Anyone have experience using high-res files (eg line art) in Aperture?

As I found at http://discussions.apple.com/thread.jspa?threadID=1741287&tstart=0 it seems that Aperture will choke on files over a certain size. I'll grant, I tried something that is outside the scope of Aperture---I tried using it to store a workflow starting with a scan rather than a photo. The scan is higher resolution than most digital photos (as line art must be).
Does anyone have any experience with high-resolution photos or scans? I'm talking over a hundred MB, possibly upwards of a gigabyte. These are precisely the sort of files that I want to create lower-res versions for specific applications and have them be linked to the master file.

I tried to use Aperture with my line art scans in the early versions of Aperture, but gave it up because Aperture did not seem to handle the file size.
Instead I use another workflow for my artwork, Bridge, Photoshop, Illustrator and Version Cue in combination with Extensis Portfolio. This is a very pleasing solution for me and I would recommend it to others to try out as well.
For me, Aperture is used for managing and adjusting my photographs.
Regards
Paul K

Similar Messages

  • RE: (forte-users) Does anyone have experience using OracleLarge Objects

    hi ,
    A few months ago, I tried a oracle stored procedure with a BLOB parameter,
    but Forte(3.l2) could not recognize the blob variable. I used oracle 8.0
    hth
    suma
    -----Original Message-----
    From: Amin, Kamran [mailto:kamran.aminlendware.com]
    Sent: Thursday, March 29, 2001 2:40 PM
    To: 'Forte User Group'
    Cc: Magaliff, Bill
    Subject: (forte-users) Does anyone have experience using Oracle Large
    Objects (LOB's)?
    Does anyone have experience using Oracle Large Objects (LOB's) -
    specifically the CLOB datatype? Forte supports Oracle LONG's but given that
    Oracle is going to phase out that datatype and they're trying to push users
    towards CLOB's instead of LONG's, I want to find out if Forte can handle it
    and, if so, what we should know about mapping Forte datatypes to the Oracle
    CLOB. [Their compatibility matrix for v3.5 indicates suppport under Oracle
    8.1.x, and CLOB's were introduced back in 8.0.x - but the word from Forte is
    that they currently don't support it.]
    thanks in advance.
    ka
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

    Hi,
    Did you get any solution to this. If yes, please share.
    Thanks,
    Tints

  • HT204380 Does anyone have experience using wifi ipad mini in Kazakhstan?

    Has anyone had experience using the ipad mini wifi in Kazakhstan?
    If so, any suggestions or comments as to Face Time use, settings, apps, VPN, are much appreciated.
    Thanks!

    These cables do not work. I have one myself that I thought I would try, basically VGA ports transmit an analogue signal, HDMI carries digital signals. You would need a powered convertor where you can plug in VGA, the box does the magic and outputs HDMI. These claim to do the trick:
    http://www.tvcables.co.uk/cgi-bin/tvcables/vga-to-hdmi-converter.html
    I have no association with tvcables.co.uk or the manufacturer of the box, but you should look for something like this, it carries your audio too.

  • Anyone have experience using ALE message FIDCC2 in a high volume scenario?

    Hi,
    We are evaluating the use of message type FIDCC2 to send complete FI documents from one SAP system (logisitics) to another SAP system (finance).  I'm particularly interested in throughput performance, as this will be a high volume scenario (300K+ docs per month).  Additionally, each SAP system has a customer include code block extension (CI_COBL) to BSEG, that will be carried via an IDOC enhancement (custom segment), for which we are considering using XI to map the IDOCs between the two systems.  I would appreciate any info you can share regarding use of FIDCC2 in a high volume scenario.  Thanks in advance.
    Regards,
    - Allen

    Hi Allen,
    In my past experiences, I used the message variant (EDIDC-MESCOD) and message function (EDIDC-MESFCT) to execute multiple inbound IDoc jobs to run parallel  for a given message type and IDoc type (execute program RBDAPP01 in different application servers).
    I used message variant and message function to group all sales order IDocs based on location and customer numbers. 
    You need to enter message variant and/or message function during partner profile setup (WE20). Also the middleware system (i.e. SAP XI) must maintain the above fields accordingly for IDoc inbound processing.
    Hope this will help.
    Regards,
    Ferry Lianto

  • Anyone have experience using CS5 in Yosemite?

