Aperture 3.0.1 Problem with Importing Images

The problem I am experiencing with Aperture 3 is that often when I am trying to import images to a project, the images "do not show up" in the import window. In other words, Aperture doesn't "see" the images I am trying to import.
Here's what I mean, I might have photos on a CF card or on a hard drive which I would be trying to add/import into a project. Sometimes but not all the time, when I select the folder or location where the files are that I am trying to import, no files show up! These are just regular JPEG files. I know they are there because if I look with OS X's Finder, the images are all there. As well, sometimes if I quit Aperture and restart it all over again, the images that I want to import now show up in the import window.
This problem doesn't change either whether I click on the "do not import duplicate" box or not. Although as a side note, this "do not import duplicate" function doesn't seem to be reliable either.
Does anyone have any suggestions regarding what I can do to fix this? Can I "reinstall" Aperture? How do I do this? Is this something I can fix by rebuilding the library?

I didn't even realize that I too had this issue until I came upon this thread. I went into my Import window, selected my hard drive and only the folder structure would show - no images corresponding to those within the folders would appear in the window above.
Odd, though, all I did was uncheck the 'Do not import duplicates' box and suddenly the images now appear, and continue to appear after a relaunch of Aperture. I've since rechecked the duplicates box but the images still appear.
I don't know if it's related to the initial toggling of the duplicates button or not. Nor do I know if the problem will appear sometime later, but I do know it was/is an issue.

Similar Messages

  • Problems with importing images into Lightroom cc

    Problems with importing images into Lightroom cc
    I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
    Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
    Now I have left lightroom 5 and where the input port works fine.
    What happened to the upgrade from Lightroom 5 to lightroom cc?
    The camera has the latest software.

    I've now tested in various ways.
    First, I have images on both memory cards in the camera.
    Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
    Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
    I turn the camera off after a while and get the next meddelnade (picture 1)
    Which can be translated:
    "The following files were not imported because they could not read (351)
    Property 1-100
    etc. "
    Picture 1.
    Picture 2

  • Problem with importing images into time lapse

    Hi
    I am having problems with importing still images into a time lapse sequence in photoshop and would appreciate any suggestions!
    I want to create a time lapse using a sequence of still photographs.  All file names are sequentially name/numbered. 
    I am using the Motion workspace, and have followed all of the instructions available. 
    Create correct sized new document (film & video).
    Create video timeline.
    Set frame rate.
    Choose 'create new video layer from file'.
    Point to first image in the folder where the images are stored.
    At this point, no matter what I have tried, I receive this error:
    I have tried different sized new documents; tried jpegs and tiffs; tried different frame rates, tried different qualities and sizes of images; tried selecting the last image instead of the first (one recommendation).
    If I use the 'Place' command from the file menu (and check the 'image sequence' box) instead of selecting 'Create new video layer' from the layers panel, it loads fine and I can still render the video.
    It took me most of a day to discover this workaround, but every other reasonable 'how-to' that I can find says that I should be able to do it by opening files into a new video layer and it seems as though the new video layer option may give me more alternatives.
    Anyone have any idea why I could be having these problems?
    I have reset Photoshop, deleted the settings file, even reinstalled it.  I use 64-bit on windows 7 and even installed the 32-bit to try that, but all with the same result.
    Stuart

    Unfortunately, yes--I've tried it that way over and over, and every other way I could think of.  The files are all in one folder, and I've converted the raw files to both tiffs and jpegs.  I even tried converting them to jpegs at the final pixel dimensions.  Each folder that I have used only contains one type of file, and they are all part of the same sequence and sequentially numbered.  I have even tried renumbering the files with numbers first, numbers last, numbers only, moving underscores.  I moved the files from my external hard-drive to the desktop ... I have a lot less hair than I had only a few days ago!
    I've looked at a few other tutorials that outline the same sequence of steps, and tried them over and over, and then changing one step at a time to make sure that it was not a single step that caused the problem.
    The thing that is really bugging me is that it works fine if I use the different approach of using the place command instead. 
    Anyway, thanks for all of your time.  It's going to be a lot simpler to just stick with 'place' command and I will likely do that, but I tend take things like this as a challenge.  I like to know WHY it won't work for me.  Sometimes it seems that there is just no logical explanation!
    Stuart

