Aperture 1.5.1 Printing Contacts Problem...not the color issue.

I understand that this product is a work in progress, but a fairly basic feature, Printing contacts of all the images in my project, or printing a selective few, should work as expected.
I do not get the images I have selected at all. Even iPhoto can do that!
If I select three (or any number) images, print them as contacts...fine...the first time only. I then go select another different three images...and guess what it reverts back to the first three images, not the ones I have most recently selected. Select all images...I dont get them all. Whether they have been adjusted or external or anything. That is a fairly useless feature if you ask me. What gives?? The included book is very thin on details.
I called Apple Support and did the folowing: deleted the Aperture preference file at user/library/preferences/com.apple.Aperture.plist, and then also rebuilt the Aperture Library upon relaunch by holding the option and something key(?) as per the Support instructions and no difference. Then got disconnected on the phone Support line and ran out of time screwing around with this issue.
Has anybody else run into this? Any Suggestions? I could care less about the color management problems on this forum at this point...all I want is a contact sheet of the images selected. The color quality is a known to Apple bug...so what. How about a basic feature set working?
Thanks for any input or suggestions in advance.
John Thurston
24" Intel iMac 2.33 GHz w 256MB vRAM Mac OS X (10.4.8) 2GB Ram NVIDIA GeForce 7600 GT

Same problem here !
I get all selected pictures but some of them are printed totally damaged and just selection of picture. It seems that mostly those cropped ( From 44 just 2). Sending such Contact sheet to Publisher - is not an "best "option describing that pictures are O.K. but problem is software... ??. So I used PS - creation of Contact sheet takes a plenty of time compare to Aperture, but later on printed pictures were more acurat compare to Aperture.
I think something happened in upgrade 1.5.1. Before this worked more-less good. Contact sheet is one of most frequent output of the system when selection is going to be offered to publisher. Have you some tip how to fix a problem ?
Thank you

Similar Messages

IPhone sound problem - not the usual issues

Okay so I was listening to music in my office on an external set of speakers, and suddenly my sound cuts. The phone still says music is playing but nothing can be heard through either the built-in speaker or the external speakers. I tried the typical "trick the headphone jack" thing and no luck. When I try to play a saved voicemail and chance the volume, it indicates that the phone is using a bluetooth headset. However, I don't own one and bluetooth is off.
When I try and change the volume at the home screen it says it's in Speaker mode, and when attempting to call somebody and change the volume it claims bluetooth again. I've both rebooted the phone and restored it. I'm doubting any hardware damage because it was working when I was playing music, then it just stopped without touching it.
I'm traveling alot tomorrow and really really need my phone. Please help!!
Best Regards,
Fred

I'm having the same sort of problems. Sometimes the external speakers work and then stops working (eg keyboard sounds, etc). On other occasions when I'm using the phone, the ear speaker cuts out and only by enabling the speaker icon, can I hear the other party with the external speakers. The people I'm speaking with are unaffected and continue to hear me. Sometimes the message "(headphone)" shows on the screen. I didn't have this problem before the recent iPhone software upgrade. Must be software problem. Will reset iPhone work?? My original iPhone that my daughter has with no upgrade doesn't have this problem.

I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

Printing on paper not the same as on screen

In CS4, when I look at a preview of my print, and select 'no margins' in the printer driver, it looks perfect. Why is it that the paper print area is not the same? I mean that the image is cropped on the paper by a small amount.
I'm sure the answer is obvious, but life is being made difficult until I find it!
Thanks.

> Does CS4 have an option for this somewhere?
Not that I'm aware of. You could, however, try creating an action that would expand the canvas by a fraction of an inch in each direction and experiment with that.
It is also worth checking carefully all of the options within the print driver of your printer. Some printers have options for reducing or eliminating the borderless overspray (I think Epson refers to it as "Expansion" on some of its printers). Many don't.
QImage is also an alternative as you mention.

Problem in the "color" requested

Hello everyone, i have HP 4645 and it is amazing printer
i use it for doing some invoices from quickbooks [using color printing]
now when the the cartridges both color and black i purchased the original 650 cartridges and installed them
in our invoices headers we use a little dark red color, after installing the cartridges i printed few invoices in the same day, it was working perfectly
NOW, after few days when i want to print any invoice, the header color is not the same, it is so dark that it is not RED again, but almost black
the cartridges both are more than 90% full
what i tried to do
1. i took the cartridges off for around a min and insert them again [didnt work]
2. turn the printer on and off [didnt work]
3. went to the application for the printer --> maintain your printer --> [Align ink cartridges] and [ clean ink cartridges]
and it didnt work
so i hope i can find an answer here because the invoice now are looking horrible and hideous
best regards

Hello chunky2k,
Welcome to the HP Forums.
I see that you are having some print quality issues when printing in colour.
Please click on the following link that deals with Fixing Print Quality Problems for the HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-All-in-O...
Please feel free to write me back if you have any other question's or concerns.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My G5 iMac has a screen color problem. The color is green with lines. What can I do to repar this? Sometimes the screen will freeze and I have to reboot the computer and the screen will be normal for up to 5-6 hours and then suddenly changes back to green

My G5 iMac has a screen color problem. The color is green with lines. What can I do to repar this? Sometimes the screen will freeze and I have to reboot the computer and the screen will be normal for up to 5-6 hours and then suddenly changes back to a greenish color.

