Anyone using itunes with XP MEDIA CENTER?

I have had trouble installing itunes for DAYS! I kept getting the is not a win 32 app...did the troubleshooting but cant get the itunes uninstalled because it never got installed and cant find where to remove the set up. When I try to delete the TEMP folder it has two prgrams running with MEDIA CENTER that will not delete. I contacted apple and they said it is not compatible ith MEDIA CENTER EDITION...however, RADIO SHACK SWEARS it is. HELP!

Not to my knowledge. Media Center's music functions are essentially a wrapper around Windows Media Player - whatever you can play through WMP and add to its library is accessible through the Media Center UI. Unfortunately this does not include your AAC and M4P files. There are some freeware and commercial decoders out there that will enable AAC playback through WMP (www.rarewares.org/aac.html, www.3ivx.com), but for any protected files you're out of luck.
As for front-ending iTunes through Media Center, the HP interface you refer to is the only one I know of and frankly it's not very good. You might try The Green Button forums, a quick search turned up at least one likely thread.

Similar Messages

Using iTunes as a Media Center app vs. Miro--Which is better?

Ok, so I've been using Miro as media manager/player portal for a while now,
and it has several things I don't like: Organization of media is a nightmare,
Miro often acts flakely in trying to organize playlists, etc.
and I've been taking a look at VideoDrive for iTunes.
I like the fact that iTunes is the backbone for it, and we all know how easy it is
to organize content and create playlists in iTunes.
But how does it compare to Miro?
As far as handling multiple video formats, etc?
Anyone whose used both for media playback / management,
please post your feedback. It will help in my decision to buy
VideoDrive or not....
TIA!

bump.

Can't use WAP2 with XP Media Center and WRT54GL

I downloaded and installed the patch from MS that supposedly enables WAP2 on XP, but when I switch to that level of security, I lose all connectivity. Did I miss something in the setup?

First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Also delete any entry for your current network. Reboot computer. Now return to "Preferred Networks" and enter your current network info (SSID, encryption, and key). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. Computer should connect automatically.
If the above does not fix your problem, download and install the latest driver for your wireless card.
Hope this helps.

Using the Apple Remote with Windows Media Center

Hello guys
First of all, I am Swiss, so excuse me for my bad English (grammar and stuff...)
So, my problem: I bought the Apple Remote and I think it is very awsome! But since Apple has removed Front Row in Lion, I don't really can use it anymore. So I'd tried to use it with Windows 7 Media Center. But it doesn't work correctly. Does anyone know, how to fix that?
Thank you

I had a Green Button remote provided with HP PC XP, Vista for Windows Media Center prior to getting Mac Pro.
Now in Lion, I have Hauppauge WinTV HVR-980 USB adapter (less than $100) including a remote that works in Lion for the Hauppauge TV app.
In Windows, the same remote works with all "Media Center" processes Music, Pictures, TV... instead of mouse/keyboard. If your TV service requires set top box, then you have to use its remote to change channels.
If ISP's internet Co-Ax also carries TV signal, you can get Cable Splitter (smple picture):
http://www.ebay.ca/itm/2-Way-TV-RF-Coaxial-Cable-Splitter-CATV-Signal-/320868649 227?pt=LH_DefaultDomain_0&hash=item4ab543090b
and feed 1 co-ax to USB TV adapter, the other to your Modem/Router.
The Hauppage USB was a good choice because it serves Mac & Windows.
Also, In Windows, if you have an XBox, it can be used as "Extender" for your A/V output.
http://windows.microsoft.com/en-US/windows7/Set-up-a-Windows-Media-Center-Extend er
Although this may not answer your question, it describes other options.

