AP 1140 conifguration for a survey

Hi,
I am all new to this. I have a stand alone 1140 AP and i am trying to perform a site survey using the AP; However I dont know what configs need to be on the AP for the survey ? can you help me please?

This What I have on the AP right now.
the ssid "Survey" needs to be brodcasted for the Survey? if so how can i set ip up on th eAP?
no aaa new-model
dot11 syslog
dot11 ssid Survey
authentication open
authentication key-management wpa version 2
username Cisco password 7 05280F1C2243
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid Survey
antenna gain 0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid Survey
antenna gain 0
dfs band 3 block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
no keepalive
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
line vty 0 4
login local
end

Similar Messages

Configuring 1142 to use for site survey.

Just got in a bunch of the 1142 N-A-K9 APs. I need to set them up to do a site survey with.
Don't seem to be able to find anything on the site.
Has anyone used yet for site surveys? The radios are off by default.

You can survey with 1142. You can do two ways in lightweight mode. One would be to use it with 2106. This could be cumbersome as you have to carry around UPS so you can power the 2106 and use PoE on 2106 to power 1142. This way you can adjust channels and power levels on the AP as you see fit from cell to cell. Second method would be to configure the AP for HREAP mode on the controller and assign your custom power levels and channels. Then you can just use that AP without the controller to survey and power it up thru a PoE battery pack. The custom power levels stay on both 2.4 and 5 GHZ radios but channel only stays on 2.4GHz. Due to FCC and DFSS the 5GHz channel will most likely change each time you boot the AP. If you keep the AP on the battery pack for the duration of the survey it will stay on the same channels. So the negative to the HREAP mode survey is that you can't adjust channels and power levels as you move from cell to cell easily as you would have to connect it back up to the controller. Surveying with 1142 is helpful as from my experience they have a better footprint than 1131s. Hope this helps.

Can any one tell me if Adobe is sending out emails for a survey by CEB?

Can any one tell me if Adobe is sending out emails for a survey by CEB?
Is this legit?
Thanks in advance and steer me to the right place if this is the wrong place to ask this question.

I don't know, Drdeboal, but I got one, too ~ I blah blah blah adobe.com ~ I did a quick lookup and couldn't find much except that one or two other co's who had used them for surveys used those co domains, so I deleted.

How to create an Action Profile for a Survey

Hi
Can you please help me with the steps to create an Action Profile for a Survey. Eg. If the user creates a like Lead / Service, Action profile assigned to the Transaction type has to trigger the Survey.
Thx

Hi Kalees,
Survey is nothing but a Questioner that is Represent the Feedback for a Particular Transaction.
Controlling Survey by a Action Profile is possible to some Extent indirectly.
One way of Controlling the Survey Execution based on System Status
Go To:Customer Relationship Management>Transactions>Settings for Activities>Questionnaires>Define Determination Criteria for Questionnaires Define a Criteria Set for a Particular Status,Here what ever Status Assigned are Responsible for the Survey Form to Appear in that Transaction Type at that Particular Status.
In Define Determination for Questionnaires: Business Activity:assign the Criteria Set that you have Created to your Survey Form
Go To:Customer Relationship Management>Transactions>Basic Settings>Status Management>Change Status Profile for User Status The Status Profile that you are using Ensure that the System Statuses are Assigned to a User Status on which you want the Survey Determination to Happen.
Direct Action Trigger for Survy Form is not Possible
This is one way to Control the Transaction Type Status and in mean you shall indirectly get Control over the Survey Form
Hope it Answers your Queries..
Thanks and Regards,
RK.

UCCX Scripting for customer survey

Hello All,
I have below customer survey requirement,
First Script
1) Call fro PSTN , called to toll free number which is land to IVR Port number at UCCX end
2) agent will answer the call.
3)agent will ask customer to submit survey online.
4) agent will transfer the call to trigger (eg. 2033) for customer survey , run the external script.
Second Script
1) Customer will get some prompt and menu option to fill the survey.
Now i am getting challenge to get the agent extension in second script which i wanted to store in database

That's a good point. The Calling Number value from Get Call Contact Info changes from the Agent to the Customer at the point in which the Agent completes the transfer. If you simply played a prompt which informed the Agent when it was ok to complete the transfer, then you will have ample time to grab the Agent DN for your records.
Call Flow of Second Script
Start
Accept
Get Call Contact Info to Grab Agent DN
Play Prompt "Agent DN Recorded. Please complete transfer now"
Delay 3 seconds
Begin Survey
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Sending Reminders for SharePoint Survey

