Anyone has a problem with their iMac staying on the APPLE logo?

Anyone has a problem with their iMac staying on the APPLE logo?

Would you elaborate please.....
staying on what Apple logo?

Similar Messages

  • Has anyone had a problem with their imac because the power company installed a smart meter which broadcasts the readings to the company?

    Has anyone had a problem with their imac after the power company--in my case Pepco in Washington DC--installed "smart meters" which read the meter and transmit the data via wireless?  I've had trouble and when I move the imac downstair it disappears. Help!

    barryfromwashington wrote: 
    would putting up a metal shield by the meter help?
    It might, as long as the shield is grounded. Metallic (such as copper) window screen is often sufficient.
    As mentioned, it would not hurt to file a complaint. The burden of proper shielding should probably belong to Pepco. Among other things, the FCC frowns upon RF leakage and its interfereing with radio communications. Besides, Pepco probably would not want you to affix a shield around their gear - liability issues, etc.
    You could experiment by temporarily hanging a shield-screen on the inside of the wall, behind where the meter transmitter device is located, and see if there is any beneficial change.

  • I'm wondering if anyone else has had problems with their imac fans being extremely loud when running at slow speeds?  When the computer heats up enough for the fans to run at higher speeds they quiet down. New HD fan was just installed.

    I have an imac that I've had for a couple years.  The fans have always been loud when running at the slower speeds.  When the computer heats up enough for the fans to run at a higher speed the fans quiet down.  I had installed SMC fan control after multiple attempts with Apple to get the fan issue resolved.  That seemed to keep the fans quiet enough.  I've never had a problem with overheating.  Recently the fans were becoming loud again even running at the slightly higher speeds so I took it to my local Apple store and they replaced the hard drive fan.  I got it back and it's now as loud or louder than ever!!  And, now SMC fan control won't "stick."  The fans will speed up, but then gradually go back to the lower "loud" levels.  I'm at a loss as to what to do next. 

    Thanks jared,
    I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
    So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
    Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
    For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

  • Does anyone has had problems with cracks and damage to the trackpad?

    is my first time with apple. I expected more quality, but my computer has presented cracks in several parts so inexplicable and never dropped, besides the Trackpad does not work well. I am disappointed

    Contact Apple using expresslane.apple.com if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the MacBook in to an Apple retail store or service provider to ask for an estimate.

  • Has anyone else had problem with their speaker on a macbook pro when on the internet?

    has anyone else had a problem with their speaker while on the internet like youtube on a macbook pro?

    Please make a Genius Appointment and take it in for service. It's under warranty.

  • Has anyone had any problems with their charger blowing out?

    Has anyone had any problems with their charger blowing out? mine blew, there's now a charred pin on the charger and in the socket of the macbook. The plastic around the charge socket is also cracked & distorted from the blow-out. It wasn't a power surge as no other electrical items were affected. It wasn't liquid or dust, as I'm the only person who uses it & I'm very careful. I'm concerned that the consequences could have been terrible. I wasn't present when it happened though, I can just see the evidence after the event.
    I have a mid 2010 13" Macbook running the latest software & use the original magsafe charger that came with it.
    Will I have to fork out for a costly repair or is there a safety issue that Apple will sort out for me?
    Any advice would be much appreciated.

    Everything in the box with iPhone is covered by the iPhone warranty ,go  to Apple genius bar before warranty expires

  • HT1338 has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    Have you tried calling Apple tech support?
    http://www.apple.com/contact/

  • Is Anyone else having problems with their I MAC 24" Foggy display?

    Is anyone else having problems with their I MAC 24" having a foggy display in lower right hand corner after the computer has been on for 30 or 45 min? This is now the 2nd computer that has this same problem. Just wondering if anyone else is having this issue with the IMAC 24"? Does anyone know what might be the cause? I have only had the computer for a month. Thanks very much.