Networking the mini with a Media center PC

I have my Mini networked with a PC with Windows media center. I have not been apple to see recorded TV from the PC to the mini. Any ideas?
Mac Mini Duo Mac OS X (10.4.6) networked wit PC

yes, absolutely, for standard playback, the integrated chipset was good. the problem was XBMC doesn't seem to work well with the nouveau driver, even trying to browse menu's was super choppy, took like 10-20 seconds everytime you press down in a menu for example to see the selection change. i could have used nvidia's binary driver, but i've been using nouveau for so long now, and it actually makes my system feel like it has a quad core which the nvidia didn't at the time, maybe nvidia's drivers have improved since then? but at the same time, i'm glad i got the radeon, the XBMC performance is great, and the HDMI hookup for the tv is convienient as well. Also using the vga input on my TV, i kept having to adjust the screen position because its constant autoscan everytime the resolution changed did not get it right, with the hdmi its lined up perfect without having to mess with it. so i think the 50$ for the card and an hdmi cable was worth it
Last edited by ssl6 (2010-08-17 15:18:34)

Premiere Elements cause problems with Windows Media Center while streaming to TV.

I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

I have iphone, but I also have an Android can I use itunes with an Android?

I have iphone, but I also have an Android can I use itunes with an Android?

Hello,
check out FoneSync for Android. It syncs contacts, calendars, music and photos with your Android device and features an iTunes like interface. So it is easy to use and fast.
Kind regards
Jan Fuellemann
Disclaimer: I work for nova media, but get no benefit or compansation from posting here

How can I use iTunes with my Moto Q?

Can I get QuickTime for my phone? I've downloaded a video for my son, but can't play it in Windows media player. What options do I have to use iTunes with my phone?

Video purchased through the iTunes store can be played on your computer, an iPod, through AppleTV. It can't however be transferred to a Motorola Q. Sorry.

ITunes is totally frozen with multiple paints of same screen within itself. Also incredibly slow. Are there alternative players I can use with my iPhone, or must I use iTunes with my iPhone? iTunes is effectively unusably slow.

iTunes is totally frozen with multiple paints of same screen within itself. Also incredibly slow. Are there alternative players I can use with my iPhone, or must I use iTunes with my iPhone? iTunes is effectively unusably slow. I am using Windows 7.
I only use it once every few weeks and each time it is more disappointing than the previous time. does it run better on a Mac than Windows? Is this app really the future of media? Really?

I am using iTunes 11.1.3 -- The most recent version. When I select something from my albums it just freezes. I have restarted it a few times with same result.

HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

Right click on your device icon on the left pane of iTunes and click on transfer pur....

I purchased songs from 2 different computers using itunes with the same apple id. I had 1 iPod I used for these but I just recently got an iPhone and I was wondering why it wasn't letting me put my purchased songs on my iPhone?

I purchased songs from 2 different computers using itunes with the same apple id. I had 1 iPod I used for these but I just recently got an iPhone and I was wondering why it wasn't letting me put my purchased songs on my iPhone?

You can transfer iTunes content from an iTunes library on a single computer only.
Since these songs were purchased with the same iTunes account, you can download the song that is not in your iTunes library on the computer you will be syncing your iPhone with. Or you can download the song or songs direct on your iPhone.
http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US

Has anyone used JAAS with WebLogic?

