Aperture 3.4.1 and iPhoto 11 (9.4) in Lion 10.7.5?

I have created quite a mess here, and am not sure what to do about it. I was looking for some photos that were in my iPhoto library and I saw a vault with the same name in Aperture, but none of the photos appeared. The previous versions of Aperture would see iPhoto libraries and open them within Aperture, but this wasn't working. I couldn't seem to share the photos between the apps. So I found that Open Library in Aperture, which I did, and now I cannot get the two libraries separated. It will only open in one or the other application. It is really a mess. Now I can only open the photos in one or the other at one time. The previous workflow between the two apps was seamless. This one not at all.
I also see some old imports of libraries (iPhoto Library (1) , and iPhoto Library) in the Aperture app and there are duplicates of photos, library 1 has all the photos of the earlier library plus more current ones. I am wondering if the name iPhoto Library in an aperture project window is part of the confusion.
Anyway, this new workflow is really confusing if this is the way it is supposed to happen. If it isn't, I need a remedy. If it is, I need some tricks and instructions about what the heck is going on. I don't like this system at all. Apple really seems to have missed it with the upgrades to the two apps.
Any help appreciated...
Thanks
Jeff

Aperture 3.4.1 is sandboxed, and apparently it can no longer use external clients and plug-ins that are not sandboxed. Outlook and Entourage need to be updated to comply with MAcOS 10.7.5 and 10.8.x to work with Aperture 3.4.1.
See this lengthy discussion: Re: Aperture email sharing (Outlook) not working since upgrade to mountain lion
And send feedback Apple - Aperture - Feedback to Apple and Microsoft.
Regards
Léonie

Similar Messages

Aperture 3.1.3 and iPhoto sync problems

Upgraded to Aperture 3.1.3. Then upgraded to Lion. Tried to sync my iPhone and it got as far as photo's and got a -50 Sync error. Went to iTunes and turned off photo sync and the phone syn'd perfectly. Went back to iTunes turned photo sync back on, and got an error again. Went to iTunes turned off sync and checked the option to remove my photo's from the phone. Sync worked fine. Turned the photo sync back on, and it errored out when it was trying to reload the pictures. Turned off the Aperture photo sync and changed it to iPhoto. The next sync it reloaded my 1,500 photos without a hitch.
Bottom line: I explained all I have gone through so you can understand that it is not a corrupt photo library on the phone, and iPhoto sync'd fine, so it certainly appears that Aperture is once again the problem.

I am getting the same "Unknown error (-50)" when trying to sync photos from my Aperture 3 library now.
I did not upgrade to Lion (waiting for a 3rd party driver I need to be updated first for it), but I did update iTunes to 10.4 (80) recently and that is when I noticed the issue.
I haven't had this issue before. It syncs everything else but when iTunes goes from "Analyzing Photos" to "Optimizing Photos" in the sync process it reports that it is unable to sync because of an "unknown error (-50)"
To resolve the problem, I tried the following:
I repaired my Aperture library database (using Option+Command when launching Aperture 3).
Deleted the "iPod Photo Cache" folder inside my Aperture library. It had to resync all my photos again, this time it worked, but the next sync it had the same error again.
Updated my iOS to the latest version.
Did a Repair Disk Permissions on my Mac.
I changed USB cables and ports (using only ports directly on my Mac Pro).
Tried syncing with only iTunes running.
Doing all the above made no difference, I am still getting the error message and it won't sync new photos back to my iPhone 4 now.

Aperture 3.4.1 and Iphoto Browser

I have Aperture 3..4.1. I am going through the manual and it says I can import selected photos from my iPhoto library by going to File>Import>Show iPhoto Browser (or press Option I). There is no "Show iPhoto Browser" under File>Import, and selecting Option I does nothing. I do not want to import my entire IPhoto Library into Aperture - only selected photos. Am I missing a setting here somehow? I am up to date on Aperture and iPhoto both.
Thanks....

The iPhoto Library Browser is no longer available, sorry.
Since iPhoto ans Aperture share a unified library format, it is no longer necessary to import iPhoto images to Aperture, to be able to use Aperture's advanced image adjustments on the images. Just open the iPhoto Library in Aperture.
To import only selected images from iPhoto to Aperture,
open your iPhoto Library in Aperture,
create an album with the images that you want to import,
export this albums as an Aperture library,
then import this library into your main Aperture library.
Regards
Léonie

How can I solve a conflict between my newly-downloaded Aperture 3.4.3 and iPhoto 9.3 versions?

