Anyone know how to get to the security screen with a " Crashed" phone?

Getting the message "Restore Needed" but it says I can't connect with my Iphone because my phone has a security code. I can't get to the Security code screen on the phone. Anyone know how to get to the security screen with a " Crashed" phone?

Restore the phone on the same computer it was last synced to and it will not require the unlock code.
If you don't have access to that computer you will have to use Recovery mode, which will wipe all content. See: http://support.apple.com/kb/HT1808

Similar Messages

Anyone know how to get back the icons in that download tab?, Anyone know how to get back the icons in that download tab?

My icons in that download files thing is gone. Anyone know how to get it back? Thanks!
http://i1179.photobucket.com/albums/x385/Claused/ScreenShot2013-03-31at114810PM_ zpsae5a9824.png

You could try booting into your Recovery partition (holding down the Command and R keys whilst booting) and use Disk Utility to verify and, if needed, repair your hard drive. If everything seems to be OK, you can reinstall OS X - just a 'fresh' install, it won't hurt your data (though it's always a good to backup your data) and it may fix the problem.
Clinton

How do I turn on my ipad, I just got it and I don't know how to get to the home screen. Also, is itunes free on the ipad

How do I turn on my ipad, I just got it and I don't know how to get to the homescreen. Everytime I turn it on there is a black screen, the white charger, and the blue itunes circle. Also, are itunes free.?

You must activate the iPad within iTunes on your computer. Make sure you have the latest version of iTunes on your computer (read the minimum requirements for the iPad printed on the iPad box) and connect the iPad to your computer with the supplied cable to a 2.0 USB port - not a port on a hub- a port on your computer. iTunes should start and take you through the process.
iTunes on the iPad is a store where you purchase media - it is not the music player. The iPod app is the music player. Both apps are pre installed on the iPad.

How to get passed the grey screen with apple logo when turning on?

I got a Imac Intel 20" about 6 years old. The other day turned it on and everscince havent been able to get passed the grey screen with the apple logo on it? What could be the problems and how can i fix this?
cheers

Hello v:
The computer is fairly old and anything can happen. You could try resetting the SMC and see if that helps.
Barry

Anyone know how to get to the setting so i can record with the keypad instead of the mouse?thanks

Anyone know how to record with the computers keyboard on logic rather than the mouse on piano roll?

this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

Anyone knows How to get gd library to work with this PHP?

I am using sun one web server 7 with php add-on. and I am trying to use gd library to work with php. Anyone knows how to ?

checking size of long long... (cached) 8
checking size of long long int... (cached) 8
checking size of long... (cached) 4
checking size of int... (cached) 4
checking size of intmax_t... (cached) 8
checking size of ssize_t... (cached) 4
checking size of ptrdiff_t... (cached) 4
checking for st_blksize in struct stat... (cached) yes
checking for st_blocks in struct stat... (cached) yes
checking for st_rdev in struct stat... (cached) yes
checking for size_t... (cached) yes
checking for uid_t in sys/types.h... (cached) yes
checking for struct sockaddr_storage... (cached) yes
checking for field sa_len in struct sockaddr... (cached) no
checking for IPv6 support... (cached) yes
checking for vprintf... (cached) yes
checking for alphasort... (cached) yes
checking for asctime_r... (cached) yes
checking for chroot... (cached) yes
checking for ctime_r... (cached) yes
checking for cuserid... (cached) yes
checking for crypt... (cached) yes
checking for flock... (cached) no
checking for ftok... (cached) yes
checking for funopen... (cached) no
checking for gai_strerror... (cached) yes
checking for gcvt... (cached) yes
checking for getloadavg... (cached) yes
checking for getlogin... (cached) yes
checking for getprotobyname... (cached) yes
checking for getprotobynumber... (cached) yes
checking for getservbyname... (cached) yes
checking for getservbyport... (cached) yes
checking for gethostname... (cached) yes
checking for getrusage... (cached) yes
checking for gettimeofday... (cached) yes
checking for gmtime_r... (cached) yes
checking for getpwnam_r... (cached) yes
checking for getgrnam_r... (cached) yes
checking for getpwuid_r... (cached) yes
checking for grantpt... (cached) yes
checking for inet_ntoa... (cached) yes
checking for inet_ntop... (cached) yes
checking for inet_pton... (cached) yes
checking for isascii... (cached) yes
checking for link... (cached) yes
checking for localtime_r... (cached) yes
checking for lockf... (cached) yes
checking for lchown... (cached) yes
checking for lrand48... (cached) yes
checking for memcpy... (cached) yes
checking for memmove... (cached) yes
checking for mkstemp... (cached) yes
checking for mmap... (cached) yes
checking for nl_langinfo... (cached) yes
checking for perror... (cached) yes
checking for poll... (cached) yes
checking for ptsname... (cached) yes
checking for putenv... (cached) yes
checking for realpath... (cached) yes
checking for random... (cached) yes
checking for rand_r... (cached) yes
checking for scandir... (cached) yes
checking for setitimer... (cached) yes
checking for setlocale... (cached) yes
checking for localeconv... (cached) yes
checking for setenv... (cached) yes
checking for setpgid... (cached) yes
checking for setsockopt... (cached) yes
checking for setvbuf... (cached) yes
checking for shutdown... (cached) yes
checking for sin... (cached) yes
checking for snprintf... (cached) yes
checking for srand48... (cached) yes
checking for srandom... (cached) yes
checking for statfs... (cached) yes
checking for statvfs... (cached) yes
checking for std_syslog... (cached) no
checking for strcasecmp... (cached) yes
checking for strcoll... (cached) yes
checking for strdup... (cached) yes
checking for strerror... (cached) yes
checking for strftime... (cached) yes
checking for strnlen... (cached) no
checking for strptime... (cached) yes
checking for strstr... (cached) yes
checking for strtok_r... (cached) yes
checking for symlink... (cached) yes
checking for tempnam... (cached) yes
checking for tzset... (cached) yes
checking for unlockpt... (cached) yes
checking for unsetenv... (cached) yes
checking for usleep... (cached) yes
checking for utime... (cached) yes
checking for vsnprintf... (cached) yes
checking for vasprintf... (cached) no
checking for asprintf... (cached) no
checking for nanosleep... (cached) yes
checking for getaddrinfo... (cached) yes
checking for strlcat... (cached) yes
checking for strlcpy... (cached) yes
checking for getopt... (cached) yes
checking whether utime accepts a null argument... (cached) yes
checking for working alloca.h... (cached) yes
checking for alloca... (cached) yes
checking for declared timezone... (cached) yes
checking for type of reentrant time-related functions... (cached) POSIX
checking for readdir_r... (cached) yes
checking for type of readdir_r... (cached) POSIX
checking for in_addr_t... (cached) yes
checking for crypt_r... (cached) no