Has anyone used JAAS with Weblogic? I was looking at their example, and I have a bunch of questions about it. Here goes:
Basically the problem is this: the plug-in LoginModule model of JAAS used in WebLogic (with EJB Servers) seems to allow clients to falsely authenticate.
Let me give you a little background on what brought me to this. You can find the WebLogic JAAS example (to which I refer below) in the pdf: http://e-docs.bea.com/wls/docs61/pdf/security.pdf . (I believe you want pages 64-74) WebLogic, I believe goes about this all wrong. They allow the client to use their own LoginModules, as well as CallBackHandlers. This is dangerous, as it allows them to get a reference (in the module) to the LoginContext's Subject and authenticate themselves (i.e. associate a Principal with the subject). As we know from JAAS, the way AccessController checks permissions is by looking at the Principal in the Subject and seeing if that Principal is granted the permission in the "policy" file (or by checking with the Policy class). What it does NOT do, is see if that Subject
has the right to hold that Principal. Rather, it assumes the Subject is authenticated.
So a user who is allowed to use their own Module (as WebLogic's example shows) could do something like:
//THEIR LOGIN MODULE (SOME CODE CUT-OUT FOR BREVITY)
public class BasicModule implements LoginModule
private NameCallback strName;
private PasswordCallback strPass;
private CallbackHandler myCB;
private Subject subj;
         //INITIALIZE THIS MODULE
           public void initialize(Subject subject, CallbackHandler callbackHandler, Map sharedState, Map options)
                  try
                       //SET SUBJECT
                         subj = subject; //NOTE: THIS GIVES YOU REFERENCE
TO LOGIN CONTEXT'S SUBJECT
                                                 // AND ALLOWS YOU TO PASS
IT BACK TO THE LOGIN CONTEXT
                       //SET CALLBACKHANDLERS
                         strName = new NameCallback("Your Name: ");
                         strPass = new PasswordCallback("Password:", false);
                         Callback[] cb = { strName, strPass };
                       //HANDLE THE CALLBACKS
                         callbackHandler.handle(cb);
                  } catch (Exception e) { System.out.println(e); }
     //LOG THE USER IN
       public boolean login() throws LoginException
          //TEST TO SEE IF SUBJECT HOLDS ANYTHING YET
          System.out.println( "PRIOR TO AUTHENTICATION, SUBJECT HOLDS: " +
subj.getPrincipals().size() + " Principals");
          //SUBJECT AUTHENTICATED - BECAUSE SUBJECT NOW HOLDS THE PRINCIPAL
           MyPrincipal m = new MyPrincipal("Admin");
           subj.getPrincipals().add(m);
           return true;
         public boolean commit() throws LoginException
               return true;
    }(Sorry for all that code)
I tested the above code, and it fully associates the Subject (and its principal) with the LoginContext. So my question is, where in the process (and code) can we put the LoginContext and Modules so that a client cannot
do this? With the above example, there is no Security. (a call to: myLoginContext.getSubject().doAs(...) will work)
I think the key here is to understand JAAS's plug-in security model to mean:
(Below are my words)
The point of JAAS is to allow an application to use different ways of authenticating without changing the application's code, but NOT to allow the user to authenticate however they want.
In WebLogic's example, they unfortunately seem to have used the latter understanding, i.e. "allow the user to authenticate however they want."
That, as I think I've shown, is not security. So how do we solve this? We need to put JAAS on the server side (with no direct JAAS client-side), and that includes the LoginModules as well as LoginContext. So for an EJB Server this means that the same internal permission
checking code can be used regardless of whether a client connects through
RMI/RMI-IIOP/JEREMIE (etc). It does NOT mean that the client gets to choose
how they authenticate (except by choosing YOUR set ways).
Before we even deal with a serialized subject, we need to see how JAAS can
even be used on the back-end of an RMI (RMI-IIOP/JEREMIE) application.
I think what needs to be done, is the client needs to have the stubs for our
LoginModule, LoginContext, CallBackHandler, CallBacks. Then they can put
their info into those, and everything is handled server-side. So they may
not even need to send a Subject across anyways (but they may want to as
well).
Please let me know if anyone sees this problem too, or if I am just completely
off track with this one. I think figuring out how to do JAAS as though
everything were local, and then putting RMI (or whatever) on top is the
first thing to tackle.

Send this to:
newsgroups.bea.com / security-group.

How to use iTunes with more than one Ipod

I would like to know whether is possible to use iTunes with more that one ipod, because I need to have 2 differents libraries, one for my 30GB ipod and my son's ipod nano.
Thanks, Felipe

Try this http://docs.info.apple.com/article.html?artnum=300432

After I synced my iphone (4S with ios 8.1.2) using itunes with MS outlook on my new PC , suddenly all my contacts without telephone number and what I have the name of the contact only ?

After I synced my iphone (4S with ios 8.1.2) using itunes with MS outlook on my new PC , suddenly all my contacts without telephone number and what I have the name of the contact only ?

I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

I have a new ipad which needs itunes 10.7 or later to download my music onto it... but my ipad is not compatible with this as it is too old... can i use itunes with this ipad and apple laptop?

I have a new ipad which needs itunes 10.7 or later to download my music onto it... but my apple laptop is not compatible with this as it is too old... can i use itunes with this ipad and apple laptop?

To use itunes 10.7 you need to have Snow Leopard operating system installed
These are the system requirements
System Requirements:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
If you can run Snow Leopard you need to purchase it
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Anyone using itunes with XP MEDIA CENTER?

Similar Messages

Maybe you are looking for