I downloaded Aperture 3.4.3 from the Apple App Store today. Now when I attempt to open my iPhoto 9.3 I receive the following error message: "To open your library with this version of iPhoto it first needs to be prepared." Then this second paragraph also appears: "You have opened this photo library with a newer version of iPhoto. Please quit and use the latest version of iPhoto." I'm not able to run an update because the iPhoto application won't open. Also, when I check for software updates I receive a message that my software is up to date. What gives? Have I missed a step in merging my iPhoto and Aperture libraries? I'd like to be able to use iPhoto again, because there are albums there that don't appear in Aperture.

And could you see an iPhoto 9.4.3 update at the AppStore? If iPhoto came preinstalled on you Mac, you may need to accept the iLife apps first at the AppStore. If you never accepted them to your Apple ID they still may be waiting in the "Purchased" tab of the AppStore to be accepted. Once you click "Accept", the AppStore should automatically offer updates for them in the "Updates" section.

How to import Aperture and iPhoto libraries into LR Master database

I have a lot of photos in files and events in iPoto and Aperture. Would like to conso;idate all my photos inLightroom Master Photo file with those files and events as folders.
Could I have instructions on this from someone who has done the same
Many thanks
Ivan Ungar

John,
While I am very new on LR and your referenvesare to older versions of the
softwares
Running LR 5.2, Aperture 3.4.1 and iPhoto 11.
I could not find any reference as to the step by step import/export
procedure with the most important proviso for me.
There is aprox. 24000 photos in Events/Folders and I need to keep these
intact while importing it into LR.
Could you help please
Best rgds
Ivan
Ivan Ungar
Phone: (612) 8354 0618
Mobile: (+61) 417 687 906
E-mail: [email protected]

How to get Aperture and iPhoto to use Pentax *ist DL RAW images natively

Using some techniques that I found in various places in these forums, I am going to give step-by-step instructions to get Aperture and iPhoto to recognize Pentax *ist DL RAW images natively.
Note: This worked for me using 10.4.6 with the latest iPhoto 06 and Aperture updates. I do NOT know if this will work on older versions of OS X, iPhoto, or Aperture.
Note: If you also use a Pentax *ist DS camera, these instructions will probably disable support for that particular device due to the modifications made to a system file. Only complete these instructions if you want to use a *ist DL camera.
** These instructions involve modifying system level files using a HEX editor. If you are not comfortable with this, do NOT attempt to do this or you could kill your system. Remember, BACKUP BACKUP BACKUP. These steps worked great for me but follow at your own risk!! **
Ok, lets begin...
1) Download this great patch by macintosh_tech
http://idisk.mac.com/macintosh_tech-Public
This patch contains an updated raw.plist file which includes the RAW information for the *ist DL. This patch also contains an updated libRaw.dylib file and an updated Raw Presets file for Aperture.
** Do NOT copy the libRaw.dylib file from this patch to the folder listed in the patch Read_Me. This file did not work on my Intel-based Mac and crashed my system!!
I was able to modify my original libRaw.dylib file using a HEX editor to get it to work on my system. Instructions for this modification will follow.
2) Open the .dmg of the patch in a Finder window
3) Open a new finder window and browse to /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ImageIO.fra mework/Resources
*4) Backup the libRaw.dylib and Raw.plist files. Copy them to a safe location. For extra safety, you can just copy the whole Resources folder to a safe location (Make sure that you COPY it and dont MOVE it)*
5) Right-click the libRaw.dylib file and select "Get Info". Look at the bottom of the info window and expand the "Ownership & Permissions" tab. In this section, expand the "Details" tab. If the lock icon is in the locked position, click it to unlock it. Change "Owner" to your user name. If requested, enter your system password at this point. Close the info window. This step lets you modify the libRaw.dylib file.
6) Complete step 5 for the Raw.plist file.
7) Copy the Raw.plist file from the "Place In System Folder" folder from the patch to the Resources folder. It will ask you if you wnt to overwrite the existing file. Click "Replace".
8) Open a new finder window and browse to the /Users/YOURUSERNAME/Library/Application Support/Aperture/ folder.
* 9) Backup the "Raw Decode Presets.plist" file *
10) Copy the "Raw Decode Presets.plist" file from the "Place In Home Directory" folder from the patch to the /Users/YOURUSERNAME/Library/Application Support/Aperture/ folder. Click "replace" if it asks you.
11) Here's the tricky part. Download a HEX editor if you don't have one. I used 0xED. It is free and can be downloaded from
http://www.versiontracker.com/dyn/moreinfo/macosx/29521
12) Open the libRaw.dylib file from the Resources folder in your HEX editor.
Note: This is your original libRaw.dylib file from your /System/Library/...../Resources/ folder, NOT the file from the patch.
Use the Find function and search for the string "Pentax *ist DS". Make sure you are using "Search Type: Text" (or equivilent in your editor) and that you use proper case. When you find this string, change the "S" in the "DS" to an "L". The string should now look like "Pentax *ist DL". Use the "Find Next" function to find the next instance of "Pentax *ist DS". Again, change the "S" to an "L". There should be two total instances that you need to change. Save the file and exit the editor.
13) Open Disk Utility and repair permissions. This will set the raw.plist and libRaw.dylib files back to their original permissions.
14) Reboot the system.
15) You should now be able to view .PEF files natively in Aperture and iPhoto. I appologize in advance for any typos. Let me know how this works, as this is my first tutorial of this nature.
Macbook 2.0 Mac OS X (10.4.6)

