Ap Config Import Error

Has anyone seen the following error when trying to import an ap config CSV file.
When they reference the logs...which log pretends to this error?
Thanks
izzy

I would say those exceptions always happening with Java products of Cisco.
You need to open a Cisco TAC case for them to collect logs and see in details (in programming view) why this exception is happening.
From my experience this may take sometime because the TAC engineer usually have no idea about the programming so he forward the logs analysis to a programmer who can understand.
If you can open a TAC case then this should be your next step.
Good luck.
Amjad
P.S: The main reason of most such exceptions is bugs.

Similar Messages

Programmatic MAX Config Import Errors

I am trying to programmatically import a MAX configuration file using the MAX Copy Configuration.vi as shown here:
The above code works fine as long as the configuration that I am importing uses the same names for the devices being configured. I have a USB-4432 device that I have named "USB-DSA" within MAX; if I run the above snippet, it will update the configuration of the channels on that device (that's the only device I included in the configuration export that originally generated the *.nce file). However, if I change the name of the device (i.e. if I delete it and reinstall it and let MAX auto-generate a generic name), the import function fails. The error message I get is as follows:
Which I assume is because user input is required to select which device to use. If I were to manually import the file in MAX, I would be met with the following dialog:
So, it would seem that the programmatic import will not work because it requires user input. But, since the VI is password-protected, I can't even dig in to add dialogs or address the problem in any way.
Has anyone else run into this problem and come up with a workaround? I would like to be able to programmatically import a configuration without knowing a priori what the devices are named, particularly for new systems that have just installed the USB DAQ device (since I can't guarantee that the generic name given by MAX will be the same for each one).

Thanks for the reply. I figured that was the problem; it's a shame that there isn't a better way around the problem, without forcing the operator to open up MAX and go through the steps manually.
I really want to be able to have a system configure itself automatically; I want be able to ship a USB DAQ device and an installer CD with my program on it and have the end user just run the installer and plug in the device and be ready to go. I would really like to avoid requiring the operator to go into MAX at all, if possible.
I know I can include a MAX configuration file in the installer build, but I am afraid that I will run into the same problem. If the installer includes MAX and DAQmx, then it will need to be installed before the USB device. So, presumably, it will install the software and import the configuration, and since the USB device has not been installed yet, it will create a simulated device. When the USB device is connected, it will just be given a new generic name, and all the virtual channels included in the imported config will still be mapped to the simulated device.
It sure would be nice if there were a way around that problem...either to programmatically rename devices, or to programmatically handle the create/replace device dialog on config import...

"Template import error: No VM configure file found" on brand new setup

Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
[2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
[2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
[2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
[2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
[2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
[2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
[2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
[2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
[2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
[2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
return func(*args)
File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
raise RuntimeError('Template import error: %s' % err)
RuntimeError: Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
[2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
[2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
[2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.

How did you get the template to where you staged it?
I'd say the template is corrupt or you only have a partial template.
I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name?

FDMEE Import error "No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'

Hi,
We are having trouble while importing one ledger 'GERMANY EUR GGAAP'. It works for Dec 2014 but while trying to import data for 2015 it gives an error.
Import error shows " RuntimeError: No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'."
I tried all Knowledge docs from Oracle support but no luck. Please help us resolving this issue as its occurring in our Production system.
I also checked all period settings under Data Management> Setup> Integration Setup > Global Mapping and Source Mapping and they all look correct.
Also its only happening to one ledger rest all ledgers are working fine without any issues.
Thanks

Hi,
there are some Support documents related to this issue.
I would suggest you have a look to them.
Regards

How do I convert an excel (2008) document to Numbers? When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid"

How can I convert an Excel (2008) document to Numbers. When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid.

That extension identifies the most current Excel file format, a format that can be opened by Numbers '09 (and by Numbers '08).
A check with Numbers '09 shows it capable of opening .xlsx files when right-clicked (and Numbers chose as the application to open, when double-clicked (if Numbers has been set as the default application to open this type of file, or when dragged to the Numbers icon in the dock.
I see two possibilities for Numbers inability to open it and the message you receive:
1. The file is not actually an Excel file, and the sender has added the .xlsx extension to the filename manually.
2. The file is an Excel file, but has somehow been corrupted.
Have you tried opening the file with a different application? The open source Office suites, OpenOffice.org, LibreOffice and NeoOffice can also open .xlsx files. If they're unable to open this one, that would point toward the file itself being faulty. You can download these applications from their rspective websites, linked in the names above. All request a donation to support future development, but only Neo requires one to have been made recently, and that only for the current release (which won't be necessary to open .xlsx files).
Regards,
Barry

File Import Error - Adobe Media Encoder, help!