  • Problem with importing images shifting text

    Hi,
    I custom designed a heading and menu on a blank page, and then I added images for a slide show (hyperlinked each one with next previous). My logo or heading is in the exact same place but when you go from one page to the next it giggles/or looks like it's shifting (this looks horrible when you are going through the images). The images are PNG and not very big in size (approx. 380 pixels by 580 at 72 DPI). The text shifting problem does not happen if the images are shrunk or kept at a really small size. I've tried everything I can think of and it def. has to do with the images being a certain size, but it does not make sense as I should be able to work with images that are this size -- they are not even very big to begin with! Any help would be so greatly appreciated. THanks!
    Best,
    Corinne

    you appear to be a mac genius
    Thanks for the compliment but mostly I just regurgitate what I've learned here. Regarding the image size I don't think you need to do anything. The only set of photos that are jpgs and can be downloaded are those in the Mollen and Drew section. The rest of them are java based and cannot be downloaded, only obtained via a screen capture. I don't know what you did differently for Mollen and Drew's page but it is different from all the others in that first gallery. However, the other pages can take the view to the overall gallery were the links to Blank # are visible. The few pages I visited of those, Blank 34 and 41 had jpgs for the large view that could be downloaded. Is that what you want? If so you might consider putting a watermark on the photos. This example was done with Photoshop but there are 3rd party applications that can automate the process, putting any text or icon on the photo in the location of your choice. iWatermark is just one of several. You can find them at VersonTracker.com.
    The current iWeb converts the photos to 800 x 600 and uses java for the slideshow and gallery. This makes it more difficult to download a photo. A viewer would have to make a screenshot of it in order to get a copy.
    Of the five one your gallery page only Mollen and Drew are of the type of page that has jpgs as the larger image. How was that page created as opposed to the one for Georgeen and Tobias. They are two different types of photo/slideshow pages.
    OT

  • Problem with importing images from Nikon S60

    I have been using photoshop elements for several years - currently on Version 8.  I've had no issues importing images from my Nikon D70 - I choose the option to store the images in folders by "shot date" and this has always worked.
    My wife has started using a Nikon S60 to take photos - when trying to import these photos they all end up in a folder with today's date.  I've treid a couple of times to be sure that I didn't make a mistake in setting the import options.  I've checked the "properties" of the images and the date their shows the shot date...
    any ideas?

    Seems unusual behavior. I guess the obvious thing to do is to simply rename the folder although that’s a bit annoying.
    Have you tried selecting one of the other shot date formats from the downloader, perhaps to match the camera date format?
    Click image to enlarge.

  • Having problem with importing images to a java applet in web broswer

    I'm creating a mini 2d game just for fun and I am running it as a applet with the JApplet class.
    This is my html file.
    <html>
    <body>
    <applet code=ambiDexApplet.class name=ambiDexApplett archive=ambiDexApplet.jar
         width=640 height=480>
         <param name="Player" value="Player.class">
         <param name="Actor" value="Actor.class">
         <param name="Tail_Bead" value="Tail_Bead.class">
         <param name="Block" value="Block.class">
         <param name="Morphable" value="Morphable.class">
         <param name="Item" value="Item.class">
         <param name="GameObject" value="GameObject.class">
         <param name="leftImg" value="Player_Left3.gif">
         <param name="rightImg" value="Player_Right3.gif">
         <param name="img1" value="bgImgFinal.jpg">
         <param name="img2" value="Block_Tower2.gif">
    </applet>
    </body>
    </html>However every time i try to run the program i get the following error when i open the java console.
    java.security.AccessControlException: access denied (java.io.FilePermission Images\Player_Left3.gif read)
    at java.security.AccessControlContext.checkPermission(Unknown Source)
    at java.security.AccessController.checkPermission(Unknown Source)
    Obviously, the applet is not letting me read the image files. By the way, the .class files and the image files are all in same directory. So can anyone help me please?

    Unfortunately, yes--I've tried it that way over and over, and every other way I could think of.  The files are all in one folder, and I've converted the raw files to both tiffs and jpegs.  I even tried converting them to jpegs at the final pixel dimensions.  Each folder that I have used only contains one type of file, and they are all part of the same sequence and sequentially numbered.  I have even tried renumbering the files with numbers first, numbers last, numbers only, moving underscores.  I moved the files from my external hard-drive to the desktop ... I have a lot less hair than I had only a few days ago!
    I've looked at a few other tutorials that outline the same sequence of steps, and tried them over and over, and then changing one step at a time to make sure that it was not a single step that caused the problem.
    The thing that is really bugging me is that it works fine if I use the different approach of using the place command instead. 
    Anyway, thanks for all of your time.  It's going to be a lot simpler to just stick with 'place' command and I will likely do that, but I tend take things like this as a challenge.  I like to know WHY it won't work for me.  Sometimes it seems that there is just no logical explanation!
    Stuart

  • Problem with imported images into Indesign

    I have scanned a book as a one bit (B & W) 600 dpi document. I have imported the document into Indesign as i need to integrate some decsreened pics in. I then export the finished document as a press ready PDF and the image virtually disappears off the page and what is left is very distorted. the type is twice as high and about five times wider than the original image.
    I have contacted the scanner company and of course they put the issue with the exporting to the PDF.
    Can anybody help??

