Anyone getting this Application Loader problem?

Not sure what's happening here but I am having no joy at all in getting application loader to upload our binary to Apple.
I get any one of the attached errors when trying to upload out 106mb binary.
Anyone had a similar experience.
I also tried creating a new application in itunesconnect and uploading on the web but get an error message then also.
Here's a screen shots:
http://dev1.origincreative.com/applicationloader_error2.jpg
The third error reads:
java.lang.NullPointerException: Unable to create axis service with url https://itunesconnect.apple.com/WebO...seService?wsdl and QName {https://itunesconnect.apple.com/WebObjects/MZLabelService.woa/ws/MZEncodingHouse Service}MZEncodingHouseService: Exception trying to invoke operation: uploadFailed
Guess it looks like a service outage at Apple's end but I have been trying all over the weekend. Interested to see it anyone has had the same issue the past couple of days

Hi and Welcome to the Forums!
Odd...well, perhaps the de-install instructions are different? You can check the RIM KB for a clean uninstall here:
 http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB02206&slic...
Followed by a clean install here:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
Hopefully that'll help.
I have, however, heard of others that have followed the clean uninstall yet had to manually edit their PC registry and manually remove any and all BB/RIM entries...and that got them going. Use that advise at your own risk, of course...
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • HT3939 I got a new computer and need to down load the desktop application to be able to plug my Iphone into for updates. where can I go to get this application?

    I got a new computer and need to down load the desktop application to be able to plug my Iphone into for updates. where can I go to get this application?

    Click Itunes at the top of this page and download itunes.

  • Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

    Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
    I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
    TIA,
    Jerry

    Thanks, Martin.
    Good to hear someone has had success. The lack of it here is frustrating and depressing.
    Thanks again,
    Jerry

  • DataTipFunction  anyone get this to work??

    I am trying to pass in some info using dataTipFunction when I
    create a chart but the object being passed to Javascript is empty.
    Anyone get this to work??
    Eric Haskins

    please define your problem exactly. du you get a compile error? a runtime error?
    please use the code tags, and rename your static member Array to thomething else as a classname.
    kind regards

  • Opening a self serve yogurt shop where you use a scale to weight product and it weight goes to ipad to calculate price. Has anyone seen this application or process?

    Opening a self serve yogurt shop where you use a scale to weight product the weight goes to ipad to cdalculate price. Has anyone seen this application or  process? Please help?

    I understand the inconvenience you are experiencing when working with Office 2013.
    If you have any feedback about Office 2013 product, click the and submit to Microsoft.
    Microsoft will decide how to fix the problem for all customers.
    For the activation mechanism, it intends to protect customers of their rights and interests.
    For a retail version of Office, if it was purchased with a disk, Microsoft account is not necessary during the installation.
    For volume license of Office, refer to the following link to deploy Office suites can be much efficient:
    http://technet.microsoft.com/en-us/library/cc178982.aspx
    For the problem Office 2013 keep crashing, check the following link to check:
    http://support.microsoft.com/kb/2813143/en-us
    http://support.microsoft.com/kb/2758592/en-us
    Thanks,
    Tyor Wang
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no
    help.
    If you have any feedback on our support, please click
    here

  • I have a new Macbook Pro but it does not have iDVD. How can I get this application?

    I have a new Macbook Pro but it does not have iDVD. How can I get this application?

    I have a new Macbook Pro but it does not have iDVD. How can I get this application?
    If you are still within your 15 day return period.  Call Apple they will sent out iDVD at no charge.  (There are no realistic substitutes.)
    Nicely explain that you may return the computer without iDVD. That usually does the trick.  You MUST speak to a senior advisor to get a free copy. The first tier people cannot do it.
    408-996-1010
    800-692-7753
    If that doesn't work you can purchase iLife 11  (includes iDVD) on disk.
    IDVD is a wonderful piece of software and well worth the low cost of $40.
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
    http://dealmac.com/lw/artclick.html?1,527850,1872219

  • Is anyone getting this message when trying to access Yahoo Email?  "Cannot Get Mail, The connection to the server failed?"

