Anyone using motu 828mk3 with gb?

i like the i/o setup of the mk3 cause i need many stereo pairs for my drum modules, keyboards etc. i was told in motu forums only 1 output pair is supported by gb which is fine for anything i know how to do. one person said they thought only 2 inputs were available for gb. that seems unlikely but after speaking with a motu rep on phone about 828mk3 and gb, he could not confirm compatibility. i was like whoa who knows then? some motu forum users suggested i ask here in gb forums to see if others have had success with the two together. in the logic forum ive seen posts about the motu but i dont want to assume about gb. any info greatly appreciated. my gear is begging to be setup proper with my comp.

eta: 3/20-3/25
Outstanding. I'm getting ready to purchase some BIG iron myself (those new Mac Pros seem like serious bang for the buck), jsut finished tearing apart my entire office and it's just about put back together with sapce prepared B_)>
After you've used it for a bit, please do report back, I'd love to hear some firsthand feedback on it's performance
hangtime for president
Ack! Do i really deserve that kind of punishment?
Anyway, good luck, I hope it arrives on the early side of that ETA.

Similar Messages

  • Anyone using MOTU 8pre with 10.5.2/Logic 8 Express...?

    Looking at a MOTU 8pre to use with Logic 8 Express. Does anyone know if the 8pre is compatible with Leopard 10.5.2... any issues to report?

    I previously got the 8pre for 10.5.1 since my M-Audio Firewire 410 didn't offer drivers for leopard. So far I'm very happy with the Motu 8pre. I just got the new MBP Pernryn with 10.5.2 and hoping that everything continues smoothly. I've just downloaded the motu driver for 10.5.1 (the 10.5.2 motu driver isn't available yet) to use with 10.5.2 so I'll be plugging in my 8pre tonight for a test run.

  • Anyone using iMovie 6 with OS 10.5.3

    Anyone using iMovie 6 with OS 10.5.3
    I am now using iMovie 06 and iDVD 08 with OS 10.5.2 on a MacPro (working fine).
    I would like to here from a 10.5.3 user before getting 10.5.3
    Thanks.

    thanks Bengt.
    I've never done video editing so this is new to me. was surprised at how easy it was with the test video, in this case, being a "flipvideo camcorder" the first step is taking the video clips and then making them into a movie - hence the need for imovie 6.
    I will have to now actually read the instructions for doing the next step of editing. initially just wanted to see if it worked with the FLIP cam. now I can have fun learning something totally new.
    first think I'm going to do is check what format iMovie6 saves the movie in. the clips are AVI. The tech said they could be saved to another format, but haven't gotten that far yet.
    thanks
    Sue

  • Anyone use cfdocument tag with a cfloop

    Anyone use <cfdocument> tag with a <cfloop>
    I am trying to generate multiple documents like this -
    <cfloop query="myquery">
       <cfdocument type=pdf>
            <html>...html code here...<html>
      </cfdocument>
    </cfloop>
    But only the first document is generated in the browser?
    my requirement i wnat to create multiple PDF and upload in to folder then zip folder so user can able to download ZIP file
    thanks in advance

    my requirement i wnat to create multiple PDF and upload in to folder then zip folder so user can able to download ZIP file
    1) Create a folder named, say, docsDir, in the currect directory.
    2) Create the PDFs, using Eddie Lotter's suggestion, naming each file dynamically, and storing each in the folder docsDir.
    <cfloop query="myquery">
        <!--- Use row number to create filename dynamically --->
       <cfset filename='doc' & myquery.currentRow & '.pdf'>
       <cfdocument format="pdf" filename="#expandPath('docsDir\#filename#')#" overwrite="true">
            <html> Code to generate content of <cfoutput>#filename#</cfoutput> goes here. </html>
      </cfdocument>
    </cfloop>
    3) Zip the folder, docsDir, storing the resulting file, docsDir.zip, in the current directory.
    <cfzip action="zip" file="#expandPath('.')#/docsDir.zip"   source="#expandPath('docsDir')#">

  • Anyone using Database 11g with UCM?

    Anyone using Database 11g with UCM? Can't find anything on the customer reference site. Customer wants to be reassured that they are not the first, etc...
    Thx.
    ft

    I know of a few companies that are using 11g ;)
    They wont be the first.