It would appear that my last post was a moot point as the 10.4.7 update adds support for the *ist DL. It's nice to have it biult into the operating system now.

Aperture and iPhoto should use the same library

Hi all,
It seems that there is a lot of conversation about moving photos between Aperture and iPhoto. For example, some like iPhotos slideshow better but still require Apertures adjustment options. Still others have tried, to no avail, to use Aperture as iPhoto's external editor.
Personally, I have a large iPhoto library with most photos tagged with keywords. I have just started using Aperture and am yet to decide if its extra features are useful for a novice photographer like myself. Other than the price, I see no reason not to use Aperture instead of iPhoto but I would want to import my entire iPhoto library into Aperture.
My question, however, is why we need to 'import' from one app to the other. Without understanding how the aperture / iphoto databases work, I would assume there is no fundamental reason why Aperture could not simply open an existing iPhoto library and visa versa. They both support RAW, keywords, books etc. And while I am sure there are some deviations in the databases, surely each app could simply ignore the features it does not understand.
Is this something that anyone else has considered or think would be good. I would imagine that the easier it is for customers to upgrade from iPhoto to Aperture the better. Does Apple plan on supporting this in the future or is the import option 'good enough'.
Cheers

Can I and if so how do I best set up Aperture as main app. (master) with iPhoto as sub app that accesses the same library to sort through, look at, order books, etc.
Simply set the Preferences to 'Share Previews with iLife Applications' in Aperture. Then go to iPhoto -> File -> Show Aperture Library. A media browser will open and you can drag the pics from the Browser to the iPhoto Window. Note: You're getting the Aperture Previews not Masters. Note too that if you set iPhoto to Referenced mode (iPhoto -> Preferences -> Advanced) then you won't use double the disk space.
+Remember though, you are not accessing the Aperture Library. If you make changes in the Aperture Library (Re-edit the shots) after bringing pics to iPhoto, those changes are not reflected in iPhoto.+
This is what William means when he says the iPhoto does not access the Aperture Library.
Regards
TD

Run Aperture and iPhoto on an external drive and edit from laptop?

Can I run iphoto and Aperture on an external hard drive, like a file server? Can I store pics on the external hard drive and edit using iphoto or aperture on the external hard drive from a laptop ? How do I make this work?
HELP! I'm maxed out!

Hello Laura,
what is it, that you want to achieve?
Move the Aperture Library to an external drive to free space on your laptop?
or do you want to share your Aperture Libray between your machines and access it in parallel on a network volume?
The option "1" is easy to achieve, the option "2" is not supported by Aperture; Aperture (and iPhoto) are single User programs, see this:
Aperture: Use locally mounted Mac OS X Extended volumes for your Aperture library:http://support.apple.com/kb/TS3252
To move your library (or parts of your library) to an external drive you have two options:
move the complete libary using the finder to a local, external, MacOSX formatted drive,
or turn your library into a "referenced" library: relocate the master image files to the external drive, but keep the Library itself (much smaller now) on your laptop. This way you can browse your images and rate them, use them as screensaver, even if the external drive is not connected.
Regards
Léonie
P.S. the same (*** grano salis) holds for iPhoto; you can move the library, or your libraries, to an external drive using the Finder; you can make the iPhoto Library referenced, but referenced libraries are much better supported in Aperture, for Aperture has been designed in espacially to support huge, distributed libraries - in iPhoto I found it it safer to have several smaller libraries than to have one huge, referenced library - that was one of the reasons I moved from iPhoto to Aperture.

