Anyone knows how to hard reset the Aspen manually?

Anyone knows how to hard reset the Aspen manually?
Need help to Hard reset SE Aspen.

original language: russian
Столкнулся со следующей проблемой.
После установки нужной мне программы, телефон дальше логотипа "гринхарт" не грузится.
Прошу подсказать как сделать мастер ресет при помощи клавиатуры. Вариант через SEUS не предлагать, т.к. нет стабильного высокоскоростного интернет-соединения.
Заранее благодарю.

Similar Messages

  • Hi, I've lost my Mac password to allow my Mac to install new software like Maverick OS. Does anyone know how I can reset the password please, so I can allow updates? Thanks.

    Hi, I've lost my Mac password to allow my Mac to install new software like Maverick OS. Does anyone know how I can reset the password please, so I can allow updates? Thanks.

    Help here >  Reset the user password in OS X Lion, Mountain Lion and Mavericks: Apple Support Communities

  • HT1414 I am locked out of my iphone 4 and i am connected to itunes. they are still asking me for a password. Does anyone know how to completely reset the phone so it gets rid of the passcode i do not remember??

    I locked myself out of my iphone 4. i am currently connected to itunes and i need to restore my phone. can anyone help me please been trying since 930am uhhhhhh

    iOS: Forgotten passcode or device disabled after entering wrong ...

  • Does anyone know how to simply edit the text in the spine of hard cover, 40 page book in the book mo

    Does anyone know how to simply edit the text in the spine of hard cover, 40 page book in the book module? I can click into any other text window and edit and change attributes but I am locked out of editing text when it comes to the spine of the book. I spoke to Blurb support and they referred me to Adobe. I spent 45 minutes with support here - no one knew. I am still waiting for a call back with an answer... not holding my breath as it's been a few hours now. HELP!!!

    Thanks for your reply John. I have experienced all the fiddly aspects you mentioned - these are attributes and although changing them requires the skill of a surgeon's hand - it's the actual editing of the text I can't seem to access anymore. The box just won't allow me to do anything except change attributes. Does that make sense? And it's only on the spine where I am having this issue. Puzzled! I have even rebooted the program and just now the computer - to no avail. 

  • Hi - I need help. I would like to use my old iPhone 3 as an iPod for music only. Problem is that my phone is locked with a password I can't remember. I havent used the phone since I got my iPhone 4. Anyone who know how I can reset the phone to standard?

    Hi - I need help. I would like to use my old iPhone 3 as an iPod for music only. Problem is that my phone is locked with a password I can't remember. I havent used the phone since I got my iPhone 4. Anyone who know how I can reset the phone to standard installation or just get acces to the phone. There is no SIM card in the phone.

    Hi Lawrence,
    Thanks for your prompt response, however I have first seen it now. I have placed an active SIM card in the iPhone turned it off and on. It now says SIM locked, please write access code. The problem is I don't remember the password. When I connect it to iTunes it tell me that I have to write the password before it can be used with iTunes...... Do you have any good ideas? I see you are from the NYC area.... used to work there back in the early 90´   Those were good days..... What a City

  • TS3899 I can't SEND email from Telus account in Alberta, Canada? Does anyone know how to set up the Outgoing server? Help! And thanks!

    Can't SEND email from Telus account in Alberta, Canada, unless I go to web mail. Does anyone know how to set up the Outgoing server? Incoming is fine. Outgoing used to work. We changed it when we went to another location, and can't get it back. Telus support can't fix it. Neither smtp.telus.net NOR mail.telus.net works for Outgoing server to send mail. Please help! Thanks.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • HT5621 When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

    When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

    You cannot merge Apple IDs but you can go to Settings > iCloud and 'Delete Account'.  When prompted to turn off documents and data, choose the only option which is Delete from my iPhone, but on the other prompt for Contacts, Calendars, etc you can choose 'Keep on my iPhone'  Then once the Account is Deleted form the iPhone, log back in with the correct Apple ID and choose Merge when prompted.  This will merge your data from this iPhone with that iCloud account effectively putting your devices on the same account.

  • Does anyone know how to turn of the pop-up iCloud log-in window on iPhone. I have no desire to use iCloud. I have turned off iCloud in settings but the pesky little critter is not deterred.

    Does anyone know how to turn off the pop-up iCloud log-in window on iPhone 5c. I have no desire to use iCloud. I have turned off iCloud in settings but that does not seem to deter the pesky little pop-up from continually asking me to log-in
    Thanks

    Pop up usually meant that icloud activation lock is still on on Apple servers. In order to deactivate you need to turn icloud back on by signing in and then sign out properly. For your sake I hope that you know the password.

