Anyway to speed up using a P2P program?
When using a P2P program, the download speeds are incredibly slow.
When downloading files off my browser, I can get around 130 kbs. When using P2P, I'm lucky to get 20 kbs. Is there anyway to speed this up? I'm using a WRT54G router.
What router and version is it?
What P2P do you use?
It also depends how many peers you're connected to.... I range anywhere from 5kbs to 500kbs. I assume you have forwarded the correct port? Did you set a speed limit in the P2P program setup?
Similar Messages
-
Hi, I've just downloaded Aperture 3.2 and transfered all my iPhoto Library but now when I use the Aperture program it runs at the slowest speed possible and is almost impossible to work with. It is constantly processing why is this?
You can click on the text that says 'processing' in the main windows and it will open (toggle) the Activity Window, (can also be accessed via the Window menu -> Show Activity.
It will tell you what Aperture is doing with more precision and perhaps even how many photos it still needs to process. It is generally best to wait until all that processing is done before you start working with the photos (well it is best to first turn of options what you dont want to use, perhaps Faces or Previews and then let it process the new photos). -
Blocking p2p programs with time capsule
Hello, I've got a question. I currently have a previous-model time capsule, with which I created a wireless network over my house, and every computer in the house connects to it. The problem is that some computer uses it to download through p2p programs, which slows down the internet speed like ****. Said I don't use p2p, so it wouldn't matter to lose the ability on my macs, can I prevent people from using p2p over my network? The programs used are mostly eMule and bearshare, if relevant.
Thanks very much.Oh, that's too bad. Thank you for the answer anyway,
-
Unable to disconnect - files used by another program?
Looking for some help. Last few times I've connected my iPod to my computer, it won't let me eject it after the update is complete. When I click either eject button, I get a message claiming that some of the files are being used by another program and it can not eject the iPod. However, I have no other programs running at anytime will iTunes is running. I end up going into My Computer and ejecting the drive from there, but I really should be able to do it through iTunes.
Anyway of finding out what the files that are being "shared" are? Should I convert all of my files to one specific format?
Dell Windows XP 80 gb iPod (5.5 generation)
PC Windows XPLooking for some help. Last few times I've connected my iPod to my computer, it won't let me eject it after the update is complete. When I click either eject button, I get a message claiming that some of the files are being used by another program and it can not eject the iPod. However, I have no other programs running at anytime will iTunes is running. I end up going into My Computer and ejecting the drive from there, but I really should be able to do it through iTunes.
Anyway of finding out what the files that are being "shared" are? Should I convert all of my files to one specific format?
Dell Windows XP 80 gb iPod (5.5 generation)
PC Windows XP -
I dont think ill be using windows for much more than revit and autocad (i use autocad on the mac side, but just in case), but i want to make sure I am not going to have a problem in the future.
I am a grad student in interior design, and have access to a windows computer (if i absolutely need it).
I will be basically just using those two programs, but of course other things will probably eventually get installed also.
Does anyone who uses bootcamp for those programs have any input as to how much space i should set aside, without giving way too much space to Windows? Windows itself seems to take up a lot of space anyway... looks like 24Gigs just for windows! ugh.
I prefer to use the mac side, so id like to keep as much free space on that end of the spectrum as possible, but it seems like a hassle to change the partition, and id like to avoid it if at all possible. (dont want to pay for any re-partitioning programs either. School has bled me dry already.
I have a macbok pro 13-inch (mid 2012).
Thanks everyone, i appreciate any guidance.I have a 1TB drive in my iMac and set aside 160GB for the Win7/64 partition, and I'm not running anything as demanding as CAD programs. I've not used AutoCad personally but the drafters I worked with did, and always got the the fastest computers with the biggest hard drives. A development engineer was always overjoyed to get a computer the drafters cast off!
I'm not sure "too much" is the problem. I'm concerned about too little. I think with a 750GB drive that 200-250 might be more realistic fpr a CAD program. It all depends on how much swap file activity the programs use.
If someone with AutoCad experience doesn't show up here, it may be time to search the AutoDesk web site and forums to see what people consider the smallest HD usable assuming you are off-loading completed projects to external storage.
While on the AC support site or forums, also find out if the Intel HD 4000 integrated graphics in your MBP is considered workable video hardware. It's not as powerful as the hardware in other MBP models and desktop Macs.
RAM: A few months after installing Win7/64 in my iMAc quad-core i7, I found a great buy on RAM and trebled my RAM from 4 to 12GB. I did not see a big difference in the Mac side but noticed better performance on the Win side including better scores on MS's performance scoring system. You may need to add RAM if you have the stock 4GB. -
Using iPad mail program I have a draft of an email. I have attempted to "cancel" this and "delete draft" but the email stays on my screen. How can I exit this so that I can use other email functions?
Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I have a fully paid subscription to CC and use of installed programs but I can no longer sign in to CC. It repeatedly says "You've been signed out". I have the need to install another program but I can't sign in.
Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html -
I have been trying to figure out the answer to this all day I want to purchase The Interview I know you can download but I want to know if you can watch it offline without using the iTunes program like will i get the file to this movie i purchased?
Thank you i been looking for a answer to this all day but I couldn't find anything on it! Now I know I will find a file with it! thanks!