Hi,
Is there anyway to generate a SharePoint survey in such a way that, it is sent out as a task to all the responders and a due date is set by which they are supposed to respond. As the due date is approaching, is it possible to send a reminder?
A default SharePoint Survey list App does not offer this functionality. Any approach using SharePoint workflows?
Thanks,
techie

techie,
In that case above solution will not work as they will run on each item. But you want a workflow
for a survey list and wanted to send reminder email to them who didn't responded to survey yet.
For that I will suggest you
to create a list of user who need to respond to survey
Create a custom timer job which will run daily(configurable anyway) and check whole survey respond and above list to identify who didn't participate yet.
then will send a email.
How to create a SharePoint custom timer Job
Create and Deploy Custom Timer Job Definition
in SharePoint Programatically
Creating Custom SharePoint Timer Jobs
Step
by Step procedures to create a Timer Job in SharePoint 2013
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Cisco 3502i in autonomous mode - for site survey

Hi,
Last year I was able to load autonomous mode IOS to a cisco 3502i to do the site survey using instructions at following thread.
https://supportforums.cisco.com/thread/2084624
This year I have to do site survey for a different site and need to do the same process. However on the CCO I don't see the autonomous image. Under downloads -> products -> wireless -> access points -> Cisco 3502i I see IOS link and when clicked there is gives
ap3g1-k9w8-tar.124-23c.JA4.tar. I even loaded that IOS but it seems to be light weight mode IOS.
After reading a few different threads somebody clarified that K7 = IOS and K8 = Lightweight. However I can't seem to find the lightweight mode anywhere.
https://supportforums.cisco.com/thread/2140629
Can somebody guide me? I need to run this code only for the site survey and totally understand the fact that Cisco would not support such configuration.
Thanks in advance,

Sorry to inform you but there is no autonomous code for the 3500. You could however use the 1140 code. But this not supported by Cisco but it does work ..
Sent from Cisco Technical Support iPhone App

Action with a condition that checks for a survey filled in a transaction

Hi!
I need to create an action with a condition that checks if there is a survey filled in the complaint document.
Is there any way to do it?
Thanks a lot!
Susana Messias

Hi Siva,
Thanks for the document.
My scenario its the following:
I have a complaint with a survey assigned to it. I need to create an action that creates a follow-up task to the person responsible when the status is equal to Completed and the survey it's not filled.
I customized the action profile as you said, but the problem is to create a condition with the information about the survey. The field status it's ok to insert in a condition, but how about the survey?
Any ideas?!
Susana Messias

How to create values for a survey on creating an Activity

Hi,
How can i obtain the template for answers of a survey so that i can fill in my question/answer combination and attach it to a new activity?
I have been able to find the MF 'SURVEY_TEMPLATES_GET' which returns me an internal table of 'values template' which actually is an XML string. The XML however doesn't contain all the possible answers / questions.
My idea was to get the template XML, clean the values and fill in my own and finally add the survey answers to an activity using FM 'CRM_ORDER_MAINTAIN'.
Does anyone have an idea on how i can proceed?
P.S: The solution is to be implemented on CRM 4.0
Thanks in advance.
Regards,
Indradeo
Edited by: Indradeo Digumber on Sep 29, 2011 3:57 PM