I'm at a complete loss. AME worked very well for me for a long time and booting it up yesterday gave me a paralyzing error.
Upon trying to import an MOV, MP4, and later a WMV, I received the following error:
File Import Error
The file C:\Users\tj\Desktop\New folder\SH_GS_PeekPlay_DEMO_720.mp4 could not be imported. Could not open source file. Please check that file exists with correct permissions.
I've tried everything I can think of:
1. Moved the file off the server and onto my desktop.
2. Double checked file permissions (all of which I have)
3. Uninstalled AE and Premiere to try to get rid of Media Encoder.
4. Searched for a way to uninstall AME so I could put a fresh install (can't find how to do this)
5. Manually updated AME
6. Reboot (multiple times between these steps)
7. Contact customer support - no help thus far.
I'm running Windows 7 64bit with Adobe CC and AME 7.0.1.58

Tried that as well.
To rule everything out, I had the files placed:
1. On company internal server
2. External Harddrive connected through Firewire
3. Internal Hard Drive (with OS)
4. Internal secondary Hard Drive (data only)
5. On Desktop (technically 1st internal drive)
I have since fixed this by uninstalling every single Adobe application (including Flash and Air) and redownloading and installing each.

Getting import error in jsp in creating war project of masthead for portal 7.31

Hi,
I am getting error in customize masthead war project in jsp for import statement.
<%@ page import="com.sapportals.htmlb.*"%>
<%@ page import="com.sapportals.htmlb.hovermenu.*"%>
<%@ page import="com.sap.security.api.UMFactory"%>
<%@ page import="com.sapportals.portal.prt.service.license.ILicenseService"%>
<%@ taglib uri="prt:taglib:tlhtmlb" prefix="hbj"%>
I have asked basis team for jar relative to these but they have not found in system.
We are using portal 7.31 version.
Kindly help me to remove this error from jsp.
Thanks in advance.

Hi Hemendra,
At first i have done this and after that even i was facing error that's why i created this thread.
Kindly check my first post for error.
Getting import error in jsp in creating war project of masthead for portal 7.31
This question is Not Answered.(Mark as assumed answered)
Swati Joshi Apr 29, 2015 12:34 PM
Hi,
I am getting error in customize masthead war project in jsp for import statement.
<%@ page import="com.sapportals.htmlb.*"%>
<%@ page import="com.sapportals.htmlb.hovermenu.*"%>
<%@ page import="com.sap.security.api.UMFactory"%>
<%@ page import="com.sapportals.portal.prt.service.license.ILicenseService"%>
<%@ taglib uri="prt:taglib:tlhtmlb" prefix="hbj"%>
I have asked basis team for jar relative to these but they have not found in system.
We are using portal 7.31 version.
Kindly help me to remove this error from jsp.
Thanks in advance.

Error faced during installation of EHP3 on ECC 6.0 (Test Import Error) ?

Hi
i am facing an error while installing EHP3 on ECC 6.0
my current level :
SAP_ABA 700 0017
SAP_BASIS 700 0017
SAP_BW 700 0019
SAP_AP 700 0013
all other SAP_APPL , ERECRUIT are on 600 level more then 11
I downloaded the ENH3 FOR ERP6.0 content from market place
I loaded them with SAINT and continued , i removed all other warnings of support package in SAINT by taking appropriate support packages .
Problem: I am getting Test Import errors
1)For EAAPL(60301) ---> error code 08
Function API_RE_CD_GET_CASHFLOW_CN (RECD_API_CONDITION 01) does not fit into the existing function group ((RECD_BAPI_CONDITION 21
2)FOR FI-CA(60301) --->error code 08
Function FKK_DB_LOCK_SINGLE (FKKLOCK_DB 04) does not fit into the existing function group ((FKLOCK 11
3)For ISM (60301) -
> error code 08
Function ISM_SD_RETURN_RELEASE (JKSDRETURN03 01) does not fit into the existing function group ((JKSDRETURN100 01

