Anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999..

anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999.. many thanks :-)

They show in the camera roll, just not your computer?
Have you checked every folder that is in the DCIM folder?

Similar Messages

  • In the photos app I have 2 camera rolls and 1 photo gallery. Each new photo that I take gets stored in one of the camera rolls, but when I back up the photos to my computer it only backs up the one camera roll, and not any of the new picks. Please help

    In the photos app I have 2 camera rolls and 1 photo gallery. Each new photo that I take gets stored in one of the camera rolls, but when I back up the photos to my computer it only backs up the one camera roll, and not any of the new picks. In the one I backed up I have 500 plus photos and the other over 1000. I need to back up the 1000 one- camera roll. Any help would be sincerely appreciated. Help .... Please

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    - Reset all settings  Already sugested
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Anyone know how to get VPN to work tethering using iPhone 5 (AT

    I was able to tether my work computer to my iPhone 4 (Verizon) iOS 4.xxx just fine... I have to tether, then log into my work computer through a VPN.  I just upgraded to the iPhone 5, and switched to AT&T because I was sick of getting kicked off VPN and Outlook every time I answered a phone call.  WIth AT&T and the iPhone 5 I already tethered and talked... and it works great!  Today, i was going to test my work computer... and I can get the computer to tether... but it won't work with the VPN, leaving outlook and sametime useless.  I seen old strands where this problem had resolution, but the new iOS has different settings.. and those past functionality appear to be missing. 

    Thanks for everyone who read this thread. I came up with a solution to my issue, and I'm now able to tether my work computer to my iPhone 5 (AT&T) and log into VPN and see all my internal work apps. My IT guy at work had me change the settings within VPN itself (so had nothing to do with the iPhone 5 or AT&T) to "Enable local LAN access (if not configured)" under Advanced/Preferences in settings.
    I'm super pumped!!! As the 4G offered incredible speeds compared to my 3G Verizon iPhone 4.
    A Good Skia

  • Anyone know how I get charged a late this month?

    anyone know how I get charged a late this month?

    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • HT1454 HELP! ITook loads of photos on my ipod touch, and when i went to look at them they were just black images , and then out of 50 bout 7 of them came out?anyone know how to get the black pictures turn out ?

    HELP! ITook loads of photos on my ipod touch, and when i went to look at them they were just black images , and then out of 50 bout 7 of them came out?anyone know how to get the black pictures turn out ?

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup

  • HT1498 Horrible experience and the movie kept stalling through iTunes on appletv. Gave up (after paying for it) and ended up renting it through cable provider. Anyone know how to get $ back from apple?!

    Horrible experience and the movie kept stalling through iTunes on appletv. Gave up (after paying for it) and ended up renting it through cable provider. Anyone know how to get $ back from apple?!

    Issues are usually network related
    What is your internet speed? www.speedtest.net
    6mbps is required for instant HD (you can switch to SD in the settings)
    If on wifi try ethernet and www.istumbler.net to rule out interference
    Make sure you're using your ISP's DNS

  • My mac recently got stolen, after getting a new one i had to reinstall logic studio, but after moving house i have lost the serial number, does anyone know how to get a new one?

    my mac recently got stolen, after getting a new one i had to reinstall logic studio, but after moving house i have lost the serial number, does anyone know how to get a new one?

    Here:
    http://support.apple.com/kb/HT1861

  • I synced my iphone to my computer and all my music on my itunes on the computer is gone does anyone know how to get it back?

    I synced my iphone to my computer and all my music on my itunes on the computer is gone does anyone know how to get it back?

    They should be in the Photos app (help on syncing photos is here http://support.apple.com/kb/HT4236) - if they don't show then check that Settings > General > About > Photos isn't 0, and you could also try a reset to see if they show after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I had to manually download the new version of itunes.. via tools, it gave me 4 items to download and i did not download all 4 compenants.  Does anyone know how to get back to the pop up that contains tools so i can redownlaod all of them.

    I lost my old iphone and have a new 5s.. i need to sync to itunes.  i had to donwload manually via tools but i didnt download all four files.  now when i plug my phone into itunes it says there is an error bc i didnt download all the files.  so when i go into itunes now and check for updates it says its up to date.  the problem is with the phone support file i didnt download. 
    Does anyone know how to get back to the pop up that has the music player update and itunes update bc this is the only place i have seen "tools" to be able to manually update all four files....
    ***IF i completely uninstall itunes and reinstall will it still have all my songs, photos, apps etc... bc i need to sync my new phone to get all my stuff back

    this is a follow up from the profane post earlier....
    i have done this twice in two other posts..
    here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
    the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
    so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
    so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
    so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

  • Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this?

    Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

    As posted previously:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    If installing Leopard the process is similar in some respects.  If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button.  To install over an existing system do the following:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • I'm really disappointed with new 5 update.  No music, No photos, No videos, lost all emails.  Anyone know how to get these all back?  Yes, I have synced and synced and synced.  Help

    I'm really disappointed with new 5 update.  No music, No photos, No videos, lost all emails.  Anyone know how to get these all back?  Yes, I have synced and synced and synced.  Help

    Hopefully it isn't too late for this but:  before performing an update it is really best if you close all apps (double click the home button, click and hold on one of the apps that appears at the bottom of the phone until the red minus sign appears and then tap the minus sign until all apps are closed) and then turn the phone off by holding the standby button until the slider saying "slide to power off" appears and slide it to turn the phone off.  Then turn the phone back on and hook it up to your computer to sync and perform the upgrade.  This also helps if you do this before performing syncs too.  I had problems with an iPod previously where it would fail to backup before sync most times, but have never had a problem with updates or syncs since I started performing this procedure.  Unfortunately, your pre-update backup may have failed and the data in your apps might be gone, but you could try to restore your phone.  If I remember correctly how to do this, you connect it to your computer and check for updates.  It should say you're up to date, but have an option to restore the phone.  If it does, I'd try that.  It may also have a "restore from backup" option you could try.

  • The user acct my apple was connected to no longer works (corrupt).  My Apple TV is still synced to that account and all of my recent purchases are going to that username.  Does anyone know how to get all of the purchased items back and to the new user?

    The user profile my appleTV was synced on my computer to no longer works (corrupt).  My Apple TV is still synced to that profile and all of my recent purchases are going to that username.  Does anyone know how to get all of the purchased items back and to the new user (same computer)?  I created a new user on my computer and moved the itunes folder to the desktop but never changed the path to which the apple synced to.  Now I can only see old items I purchased before the user profile went bad.  PLease help!

    Welcome to the Apple Community.
    Changing the library the Apple TV is synced with will delete all synced content from the Apple TV, but it won't delete purchased content.
    You should be able to change the library, resync any content you want and transfer your purchases back to the new library.

  • I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

    I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
    I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
    The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

    The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
    So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
    As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

  • Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

    Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

    Hi connally25,
    Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
    http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
    If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
    Facebook Follow Widget not working
    Regards
    Sonam

  • I can't get the AirPlay alert to stay off my Apple TV. I'm using AirPlay so it's not trying to connect. It's an alert that tells me what AirPlay is. Anyone know how to get rid of this?

    I can't get the AirPlay alert to stay off my Apple TV. I'm using AirPlay so it's not trying to connect. It's an alert that tells me what AirPlay is. Anyone know how to get rid of this?

    Welcome to the Apple Community.
    Settings > AirPlay > Conference Room Display > Off.

Maybe you are looking for

  • HTML Content in Email Notifications

    Hi I was wondering if HTML content is supported in BPM Email notifications. The html code in the BPM UI task email notification is coming as plain HTML in the email, can you please let me know if there is any flag that needs to be turned on to proces

  • After moving iTunes, external drive sometimes becomes read-only after reboot

    I had some system corruption a few weeks ago, and had to restore my system.  As part of that prolonged effort, I decided to move my iPhoto Library and iTunes Library to external FW800 drives. I had terrible problems initially with these drives mounti

  • Re:How to close and reopen a document immediately?

    Original Message available here:<br /><a href="/webx?14@@.3c055358">Dave Sykes, "How to close and reopen a document immediately?" #, 15 Nov 2007 4:46 am</a><br /><br />> Dave Sykes - 04:46am Nov 15, 2007 Pacific<br /> I would like to close a document

  • I need equivalent FB setting for kernel26archck

    What is the equivalent to vga=773 in kernel26archck. Below is my current grub menu.lst: # Config file for GRUB - The GNU GRand Unified Bootloader # /boot/grub/menu.lst # DEVICE NAME CONVERSIONS # Linux Grub # /dev/fd0 (fd0) # /dev/hda (hd0) # /dev/hd

  • Plant and cost center.

    Can any body tell me where i can see that a plant is mapped with cost center