Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!
Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!
4) When my computer crashes, once it starts again, it says "repairing" ... but I am not familiar with reparing permissions -- can you explain how I might do that?
If you are running OS X Lion, then you can restart your computer and then press and hold the 'Option' key immediately after you hear the start up 'gong' (usually heard when grey screen shows as it restarts).
You should see at least two Disks to choose from. Choose 'Recovery Disk' and wait for it to load, then choose 'Disk Utility' option in the Utilities dialog.
Once Disk Utility loads, do the following:
1 - In the left hand pane, choose your system partition (usually called either 'Macintosh HD' or 'Macintosh SSD'). Note - don't choose the actual hard drive listed above the partition when using Disk Utility in OS X Lion as this doesn't offer options for repairing due to it including the Recovery Disk you have loaded in memory.
2 - Click the 'First Aid' tab
3 - Click the 'Repair Disk Permissions' button in lower portion of main pane and allow to complete. Ideally, you will get a final message in main pane saying Disk Permissions are repaired.
4 - At lower right of same pane, click the 'Repair Disk' button and allow to complete. Ideally, you will get a final message indicating that Disk Repair is completed and all appears to be good.
5 - Quit Disk Utility > Close Utilities dialog window > Click 'Restart' button (confirm as needed).
You should boot straight into the system partition when complete.
Note - any red text in the main pane text while running the repairs will be issues and you will need to follow the advice given or post back.
If you are running Snow Leopard; then (as David mentions) boot from your first OS X reinstall disc and run the Disk Utility the same way; except you select the actual hard drive listed at top of left pane (not the partition below it). This is because Snow Leopard does not use a 'Recovery Disk' partition and repairs can be run on the HD or SSD itself.
Hope that helps.
Similar Messages
-
I was updating from 6 to 6.1.2 and my phone went into recovery mode. I usually get a 3014 error but sometimes it gets past the USB screen and goes about halfway through the apple screen and gets a -1 error. I don't have firewalls, no antivirus, the only thing I have is a mandatory college internet connection program that I don't think I can get rid of. What should I do
Also, I already tried to "Hold both home and power button, let go of the home button at the apple screen" but it didn't work.That is usually a result of an iPhone that at one time has been hacked, jailbroken, or rolled back. Try it on a different computer.
-
My Lr 5.3 keep crashing the win7 computer. I have used Lr since ver1. Schully.
my Lr 5.3 keep crashing the win7 computer. I have used Lr since ver1. Schully.
You have not provided this info, but my guess (thinking out of the box)
a. You are low on free disk space on your main Hard Drive. You should seek to have at least 20% of the full capacity of the drive free at all times, the more free space the better. e.g If your main HDD is 500GB you should have 100GB or more free.
Why I think this is the problem? Your system specs just about meets the minimum requirements of Lightroom Version 5. You are using a 32 bit OS so in effect you are limited to 3GB of ram, version 5 would perform better on 64Bit system. Having plenty of Hard Drive space will assist the limited memory.
b. The drive may be failing and you should make sure you have secure backups of your files (Catalog File & Original Image files.)
c. Faulty or failing ram module. -
Encore keeps crashing on startup on macbook pro. I have all the latest cc and osx updates
encore keeps crashing on startup on macbook pro. I have all the latest cc and osx updates
What specific OS and Encore versions? Since you say "latest OS updates," I assume Mavericks, and is this the relatively new 10.9.1 version?
Where in the startup does it crash? Is there an error message?
Mavericks causes a variety of issues, and we don't have enough data to really pin them down. At least with the original Mavericks, some users appeared to get CS6 to run with some serious but workable problems.
Make sure you have handled any permissions issues.
This describes such issues:
Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x
http://kb2.adobe.com/cps/824/cpsid_82414.html -
my itunes keeps crashing every time i open it with my windows 7. im active military and dont have time to be messing with this. please help
Hello there, Staver13.
The following Knowledge Base article provides some assistance in troubleshooting your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Particularly:
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Suddenly, time machine is very slow. Used to take up a minute and now more than half an hour. Does anybody know how this can happen? Indexing the back-up disk is off, but Timde Machine keeps on indexing!
same issue here...
-
My iPad 1 apps keeps crashing. I have closed all running background apps,reset by holding power and home buttons but nothing works. Please help its starting to get very frustrating and annoying.
