Anyone know how to get pdf files to print on Mac

anyone know how to get pdf files to print on  a Mac. When i bring pdf file up and press print a box comes up saying cannot print. When i press that one another comes up saying no pages selected. Everything up to date, rebooted, checked to make sure plugins are there and up to date.

Might not be exactly what you want and I haven't had time to fully investigate this but take a look at http://www.hanynet.com/waterroof/

Similar Messages

  • Does anyone know how to compress .pdf files to share?

    I put together a 4 page document in Pages but it is almost 1.7 MB - yikes! Anyone know how to get it smaller?  It has a lot of photos, which I'm sure are the culprit.  If I knew how to make them smaller, I'm sure I'd be on the right track!  

    In todays world a fle of 1.7 Mega Bytes isn't that big. That's about the same size of a small JPG file from a standard camera.
    How do plan on sharing it? Emailing it? you should have no problem emailing a file of that size.
    Sorry I don't know of a way to compress a PDF unless you ZIP it.

  • HT3775 Does anyone know how to get .mts files and mpg files to work in final cut express?

    I am trying to import footage from a cannon xa10 but it wont come up in final cut express. The only files I have managed to get off the sd card are either .mts or .mpg files and these won't import into final cut. Any suggestions?

    Barney & cjnz11, are you importing AVCHD lite?
    FCE doesnt play nice with AVCHD lite with the Standard plugins, imovie on the other hand does (go figure) there is a fix for this.
    1. Open the Final Cut Express.app by right clicking the icon and choose 'show content'. At Contents/Plugins you find a folder called: "AVCHD.RADPlug". compress this and keep it safe (Just incase)
    2. Now Open the iMovie.app by right clicking the icon and choose 'show content'  At Contents/RADPlugins there is a folder called "AVCHD.RADPlug". Copy that folder to where you found the folder with the same name inside the Final Cut Express.app
    After that you will be able to Log & Transfer AVCHD Lite with in FCE instead of the imovie import and XML export method.  

  • Hi, I'm having issues with my airdrop. I have looked in my finder perfrences and didn't see the check box for airdrop. I have a macbook air running on 10.9.4 Mavericks. Does anyone know how to get my airdrop back? Thanks.

    Hi, I'm having issues with my airdrop. I have looked in my finder perfrences and didn't see the check box for airdrop. I have a macbook air running on 10.9.4 Mavericks. Does anyone know how to get my airdrop back? Thanks.

    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

  • Does anyone know how to get a preflight file signed by apple for the 21 mac

    does anyone know how to get a preflight file signed by apple for the 21 mac

    im trying to get a hold of them to see if they can deauthorize a computer. I am unable to do it because i can't get the internet to hook up. And i got a new laptop that i get the internet on but i can't authorize it unless i deauthorize the other one. i've called apple 3 times and theyve not been very helpful saying i need to get  hold of itunes.

  • I had to manually download the new version of itunes.. via tools, it gave me 4 items to download and i did not download all 4 compenants.  Does anyone know how to get back to the pop up that contains tools so i can redownlaod all of them.

    I lost my old iphone and have a new 5s.. i need to sync to itunes.  i had to donwload manually via tools but i didnt download all four files.  now when i plug my phone into itunes it says there is an error bc i didnt download all the files.  so when i go into itunes now and check for updates it says its up to date.  the problem is with the phone support file i didnt download. 
    Does anyone know how to get back to the pop up that has the music player update and itunes update bc this is the only place i have seen "tools" to be able to manually update all four files....
    ***IF i completely uninstall itunes and reinstall will it still have all my songs, photos, apps etc... bc i need to sync my new phone to get all my stuff back

    this is a follow up from the profane post earlier....
    i have done this twice in two other posts..
    here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
    the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
    so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
    so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
    so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

  • I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

    I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
    I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
    The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

    The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
    So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
    As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

  • Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this?

    Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

    As posted previously:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    If installing Leopard the process is similar in some respects.  If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button.  To install over an existing system do the following:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Does anyone know how to save a file in CC 10.0 or higher that is viewable in CC 9.2?

    I am trying to make my fiels viewable to someone who has Adobe CC version 9.2, but I have version 10.0. Does anyone know how to save my files so the are readable?

