rename Q-T-D to T-T-D in the planning app repository unique names table but received an error. Has anyone figured out a way to rename a dynamic time series member or is it just not possible and we will have an alias that doesn't jive with the member name?

I think the option is probably to use an alias, you shouldn't really be trying to hack the planning tables as it is essbase that controls DTS.
Cheers
John
http://john-goodwin.blogspot.com/

Has anyone figured out a way to make the first desktop on Lion/Mountain Lion moveable?

Has anyone figured out a way to make the first desktop on Lion/Mountain Lion moveable? I.e. I can reorder all the other desktops but I can't change the position of the very first one. I just don't use it becasue I am changing the order of my desktops a lot, and it's annoying to not be able to put any other desktop before Desktop 1. Thanks!

or my actual question is -- is there anything inherantly wrong with this approach.. i mean, if i can get it to make it through consistently, is there a problem with it repeating / updating the variable so many times in a row? is it a drain on system resources or can it break anything etc.?
Although I'm far from being an expert in programming, I would answer NO. Imho, you've just got a brillant idea! (As for “repeating / updating the variable so many times in a row”… you could add a short delay (like “delay 1”) inside the repeat block, but I don't think it's a must.)

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this?

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this? I have found GearGrip's LCD harness so that I can do carry-on onto the plane... Or maybe use a Pelican Case to do it as a "checked bag"? Or any other suggestions??! Please help!
Thanks so much!!

I don't recommend you send the iMac in a checked bag. Might get damaged.
Check the airlines website for carry on guidelines.
Or, if you have the original box that the iMac came in, if you have someone who can pick up the iMac for you, send it ahead Fed Ex and insure the package.
Just make sure the display is covered to protect it. A blanket perhaps.
Aloha ...

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far

Anyone figure out how to solve the 1015 error

anyone figure out how to solve the 1015 error

Each version of Photoshop has its own installation path therefore a different application as fars as Wacom Configuration. You would need to set preferences for each Photoshop installed on your system. However if you know XML. Wacom Tablet Preference File Utility can save your Wacom preferences into an XML file. That you may be able to duplicate a Photoshop install and the change the Photoshop Path. Or just change the prion version pathe the the new Photoshop path then restore your Wacom Preferences using the modified XML preference file.
Here you see part of my wacom preferences I have set preferences for all Photoshop installed on my workstation.

TS2446 I can not purchase on ITunes for the first time because I forgot the answer to my security questions, is there a way I can log into my account and figure out the awensers to the questions?

I can not purchase on ITunes for the first time because I forgot the answer to my security questions, is there a way I can log into my account and figure out the awensers to the questions?

Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

If my iPhone was stolen and wiped clean can I figure out the exact time it was wiped and the last GPS location before it was wiped?

If my iPhone was stolen and wiped clean can I figure out the exact time it was wiped and the last GPS location before it was wiped?

Sorry, no.

Anyone figured out a way to use JWS without needing the MIME type preloaded

Anyone figured out a way to use JWS without needing the MIME type preloaded on the client's computer?
Why is it not server-side loading? How can I force a load of JWS and the MIME-type?

when you install web start, the mime type jnlp is associated with WEBstart.
The WEB start home page has code to request an
install if web start is not on the user system.
On the web server, of course you need to specify the association between a
.jnlp file and the mime type. This is in the configuration of the server.
It would be nice if standard ISP's provided that for user directories.
Anyone think AOL would do this?
After all it should not cost anything like installing servlets.

Help! I figured out the problem - sort of.

So I posted my problem two days ago. I found that only some of my pages were loading in Firefox 3. I didn't know why (see below for original posting).
With a little experimenting, I have found that republishing the pages that "work" actually causes them to no longer work. I'm pretty sure I published these pages that worked with previous versions of iWeb. Now that I'm using the latest version of iWeb, any new pages (blogs) cannot be viewed by Firefox 3.
Is there anyone out there with a work around? Solution? Anyone?
HERE IS THE ORIGINAL POST:
HELP- Take a look at my pages- What's wrong?
Posted: Nov 19, 2008 3:19 PM
Reply Email
Here are links to my pages: the first link doesn't load in Firefox 3. The second link loads fine. I can't figure out the difference between the two pages. Any web gurus out there that can determine my problem? I really want people using firefox to be able to view my site.
THANKS!!
LINK 1:
http://web.me.com/reeldamian/DAMIANDP.COMNYO/COMMERCIAL_REEL/COMMERCIALREEL.html
LINK 2:
http://web.me.com/reeldamian/DAMIANDP.COM_NYO/FX/FX.html
Message was edited by: 3pointer

I installed oracle apps 11.5.10.2 using steps given in thread and I didnt have any problems. I then installed it on my friends laptop and it worked fine. but recenly it stopped working in my laptop, i was not able to open login page from main url (http://www.msb.ora:8000) it gave error : page cannot be found
So i reinstalled it on fresh system again.. but since then it not working. I have tried atleast 9-10 times and everytime it ends up with same error "jsp is not responding", I am able to open the rapid install main page but I am not able to open login page. it says page cannot be found. i followed all the steps suggested by you guys in this thread to solve this error, but still have no luck.
I have tried following steps to solve the issue
1) As its recommended to installed apps on fressh os without jdk i did the same, as i didnt worked i tried installation with jdk preinstalled,
2) i have tried on both windows server 2003 and win xp professional
3) I tried to change the jdk path in jser.properties file
I will really appriciate any help to solve this problem. Below is system details:
os: windows server 2003
ram : 1gb
processor: 1.83ghz core 2 duo
Oracle apps 11.5.10.2
java version: 1.4.2_04 ( installed by rapidwiz)

Anyone figure out the time zone issue?

Similar Messages

Maybe you are looking for