Try running in Safe mode. This leaves out some video drivers. Which results in machine not using advanced video hardware.
for more details see:
Look through this thread. see the second page.
https://discussions.apple.com/message/16057567#16057567
Robert

Can Reader pick up the Default Page Size of a printer that is not the Windows Default Printer?

We have a web based application that generates PDF documents via Crystal Reports.
We are using Adobe Reader 8
The PDF pages are displayed within an Internet Explorer window where the the users then print the document.
The application is designed so the user only gets one chance to print the document (ie they cant come back and change printer settings if they happen to print the document out incorrectly)
The document needs to be printed on A3 paper, full duplex.
We have a printer set-up decidated to the printing of the documents generated by this application. The default page size of this printer is set of A3.
If we set this dedicated printer as the Windows Default Printer we have no problems at all. The default page size (A3) is picked up and the document is printed correctly.
If any other printer is set as the Windows Default Printer (eg one that has a default page size of A4), the users must obviously select the correct printer from the Print Dialogue Box -however when the user selects the dedicated A3 printer, the page size remains as A4 (page size of the Windows Default Printer). This means the user must remember to change the paper size to A3 each time.
Out users find IT a struggle at the best of times - anything that makes the process simpler is very welcomed!
Is there a way to ensure the default page size of the printer is respected when that printer is not the Windows Default Printer?
Thanks!

No.

Scanned doc, saved as Acrobat X pdf, then edited, prints only edits not the whole saved pdf

In PS CS5, I imported a text document from scanner. I made some edits, including some paint brush (white on white) and some text layers. I saved it as a pdf and then opened it in Acrobat X 10.0.10, then printed it. Only the text layer edits themselves printed and not the rest of the original document with the edits.I think the problem lies with Acrobat, so posted here.
Win7 SP1

This is bordering on breaking physical laws. In PS the only thing that prints are the changes on created layers. The original document (background) does not print along with my changes, the same output as in Acrobat. Then in PS I saved it as a jpeg. Im looking at the image of the changed document in its entirety in the photo viewer but the same thing happens as in PS and Acrobat - only my changes (new layers) print, nothing else. Thats kinda creepy...

Why do printed contact lists wrap the data?

I want to print out all of the people I have in the Contacts app to serve as a backup. I was going to use the "Lists" style that is available, but noticed that there seems to be a bug. In the print preview I noticed that it wraps email addresses and phone numbers when there is plenty of space to not make it necessary.
Then I printed the first page and verified that it indeed wraps the content. Does this happen with other people? I don't want to print it out if its going to look like this.
Thank you!
<Image Edited by Host to Remove Personal Information>

Go into settings - messages - receive at - you can have multiple ways to recover texts such as your mobile number or multiple emails, make sure your caller ID also in message settings is exactly same as one of the received by lists and be sure your contacts have you listed by the caller I'd u chose

I am struggling to connect my macbook pro to a wireless network. Works fine with USB and my Toshiba can print wirelessly but not the MAC. Any ideas?

Hi
I cant print wirelessly on my Mac pro but can via usb. the Toshiba does work wirelessly..any ideas?

If you can use the wireless network properly (surf the web, check email, etc.) then there is probably nothing wrong with your network settings.
When you print from your Mac Pro, does the printer show up in the Printer list at all (in the Print dialog box)?
If not, have you already tried to Add Printer from the bottom of the Printer list?
If you click Add Printer and it can't see the printer, the next thing to do is probably go to the Toshiba printer web site and see if there is a Mac printer driver to download and install so that it shows up in the Printer list.

Webutil-Problem (not the usual "PRE-FORM", "WHEN-NEW-FORM-INSTANCE" etc.)

Hello,
We have an application with lots of modules, where we use webutil to create text files on the client for data exports. The export is called in a WHEN-BUTTON-PRESSED Trigger and usually works fine, but we have the following problem:
If two modules, where webutil is used, are opened at the same time and one module is closed, webutil does not function anymore in the other module. If we then try to create a text file after closing on module, we get the following error-message:
Oracle.forms.webutil.file.FileFunctions bean not found.
WEBUTIL.FILE.FILE_SELECTION_DIALOG_INT will not work.
It’s not only the FileFunctions bean, all other webutil functions do not work also anymore in the remaining module.
This is not the usual “PRE-FORM”, “WHEN-NEW-FORM-INSTANCE” etc. Webutil-Problem.
As I said before, webutil works, but when we close one module with webutil used, it does not work in another open module anymore.
Any Idea, why this happens and how to solve the problem???
Kind regards
Udo