Hi
Yes i have checked the previous SPS levels of these components its 13 and i used 603 SP level 02 of these components for installation as per told by you while defining a installation queue as well as support package selection in SAINT but still am getting the error. In SAINT i even got in remarks filed a message that "extended queue is consistent and matchesthe selected target packages". I am getting "TEST IMPORT ERROR ...."
I am getting return code 08 for components listed below in TEST IMPORT phase :-
1) EA-APL (603 SP level 01)
2) FI-CA (603 SP level 01)
3) ISM (603 SP level 01)
4) EA-DFPS (603 SP level 01 & 02)
Please help me out and suggest something.

Word to Pages "Import Error"

I have a load of files created by drag and drop editing of pdf files into Word tables. I want to use pages to edit these ... it should be easier with services. Most of the files open fine, but a few give me an Import Error. Any ideas? There are no obbvious differences between the accepted files and the rejected files. I mightjust gie up with Pages, leaving it for the Mrs to play with ... Keynote seems nice though!
(Sorry is this has been asked and sorted, but search is off-line and I couldn't find it in the messages when I browsed)

Julian,
Pages simply won't support a table with that many rows. If you need that many, you must use another application.
Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
There are probably other ways, but that's what comes to mind here.
Jerry

Excel Import Error

I am getting this message:
Import error
This document was created with an unsupported version of Excel. Only documents created with Excel '97 or later can be opened.
I have searched and haven't found a solution.
This file was created in Open Office and has been edited in Excel 08(mac). Clearly not an old version of Excel. I have opened it in Open Office and re-saved, but Numbers still won't open it.
Weird.
Kirk

Found the answer. Both Excel and Open Office were saving the file back to version 5.0.
After forcing a resave and specifying a newer file type, it opened in Numbers.

Why do I get "Import Errors"?

I just shot 16 clips with my Canon HD camcorder (AVCHD). I put the memory card in my desktop computer (Windows7) after I had PrE11 running. Then I clicked Video Editor/New Project/Videos from Flip cameras, AVCHD cameras.
I saw all my clips and I clicked on some in the Preview window. They played OK. But when I clicked on Get Media I got this message: Import Errors/ Error Message/File already exits at C:\Users\Tommy\Videos\
What's happening? I didn't change the Presets: File Name, and Name:Untitled.
Can someone tell me what to do to get my new clips into the Timeline.
By the way, the clips I just took were the only ones on the memory card.

Tommyvincent
This is my take on your situation based on what I understood from your description:
However you did it (maybe hitting some buttons more than once or other) your videos got imported and saved to C:\Users\Tommy\Videos\. Did you look to see if they were there? If not, please take a look in that area to confirm or refute.
If they are in my video already as I suspect, then you have at least two choices
a. Import them into Premiere Elements 11 with the program's Add Media to get them into Project Assets (correct project preset)
or
b. delete them from C:\Users\Tommy\Videos\ and then repeat the import using Add Media/ and the Video Importer route that you wanted to use.
Please review and let us know the outcome.
Thanks.
ATR

Windows LV6.0 running on Linux Wine: config.cpp error (line 404)

Have anyone tried to run LabView (Windows version) under Linux using the Wine "emulator"?
Trying this on Debian Woody, with a Win98 install of LabView 6.0 returns:
config.cpp error (line 404)
I tried to search for such a file on both Win/Linux partitions: there's none.
So how am i gonna check this line 404?
Any clue would be strongly welcome!

I agree with Labviewguru about getting Labview for Linux. The only
problem is that you have to dish out $2000 or $3500. They don't have a
Base package.
I'm not sure if NI recomends a particular window manager but I do know it
will run on any of them. In an extreme case I used it on a PII 233MHz,
64MB ram, and a 300 MB disk. It was a Slackware distro using the fvwm2
window manager. Ran great. Presently I run it with Gnome.
My point is that if you have to buy a LV for Linux license, at least you
can save money buy putting it on a machine that's been used as a paper
weight for several years.
-kevin
In article <[email protected]>,
"Labviewguru" wrote:
> I don't believe you can run LabVIEW in an e
mulation environment. There
> is too much system control that LabVIEW needs a handle on to be able to
> run on an emulator.
>
> The reason you are not able to find and troubleshoot that file is
> because it is part of the source code for LabVIEW, and doesn't exist
> except in a super secret vault which may or may not be located in Austin
> Texas...
>
> Are you aware that there is a version of LabVIEW for Linux? I believe
> that they recommend running KDE or similar GUI, but check on the support
> website for that at ni.com/linux.
>
> I hope that was enough of a clue...