-
I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.
Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive. -
OneNote recordings "We're sorry, we can't open the file because it is in use by another program."
Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
Please help, this would make note taking so much easier.A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek -
Report to check authorization object used in customized programs
Hi Guys,
An auditor came and he raised a question to us, he asked whether all of our customized transactions and programs are maintained with authorization checks? The question is how can we check what authorization objects are used for our customized programs and transaction codes? The developer did not maintain the objects used for that program in SU24 table. Is there a program or a report to show us all the authorization object used for a customised program or transaction? Example : T-code MIGO we can check in SU24 table for all the authorization object used. How do we check for customized tcodes? Please advise. Thanks!
Edited by: Jarod Tan on Nov 25, 2010 9:42 AMNote that some programs are built in such a way that no (visible) auth check is necessary, or even desired at all.
To determine the necessity of an auth check, you should check that starting it has an entry point (tcode, rfc, service) which is appropriately restricted. The rest (whether and where and how a further check is evaluated) is entirely dependent to what the program actually does.
Well designed applications generally have centralized functions and methods, and the checks are in there or a "base check" they use.
Others again use the same in UI programming to determine the visibility of functions, to make the application more intuitive for the user. This on it's own is however not a sufficient auth check to rely on.
Code review is an art form!
Cheers,
Julius -
Populating the Addressee field using Customer Interface program
Hello All,
Can any body tell me how to populate the "Addressee" column in the HZ_Party_Sites table using Customer Interface Program. Which field should be populated in RA_Customers_Interface_All table inorder to populate the "Addressee" field.
Thank you,
VijayYou can post this thread in this
Customers as well.
Thanks
GM -
Use abap report program to print bar code instead of smartforms
Do anyone know how to use abap report program to print bar code?
Hi Celina,
http://searchsap.techtarget.com/tip/1,289483,sid21_gci839063,00.html
I hope this will help, also it depends on the barcode type like ARTNR-code 128...
Regards,
Sudhi -
I have 2 iPods/want to use 1 iTunes program
Can I use one iTunes program (music library) for both of my iPods?
These links should also help:
Natalie Beresford, "Multiple iPods/iTunes Installations", 04:04am Nov 26, 2004
How to use multiple iPods with one computer
How to share music between different accounts on a single computer -
How to use another java program to stop this running prpgram???
Dear Sir:
I have following code and I run it success,
import java.util.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.*;
public class CertainAndRepeatTime{
public static void main(String[] args) throws IOException{
int delay = 1;
Timer timer = new Timer();
ActionListener actionListener = new ActionListener() {
public void actionPerformed(ActionEvent actionEvent) {
System.out.println("Hello World Timer");
System.out.println("What do you want (Certain time or Repeat time)?");
System.out.print("Please enter \'C\' or \'R\' for that: ");
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
String ans = in.readLine();
System.out.print("Please enter ans=" + ans + " IsTrue= " + (ans.equals("R") || ans.equals("r")) +"\n");
if (ans.equals("C") || ans.equals("c")){
//System.out.println("This line is printed only once start...");
timer.schedule(new TimerTask(){
public void run(){
System.out.println("This line is printed only once.");
},delay,1);
else if(ans.equals("r") || ans.equals("R")){
timer.scheduleAtFixedRate(new TimerTask(){
public void run(){
System.out.println("This line is printed repeatedly.");
},delay, 1000);
while(true){
//System.out.println("Charles print This line is printed repeatedly.");
} //This will make your main thread hang.
else{
System.out.println("Invalid Entry.");
System.exit(0);
System.exit(0);
}But I hope to use another java program to stop it when it is running instead of pressing CRTL + C to stop it.
How to do it??
Any example??
Thanks a lot!!Sorry, I think i did not express cearly. It is my fault.
I re-write my requirements again:
I have
Class AAA1.java,
Class AAA2.java,
Class AAA3.java,
Class AAA20.java...
etc
they all look like the program I posted first time,, once executed, they will run for ever, and they will be stopped until I press CRTL + C;
Now I hope to use another java class StopProgram.java to stop them 1 by 1 or at once instead of pressing CRTL + C;
In this case, how to code this StopProgram.java ??
Thanks
Maybe you are looking for
-
Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC. fstab: UUID=32130a0b-
-
"cellular network is no longer available" since upgrade to OS 3.2.2
Since I upgrade to OS 3.2.2 I cannot connect to cellular network. Turned on cellular data in settings, still shows "No Service". Tried reset network settings, tried reset iPad, tried restore. I can check my account and verify I have data plan. Any su
-
My itunes does not connect to the underlying music files on my external drive. When I try to play, I get the dreaded exclamation point and "file not found" message for all. While I could click on each of the 10,000+ songs and reassociate the file to
-
Cannot get full widescreen picture (16:9) via VGA
I'm trying to setup my LCD HDTV as an external monitor for my MacBook. The issue is that the TV is not displaying a full 16:9 image from the MacBook; it's only showing a 4:3 image, so there are large black bars on the side of the picture. Setup - TV:
-
In screen painter I am unable to attach the folder with the respective matrix. Please give the complete method to attach the above mentioned.