    Is anyone getting this message when trying to access Yahoo Email?  "Cannot Get Mail, The connection to the server failed?"

    I have Yahoo mail (POP) account.  Mine is working fine at present.  I do occasionally get asked for password while sending mail.  I have had your issue in the past and it usually clears up in a few hours.  Sometimes I sign out and then back in and it starts working again.

  • How can i install AppRadio application...i am in Tunisia and the application is not found in the Tunisian AppStore...it's essensual for piloting my Pioneer SPH-D01 AppRadio....please how can i get this application ...thanks

    how can i install AppRadio application...i am in Tunisia and the application is not found in the Tunisian AppStore...it's essensual for piloting my Pioneer SPH-D01 AppRadio....please how can i get this application ...thanks

    If it's not available in the store in which you have your account, you're pretty much out of luck. In order to purchase from the U.S. iTunes Store you need a)a valid billing address in the U.S., b) a credit/debit card billed to that address or an iTunes prepaid card purchased in the U.S. and c) to be physically located in the U.S. at the time of purchase.

  • Trying to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package.  A program required for this install to complete could not be run."  Any ideas?

    I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package.  A program required for this install to complete could not be run."  Any ideas?

    This has been fixed.  Answer is that I needed to go to "Apple Software Update" and repair it.  (From my Control Panel).

  • TS3297 "Please contact iTunes support to complete this transaction" anyone get this msg. My acct billing, Internet connection, apple I'd and password are fine

    "Please contact iTunes support to complete this transaction" anyone get this msg. My acct billing, Internet connection, apple I'd and password are fine. I cannot make a transaction

    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

  • The application "Finder.app" can't be opened. Anyone getting this error after upgrade?

    Upgraded to new OS version and getting  "The application “Finder.app” can’t be opened."
    The icon in the tray has a small black dot under it. Not sure whether that is relevant

    Hi ..
    A Safe Mode boot deletes some system caches that may help after an OS X upgrade.
    Top left corner of your screen click the  Apple   > Shut Down.
    After your Mac shuts down, wait 10 seconds, then press the power button.
    Immediately after you hear the startup tone, hold down the Shift key. You should press the Shift key as soon as possible after you hear the startup tone, but not before.
    Release the Shift key when you see the gray Apple logo and progress indicator.
    Once you are in Safe Mode, go back to the Apple  menu. From the drop down menu click:  Restart
    Then try the Finder.
    About Safe Mode.

  • Anyone get this error message when trying to use a pre-installed workflow?

    When I try to use one of several workflows under Photo in Automator I get this error message:
    * -[NSNull length]: unrecognized selector sent to instance 0xa00dc008
    The workflows affected are those with the small feather appearing icon next to it. Don't know which application it refers to. For example: Convert to Profile, Change resolution, Assign Color Profile, Color balance.
    Are these referring to some application that I don't have installed? 'Tis a puzzlement.
    OT

    I think I've found the solution. The workflows that were not working were for Photoshop. Now they are. The fix must have been the 10.5.2 Combo updater as that's the only change I've made that would affect Automator. My PS CS3 installation has not been touched since before the problem started.

  • Can anyone confirm this getPathInfo()= null problem???

    Hey everyone,
              I am still awaiting word from WEBSupport, but I am curious if anyone else
              can confirm this behaviour... I have created a very simple little
              TestServlet class...once it is compiled you simply need to place it in your
              servlet classpath for weblogic.
              You will need to add the following line to your weblogic.properties file:
              weblogic.httpd.register.TestServlet.jsv=TestServlet
              to run it type: http://<server_address>:7001/TestServlet.jsv
              When I run this on my 4.5.1 (SP11) Server I get the expected null problem on
              getPathInfo().
              If anyone can help me out, I am very appreciative :)
              Cheers,
              Sean Hignett
              [TestServlet.java]
              