Hi Marisa,
Thanks for the tip. I'v actually been able to find a solution. Luckily SAP has got some classes that does the xml answer manipulation. Here is the algo :
1. Create an instance of the class cl_crm_svy_runtime to obtain the survey template:
CREATE OBJECT go_svy_runtime
   EXPORTING
     i_application_id = 'CRM_SURVEY_ACTIVITY'
     i_survey_id      = 'MULTI-APPEL'
     i_survey_version = '0000000001'
     i_language       = 'F'
     i_media_type     = svydb_mtype_screen
     i_valueguid      = space
   EXCEPTIONS
     survey_not_found = 1
     values_not_found = 2
     survey_outdated = 3
     OTHERS           = 4
2. Get the survey template (xml):
CALL METHOD go_svy_runtime->get_xml
IMPORTING
    e_survey_xml     = xml_content .
3. Create an instance of the class cl_crm_svy_values (to be able to manipulate the values):
CREATE OBJECT go_svy_values
EXPORTING
    i_internal_values_xml   = xml_content
EXCEPTIONS
    error_in_generation     = 1
    error_in_parsing        = 2
    error_in_transformation = 3
    OTHERS                  = 4.
4. Set your survey values (question, answer, values):
CALL METHOD go_svy_values->values_set
EXPORTING
    i_question_id = 'q1'
    i_answer_id   = 'a1'
    it_values     = lt_values.
5. Convert the values back to xml:
CLEAR xml_content. " Important!
CALL METHOD go_svy_values->update_values_xml
IMPORTING
    e_public_values_xml     = xml_content
EXCEPTIONS
    error_in_generation     = 1
    OTHERS                  = 2
6. Convert the xml to hexadecimal:
CALL FUNCTION 'CRM_SVY_DB_CONVERT_STRING2HEX'
EXPORTING
    s = xml_content
IMPORTING
    x = ls_survey-valuexml.
7. Build the survey structure and call the crm_order_maintain FM:
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
    it_survey         = lt_survey
CHANGING
    ct_input_fields   = lt_input_fields
EXCEPTIONS
    error_occurred    = 1
    document_locked   = 2
    no_change_allowed = 3
    no_authority      = 4
    OTHERS            = 5.
And this should enable you to add add the values dynamically to your activity. Sorry for not providing more detailed information, i'm currently completing the development. Feel free to contact me if you have questions about the solution i have found.
Regards,
Indradeo Digumber

Integrating OM/PA to use as target group hierarchy for web survey

Hi there,
I am planning to use the existing PA and OM structure from R/3 system to be use as the Recipients(Target Group Hierarchy)of the Web Survey/Questionnaire.
Need anyone's advice on how to go about the connection (betw. R/3 and SEM) whether to use RFC or ALE?
Also, I noticed there are 2 transactions to create Web Survey. SURVEY and USUR0. I have been using SURVEY to work on. When does USUR0 is to be used?
Thanks all.

Hello gurus,
I know this question was done long time ago. I am new with surveys.
Did anyone solved the issue? I am facing with the same problem.
I have create by "ubds" transaction the entry for the aplication "UWS_SURVEY_FORM_SERVICE" and the class.
Then in the class via se24, I have created several methods.
When I choose extras -> Target group herarchy-> Import from aplication appears: "No suitable methods were found" .
I dont know how to do it, maybe is because the name of the method is wrong. Should this have any special name?
Thanks a lot.

Making a form for a survey?

How can I make a form, so it sends results to file, mabey a
.txt, or something, and send it to a page saying it was sent, a
custom page of my own?
Dreamweaver MX - Version 6

> I ned it just to like, tell how u got here, and why u
came, and my sever uses:
That's not a survey- do you want a contact or information
form where what
the user enters is emailed to you?
>
> Hosting OS Proprietary *nix
> PHP version 4.4.1
> Perl version 5.8.4
> MySQL version 4.0.24
Does this hosting have a Control Panel or Cpanel?
Look in there for in Scripts or similar for formmail clone
instructions.
or- use this tutorial for information
http://apptools.com/phptools/forms/
Or- use phpformmail from boaddrink.com.
Build your form (do not use "Layout Mode", use regular table
editing under
dw View menu)
see this older posting for quick instructions on phpformmail:
details:
1)go to
http://boaddrink.com
-->phpformmail
download it.
http://www.boaddrink.com/projects/files/phpformmail/phpformmail_class...
.2.zip
extract the ZIP file.
2) open formmail.php in dreamweaver
Make the following changes (in code view, turn line numbers
on)
2a)
line 4,
define('CHECK_REFERER', true);
change to:
define('CHECK_REFERER', false);
reason: too many people use a firewall or Norton security to
restrict this.
2b)
Line 43
$referers = array('www.example.com', 'example.com');
change to the url address of your web site.
reason: this probably isn't needed since we just turned the
referrer
checking off. but change it anyway.
2c) *********this is the hard-coding of the recipient
address into the php
file, where it is totally invisble**********
Line 46
$recipient_array = array();
change to:
$recipient_array = array('me' =>
'[email protected]);
**put YOUR email address in to replace
[email protected]
reason: this sets the email address the form results will be
sent to.
3) now do a File-->Save As and save this file to within
this Local Site
folder.
4) in dw's File Panel, find formmail.php and upload it to the
remote site.
5) Now open your form html file in dreamweaver,
5a)click the mouse into the form area, and select the
<form> tag on the
lower left margin of the design window.
In the Property Inspectory, it should now show the properties
of the <form>
tag. In the Property Inspector, to the right of the ACTION
line, click the
folder icon and browse to and select the copy of the
formmail.php file
you've saved to within this site.
5b) now go to dw menu-->Insert-->Form
Objects-->Hidden Field
This inserts a hidden form field.
In the property inspector, change the NAME of this field to:
recipient
And the VALUE of this field to: me
the code should look like:
<input name="recipient" type="hidden" id="recipient"
value="me">
6) Save and upload the form page.
Try the form from the website.
Optional:
make a new page for a thank you for submitting message.
In the form, insert another hidden field.
Name: redirect
Value: the full absolute
http:// address to the new thank you page.
There is other information about that script in the Docs
folder.