    I have CS5, not 5.5, and this is the creative suite purchased. It is woking all right for me in Maverick on a Macbook Pro. Has any one tried using this version in Yosemite? I realize that there will be a point where it no longer works, but I don't use it enough to rent it each month. So trying to plan ahead.
    Thanks for any information.
    — Richard

    What I figured. Here is my problem:
    I am slowing down in my teaching but have quite a few files in the InDesign format and would want to use them as an archive of course. But I am using ID now very infrequently because, as I say, not as active as before (semi-retired). It is difficult for me to justify subscribing to ID with so little use of it, but my apparently unrealistic desire is to be able to access these older files at times. So this is sort of an odd dilemma for me. I mean if I have old Word files I can convert them to rtf, or open in Pages so not a problem. But what do I do with these ID files? Maybe there is some sort of conversion program out there? But I doubt it. It doesn't feel right to me to have to subscribe at a continued cost as my only choice in this situation. Well, no real answer I suppose, but thanks for your input.
    — Richard

  • Does anyone have experience using MS Visual Web Designer 2008 VB?

    I've created a webservice that accepts a single input (ID number) and returns data from a table. It's written in VB. My question is what do I return so I can see the fields in Designer data connection?
    Right now I'm returning XML in an object so all I see is webservice result,
    A string gives me the same thing. When I try to return XML or XDocument I get an error on the webservice. There was no help in the MS knowledge base that I have found so far on the error.
    I tried to use the returned string by adding it to the data structure using:
    xfa.datasets.data.loadXML(xfa.resolveNode("form1.#subform.xmldata").rawValue
    ,FALSE,FALSE);xfa.resolveNode("form1.#subform.TextField4").rawValue
    = xfa.datasets.data.saveXML();
    for (var i=0; i < len; i++){
      app.alert("adding " + theDataGroup.nodes.item(i).nodes.item(0).value + " to the DD list");
      //DropDownList2.addItem(theDataGroup.nodes.item(i).nodes.item(0).value);
    from this example:
    xfa.datasets.data.loadXML(xml_result.rawValue, false, false);
    xml_result.rawValue = xfa.datasets.data.saveXML();
    var theDataGroup = xfa.resolveNode("xfa.data.people");
    var len = theDataGroup.nodes.length;
    for (var i=0; i < len; i++){
      app.alert("adding " + theDataGroup.nodes.item(i).nodes.item(0).value + " to the DD list");
      DropDownList2.addItem(theDataGroup.nodes.item(i).nodes.item(0).value);
    on a button click event to see what I get but nothing happens even when I paste xml into the xmldata field.
    What am i missing?

    You have no choice but to return the XML as a string and then load it into the data dom. Are you getting the XML returned to the field? The manipulation of the data in the dom can be tricky....can you send the form and the data file that is returned to [email protected] and I will have a look when I get a chance.
    paul

  • Anyone have experience using EJB with spring?