  • Has anyone used an app with the Maverick software to burn iPhoto slideshows to DVD disks that will play on any DVD player?

    Has anyone used an app with the new Maverick software to burn iphoto slide shows to DVDs that will play on a standard DVD player?  This probably cannot be a demo app in that the amout of photos on the slideshows is large.  
    Thank you,
    Jim

    Export the slideshow from iPhoto, that makes a movie of it.
    Do you want to use this DVD in a domestic DVD player? If so, then the disk will have to be 'authored' to make it the correct form for that. If you have iDVD then that's the app you use. However, iDVD is no longer developed or distributed by Apple. You may be able to get it on an old iLIfe install disk.
    Other options:
    Burn: http://macupdate.com/app/mac/21992/burn
    Toast: http://macupdate.com/app/mac/6351/toast-titanium
    But there are lots of others too. Search on the App Store or MacUpdate

  • Has anyone used iPhone 4s with Oticon Streamer Pro

    Has anyone used iPhone 4s with Oticon Streamer Pro

    I downloaded it today. Doesn't seem to work. It gives you to the option of playing from "Logic Pro" or "Logic Express". When I click "SET" to set the project to fire, all of my logic files are grayed (assuming that means they are not an option)... Waste of 20 bucks.
    Steve
    Branson, Missouri

  • - it doesnt want to drag? Has anyone used this software with imovie?

    I am trying to transfer vhs movies to my harddrive using videglide  I have successfully recorded it and saved it onto my desktop but I cant seem to transfer the movie to iphoto for editing - it doesnt want to drag? Has anyone used this software with imovie?

    I presume you mean Videoglide - which I had never heard of.
    Having read the specs:
    http://www.echofx.com/videoglide.html
    I am wondering how it manages to digitise analogue video from a VCR. For that I use an analogue to digital converter that imports straight into iMovie via firewire.
    You should contact the developers of Videoglide for instructions on how to use it.

  • Has anyone use camptune x with mountain lion even though says it does not support it yet

    HAs anyone used camptune x with mountain lion even though it is not yet specific to moutain lion yet?

    Tried it yesterday on my imac 21Jan 2013 running mountain lion 10.8.2, total disaster.
    Backed up my boot camp image using winclone (great programme)
    Purchased and ran camptune x and everything went fine.
    Rebooted into windows 7 and recieved error messages find--set--root--ignore floppies--ignore cd/bootmgr
    ERROR 15
    Gave me a list of options on screen but none resolved the issue.
    Booted back into winclone and used the backup image i had just created to reinstall on bootcamp.
    Have emailed the company but have had no reply as yet
    **** STAY AWAY until updated for mountain lion YOU HAVE BEEN WARNED ****

  • Anyone using Lacie NAS with Mac?

    Hi. I'm not sure if this is the right place to post this question. I want to buy a NAS with about 4TB capacity and currently am looking at the LaCie Network Space Max. I plan to move my iTunes library to the LaCie, and load it up with a bunch of other movies and content. I plan to use TimeMachine to back up my MacBook Pro onto the LaCie. I also plan to stream movies from the LaCie to my TV using the new Apple TV (which I haven't purchased yet).
    Does anyone have any experience with this particular LaCie device, or with LaCie NAS devices in general. Do you find them to work well with Mac computers in the manner I describe above? Thank you!

    Do you have a particular reason for purchasing this specific device?
    i.e I use a QNAP TS410 nas which does all that you want on mac flawlessly, so at the minimum add this to your potential list.

  • Anyone using durable topics with high data volumes?