I dont know how to get to the touch screen settings because the touch part(not screen) wont let me. it lets me drag to the stuff and some lady says something in the earphones

i really need help

Sounds like VoiceOver has been enabled. See this article for instructions on turning it off.
iPod nano (6th generation and later): How to use VoiceOver
B-rock

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

I had to manually download the new version of itunes.. via tools, it gave me 4 items to download and i did not download all 4 compenants. Does anyone know how to get back to the pop up that contains tools so i can redownlaod all of them.

I lost my old iphone and have a new 5s.. i need to sync to itunes. i had to donwload manually via tools but i didnt download all four files. now when i plug my phone into itunes it says there is an error bc i didnt download all the files. so when i go into itunes now and check for updates it says its up to date. the problem is with the phone support file i didnt download.
Does anyone know how to get back to the pop up that has the music player update and itunes update bc this is the only place i have seen "tools" to be able to manually update all four files....
***IF i completely uninstall itunes and reinstall will it still have all my songs, photos, apps etc... bc i need to sync my new phone to get all my stuff back

this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

The user acct my apple was connected to no longer works (corrupt). My Apple TV is still synced to that account and all of my recent purchases are going to that username. Does anyone know how to get all of the purchased items back and to the new user?

The user profile my appleTV was synced on my computer to no longer works (corrupt). My Apple TV is still synced to that profile and all of my recent purchases are going to that username. Does anyone know how to get all of the purchased items back and to the new user (same computer)? I created a new user on my computer and moved the itunes folder to the desktop but never changed the path to which the apple synced to. Now I can only see old items I purchased before the user profile went bad. PLease help!

Welcome to the Apple Community.
Changing the library the Apple TV is synced with will delete all synced content from the Apple TV, but it won't delete purchased content.
You should be able to change the library, resync any content you want and transfer your purchases back to the new library.

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

Hi connally25,
Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
Facebook Follow Widget not working
Regards
Sonam

I can't get the AirPlay alert to stay off my Apple TV. I'm using AirPlay so it's not trying to connect. It's an alert that tells me what AirPlay is. Anyone know how to get rid of this?

I can't get the AirPlay alert to stay off my Apple TV. I'm using AirPlay so it's not trying to connect. It's an alert that tells me what AirPlay is. Anyone know how to get rid of this?

Welcome to the Apple Community.
Settings > AirPlay > Conference Room Display > Off.

Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

This question has already been addressed in this thread:
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
John M
National Instruments

Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

Hello,
Exactly which USB device are you referring to? Is the device a NI product?
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
Swapnil P.
National Instruments Engineer

Anyone know how to get to the security screen with a " Crashed" phone?

Similar Messages

Maybe you are looking for