    I'm getting this totally useless stack trace trying to test a simple query through EJB:
    WARNING: JBO-29000: Error injecting reference; nested exception is: java.lang.InstantiationException: Error injecting reference
    oracle.jbo.JboException: JBO-29000: Error injecting reference; nested exception is: java.lang.InstantiationException: Error injecting reference
    Then I made my own LifeCycle class to get a better stack trace. It was better, but it didn't help much...:
    ## Detail 0 ##
    javax.ejb.EJBException: Error injecting reference; nested exception is: java.lang.InstantiationException: Error injecting reference
    java.lang.InstantiationException: Error injecting reference
         at com.evermind.server.DependencyManager.resolveDependencies(DependencyManager.java:157)
         at com.evermind.server.ejb.LifecycleManager.postConstruct(LifecycleManager.java:98)
         at com.evermind.server.ejb.StatelessSessionBeanPool.createContextImpl(StatelessSessionBeanPool.java:40)
         at com.evermind.server.ejb.BeanPool.createContext(BeanPool.java:418)
         at com.evermind.server.ejb.BeanPool.allocateContext(BeanPool.java:244)
         at com.evermind.server.ejb.StatelessSessionEJBHome.getContextInstance(StatelessSessionEJBHome.java:25)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:86)
         at CmMetaServiceEJB_LocalProxy_4j6m9m9.queryMetaObjectFindAll(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at oracle.adf.model.binding.DCInvokeMethod.invokeMethod(DCInvokeMethod.java:507)
         at oracle.adf.model.binding.DCDataControl.invokeMethod(DCDataControl.java:1795)
         at oracle.adf.model.generic.DCGenericDataControl.invokeMethod(DCGenericDataControl.java:248)
         at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:219)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1289)
         at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:1802)
         at oracle.adf.model.generic.DCGenericDataControl.invokeOperation(DCGenericDataControl.java:266)
         at oracle.adf.model.adapter.AdapterDCService.invokeOperation(AdapterDCService.java:305)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:627)
         at oracle.jbo.uicli.binding.JUMethodIteratorDef$JUMethodIteratorBinding.invokeMethodAction(JUMethodIteratorDef.java:160)
         at oracle.jbo.uicli.binding.JUMethodIteratorDef$JUMethodIteratorBinding.initSourceRSI(JUMethodIteratorDef.java:542)
         at oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1436)
         at oracle.adf.model.binding.DCIteratorBinding.getRowSetIterator(DCIteratorBinding.java:1420)
         at oracle.adf.model.binding.DCIteratorBinding.setRangeSize(DCIteratorBinding.java:2703)
         at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:2487)
         at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2260)
         at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:99)
         at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareModel(FacesPageLifecycle.java:72)
         at oracle.adf.controller.v2.lifecycle.Lifecycle$8.execute(Lifecycle.java:210)
         at oracle.adf.controller.v2.lifecycle.Lifecycle.executePhase(Lifecycle.java:116)
         at oracle.adf.controller.faces.lifecycle.ADFPhaseListener.mav$executePhase(ADFPhaseListener.java:29)
         at oracle.adf.controller.faces.lifecycle.ADFPhaseListener$4.after(ADFPhaseListener.java:327)
         at oracle.adf.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:90)
         at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:254)
         at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:213)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
         at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
         at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
         at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.IllegalArgumentException
         at sun.reflect.UnsafeObjectFieldAccessorImpl.set(UnsafeObjectFieldAccessorImpl.java:63)
         at java.lang.reflect.Field.set(Field.java:656)
         at com.evermind.server.deployment.InjectionField.inject(InjectionField.java:46)
         at com.evermind.server.DependencyManager.resolveDependencies(DependencyManager.java:154)
         ... 57 more
    does anyone know how I can get a better stack trace with reference to my own files?

    Please refer
    http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/how-to-ejb30-jpa-spring/doc/how-to-ejb30-jpa-spring.html

  • Does anyone have experience with using a Canon Vixia HF M52 Camcorder with Final Cut Express?

    I'm looking to purchase a new camcorder that is compatible with my Mac OS X (10.6.8) that will work well with Final Cut Express 4.0.1  I have downloaded the camcorder support info from Final Cut Express that list many capital camcorders.  I've used Sony tape based camcorders in the past.  I'm looking for High Definition.  I can stick with a tape based camcorder, but thought I would look at the Canon Vixia HF M52 as an alternative, which is listed as compatible.  I would like to download directly from the camera to FCE.  I film in the wilderness, like having an optical zoom of 20 or greater (yes, I use a small tripod). Does anyone have experience with the Canon Vixia?  And if not, but you really like another camcorder that you can recommend, what is it?

    The Vixia HF M52 is an AVCHD camcorder and should work perfectly fine with Final Cut Express 4 (4.0.1).
    The published "camcorder support list" has never been up to date and I would not take it to be a definitive list of compatible camcorders.
    One note, however, the Vixia HF M52 supports a number of different shooting modes.  I suggest sticking with the AVCHD 1920 x 1080i / 60 fps mode for use with FCE.   FCE does not support progressive modes except in 720p25/30 (which the M52 does not seem to shoot anyway); nor does FCE support any 24 fps modes.