Using Aperture 3 and iPhoto '11 together

I was wondering how to use them together. I spent a lot of time on Aperture 3 for geotagging every photos + faces and, trying to import them back to iPhoto '11, means losing all those info and start back again.
I was wondering if there's a way for keeping the main library on Aperture 3 but being able to work on it through iPhoto '11.

Aperture and iPhoto are entirely different applications that work in very different ways.
The only communication between the two is as follows:
Aperture is able to parse the iPhoto Library to allow it to import the contents while stacking the Originals and Modified versions, preserving metadata and so forth.
Aperture can share its Previews with the iLife apps, including iPhoto.
That's it.
So, specifically, what interaction there is between the two is designed to facilitate migration from iPhoto to the more powerful app. After that, iPhoto has exactly the same relationship to the Aperture Library as, say, Pages or iMovie.
for geotagging every photos + faces and, trying to import them back to iPhoto '11, means losing all those info
use an Export preset in Aperture that includes location information. There is no way to share Faces, but you can use it as the basis for keywording.
Regards
TD

Using Aperture and IPhoto together for RAW

Hi All,
I have just received my MBP and will be using Aperture to edit my RAW files from a Nikon camera.
I was wondering if Aperture works the same as IPhoto in regards to the library function or do you still use IPhoto to arrange, tag your images etc...
If that is the case how do you do that if you are using RAW files? Does IPhoto recognise RAW images?
I would like to hear your workflow on a MAC.
Cheers.

Sad to say Richard but you are close but not quite correct. Aperture has a much reduced set of RAW support vs. iPhoto. Of this I can personally attest, but they're both covered on the Apple site.
To add to some other points you address...
iPhoto is still needed for simple integration with other iLife apps., as Aperture has no iLife integration. There is an Aperture2iLife script available (Lightbox software) which automates an export and import process. If you carry an iPod around with photos, then you'll need to maintain iPhoto for that purpose. Welcome to the land of duplicates!
iPhoto does indeed process the RAW and all image work is performed on a JPEG version therafter. The RAW is never used, but is stored in the Originals folder (along with any original JPG or TIF files from the camera if these were shot vs. RAW).
Aperture's RAW converter is markedly superior to iPhoto, and the control and editing options likewise. As noted, Aperture does not change the original RAW (or other imported file), but saves the edit instructions (akin to adjustment layers in Photoshop) for rebuilding the image viewed from the original. Enhanced book and Web Gallery options exist vs. iPhoto ... so integration to iWeb isn't quite as important, though would be very useful.

How do I transfer photos from aperture and iPhoto to bridge?

How do I transfer photos from Aperture and iPhoto to Adobe Bridge. I am using Photoshop CS6. Many of my original photos were stored as raw files.

Here's how to access Mac iPhoto images for use in Photoshop
and so that they may be viewed by choosing that folder in Bridge..
1. In the Finder, navigate to Users > [user name} > Pictures > iPhoto Library.
2. Control-click (Right-click) the iPhoto Library file and choose Show Package Contents.
3. A Finder window opens that shows the contents. The Masters folder (or called Originals folder) contains all of the photographs that are in iPhoto.
Photoshop cannot access this folder, but if you make a duplicate of the folder, the dupe will be accessible -- so:
4. Control-click (Right-click) the folder named Masters (or Originals) and choose Duplicate.
5, Drag the duplicate folder which is named "Masters copy" or “Originals copy” from the iPhoto Library Finder window to the Desktop.
6. Open images in Photoshop from file on desktop or view them in Bridge.
7 Rename the folder and move it elsewhere (probably to the Pictures folder), if desired.
And here is a Forum thread related to Aperture-to-Bridge
How do I transfer Apple Aperture library to Bridge?

Why are Panasonic GX7 RAW photos not visible in Aperture but in OS X Mavericks and iPhoto?

My Panasonic GX7 RAW photos seem to be visible in OS X Mavericks and iPhoto, but bizarrely not in Aperture (3.5.1).
Does anyone know why this would be? Any solution greatly appreciated.
I've been unable to mange a significant number of images for almost 7 months now due to Aperture's lack of GX7 RAW support and am seriously considering migrating to Lightroom 5. Aperture has been my workflow application of choice for the last 7 or 8 years, but I feel the current situation has become unacceptable and deeply disappointing .