Hello,
Yes, both modules work in the the same session and session is not disconnected, when one of the modules is closed.
Webutill.pll is attached on both forms and all forms in our application using webutil usually work fine with the exception mentioned above.
It's a bit difficult to explain, what happens in our application, but I try:
Our application consists of modules that call other modules with call_form or go_form , when the module is open, all in the same session. "Global" Parameters are passed with SHARE_LIBRARY_DATA. Usually the calling forms stays open.
In the following constellation webutil does not work anymore at a certain point :
- Open module A (with webutil attached) and webutil works
- Then module A calls module B (with webutil attached) and webutil works in module B
- GO_FORM (module A) and webutil still works (while module B is still open)
- CALL_FORM (module C) (in our case webutil is not attached to this module, but I think that is not the problem) module C closes module B (while module A stays open)
- After making a choice in module C, module C closes itself with EXIT_FORM.
- Go back to the open module A, make a new query with the choice made in module C and webutil does not work anymore in module A
Regards
Udo

IPad iOS 6 WiFi, iMessage and iTunes store problems - not the usual

When I first updated my iPad 3 to iOS 6, everything ran relatively smoothly. Then the problems started piling on, beginning with me being absolutely unable of logging into iMessage. It's always the same error message: "Incorrect password". My password is correct, I am using the password I have always used so I know it is correct. Besides that, I tried changing it and that did not matter either way.
Now, the next problem is the common "Unable to connect to iTunes store" which has been talked about a lot on here.
In an effort to try to fix that problem, I reset all network settings for the iPad and that's when the next problem began.
After I reset the network settings, I have not been able to connect to a secure network.
I have now tried
changing the encryption for the router password from WPS-SPK to WEP and back again
connecting to three different routers with three different passwords
set up multiple hotspots using my laptop with multiple passwords
resetting the network settings over and over again
and all those attempts have failed. I always get the same message as in the picture even though I know for a fact that the password is correct, my laptop accesses that network with flying colors using the same password as I tried on the iPad. And yes, I tried it again. And again and again and again.
Now, this is really annoying. Not being able to access WiFi on my iPad is f****** annoying! Please help!

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Printer driver will not allow color printing

I have a new Windows 7-64 bit OS on my new computert, and an HP CP1518ni (1500 series) color laserjet printer that has worked fine under Vista (32 bit) previously.
I went to the driver support site, since my installation disk didn't enable Windows 7, and got the universal UPD PCL6 driver, as indicated, and downloaded it (upd-pcl6-x64-5.4.0.11744.exe) and ran it.
It prints just fine in B&W, not in color. When I go to printer preferences it just says "color - no" and there I'm stuck.
Can anyone help? I can't use a B&W printer for all my work, so I can't switch to this better computer yet.
RDF78

to KB123:
did you remember setting your driver to only print in grayscale? since there is an option to do that on the drivers installed on your computer.
If you're not sure, try to go to your printer icon under Printers and Faxes (for windows XP) or PRINTERS (for Vista and 7)
Right click the printer icon and go to printing preferences. Under FEATURE tab, see if there is a check mark on the print in grayscale (its somewhere almost at the bottom of the screen)
Or else, try to uninstall the drivers of your printer and re.install.
---Click KUDOS if you want to say THANKS.

Printing contact photos and the Picture ID's simultaneously

I'm a 'newbie' at the discussions section of Apple help. What I'm trying to do is print contact pages of my pictures (which the iPhoto will do), but I would like to print the photo ID data along with the picture, so I will be able to find the particular picture quickly in my files. I can't find any way to do that.
Question: Is it possible to 'easily' print the picture ID under each contact print on a page?

Joe:
Welcome to the Apple Discussions. Threre's no easy way with iPhoto but Lori has compiled a number of workarounds in her posts in these threads:
http://discussions.apple.com/thread.jspa?messageID=950764&#950764
http://discussions.apple.com/thread.jspa?messageID=1176014&#1176014

New York City 3G Network- AT&T is the main problem not the phone

After weeks of using the iPhone in NYC, I am incredibly disappointed at the 3G data speeds/availability on AT&T's 3G network.
I originally wasn't sure whether the problem was the iPhone or AT&T (or a combination). But I have noticed that there is an enormous difference in 3G speeds during the day vs. at night at the same exact locations, even if you have 5 bars of 3G reception. The city has a high iPhone density and it seems AT&T are in over their heads.
During the day I get very slow data speeds, less than half of what I get at night in the same location. The constant reverting to EDGE, according to a Business Week article, is apparently due to the fact that the iPhone first tests available 3G bandwidth in your location before it connects to the 3G network. If the system is overloaded, even if you get 5 bars of 3G reception, it could be dumping you into EDGE. This especially happens to me when I travel to midtown and other areas of high density vs. when I am close to more residential areas. The locations I go to are capable of delivering 5 bars of 3G, it just depends what time of day it is and whether the system is dumping you back into EDGE.
I know there are many bugs/issues with the phone but as far as the 3G/data networking part, my personal experience is that AT&T seems to own most of the blame.

This pretty much renders my iphone useless during the day because hotmail times out and other web sites. I changed to iphone from sprint instinct because of network issues.
Last night I recommended a Blackberry to someone asking for a recommendation. I'll continue to do that for quite some time.

Aperture 1.5.1 Printing Contacts Problem...not the color issue.

Similar Messages

Maybe you are looking for