    You will likely get better program help in a program forum
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Anyone know how to get back the icons in that download tab?, Anyone know how to get back the icons in that download tab?

    My icons in that download files thing is gone. Anyone know how to get it back? Thanks!
    http://i1179.photobucket.com/albums/x385/Claused/ScreenShot2013-03-31at114810PM_ zpsae5a9824.png

    You could try booting into your Recovery partition (holding down the Command and R keys whilst booting) and use Disk Utility to verify and, if needed, repair your hard drive. If everything seems to be OK, you can reinstall OS X - just a 'fresh' install, it won't hurt your data (though it's always a good to backup your data) and it may fix the problem.
    Clinton

  • Anyone know how to get a copy of a IBM 7845I2 Recovery Disk?

    Anyone know how to get a copy of a IBM 7845I2 Recovery Disk?, My multipoint switch is stuck in read only mode -  Please use Recovery Disk to check the file system using fsck.

    Hello Elizabeth,
    Did you read the title of my post?  I am simply asking if anyone knows how to pull a history of repair records.
    This page https://www22.verizon.com/secure/pages/requestrepair/ clearly states "You can view a history of past repair requests." Unfortunately, I cannot find anywhere on that site where one can do that. So, I am asking for user to user help on finding out how to gain access to that information.

  • Mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone.  Does anyone know how to get them to play on iPads/iPhones?

    mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone.  Does anyone know how to get them to play on iPads/iPhones?

    You have to make sure they are fully compatible with iPad
    Video formats supported:
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Does anyone know how to get this baby...

    Does anyone know how to get this baby back to how it was when it left the Apple Store? I think I've made some errors moving some stuff from my old computer and just want to start all over again... Like when I first booted it up out of the box.

    Insert the Install DVD 1 that came with your baby, reboot with the c key held down. When the installer launches, select Erase & Install. (The Archive & Install option will preserve your data, but also most likely some of the problematic files.)

  • HT2490 does anyone know how to get my 'google' page back when I click on safari- it was always there and now comes a panel of panes with my 'top sites'- it is so aggravating...

    does anyone know how to get my google page back when I open safari??.... it is gone and I get a full page of 'top sites' instead... it is so frustrating! appreciate the help if anyone knows!

    Safari preferences / General tab

  • DOES ANYONE KNOW HOW TO GET PASSED MY PASSWORD LOGIN on a mac pro? I FORGOT IT. (yosemite 10.10.1)

    DOES ANYONE KNOW HOW TO GET PASSED MY PASSWORD LOGIN on a mac pro? I FORGOT IT. (yosemite 10.10.1)

    User Tip:  Reset the user password in OS X Lion, Mountain Lion, Mavericks and Yosemite
    Posting in CAPS LOCK Is often seen as screaming and is not appreciated.  It's also very hard to read.

Maybe you are looking for

  • Bug report for picture attachment - mail for exch...

    Mail for exchange is a great email software ,I denpend on it very much . Recently , I found  there was a big problem in some situation : When  a mail content was pasted a lot of pictures(not attached with files),It was opened very slowly,I alomst cou

  • Customer vender ofsetting

    hi i have a customer who is my vendor vice versa . i would like to know how to clear or ofsett it and want to know if there is any steps. i have assigned details in the customer master and vendor master. the balance in both the customer and vendor is

  • How Do I Update My 820 to the BLACK update

    Today I brought a 820 second hand. (I had a 720, but smashed the screen) The phone had a factory reset. I tried to update the software, using the phone update option on the phone, its downloaded and installed 2 updates....but cant get it to update to

  • Dynamic menu in AS3

    I would like to create in AS3, something like, it's in AS2 //_root var menuArray:Array=new Array("menu0","menu1","menu2","menu3","menu4","menu5"); var gap:Number=10; var xmenu:Number=10; for (var i:Number=0;i<menuArray.length;i++){     this.attachMov

  • EXTPROC security with Oracle 9i  ?

    Hi I would like to know if ther are any look holes with using EXTPROC in oracle 9i. I have been told by the DBA in my organisation that they do not allow extproc due to security issues. We do not allow extended procedures using EXTPROC in Oracle, thi