Anyone seen an auto-mute feature happen to their midi tracks?

My midi tracks will automatically mute (most of the time) when I begin recording, then, most of the time, will not un-mute after the take. A few times it *would* un-mute automatically, but I can't figure out what is controlling that auto muting thing. I've looked thru the manual....it could be in there somewhere, but I thought I'd ask here and see if someone knows the answer, straight away.

Check your recording song settings to see how you have overlapping recordings set. Maybe set to "create and mute"

Similar Messages

  • Alsa: how to controll the auto mute feature?

    Hi,
    I have a slight problem with my laptop.
    I have a headphone jack, a analogue volume control wheel and my normal speakers.
    What I like to have is this:
    Plug in headphones => sound only from headphones
    No headphones plugged => sound from main speakers (I do not care if sound is still put onto the headphone jack as I would not here it one way or the other)
    Right now, this is not working out of the box.
    Plugging in my headphones mutes the speakers, great, but it does not unmute my headphones so I hear nothing until I go into alsamixer and unmute my headphones.
    This would not be a problem but once I unplug my headphones, alsa mutes them. Ergo, everytime I unplug and plug my headphone I have to unmute them in the alsa mixer.
    Can someone tell me where I can controll this behaviour to fix this?
    I have seen multiple entries for pulseaudio (which I am not usign right now) or references to a auto-mute button in alsamixer which I do not seem to have in mine.
    With best regards,
    p90

    @nomorewindows See if the same happens with power_save and power_save_controller parameters set to 0.
    @p90 did you try replugging twice or more times? One more thing you can try is to run 'alsactl store' before plugging headphones in with speakers outputting sound, then after unplugging run 'alsactl restore'. You can use -f switch, see the manual.

  • Auto Mute is not working when cycle recording in MIDI to a take folder

    I'm hoping someone can provide insight into the problem I'm having in Logic X.  I'm attempting to record multiple takes of MIDI recording playing an e-kit through Addictive Drums.  I have gone into the MIDI recording options menu and selected "create take folders".  According to the manual, the previous take is supposed to be auto-muted when the cycle region resets so I can record the next take.  However, instead Logic is playing the previous region.  This did not happen when I cycle recorded in Garage Band and I'm hoping I am just doing something simple wrong.  I know there is an option to create a new track and mute the previous, but I don't want to create 7 or 8 new tracks when I should be able to put them in a take folder.  The auto-mute feature worked in the tutorial video on Lynda.com, so I'm wondering what I am doing wrong.  Any advice?

    Upon further review, this problem seems to only appear when I work on projects that I import into Logic from GarageBand '11.  This is a HUGE glitch for my workflow, as I use cycle recording extensively while writing drum parts for songs and my biggest collaborating artist uses GB '11.  Does anyone know if there is something I'm missing?

  • HT4528 The icons on my iphone have all changed to large and I cannot change it back to normal view. Has anyone seen this happen?

    My phone's display has changed as if it were stretched like we can do with photo's except it affects the whole phone. It won't go back to a  normal display even after shutting it off and restarting. Has anyone seen this and  how did you resolve?

    Thank you...this did the trick. I had forgotten about that zoom feature. Now I will ALWAYS remeber it!
    Thank you,
    Deb

  • Have anyone seen this exception before??? setNull() feature not implemented

    java.sql.SQLException: [Microsoft][ODBC SQL Server Driver]Optional feature not implemented
    Have anyone seen this exception before????? I see this exception when I use the "setNull()" function in the preparedstatement class.

    statement.setNull(index, Types.NUMERIC); //works
    statement.setNull(index, Types.DECIMAL); //does not work

  • Anyone know why the Auto Check feature is not on my iPhone?

    When watching the Finger Tips it shows under settings then mail there is an auto check feature. I am missing it

    No problem. The rationale for it is that, since Yahoo emails are supposed to get "pushed" to the iPhone, you don't need AutoCheck.
    The problem of course is that yahoo push email has not been very reliable for some people.
    The way around this is to set up another (non-Yahoo) email account on the iPhone, even if you don't plan to use it. This will make the AutoCheck feature show up, and you can turn it on to catch the emails that don't get pushed.

  • Upgrading to Lion on MacBook Pro: Can I turn of that new auto save feature?

