Anyone know what this error means/how to fix it?: An error occurred while restoring this iPhone (-50).
My sister-in-law wanted the new Operating System for the IPhone 4, and i plugged her phone into MY macbook in order to do this. Before I updated the operating system, I synced her phone (at least I thought) to my computer. It went through the whole process, transferred her purchases and everything. But once I updated the operating system, it gave me the error message "An error occurred while restoring this iPhone (-50)." right at the end. Then her photos, videos, and contacts were all gone. Could these possibly still be on my computer somehow and I just can't see them? I don't want her to lose all of her stuff. Thanks.
Normally you would be able to do a Restore from Backup in iTunes, but since no backups are saved in YOUR iTunes, you're out of luck.
Similar Messages
-
Interleaf record count - does anyone know what it is or how to fix it?
After running verify and repair disc utility I am getting a message saying the "Interleaf Record Count should be 0 instead of 1397." The repair utility cannot fix it. I do not have any other disc repair software. Does anyone know what it is, how important it is (probably is important), and how I can fix it? Do I need Tech Tools or equivalent? Probably!! Tx!!
Many thanks! Dwight
This is on my old iMac G4, 700Mhz running 10.3.9.The only way to fix the problem is with Disk Warrior. If left alone you will likely incur data loss or more directory damage. If you don't want to buy repair software, then you could erase the hard drive, reinstall OS X, and reinstall your third-party software.
Be sure to back up your personal data files beforehand. -
I tries to synchronise my ipad cause i haven't done for a long time but i didn't finishe it so now it's showing a picture of my powercable pointing at the itunes logo
Your iPad is in Recovery Mode.
Read this: http://support.apple.com/kb/ht1808
Follow the instructions very carefully. -
The touch sounds for my iPad come and go. Anyone know what is happening and how to fix it?
I turned on my iPad today... and there was no sound. Usually every touch generates a tone... but it is gone... i need help to get it back. Specifically when i put the password in each character sounds a tone, when i type for each letter there is a sound/tone, when i start an app there is a tone/sound. Please help... thanks, es
Go to Settings, General, Sounds and ensure Keyboard Clicks are on.
If so, try a restart with the home and power buttons. Press them for ten seconds until the apple appears. -
An error occured while restoring the iphone -50
i lost all messages and contact ***!!! please help
Check this support document for error explanations. http://support.apple.com/kb/TS3694. Look for the error number listed. -50 seems to have something to do with USB port issues, or anti-virus software.
-
Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a -
I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
I have a 21" iMac that only boots as far as a folder icon with a question mark in it. Anyone know what this means and how to fix it?
It usually means your OS has corrupted files. You need to reinstall OS X.
If you are using Snow Leopard:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If you are using Lion:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button. -
I received error code (-50) when restoring my iPad2. Does anyone know what this error code means and how to fix it?
See the More Like This Section on the right...
-
Mac Mini Late 2012, does anyone know what this error message means, 4mem/9/40000000:0x7a5c8f90
Mac Mini Late 2012, does anyone know what this error message means, 4mem/9/40000000:0x7a5c8f90
What was the Mac ding when you received that error?
Were you running Apple Hardware Test?
http://www.macissues.com/2014/03/21/how-to-run-and-interpret-apples-hardware-tes ts-on-your-mac/
Seems like a memory error. -
Safari and calendar won't open due to 'calendar persistence plug- in problems'. Does anyone know what this means and how to resolve it please?
mac book pro with Mavericks 10.9.5Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Get could not connect this Iphone to itunes because of unknow error (0xE8000065) when trying to connect an ipod touch to itunes. Anyone know what this message means?
See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?
iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
iOS: Supported Bluetooth profiles
Basically it support headphones, keyboards, speakers, peer-to-peer gaming -
I used my Ipod while at the gym one day and now it's acting wacky. I have tunes that will not download due to an "unexpected error (-50). Anyone know what this is and how to fix it?
looks like the gtk theme is not the problem. didnt really think it was, but the documentation was worth posting. the guys over at ubuntu look as though they have dealt with this in great detail, and have produced a few solutions, which may or may not work. i have decided to post these for anyone else who may have these problems.
Solution 1 - new user creation:
https://bugs.launchpad.net/ubuntu/+bug/104521
Solution 2 - config file delete:
http://ge.ubuntuforums.com/showthread.php?t=724439
post number 6 here features the config file delete solution, as well as a link to another post which may be useful.
judging by a google search on this problem and the number of responses that came up, the bonobo/daemon error is quite a common curse for the users of gnome, although much more common in distros such as ubuntu or fedora.
i hope that this proves useful and if anyone has anything to add, please feel free. the more documentation the better.
EDIT:
another solution would be to remove gnome and reinstall it from scratch. (some please tell me if i am doing this correctly. thanks )
1. clean your catch:
pacman -Scc
2. remove gnome, gnome extras, and whatever other gnome files you might have installed
pacman -Rscn gnome gnome-extra etc...
3. reinstall gnome and gnome extras
pacman -Sy gnome gnome-extra
4. reconfigure your desktop the way you want.
Last edited by czechman86 (2008-05-28 23:42:43) -
I tried to order a book on iphoto but got the following message from Apple : "the file contains text with drop shadows. As a result Apple is unable to process your order" Does anyone know what this means and how to fix it? Thanks!!
Hello Katiebell62
Check out the troubleshooting steps to try and resolve your issue with purchasing a book through iPhoto.
iPhoto: Difficulty submitting a book, card, or calendar order
http://support.apple.com/kb/TS2516
Thanks for using Apple Support Communities.
Regards,
-Norm G.
Maybe you are looking for
-
Matrix Report - REP-1813:Object object name too large to fit in matrix cell
I had this problem when running a matrix report. The report details are as follow : Query : select department,work,salary from sal; matrix row field : department matrix column field : work matrix cell field : salary data inserted into table sal : dep
-
Can we connect a hsdpa usb modem to an iPhone?
Hello everybody, my question is: Can we connect a hsdpa usb modem to an iPhone? Thank you
-
How to update BOM with diff. ECN
Hi Team During change in BOM using ECM, I am allowed to change it with same ECN. If we change it with diff. ECN, it keeps the history of previous ECN. Foe example a BOM has 3 diff. items, which is created with ECN: 001. Now if we delete 2 items &
-
IDT ODBC Error - Data source name not found...
Hello, In the IDT, I have created a successful connection to a Relational Connection to my SQL Server datasource. However, when I try to access the data in the Data Foundation, I get the error, "ODBC Driver Manager. Data source name not found and n
-
All my photos are on an external hard drive. Can't iPhoto just read the files on that drive rather than copying them to another location and calling it a library. Seems dumb to have copies of all Mt work at a secondary location.