That camera was supported in digital camera Raw 5.0.1 and Aperture 3.4.5 or later. As you say the files are supported in iPhoto it seems you have the right Raw file.
Have you tried it with new imports in Aperture does it still fail? What if you reprocess the Raw files in Aperture, any change?

Sharing Photo's between Aperture and iPhoto and syncing to iPads, etc

Here is my problem.
I have 5 Macs (1 iMac, 4 laptops.) There are 4 people in my family and we have the family pack of iLife. The iMac is where everything sits with a time capsule and Drobo hanging off of it - about 6 TB's of data. Each Mac sync's with a variety of iPods, iTouchs and iPads. All linked to a user. So for example, all my oldest son's devices sync with only his laptop.
Well, I finally fixed my media (songs, movies, TV shows, etc) problem by leveraging home share in iTunes and authorizing all my Macs. But not so lucky yet for Photo's.
Here is the my photo dilemma.
I like Aperture for the editing and ability to handle large libraries better. So I have Aperture installed on the iMac where everything sits. iPhoto is also installed on the iMac and iPhoto is on all 4 other laptops. Prior to moving to Aperture, sharing photo's between computers was relatively easy using sharing in iPhoto - although it appears sharing in iPhoto is different than home share in iTunes. I converted my iPhoto library on the iMac to Aperture - now sharing is a pain in the neck.
Ideally, a Home Share like feature would be built into Aperture and iPhoto with another feature that would allow you to "check for new photos" on the laptops and pull them into Aperture - but wishful thinking right now.
So my while my 2 new iPads are awesome - they are basically useless for Photo's as they are synced to 2 laptops that use iPhoto, but all my Photos are in Aperture on the iMac.
Thoughts anyone????
Thanks

What was the question?
Regards
TD

Another Aperture and iPhoto problem i am having

I today imported 5 photos into aperture, i done keywords and other metadata pictures are all jpeg large 12 MP images. I then go-to the new iphoto 09 and again select show Aperture library find the pictures and drag them into a album on iphoto for easy uploading to facebook etc 3 of the pictures in iphoto when clicked are good clear images the other two when clicked are poor quality scaled down images why?. I thought the masters were left within aperture, and iphoto just loads them from AP. Can somebody explain ?

For most folks using the Previews is pefectly good. And bearing in mind what Facebook will do to the shots there’s no doubt that the Previews will be perfectly adequate.
You can set the quality of the Previews in the Aperture Preferences -> Preview Pane.
If you want to use full size pics then you’ll need to export from Aperture and then import to iPhoto. However, if Facebook is the destination then that’s utterly pointless. From what I’ve seen no matter what you upload they compress the cr*p out of it, strip the metadata and colour management.
Regards
TD

Aperture 3.6 and iPhoto 9.6 crashes with nikon .nef files (raw format)

I've got a problem with raw files support for my Nikon D700 camera. Even though this camera is listed here: https://www.apple.com/pl/aperture/specs/raw.html both Aperture and iPhoto see .nef files as a white image. If I try to edit one, both apps crash.
How can I get a raw files support in these applications?
I have updated os, apps and even tried to remove and reinstall raw camera bundle as it was described here RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10). No luck.
My OSX is installed on SSD, while iPhoto library is on the secondary HDD drive.

Norbert, I cannot find the post you are referring to.
Have you had the problem with Aperture 3.6? This is surprising, since the Aperture 3.6 released is supposed to fix this bug, see the release Notes: Aperture 3.6 Release notes
Aperture 3.6 Update
Adds compatibility with OS X Yosemite.
Fixes an issue that could cause Aperture performance to slow down while browsing through images with onscreen proofing enabled.
Fixes an issue where Aperture could become unresponsive in rare cases when adding to a shared photo stream.
Fixes an issue that could cause Aperture to unexpectedly quit when using the Write IPTC Metadata to Originals feature.
Aperture no longer displays the alert, “This library has been opened with a newer version of Aperture.” when using Library First Aid with libraries previously opened in iPhoto.
Do you remember, which of the presets in Library/Application Support actually is causing the problem, since deleting all of them is causing a lot of work to restore the custom settings? It would be great to know the specific file.

Aperture 3.4.1 and iPhoto 11 (9.4) in Lion 10.7.5?

Similar Messages

Maybe you are looking for