    I am going to be upgrading (or downgrading - yikes!) to Lion.
    Is there any way to turn off that new feature that saves every single version of a document?
    And, will Lion in anyway change my years worth of stored files totalling 60 GB? It is important for me to preserve them intact for various legal purposes, i.e. I cannot have a document created or modified on June 1, 2002 changed to today's date. Could that happen?
    Much love to all those helping people make the transition to Lion (THAT INCLUDES YOU KAPPY)!
    PS: I am currently running 10.6.8 on a MacBook Pro 5,1 -- Has anyone in the class of 5,1 upgraded to Lion yet? Thoughts?

    Yeah but Eww this auto save thing is insane!
    Why?  Are you under the mistaken impression that it stores multiple full copies of a document?  That is not the case.  Only the changes are stored to minimize the extra space used.
    After all my years of seeing people wish for auto-save features, I never guessed that when they got it people would be wishing to NOT have it...
    So is the amount of space that gets eaten up
    What amount of space is that?  By what?
    I think you're paying too much attention to people having problems.  That's basically ALL you get here.  This is where people come with problems.  So the information you're getting here has a serious selection bias...  you're not hearing what all the people who are NOT having problems have to say.
    This is nothing like the tiger to Leopard change or the Leopard to snow leopard change
    You're right, this is much more minor.  I'm actually surprised by how quickly things seem to be calming down here.  These forums were in a serious turmoil for months after SL's release!
    AND this update is taking away our right to those minor customizations that make our Mac OUR Mac
    How so?  Again, it sounds like you're listening to the wrong people or pulling "facts" out of thin air.  My MBP is just as customized in Lion as it was in SL, and is running quite smoothly.

  • My iPad will not connect to a computer with the cable which  means no updates or down loads. I have tried new cables and different computers. Has anyone seen this before?

    Has anyone seen this issue before?

    Possibly. Do you have other devices and will they connect?
    One possible thing that it could be is that the USB port on your iPad has gone bad. It happened to mine. Couldn't sync, could barely charge (it said 'not charging' even when plugged into the wall)
    I'd take it to the apple store, see if they can replicate it, and if they can, then they can diagnose it. Just back it up before you go, in case they do exchange it.

  • My auto translate feature is not working on firefox v5. When I highlight a few words and right click, the option is'nt there to translate. Why?

    Ok so my auto translate feature does not seem to be working. When trying to translate text on twitter or any page I highlight the text, right click and the option to auto translate has gone. I am running firefox v5 on vista. Can anyone help me out.
    thanks

    Sorry that my guess about what you are using was wrong. How about telling us exactly what you installed to provide that '''auto translate''' feature in Firefox?
    If you don't know, give us a list of the extensions that you ''do'' have installed so that we don't have to wildly guess or so we can do an '''''educated guess''''' as to which one isn't working.
    Help > Troubleshooting Information = use the '''Copy all to clipboard''' button, then paste into a text editor program. Then delete all but the list of '''Extensions''' and copy'n'paste that to the Reply box here.

  • A particular network user can't login to a mac in a classrom but other network users can. Then the network user can login to other identical macs in same classroom. Anyone seen this before?

    A particular network user can't login to a mac in a classrom but other network users can. Then the network user can login to other identical macs in same classroom. Anyone seen this before? It has happen twice. Two different teachers in two different classrooms entering the correct user name and passwords and computer won't allow them to login. Then they try in different computers in same classroom and have no problem login.

    Yes. I can login with a test user. And any other network user can login as well to this particular mac. Actually the mac has bootcamp and boots into either mac or windows. The same user entering the same login username and password can login into the windows side, but not the mac side.
    I had this same issue last semester in another classroom, another mac and a different teacher. This summer I reformatted and imaged that mac and I asked that teacher to login today to that reimagened mac and she had no problem today doing so.

  • Has anyone seen this display problem?

    I even changed my video card and still had the same issue? has anyone seen this or know how to fix this issue?
    I tried to show a screen capture but didnt have any luck but the issue is alot of my icons are showing pink lines on them and when in certain application and safari the pictures are showing up all pixelated with pink and green pixels instead of displaying the correct image? is it possible the AGP slot is bad? i just upgraded to 10.5.8 hoping to correct the problem but no luck. Also this is a Power PC 1.8 ghz.
    Thank You