    Thank you for the nice welcome.
    Sorry about posting in the wrong area I found the correct discussion board. http://discussions.apple.com/thread.jspa?messageID=7998535#7998535
    Its seems that I am not alone in my problem but I do have good news to report that apple support has acknowledged the issue is happening and a fix is in the works. The support and assistance I received today helped greatly to restore my faith in apple product satisfaction.
    Lets hope you don't have this experience in the future, hopefully a solution can be reached that is in everyone best interest. I may have to drive a greater distance to another apple store but for myself and others like me feel its worth the extra effort to get better customer service in the long run.

  • Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

    Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

    I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.

  • Just wondering if anyone has a problem with accessing iTunes store. have iTunes installed but can't bring up the store home page?

    Just wondering if anyone has a problem with accessing iTunes store. have iTunes installed but can't bring up the store home page?

    i have the same problem! Safari won't work either. Can anyone help please? I have completely restored my computer trying to fix this and it still won't work! I have a 2 month old alienware laptop running windows 7

  • I replaced my 2010-2011 iMac internal HD i dont have an install disk i created one with my external HD but when i go to install lion onto my imac it stays at the apple logo screen.HELP ME PLEASE!

    I replaced my 2010-2011 iMac internal HD i dont have an install disk i created one with my external HD but when i go to install lion onto my imac it stays at the apple logo screen.HELP ME PLEASE!

    Boot from the original Install disc that came with the computer and then format the drive Mac OS Extended (Journaled) using the GUID partition. Then  you can re-install OS X. If you no longer have the original media call AppleCare with the serial number of the machine (look on the bottom of the stand) and for a nominal fee they will ship you replacement media.
    The chances are very good you will have fan problems if you used an off-the-shelf HD, beginning in 2009 Apple began using HD's from vendors that incorporated heat sensors into the HD. If you did not buy the same type of HD your computer will think the HD is overheating causing the fans to run at full speed.

  • HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update.  Have there been problems associated with this update ?

    OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update.  Have there been problems associated with this update ?

    I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

  • Is anyone else having problems with there phone freezing after the 8.0 update?

    iis anyone else having problems with there phone freezing after the 8.0 update??

    Hello Chefboyharley,
    Thanks for the question. After reviewing your post, it sounds like the phone is unresponsive. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Not responding or does not turn on
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I have updated my Macbook pro to mavericks since yesturday it has been running none stop with a gray screen and the apple logo in the medle

    I have updated my Macbook pro to mavericks since yesturday it has been running none stop with a gray screen and the apple logo in the midle. Does anyone has incounedt that same of problem? Please help. Thank you in advance.

    The startup disk may need repairing ...
    Startup your Mac while holding down the Command + R keys.
    From there you should be able to access the built in utilities to repair the disk and restore OS X using OS X Recovery

  • My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

    hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
    I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
    (i correctly got out of dfu mode after the downgrade)
    i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
    i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

    Anyone have any suggestions? or is everyone else just as clueless as me !

Maybe you are looking for

  • Oracle forms & reports support on oracle 10g lite

    Currently our oracle forms & reports 6i application works on oracle 8i database with oracle 9i lite. We upgraded our database to oracle 9i r2 and lite to 10gr2. After publishing the application when i try to open the application the forms screen disa

  • Assign Multiple equipments to WBS element

    Hi all, Can anybody tell me how to assign mutilple equipment to single WBS elements. As far as i know we can assign only one equipment to WBS element. My requirements is to assign more than one equipment to particular WBS elements. How should i do? P

  • HP Officejet 7500A Wide Format e-All-in-One Printer - E910a

    HP Officejet 7500A Wide Format e-All-in-One Printer - E910 scaner & copy not workser:-MY4C8510F9 

  • Help! My phone is stuck in recovery mode when updating!

    My iPhone 4 is stuck in recovery mode.  I see I can press "restore" on itunes but it says it will wipe my phone clean of all pictures etc.  I don't want to lose everything! Help! Is there a way around this where I won't lose everything?

  • Running forms 10g from a discoverer ias installation. Is it possible?

    Hi, I want to run an application based on forms 10g using an iAS 10.1.2 that is actually been used to run Discoverer. In the iAS directory structure I can't find the "forms" folder or any of the configuration files (formsweb.cfg, default.env, Registr