What exactly do you mean by "crashing" and is it occuring on a specific app or under specific circumstances?
-
There is no consistency when one gets the Mozilla Firefox Start page.There is a line as follows :
Web Images Maps News Shopping Books more
To get Gmail one has to click on "more" which gets one a dropdown menu which ends in "even more" Clicking on this takes one to a page headed "Even More Google Products", including (Hurrah!) M Gmail.
Click on this and one gets the page where one signs in, even though I have ticked the box entitled " Stay signed in" and at last ones's e-mail page turns up. Very occasionally, instead of Books or Shopping on the Start Page "Gmail" is there which when clicked on takes one directly to one's e-mail.It seems a hell of a rigmarole just to get one's e-mail!You can set Firefox home page to one of your choosing, see [[how to set the home page]].
If the keep me signed in option is not working, you may have a malformed cookie. Try deleting Google/Gmail cookies, for details on how to do that see [[deleting cookies]]. -
I am trying to use an iTunes card and I keep getting an error and the numbers 5301. Any idea what can be wrong?
AIrPlay to Apple TV before you attempt Mirroring
AirPlay Mirroring
http://support.apple.com/kb/HT5209
Trouble shooting AirPlay
http://support.apple.com/kb/TS4215 -
My mac doesnt start. All i get is the gray screen with the apple and the loading icon but nothing more happens. I tried to start it in safe mode but it doesnt help. What can i do?
If you have a external USB enclosure - trying installing your hard drive in that enclosure and connect it to your usb port - restart your macbook while holding down the options key. If you Macbook boots to your desktop then you have a faulty cable. If you get the same error, then your hard drive just died on you.
good luck. -
I put a windows xp cd in my macbook pro and rebooted the mac,mac doesn't come up any more and the cd doesn't come out,what can I do now?
Hossein,
As Guido said, you can use BootCamp to partition the drive. If you want to install, or reinstall Windows. You would launch BootCamp and it will actually guide you through the installation, you will only need to decide how large a partition you want. I would use BootCamp, I would not use disk utility. When you have installed Windows and you want to boot into windows, when you start your MBP hold down the option key, this will give you trha option of booting Mac OSX or Windows.
Joseph -
Photoshop CS6 crashes when using burn tool, crop tool, and dodge tool?
Just recently upgraded from Photoshop CS5.5 64bit to Photoshop CS6 64 bit. Crashes when using burn tool, crop tool, or dodge tool? Thanks for your help!
Turn off OpenGL in the prefs and update your graphics driver before re-enabling it.
Mylenium -
I have a file that is something I recorded on my camcorder. I am trying to open it and it keeps saying that a required codec isn't available. This is the name of the file. M2U00001.MPG. What can i do to get it to play.
The info in this thread should help you - https://discussions.apple.com/thread/3648239?start=0&tstart=0
-
I have tried to download a digital copy that came with a movie I purchased and I keep getting the an error about HD purchase vs. SD purchase. I push redeem again and it has the same message and I cant download the movie. What can I do?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
i am having trouble opening iphoto as it keeps showing the loading sign. I am using os x 10.6.8 and my iphoto version is 9.2.3. Please help
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD
Maybe you are looking for
-
Unable to load Knowledge Article automaticaly
Hello, We need to load several thousand Knowledge Articles in the system for the beginning of the project. It is impossible to use LSMW in a WebUI transaction so I tried to use LSMW with the old transaction u201CCMRD_ORDERu201D but there where major
-
Hi all, Is there a way to make the end caps of an imported dashed line (say from Illustrator or Canvas) straight? They seem to always come out round. I have tried making them straight lines instead of dashed both before and after importing them to Fl
-
Why don't I have icloud on my macbook pro running mac os x 10.6.8?
I have mobile me but not icloud on my computer, why and how can i get i cloud?
-
Infoprovider check in authorization
hi guys, i am creating an auth object for hierarchy authorization however when i try to check it on the infoprovider i dont see the auth object (i did create a definition for the hierarchy and all) help me out, its urgernt thanks
-
How to get shared calendars using EWS
Hi, I want to monitor all calendars shared to a user via EWS. I know how to do this provided I know each of the user names. But I don't. So I need to get a list of all the users that have shared their calendar to one specific user. But how? I've sear