    This is bug #2960217 filed by me in September, relating to Indexed over Gray colorspace, also with a Fujitsu Scansnap S1500M.
    I have scanned a book as a one bit (B & W) 600 dpi document. I have imported the document into Indesign as i need to integrate some decsreened pics in. I then export the finished document as a press ready PDF and the image virtually disappears off the page and what is left is very distorted. the type is twice as high and about five times wider than the original image.
    The scanner that i have used is a Fujitsu Scansnap S1500M.
    In short, don't use it in Grayscale (Or BW, I guess) modes. Use it in Color, or make sure to process the iamge in another app (like Photoshop) and save
    it with a normal colorspace.

  • Problem with importing images

    I downloaded the Lightroom 4 trial program.  After watching a tutorial on importing and organizing I imported a few photos
    from the hard drive on my laptop.  All the functions of the program are working but the images of the photos don't show up.
    Do I need to uninstall and reinstall the program? Can I do that and still have the trial time of 30 days? Is there some other
    on/off thing I need to do to make this work?

    It might be that your monitor profile is corrupt, i.e. outdated, or that by some reason no monitor profile is selected.
    Monitors "drift" over time and - after a while - may display colors in a way that is not a true representation of the color numbers.
    If a monitor has drifted way off, Lr refuses to display the images.
    The remedy is to calibrate your monitor using a hardware piece called a spectrometer plus accompanying software.
    In the short run - and only as a temporary remedy - you can set your monitor to sRGB.
    See here for how to do this in Windows: http://forums.adobe.com/message/4977176#4977176
    I don't know how to do it on a Mac - there must be something similar.
    It also can happen that in Windows there is no profile selected at all.
    If you find in your Control Panel that no profile is selected, select one.

  • Problem with importing

    Hi all, I recently downloaded elements 11, and I imported some photos okay, but now it starts to import, gets about half way, and a box saying elements organizer has stopped working. When I went into problem details, it said appcrash. any ideas wot be goin on. (Im importing photos in raw) Regards. Paul.

    Thanks for the reply jon. I was only importing 152 pics. off my nikon camera. I re downloaded elements 7 on to the puter, and they went straight on there with no trouble, so I would of thought they would go straight on to elmnts. 11. ho hum.and strange.
    Date: Fri, 18 Jan 2013 04:58:39 -0700
    From: [email protected]
    To: [email protected]
    Subject: Problem with importing
        Re: Problem with importing
        created by 99jon in Photoshop Elements - View the full discussion
    Hi Paul  What are your system specs. Raw files are usually quite large so the process could be draining your memory (RAM). Are you importing from camera or from your hard drive. In the case of the latter try importing one folder at a time or in smaller batches. You can select files and drag and drop into the organizer. You must drop on the dark gray area between the left and right side panels (if both panel are visible).
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5003831#5003831
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5003831#5003831
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5003831#5003831. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problems with import slides powerpoint

    Hello,
    I have a problem with import slides from the powerpoint, when
    I try to import, the computer blow.
    What I can do?

    there have been lots of issues regarding this, however, I
    have found that if I export my ppt as individual jpeg slides I can
    then use the "insert > Slide > Image Slide" command to bring
    in my ppt slides, I have tried everything else as well but what was
    happening to me was Captivate 3 was losing all of my text and text
    animation. Now my animation is not critical, however, the text is
    very important of course. So now I have stagnat slides, a bit
    boring but at least I was able to finish my project.
    Hope this helps.
    Tony :)

  • Problem with displaying images exported to PS

    This is slightly different than the post about TIFF files not displaying properly.
    In Aperture 1.2, when I exported an image to PS and did extensive work on it, and then saved back to Aperture, it would appear in Aperture just as it looked in PS when I saved it.
    However, in 1.5, that does not happen. After I save the image, and then go back to Aperture, all of the changes I made in PS don't appear! However, if I again open the image in PS a second time, it will change to the PS version even before the image gets to PS (I can see it change right when I click "open with external editor").
    Is this a difference with how 1.2 and 1.5 handle the files? I'm guessing it has something to do with image previews, because I chose not to have Aperture generate previews when I installed 1.5 due to the slow-down issues I saw reported here.
    I'm starting to wonder what the point of upgrading to 1.5 was for me... if I can't take advantage of previews (accessing my Aperture library from other apps like Keynote, etc) and if the PS files I work on don't display properly, I'd rather go back to 1.2. This is a major problem in my workflow, since I often spend a lot of time working on images in PS, and I need to be able to see them that way when I return to Aperture.
    I'm hoping there's some setting somewhere I can use to fix this. Is there?