Import error with MPEG-2 files: Brorsoft Video Converter to Apple Prores.

Hi,
The Brorsoft Video Converter software gives me an 'import error' message when I attempt to import files from a folder on my desktop. That folder contains many mpg files (MPEG-2 Video, AC3). Those files in the folder on my desktop came from a Sony video camera.
I need to convert those mpg files to Apple Prores 422 HQ so I can then edit them in Apple Final Cut Pro X.
But when I go to import those mpg files into the Brorsoft Video Converter software, it comes up with a message saying: 'import error', indicating that the Brorsoft Video Converter software does not understand the type of file.
I am on Mac OS X Version 10.6.8.
I've emailed Brorsoft support but I don't think English is their first language – they've emailed back to me asking for clarification of the problem. And I need the problem fixed as I have to edit this video for someone that has many waiting customers.
Could something have changed in the files when I copied them from the video camera to the desktop?
Thanks in advance.
Cheers,
Paul

Hi Tom,
Thanks for your prompt reply. I was using a friend's video camera – I've just texted him for the exact model of Sony video camera. I didn't yet have the Brorsoft Video Converter software when I had to give the video camera back to my friend. So, I copied the files off the video camera to my desktop.
It records onto an internal hard drive. And yes you're right, I don't need to go HQ. I also tried plain Apple Pro Res. That didn't work either. It comes up with 'Import error' message, so it seems like it just doesn't understand the file type.
When I go 'Get Info' on one of the files off the camera, it tells me it is an 'MPEG-2 video, AC3' file.
I'll try and get MPEG Streamclip like you suggested and see if that works.
Thanks again.
Cheers,
Paul

Import error moving from iPad to iPhoto

Somewhat puzzled by the inability to import photos from my iPad to iPhoto.
Here's what happened:
1. Used camera connector to transfer high-def JPG format files from a Nikon D50 onto the iPad (no problem, and the *iPad displays the pictures* perfectly).
2. Attach iPad to Mac and start iPhoto.
3. iPad is shown as attached and import window is displayed, correctly showing 176 photos to be imported but *no images are displayed*, only the dotted outline boxes.
4. Attempt 'Import All...' and an *import error is shown listing all 176 JPG files* as not imported.
5. Start Image Capture utility and attempt 'Import All', same error is reported.
6. Attempt selecting just one photo and importing just selected item (fails in both iPhoto and Image Capture with the same import error).
It looks like the iPad can read the JPG files but for some reason the Mac cannot.
Setup details:
iPhoto '08 v7.1.5
Macbook Pro running OS X 10.6.2
iPad running iOS v3.2
Image Capture v6.0.1
Any ideas?
Regards,
Mark

Updated to OS X 10.6.4 and everything seems to work correctly.
Message was edited by: mbools

Import error as error number is -12018

Hi All,
While importing a project getting an error as:
Import Error: com.fatwire.cs.core.realtime.DataException: com.fatwire.assetapi.common.AssetAccessException: Error met whiling saving assets [AttrTypes:1415189814137] and the error number is -12018
https://docs.oracle.com/cd/E29542_01/apirefs.1111/e39371/MISC/errno.html shows error related to Missing publication. No clue..

-12018 means " Missing publication."
Since the DemoSite is a new site that doesn't exist in the CSDT target environment, I would import the site first, e.g.
java com.fatwire.csdt.client.main.CSDT http://hostOrIP:8080/cs/ContentServer username=fwadmin password=xceladmin resources=@SITE:DemoSite cmd=import
NOTE: Make sure the site was exported to your datastore before import.
Then, import assets of this site:
java com.fatwire.csdt.client.main.CSDT http://hostOrIP:8080/cs/ContentServer username=fwadmin password=xceladmin resources=@ALL_ASSETS:*;@ALL_NONASSETS:* fromSites=DemoSite cmd=import
Note that the parameter is fromSites, not fromSite.
See if this helps.
Thanks,
Yu-Chun

Ap Config Import Error

Similar Messages

Maybe you are looking for