    We're evaluating JMS implementations, and our requirements call for durable subscribers, where subscribers can go down for several hours, while the MQ server accumulates a large number of messages.
    Is anyone using Sun MQ in a similar scenario? How is it holding up?
    Sun folks, do you know of production installations that use durable topics with high data volumes?
    thanks,
    -am

    We are using a cluster of Sun�s JMS MQ 3.6 with durable message queues and persistent topics. In a 4 hour window each night we run over 20,000 messages through a queue. The cluster sits on two Windows servers, the producer client is on a AIX box and the consumer is running on a iSeries. Within the 20,000 messages are over 400,000 transactions. Each message can have many transactions. Yes, the iSeries client has gone down twice and the producer continued with the message queue pilling up, as it should. We just use the topic to send and receive command and status inquiries to the clients. So every thing works fine. We have only had a couple issues with a client locking and that maybe fixed with sp3, we are in the process of installing that. The only other issue we have had is that once in a while the producer tries to send an object message with to many transactions and it throws and JMS exceptions. So we put a cap on the size of the messages, if its over a set number of transactions it send each transaction as separately, otherwise it sends all the transactions in one object type (linked list of transactions) message. Compare the cost of this JMS system with Tibco or Sonic and you�re looking at big savings.

  • Does anyone use Cineform Neoscene with Canon t2i footage and Premiere Elements 10?

    I'm wondering if its worth the $100.00 investment - not looking to spend more money but I really want to avoid the hassle I've had with other editing programs...... I will be using MOV H.264 footage from Canon Elph 500 and Canon t2i and looking ffor the easiest workflow and I came across this item and am wondering if people have used it.
    Thanks!
    Maureen

    QT Pro can do Cut-and-Butt editing, and if that is all done, can Export without Retranscoding the footage.
    For much more than that, however, it lacks the capabilities.
    I do not know how well CineForm's NeoScene works with PrE, but before PrPro got full AVCHD native support, was very popular with the PrPro users. I cannot recall anyone having an issue with it, in that program, but might have missed a complaint, or two.
    Good luck,
    Hunt

  • Anyone using ColorMunki Photo with Retina iMacs?

    I've been successfully using X-Rite's ColorMunki Photo to profile my current MacBook Pro display.  I just got a new iMac 27" Retina Display with the upgraded video card.
    Tried to profile the iMac, and couldn't get the luminance control in ColorMunki to work properly to adjust the desired (100) display luminance as an early stage of profiling.  So went ahead and went thru the profiling process, came to "Save" and did that, and the display turned posterized!  I finally was able to figure out how to get back to the 'standard" profile and get rid of the custom profile, but not a pleasant experience.
    Has anyone used the ColorMunki to successfully profile their iMac Retina display?  Works fine on my MacBook Pro's Retina display, but goes haywire on the iMac.
    I will contact X-Rite tomorrow, but would appreciate anything you could pass along on this.
    Rick

    ADC doesn't work with all monitors with all profiling solutions, so you just have to try it and see if it works. If not, then you always have to remember to turn that check box so you can set the brightness and other settings ADC would normally do manually.
    Check the System Preference under Keyboard (Shortcuts tab), and make sure the keys to increase or decrease brightness are off.

  • Anyone using CORSAIR 3200C2PT with 875P Neo ?

    Has anyone been using a pair of CORSAIR TWINX CMX256A-3200C2PT Memory modules with an 875P Neo FiS2R motherboard?
    How they work ?
    Did they needed any change in BIOS to work or they were plug in and play ?
    Thanks for info !

    Quote
    Originally posted by Jonathanvandyke
    DO NOT GET THE COSAIR! Terrible for theses boards... dosnt run in Ultra turbo or turbo.... if you get Kingston 3500 HyperX its 250$(30$ less) and runs at 2-3-3-5-8 CL at ultra trubo.... They do work at slow... which is pat disabled... but why settle for less perfomace at more cost
    Thank you for all replis.
    So CORSAIR is not a good and reliable  Brand ?
    I thought it was considered one of the best but by what you are saying I get the impression that it's memory is not as reliable as others'.......
    Anyone else having experiences with this particular memory and their 875P Neo FiS2R motherboard ?
    What do you exactly mean that CORSAIR does not run in Turbo or Ultra Turbo ? Just this particularly modules I got or NO Corsair whatsoever will be able to perform in Turbo or Ultra Turbo and under no conditions can do any PAT ?

  • Is anyone using their MB with a separate monitor?

    I am wondering if using the MB with a separate monitor causes it to be noisier or hotter. I once tried to use a PB with a separate monitor and it was extremely noisy.

    Hello Bantock,
    Your MB should preform without any issue's. I of course suggest that you only use the external monitor when the AC adaptor is plugged in.
    iAnswer

Maybe you are looking for