  • TS1926 "Monitors cannot be used bcz a required extension, System Monitor Plugins, is disabled or not installed. Make sure System Monitor Plugins is in the Extensions folder in the System folder then restart your computer" Anyone have experience with this

    "Monitors cannot be used bcz a required extension, System Monitor Plugins, is disabled or not installed. Make sure System Monitor Plugins is in the Extensions folder in the System folder then restart your computer" Anyone have experience with this issue?

    Try this app: http://tyorex.com/iWorkConverter
    Batch convert Pages files to doc and pdf.

  • Does anyone have experience with unzipping a password-encrypted ZipFile??

    Does anyone have experience with unzipping a password-encrypted ZipFile??
    My Zip Class works fine with every unencrypted file, but when I try to open an encrypted one, i get an error Message ("Encrypted ZIP entry not supported")
    Is ist impossible to unzip encrypted ZIPs???

    I've searched around a little bit and THIS IS THE SOLUTION!
    There is a (beta)version of winzip8 that uses a cli (command line interface)
    So, all you have to do is to implement a Runtime.getRuntime().exec(...) in your java program to call winzip8 and pass the zipfile path and the password.
    Here's the URL: http://www.winzip.com/wzcline.htm

  • Photoshop cs6 won't allow me to highlight my existing text layers. Does anyone have experience with this problem?

    Photoshop cs6 won't allow me to highlight my existing text layers. I select the text tool and the text layer I want to edit, hover over text and each time I attempto to edit a new layer is created. Does anyone have experience with this problem?

    Be sure you go to Adobe's Web Site and make sure there are no Updates for CS6
    http://www.adobe.com
    Remember if you have trouble with a software issue it is the software and not caused by the Mac you are using
    Many users simply don't remember when you upgrade software you normally have to go to 3rd party web sites and update software as well.
    Cheers
    Don

  • Does anyone have experience selling or giving away their Nano?

    I'm considering selling my Nano and hope to replace it with a Touch. My question is, what do I need to do before selling the Nano to a buyer? Do I need to do any preparation?
    What does a buyer need to do to make a used Nano his? Can I just give him the Nano and say download iTunes? Do I need to "release" the Nano in some way?
    Anyone have experience with this?

    Do you really want to give your buyer some games from iTunes?!?
    But maybe that's not such a bad idea, the buyer might be more likely to buy your iPod if games are on it, but if you give him your iPod the games will be synced over, and erased. Select +"Enable disk mode"+ and drag-and-drop your games from iTunes onto it. Then he can drag the games to his own iTunes library.

  • IPhoto downloaded photos into an event and now they don't show up. They were deleted off the camera under the assumption they were in my library now I don't have anything.  Does anyone have any useful advice?

    I downloaded photos from my camera to iPhoto 11.  They were accepted as a new event.  I deleted off the camera disk.  Now, after going back into the events folder, the photos are not there. Does anyone have some useful advice? I've lost about 200+ photos...

    You can recover the shots from the Card with an app like MediaRecover
    As for the Library:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Does anyone have experience with Virgin or Boost Mobile?

    I have been with verizon for a long time...I have 4 lines with this service. I have since bought several phones off of craigslist or ebay just so I wouldn't have to be subjected to the tier plan. We use so much data it's crazy. I want the new Samsung Galaxy S4 so bad!!! Grrr! I've even thought about switching to Virgin Mobile or Boost Mobile. We pay so much for our phones now and I know of one guy who has boost mobile and loves it. Does anyone have experience with these providers?

    BC's CRM is part of the package, Salesforce is of course more dedicated. That pretty much sum's up these sorts of use cases.

  • HT1689 Does anyone have experience downloading audio books while in Europe from a U.S. account?

    Does anyone have experience downloading audio books in Europe using a U.S. account?

    The terms of the iTunes Store state that you agree not to use or even attempt to use the US iTunes Store from outside the US. Sorry, then, but we cannot discuss that issue here.
    Regards.

Maybe you are looking for