How to receive and evaluate customer feedback for Makreting Survey?

Dear all,
We need to send a Customer satisfaction survey to a target group and we have to get the feedback from customers.
How can we know that, how many customers selected the same answer for a specific question, and how can we evaluate the answers based rating factor.
I know 'Evaluate without BIW' option, but how this report looks like?, and can we get the detailed analysis from this report. We are using CRM 7.0 and we don't have BIW in our Landscape
Please educate me in the above scenario as it is an immediate requirement from client side. Your help will be highly appreciated.
Best regards,
Raghu ram

The SAP Library has a good starting point with examples that should offer some insight into how to work with the Campaign Automation, which is how you could process the specific survey responses...otherwise the area you've already found is where you can check for more generalized data (How many people answered Yes/No, etc.)
Specific answers are typically tracked by adding the respondents to various Target Groups for subsequent processing.
http://help.sap.com/saphelp_crm60/helpdata/en/46/0ac0da293114dbe10000000a155369/content.htm

Config for using 1242 for site survey

Hello, i'm helping a coworker, we have a 1242 and would like to use it for a site survey, but we are not able to activate the radio using conf t it is in light weight, are we missing something? were can i find a config example to use for this purpose?

Hi Alfred,
Converting a Lightweight Access Point Back to Autonomous Mode
You can convert an access point from lightweight mode back to autonomous mode by loading a Cisco IOS Release that supports autonomous mode (Cisco IOS release 12.3(7)JA or earlier). If the access point is associated to a controller, you can use the controller to load the Cisco IOS release. If the access point is not associated to a controller, you can load the Cisco IOS release using TFTP.
Using a TFTP Server to Return to a Previous Release
Note This section does not apply to Cisco C3201WMIC and Cisco C3201LAP.
Follow these steps to revert from LWAPP mode to autonomous mode by loading a Cisco IOS release using a TFTP server:
Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.
Step 2 Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated.
Step 3 On the PC where the TFTP server is located, perform these steps:
a. Disable any software firewall products, such as Windows firewall, ZoneAlarm firewall, McAffee firewall, or others.
b. Ensure all Windows files are visible. From Windows Explorer, click Tools > Folder Options > View > Show hidden files and folders.
Step 4 Rename the access point image file in the TFTP server folder to c1200-k9w7-tar.default for a 1200 series access point, c1130-k9w7-tar.default for an 1130 series access point, c1240-k9w7-tar.default for a 1240 series access point, and c1250-k9w7-tar.default for a 1250 series access point.
Step 5 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
Step 6 Disconnect power from the access point.
Step 7 Press and hold MODE while you reconnect power to the access point.
Step 8 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
Step 9 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
Step 10 After the access point reboots, reconfigure it using the GUI or the CLI.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272
Hope this helps!
Rob

Tools for wireless survey

Do any partners use tools they feel are easy to determine cell overlap for wireless deployment? We use the 7921 phones survey tool but are looking for feedback on what else is used in the field.

We have a non-production WCS server that can be used for predictive assessment by uploading the map or you could use AirMagnet Surveyor to perform real-time data collection. Other than that I suppose you could take readings with NetStumbler or another wireless RSSI utility to ensure coverage/overlap.

BSP Application for creating surveys in EP 6 & 7

Hello friends,
I have been searching for a BSP application that supports the creation of surveys in EP 7, although this function should have been available in teh standard EP Role (campaign manager:com.sap.pct.crm.campaignmanager)
can anyone help me in finding this role or the BSP app.
thanks,
HM.

Hi,
Please avoid double posting in differnt categories.
Replied to in creating users in EP 6.0 from BSP application

AP 1140 conifguration for a survey

Similar Messages

Maybe you are looking for