    David,
    I really appreciate your offer to help. However, I have the problem with all images in my library in all projects, so I'm not sure how useful it would be for you to work with a single image I upload to a server.
    I'm having the same problem on my MacBook too, though for some unknown reason there are certain projects on my MacBook that the process works fine with. I cannot tell any difference between those projects (that work) and those that don't.
    What's even more strange... if I quit Aperture, and re-open it, and then go through the process (open a file in PS2, save, return to Aperture) - it works fine! But ONLY ONE TIME. If I try the same process again, on that same image, or any other image in my library, it will not work. It only works the FIRST TIME I do it after opening Aperture. I tested this several times and got the same result.
    I am completely stumped here. I've tried generating previews for a project and turning all of the preview options on, but that doesn't solve the problem either.
    Anyone out there have a clue what might be happening? This is more than a minor inconvenience... if my image management system can't display the image as it should appear, it's unusable.
    Chris

  • Problems with importing text messages from PC Suit...

    Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
     I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
     Thanks for your help

    Most phones only allows importing of draft and archived box for SMS.
    To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
    If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
    What's the law of the jungle?

  • Tempo problems with imported wav files

    Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
    Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
    So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
    I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
    Thanks for the help! I really appreciate it.

    Hi,
    First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
    Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
    regards, Erik.

  • Problem with Gif image

    Having a problem with gif image not showing up. It will show up in netscape6.2, but not in IE 5.0. Both are using the java 1.4 plugin. They are basic buttons (zoom in, zoom out, etc) and they actions work, just the icons aren't showing. Any help would be great! Below is a snip of code:
    JPanel toolBarsPanel = new JPanel();
    javax.swing.JToolBar toolbar = new javax.swing.JToolBar();
    JButton zoomin = new JButton(new ImageIcon("tut/zoomin.gif"));
    JButton fullext = new JButton(new ImageIcon("tut/fullextent.gif"));
    JButton identify = new JButton(new ImageIcon("tut/identify.gif"));
    JButton btn = new JButton(new ImageIcon("tut/addtheme.gif"));
    toolbar.add(zoomin);
    toolbar.add(fullext);
    toolbar.add(identify);
    toolbar.add(btn);
    add(toolbar, BorderLayout.NORTH);
    Thanks again for any help!

    I used to do a lot of work in this sort of thing. After a while we were able to convince our bosses to use generated HTML (JSPs, etc.), so the problem moved to porting JavaScript to different platforms! (Platforms in this context means the different browser/OS combinations, etc.).
    The only two things I can recommend are:
    - complete control over you code. You will have to fix it! (Tried you apps on a Mac yet?)
    - assume a minimal install. Don't assume users are going to have any fancy tools installed on their PC, unless you are developing an Intranet app, where you know the spec of the machines that are going to be using it.
    As regarding getting IE to use a relative address, I don't think you are going to have any luck their, I'm afraid! (Although I am curious. It has been some time, but I though it did use relative addresses. Are you absolutely sure about this, did you check this out with System.outs and that?
    HTH,
    Manuel Amago.

  • Problem with import file type setting

    Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
    Can't find a way to overcome this. Thanks for any help.

    Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Maybe you are looking for

  • Blank screen with xorg from testing

    I've been trying to get this going for a while now, but  I keep hitting a brick wall.  Maybe someone can see something that I'm missing. The system is a dell inspiron 5100 laptop with an ati radeon m7. When X is started I get a blank screen, no backl

  • Cant use work program on a MAC

    I use a program at work that I cannect to using a link. When I open Firefox and type in the link I get this error Message. This plugin requires Windows NT/9x When I click on install plugin It says that the plugin is unknown. Can I download Windows NT

  • Miro item quantity

    Dear all, In Miro , I use deliver note or po for reference document then I enter the reference document number . the system is called that reference document . but quantity is equal to PO quantity. But I have to see  goods receipt quantity . how can

  • While editing my photos I get black bars covering parts of my photo

    while editing my photos I get black boxes covering parts of my picture. What causes this?

  • Bridging mode: ¿can servers be reachable by their real IP addresses?

    Hello team. Customer is asking me to load balance a farm of servers for clients in the same subnet, so I am going to configure bridge mode. In parallel, customer is asking me to have visibility of the real IP addresses of each of the individual serve