    I wasn't notified that you asked me a question or that there was a new post on this topic. I should have been, that bugs me.
    Anyhow... Mr. Ah
    The problem that some people, mostly with a certain video card, were having was when they updated from 10.5.4 to 10.5.5. For many of them the problem went away when they went through the hassle of reverting back to 10.5.4.
    Did you +just recently+ update to 10.5.5? If you have, then their fix is for you too, going back to 10.5.4. If you have had 10.5.5 installed for a while now, and this just started happening, chances are good that it is your video card, or perhaps something affecting it like dust and dirt like DP says above.
    If you have another start up drive, firewire or internal, and you had enough space on it you might consider installing a previous OS 10.5 on there and start up from it. If the problem went away you would know it's 10.5.5. Perhaps even if you started up from your OS disc the problem might go away and again you'd know it was 10.5.5. Apple was made aware of the problem on some machines and said they were going to come out with a fix, but I don't think they ever did.
    Post back and say what the situation is, especially if you just recently updated to 10.5.5.
    And post back with what kind of G5 you have, look in the "About this Mac" window.
    Your card may be dying, but on the other hand it might be as easy as pulling it out, blowing it out, and putting the card back in again.

  • Has anyone seen this MacBook Pro 15" 2008 problem before?

    Hi. My MacBook Pro has developed a fault whereby a horizontal line appears on the screen, the mac freezes then a host of vertical lines gradually appear on the screen until it is obscured. Something similar happened in May last year and Apple charged me over £300 to repair it, replacing the 'mother board'.
    I have so far taken it into the Apple shop twice in the last week (a two hour round trip). Both times they have opened it, cleaned it and declared it fixed. This time it lasted about an hour before happening again, although this time at least I've been able to restart it.
    Has anyone seen this before, or have any advice about how best to proceed?
    I have put a video of the symptoms here:
    20120915 135612 - YouTube
    Thanks for reading. This is my first post so apologies if I've rambled a bit!
    Steve
    MacBook Pro 15", late 2008.

    I wasn't notified that you asked me a question or that there was a new post on this topic. I should have been, that bugs me.
    Anyhow... Mr. Ah
    The problem that some people, mostly with a certain video card, were having was when they updated from 10.5.4 to 10.5.5. For many of them the problem went away when they went through the hassle of reverting back to 10.5.4.
    Did you +just recently+ update to 10.5.5? If you have, then their fix is for you too, going back to 10.5.4. If you have had 10.5.5 installed for a while now, and this just started happening, chances are good that it is your video card, or perhaps something affecting it like dust and dirt like DP says above.
    If you have another start up drive, firewire or internal, and you had enough space on it you might consider installing a previous OS 10.5 on there and start up from it. If the problem went away you would know it's 10.5.5. Perhaps even if you started up from your OS disc the problem might go away and again you'd know it was 10.5.5. Apple was made aware of the problem on some machines and said they were going to come out with a fix, but I don't think they ever did.
    Post back and say what the situation is, especially if you just recently updated to 10.5.5.
    And post back with what kind of G5 you have, look in the "About this Mac" window.
    Your card may be dying, but on the other hand it might be as easy as pulling it out, blowing it out, and putting the card back in again.

  • Pop-up window with an attempt to open a URL - has anyone seen this?

    I was browsing a website for music lyrics when a suspicious pop-up appeared, along with a very small browser window (about an inch square on the screen). This has happened twice even though I have pop-ups blocked.
    The pop-up had the Safari icon and looked like a standard mac window. The text contained the following:
    <edited by host>
    Antivirus 2009 will perform a quick and 100% free
    scan of your computer for Viruses, Spyware and Adware.
    Do you want to install Antivirus 2009 to scan your
    computer for malware now? (Recommended)
    There is a cancel and an OK button at the bottom.
    The small browser window appears to be contacting the onlineprivatescan.com URL
    I did a force-quit because I did not want to click either button.
    I reset Safari, and ran the DNSChanger Removal Tool
    from macupdate, but it didn't find anything. I have not loaded codecs from any websites and I had just completed the latest Apple updates for OSX, Quicktime and iTunes before this problem occured.
    Has anyone seen this? Is this serious? I've never had any problems with Safari before this.

