Aperture 3.3 update my Aperture is running so slow and sticky

As per my header..Its driving me crazy.
Anyone else experiencing problems? I am running 10.7.4
Thanks
Tahir

Inadequate RAM may or may not be an issue, but in your case with an early 2006 core duo laptop with 2 GB max RAM it almost assuredly is an issue. Another common cause of slowing operation is hard drives slowing as they fill, so make sure no hard drive is more than ~70% full; even less full is preferable for speed.
You should evaluate whether or not you have adequate RAM:
Look at the Page Outs number under System Memory on the Activity Monitor app before starting a typical Aperture work session and write the number down. Recheck the Page Outs count after working and wirite the number down again. if the page outs change (manual calculation of ending page outs number minus starting page outs number) is not zero your workflow is RAM-starved. Ignore the pie charts and other info in Activity Monitor.
If your test showed that page outs increased during operation you can
• add RAM (IIRC 2 GB is max on that box)
• and/or simply try to run Aperture by itself
• and/or switch from 64-bit operation to 32-bit operation (which will make some additional RAM space available). See Switching Kernels:
[url=http://support.apple.com/kb/HT3773]Mac OS X v10.6: Starting up with the 32-bit or 64-bit kernel[/url]
All that said, the fact is that a 2006 core duo laptop is too weak in CPU, GPU and RAM to properly run Aperture except as a viewing device. Sorry. When you decide to upgrade stick to 2011 and later Macs that will take 16 GB RAM, noting that the newest MBPs have soldered RAM so must be initially purchased with 16 GB of expensive Apple RAM.
HTH
-Allen Wicks

Similar Messages

  • After yosemite update, my wifi periodically runs very slow and sometimes disconnects

    Hi there,
    After the yosemite update my iMac's wifi has been running super slow, nothing to do with my own internet connection as it's fine, as other computers and devices works fine on the internet.
    Recently the only way that I have fixed it is to turn my wifi off, and then turn it back on again, this fixes it for a short amount of time before I need to do it again.
    Any suggestions?
    this was a screenshot during the time that it was running slow, during the test it went down to about 0.02 mbps download, then spiked to 2.5mbps, causing the average of 0.19mbps.
    Upload speed seemed average for my internet connection.

    Please look over and use Troubleshooting Wi-Fi

  • After 6.01 update on Mac, Firefox runs way slow, and is almost unusable

    Running 10.5.8. After FF updated to the latest version, it is unbearably slow. Tried reinstalling, but it didn't help

    After the latest update, Firefox is much better. Using it again.

  • I have mac, desktop v. 3.6.16 will not update to 6. My mac laptop is updated to 6 but runs very slow. How do I get my laptop back to 3.6.16

    Desktop is an imac is 10.6.8 running firefox v 3.6.16 and runs well. My mac laptop also 10.6.8 automatically upgraded to 6.0 and runs very slow, and I do not like the layout of the toolbar. How do I get my laptop back to 3.16.6

    Now it is clear which it wasn't before! We can't see what you have done or not so a good descriptions does help when communicating.
    If you have done all you say and some restarts too I would advise you to do the install of 10.6 from the installation disc. Restart the computer and then install the 10.6.6 Combo update. You just install "on top" of what you have. No archiving or formatting.

  • I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing

    I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing???

    First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    If you still get the errors after that, try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I have a problem to update iMovie 9.0.9. The OS is running really slow and halts from time to time. In the update procedure it says it's one minute left. That was one hour ago... What can I do?

    I have a problem to update iMovie 9.0.9. The OS is running really slow and halts from time to time. In the update procedure it says it's one minute left. That was one hour ago... What can I do?

    I have a problem to update iMovie 9.0.9. The OS is running really slow and halts from time to time. In the update procedure it says it's one minute left. That was one hour ago... What can I do?

  • New mountain lion update causing macbook to run very slow?

    New mountain lion update causing macbook to run very slow?

    Select Apple menu > About This Mac from the menu bar. How much memory is installed?

  • I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectal

    I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectedly. iTunes microsoft word all of them quit unexpectedly. Help!

    Exact same problem with my 2010 MBP 2.4ghz 4gb ram 10.6.8. iTunes said update was needed, Software Update ran with various updates including a security update, truthfully didn't pay much attention, I always install the Apple updates. After the restart it took 3-4 times longer than normal to get to the login screen, same to get to the desktop but I'm familiar with that occurring on update restarts. Unfortunately it got worse from there. Performed a full shutdown and startup. Same long boot.  After the desktop finally loads every mouse button press received a 2 minute beachball. I use menu-meters and both processors are under 10%. Waited a few minutes for disk utilities to launch, repair permissions estimates 3 hours for a typical <10 minute process. Activity monitor shows nothing over 10% CPU most of the time however ReportCrash pops to the top often. Any suggestions would be greatly appreciated. BTW zero problems until this update.

  • My MacBook pro is running very slow and unresponsive.

    My MacBook pro is running very slow and unresponsive. I have mid 2010 model running on lion. Past few days it looks very unresponsive. Tried to reinstall lion as clean copy. Still no luck. Any help on this is much appreciated !
    My model has 4 gb ram.