    Is this STILL an issue? I have recently upgraded to service pack 13 of 4.5.1
              and I am still seeing null returned by this call. Will this ever be resolved
              in
              a future 4.5.1 service pack?
              Craig McElroy
              [email protected]
              Cameron Purdy wrote:
              > I believe that was a regression. I do not know if it has been fixed. I did
              > encounter it in 5.1. The spec says that null is never returned, so it is an
              > obvious bug.
              >
              > --
              >
              > Cameron Purdy
              > http://www.tangosol.com
              >
              > "Sean Hignett" <[email protected]> wrote in message
              > news:[email protected]...
              > > Hey everyone,
              > >
              > > I am still awaiting word from WEBSupport, but I am curious if anyone else
              > > can confirm this behaviour... I have created a very simple little
              > > TestServlet class...once it is compiled you simply need to place it in
              > your
              > > servlet classpath for weblogic.
              > >
              > > You will need to add the following line to your weblogic.properties file:
              > > weblogic.httpd.register.TestServlet.jsv=TestServlet
              > >
              > > to run it type: http://<server_address>:7001/TestServlet.jsv
              > >
              > > When I run this on my 4.5.1 (SP11) Server I get the expected null problem
              > on
              > > getPathInfo().
              > >
              > > If anyone can help me out, I am very appreciative :)
              > >
              > > Cheers,
              > >
              > > Sean Hignett
              > >
              > >
              > >
              > >
              > >
              > >
              > >
              > >
              

  • Force detection using Application Loader - PROBLEM

    I have never had my 8220 flip connected to any computer and it has the JVM 545 error.  I have printed out the directions from this web site on how to do the force however after double clicking the application loader I have 2 options either update or add/remove, and either option gives me the same problem, it cannot detect the blackberry attached (because the battery is out), my only option then is cancel, not okay, so what now?
    Thanks

    Hello Kadscoz,
    I would suggest you try to use the Web-Based software loader as outlined in this post. If this doesn't work, try it on another computer if you have access to one.  It sounds like the computer isn't detecting the BlackBerry.
    cheers,
    -tg
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • HT1203 It jus doesn't work...! Did anyone get this to work?

    I'm struggeling getting this to work: I want to share our music on 4 accounts on 1 iMac (Lion).
    Moved iTuned Media to /Users/Shared, changed the Preferences to reflect this, but the songs don't appear in iTunes.
    Anyone? Please?

    I had the same problem.  Even though it reads like a 2nd alternative, it is actually a continuation of the first step.
    To listen to another account's music files
    Open iTunes.
    From the iTunes menu, choose Preferences.
    Click Advanced.
    Deselect the option to "Copy files to iTunes Media folder when adding to library file."
    Click OK.
    From the File menu, choose Add to Library.Note: Windows users can also choose Add Folder to Library to add a folder of songs.
    In the window that opens, navigate to the location where the other user's music is saved (the iTunes Media folder in this example).
    Click Open.
    Repeat these steps for each account that is listening to shared music.
    When another user on the computer imports new music from CD, repeat steps 6 through 8 to add the music to your library."
    After you do this to each account, everything should work fine.

Maybe you are looking for

  • How To create a message Choice for a page?

    Hi, I need to create a message choice for a page and on selection of that it should navigate me to next page..like ex: If iam havng 10 locations like Delhi,Hyderabad,Chennai.... I need to select one of them and it should be navigated to next page bas

  • Could Not Find XObject named FM_0002

    Hi, I was hoping that someone can help me. I am using Output Designer and Central 5.5. I recently tried to run a dat test through Central consisting of 4 different forms (5 pages in total). The third form was two pages long and when I scrolled throug

  • Targeting a movieclip in an external swf...

    OK, I'm sure there's a very simple solution here, but I can't figure it out. I have a basic file structure where I load different external movie clips into my main file in a placeholder called stage_mc I want to be able to target a clip I named voice

  • When will Adobe CC be available for the Android OS?

    I own an android tablet(Samsung Note Pro) and I am a paying CC subscriber who would like to use Adobe CC on my tablet.

  • WeBoost cell phone signal boosters could help your reception

    Maybe it's Murphy's Law, but dropped calls usually happen at the most inopportune times. An important or engaging conversation cut short by a sudden drop in reception can be annoying-even more so if it happens with any sort of regularity. Cell phone