    Mac OS X 10.4 Tiger automatically checks your downloads for malicious software and content that could harm your system or collect information from your computer. You can read more about that here:
    http://support.apple.com/kb/HT2340
    If you feel you need added protection, read on:
    SecureMac has introduced a free Trojan Detection Tool for Mac OS X. It's available here:
    http://macscan.securemac.com/
    The DNSChanger Removal Tool detects and removes spyware targeting Mac OS X. Called DNSChanger Trojan and also known as OSX.RSPlug.A Trojan Horse, the software attacks users attempting to play a fake video file.
    Upon attempting to play the video, the victim receives the following message:
    “Quicktime Player is unable to play movie file.
Please click here to download new version of codec.”
    Upon running the installer, the user's DNS records are modified, redirecting incoming internet traffic through the attacker's servers, where it can be hijacked and injected with malicious websites and pornographic advertisements. The trojan also installs a watchdog process that ensures the victim's DNS records stay modified on a minute-by-minute basis.
    SecureMac's DNSChanger Removal Tool allows users to check to see if the trojan has been installed on their computer; if it has, the software helps to identify and remove the offending file. After a system reboot, the users' DNS records will be repaired.
    There may be other ways of guarding against Trojans, viruses and general malware affecting the Mac. A white paper has recently been published on the subject by SubRosaSoft, available here:
    http://www.macforensicslab.com/ProductsAndServices/index.php?mainpage=document_general_info&cPath=11&productsid=174
    Also, beware of MacSweeper:
    MacSweeper is malware that misleads users by exaggerating reports about spyware, adware or viruses on their computer. It is the first known "rogue" application for the Mac OS X operating system. The software was discovered by F-Secure, a Finland based computer security software company on January 17, 2008
    http://en.wikipedia.org/wiki/MacSweeper
    On June 23, 2008 this news reached Mac users:
    http://www.theregister.co.uk/2008/06/23/mac_trojan/
    More information on Mac security can be fund here:
    http://macscan.securemac.com/
    More on Trojans on the Mac here:
    http://www.technewsworld.com/story/63574.html?welcome=1214487119
    The latest news on the subject, from July 25, 2008, is:
    Attack code that exploits flaws in the net's addressing system are starting to circulate online, say security experts.
    The code could be a boon to phishing gangs who redirect web users to fake bank sites and steal login details.
    In light of the news net firms are being urged to apply a fix for the loop-hole before attacks by hi-tech criminals become widespread.
    Net security groups say there is anecdotal evidence that small scale attacks are already happening.
    Further details here: http://news.bbc.co.uk/2/hi/technology/7525206.stm
    You should also read what a major contributor called tacit has to say here:
    http://tacit.livejournal.com/238112.html

  • ITunes producer error 3000 character content of element "file_name" invalid. Can anyone help me out? This happens when i try and submit an epub file, i haven't had this before.

    Can anyone help me out? This happens when i try and submit an epub file, i haven't had this before. "iTunes producer error 3000 character content of element "file_name" invalid."
    This is the full message

    You really need to put your codes between the
    [\code] tags
    see http://forum.java.sun.com/features.jsp#Formatting
    for more infoCode tags might make it look a little better, but there's still too darn much code. We're volunteers, after all. It'd be a lot of work to review all of this stuff. Can you demonstrate your problem with something smaller? Learn out how to do a combo box with just a page or two and then appy that to your big problem. That's how I'd do it. - MOD

  • Screen Sharing scrolling, can the auto-pan feature be turned off?

    I am using screen sharing from home on my MacBook Pro to connect to my Mac Pro at work and it performs really well in all respects but one. My Mac Pro has dual monitors, so Screen Sharing running on my MacBook Pro gives me the option of either scaling the larger screen down, which is not readable, or being able to scroll around the larger screen of my work machine. The problem is that Screen Sharing has the automatic pan feature so that if my mouse moves to the edge of the window showing the shared screen then it starts scrolling it. This is nice the first time you see it but quickly becomes annoying because every random mouse movement that takes me to the edge of the window, like moving the mouse out of that window to go the the dock or the menu of my MacBook Pro, starts scrolling the screen when I did not want it to. I find myself constantly re-centering the view of the shared screen in the window back to the position I want it in and I find this to be a very anti-productive waste of time. I would like the auto-pan feature disabled so that it will only scroll when I grab a scroll bar and move it. Is it possible to do this?

    Hey all,
    I'm having the exact same problem with a Toshiba Satellite P300 here. The multimedia button seems so sensitive that the laptop will turn on by itself after a while. I haven't been able to find a program to disable it. Has anyone found a solution to this? If you do, please send me an email at [email protected] (remove the nospam) so I can fix it once and for all.
    Thanks,
    Dre

Maybe you are looking for