  • Does anyone know how i can get the older versions of the ipod software

    Does anyone know how i can get the older versions of the ipod software on my nano because my nano had a feature that when i held down the menu button for a couple of seconds, the backlight turned on.......well ever since i downloaded the most recent software, everytime i hold down the menu button, it goes directly to the menu(which im not very enthusiastic about). Can anyone please help me if you can? I appreciate your help=)

    i agree with you 100%, i really want that feature back! it was so useful being able to turn the backlight on and off whenever i wanted. unfortunately im in the same boat as you are as i dont know how to get the old software

  • Hello does anyone knows how to re-enter the decimals for the tempo cause i only have a full number and can't enter a decimal number ?

    hello does anyone knows how to re-enter the decimals for the tempo cause i only have a full number and can't enter a decimal number ?

    Hi
    Go to Preferences:Display and check that you have:
    HTH
    CCT

  • Hello - Does anyone know how I can color the middle of a two circle Venn Diagram in InDesign CS6?

    Hello - Does anyone know how I can color the middle of a two circle Venn Diagram in InDesign CS6?

    I essentially do what Ellis recommends, although I usually use a somewhat different method:
    Draw two circles
    Copy and paste in place
    Select the topmost circles
    Use Object -> Pathfinder -> Intersect, which creates the green object in Ellis' screenshot
    Then grab the bottom-most circles and use Object -> Pathfinder -> Exclude Overlap
    Lastly, with your Exclude Overlap circles still selected, use Release Compound Paths.
    This has the same effect, but I don't love the anchor-points-and-scissors method myself. Many years ago I taught myself Illustrator with a flaky mouse on an irregular surface; it left me with a pathological hatred of tasks that require fiddly mouse-work. So I have keyboard shortcuts for all of the above, and can select all of the objects without having to very carefully mouse over a path. If you're fast with fiddly mouse-work, Ellis' method will probably work better for you than mine.

  • Anyone know how to get to the security screen with a " Crashed" phone?

    Getting the message "Restore Needed" but it says I can't connect with my Iphone because my phone has a security code. I can't get to the Security code screen on the phone.  Anyone know how to get to the security screen with a " Crashed" phone?

    Restore the phone on the same computer it was last synced to and it will not require the unlock code.
    If you don't have access to that computer you will have to use Recovery mode, which will wipe all content. See: http://support.apple.com/kb/HT1808

  • Anyone know how to get to the setting so i can record with the keypad instead of the mouse?thanks

    Anyone know how to record with the computers keyboard on logic rather than the mouse on piano roll?

    this is a follow up from the profane post earlier....
    i have done this twice in two other posts..
    here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
    the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
    so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
    so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
    so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

  • Does anyone know how to set up the cname in PLESK correctly?

    Hi, does anyone know how to set up the cname correctly in a PLESK control panel?
    I am trying to point my domain name to my .mac webspace using the new feature available for iWeb 08.
    I can see the cname category in the DNS setup on the control panel and have changed the cname www to web.mac.com as described and have waited over 48 hours and still no change. I just want to rule all avenues out before approaching my hosting company.
    Thanks in advance to anyone that has the jnowledge to help.

    Well, no one bothered to answer, that's a first. Managed to sort it out on my own though.

  • Does anyone know how to boot up the E52?

    Does anyone know how to boot up the E52? 
    So what is happen from the "push power button" to the "input pin" asking? Im interested in it. 

    You usually press 4 buttons!! Really interesting process
    The whole story on entering your pin number.
    After that your on your own..
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

Maybe you are looking for

  • How Can I Change My Email Address Associated with my Forums Account/Userid?

    I would appreciate some help, please. How can I get my email address changed associated with my forums account/userid (t0128985)? Many thanks! Best regards, Bill Solved! Go to Solution.

  • Lightning cable that came with iPhone 5 won't charge

    Waited in line since 4am to get my iPhone only to bring it home and try to to restore from iTunes when I find out I got a bad cable. When I plug it into an outlet it won't charge and when I plug (even just the USB end) into my laptop, it gives me an

  • Nameidentifier claims is no longer in the token issued by Access Control Service(ACS) with newly created ACS

    Hi, In our existing ACS, when we add a new relying party with that associate with rule as bellow: input claim type as htp://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier and output claim type as htp://schemas.xmlsoap.org/ws/2005/05/id

  • Adobe Photoshop CC Problems

    HI, I RECENTLY PURCHASED CC(PREVIOUSLY USING CS6) AND INSTALLED PHOTOSHOP CC ON MY PC WITH WIN 8, I7-3770, 16GB DDR3, 2G NVIDIA 670 GPU, 120GB SSD. AND I AM FACING A WERIED PROBLEM, LIKE WHEN I APPLY HIGH PASS FILTER TO A LAYER IT NOT AFFECTING IMMED

  • Add file name script

    I have a script for adding the file name as a text layer in PS. This script called "AddFileName02.js" worked by placing the file in the scripts folder on the hard drive. This script worked for PS CS2 (and I think PS CS3). This script could then be ac