    Things That Can Keep Your Computer From Slowing Down
    If your computer seems to be running slower here are some things you can do:
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Repair the Hard Drive - Lion
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    Suggestions for OS X Maintenance
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • HT1338 XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding

    XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding. There is no more updates to download.

    munish khanna wrote:
    1. upgrade to lion, which should over write previous software and the reasons for it being slow.
    No, you don't want to upgrade over a buggy system, Lion has issues of it's own that will only complicate matters, plus Lion is slower than Snow Leopard.
    Learn all the pitfalls before you upgrade to Lion, like all your Rosetta/older programs will no longer work and more.
    Leave Lion for a new hardware purchase is my advice, it's still got plenty of security and other issues.
    For your performance, your likely better off replacing the hard drive with a 7,200 RPM model and maxing the RAM, download the free MacTracker to find out your specs, and OtherWorld Computing is good for videos, tools and parts.
    http://eshop.macsales.com/installvideos/
    2. Format the hard disc and reinstall snow leopard.
    That will work, provided your data is off the machine first.
    Now how do i reinstall snow leopard as it was an online purchased upgrade from leopard.
    The 10.6 Snow Leopard disk that you upgraded 10.5 Leopard from actually has the full OS X 10.6 on it.
    All you have to do is stick the disk in and hold the c key down while booting, use Disk Utility to erase the entire drive, quit and install 10.6.
    Of course your not going to get the free iLife that came with the 10.5 grey disks, see if you can first install 10.5 with the same methods, then setup with the same user name as before, then upgrade to 10.6
    I think Apple nulled booting off the 10.5 disks, but it won't hurt to try.
    Another method would be to install 10.6 fresh by itself, then use the program called Pacifist to extract iLife from the 10.5 disks.
    http://www.charlessoft.com/
    Read here for plenty of how to's
    https://discussions.apple.com/message/16276201#16276201

  • Photoshop Elements 12 runs really slow and is almost unusable.

    Photoshop (and Premiere) Elements 12 runs really slow and is almost unusable.
    All other high end software works perfectly including 3D rendering software.
    27" iMac mid 2011.
    16gb of RAM.
    Over 100gb free hdd space.
    Radeon HD card 2GB.
    3.4 GHz Intel Core i7.
    I have tested on tiny low quality images as well.
    I bought this with the bundled Premiere Elements which is also unusable even with the smallest and lowest quality video file.
    iMovie works fine as does other video editing software. I ONLY have an issue with Photoshop and Premiere Elements 12.
    Mavericks 10.9.3
    Elements 12.1

    After the latest update, Firefox is much better. Using it again.

  • All design programs running extremely slow and takes forever to save and sometimes shuts down randomly?

    Ok so  I'm a design student at a community college (about to graduate soon and will be continuing on getting my BFA) I have all of the creative cloud suite. I have Illustrator, Photoshop, Lightroom, InDesign, etc. Recently I started having problems with all of the programs. Whenever I work in the programs they would run extremely slow. Recently, I tried to save a .eps file that was only about 1.2 GB and it took me an hour to save, and this was when I was working off of my computer desktop. When I place the .eps file in Indesign, everything would go blank and it would freeze up. Also I had an error sign popping up from InDesign saying "out of memory". Im not sure if that is related to my computer's hard drive or indesign itself. I just started using creative suite so the creative suite is pretty new to me. Sometimes in Indesign when I do the Command+w to preview the whole project, it would be completely black and showing nothing and I would hit escape and the whole software screws up. Then I would do a force quit on the software and then Indesign would say there was a serious error and must shut down. That error message has been popping up several times now. I also talked to Apple support and they suggested me doing a Repair disk utility (which I am currently doing right now) and also recommended me contacting Adobe since they know their software. I checked software to see if there is any updates that is needed but everything is up to date. I'm not quite sure why its acting like this so I'm reaching out both to Apple and Adobe to see if both can help me solve the problem. If anybody had experienced this problem before and could help me troubleshoot this issue that would be great.

    I installed the creative suite about a year ago, and this just started happening last weekend. I didn't think it would be a problem and that it would last for a day since I was working on InDesign all day and Illustrator and it usually goes away after I finish using the programs. But this has been occurring for about a week now and has not gone away. and yes the other programs are running slow. I was trying to resize some images for a client and Photoshop was acting extremely slow  when I was trying to resize the image and also place an image into a 8x10 document in Photoshop. I'm not sure how to find my system specifications.
    All design programs running extremely slow and takes forever to save and sometimes shuts down randomly? 

  • My mac book pro runs so slow and little round rainbow keep popping up

    My mac book pro runs very slow and little round rainbow keeps popping up

    First, back up all data immediately, as your boot drive might be failing.
    Step 1
    This diagnostic procedure will query the system log for messages that may indicate a hardware fault. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|nspace-h|n Cause: -' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • After update to Lion Numbers became very slow and clumsy.

    After update to Lion, Numbers works very slow and clumsy. Any solution to fix this problem?

    Don't know about being "slow" - I've always felt it was slow.  I could run Office XP (maybe 2000 - not sure) on an 133 mhz Pentium and it was faster than Numbers on my late 2008 Aluminum MB.
    But I've had other issues under Lion with it.  It seems whenever I first go to my spreadsheets after the computer has been asleep - even if it is some time after waking it up - and start to enter some numbers, I'll get a beep and see that what I tried to type didn't come out right and I have to do it again.
    I was wondering if it was something to do with the auto-save versions maybe kicking in when I first start to enter info, but before I finish the first entry.

  • On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    What version of Mac OS X?
    What home page?
    What browser?

Maybe you are looking for