Aperture 3 not well!
Put all versions in Trash and tried to reinstall trial version and this keeps apppearing - WARNING The library in "/Volumes/My Book 2 for Mac/APERTURE/Aperture Library.aplibrary" cannot be loaded because it is from a newer version of Aperture.
Any ideas please
You cannot use the trial installer, if you bought Aperture from the App Store. Then you need reinstall from the AppStore. If Aperture has vanished from the "Purchased" section, you may have hidden it. Then unhide it. See
Mac App Store: Hiding and unhiding purchases
or
How to Hide and Show Purchases in the Mac App Store | Macinstruct
Hopefully you can show your Aperture again in the purchases tab.
Regards
Léonie
Similar Messages
-
Image cannot be rendered because Aperture does not support image format
Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One -
Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4
Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
To remove the image capture preferences:
If Aperture is running, quit Aperture, and log off and on again.
Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/ then hit return.
In the window that opens remove "com.apple.ImageCapture.plist"
and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture something .plist remove them too.
then try again.
And if that still does not help, remove the Aperture preferences as well:
~/Library/Preferences/aperture.plist
Regards
Léonie
P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
You can reveal it also from the Finder's "Go" menu:
Finder > Go, then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences". -
IDVD 09 and Aperture 3 not open
When I try to open idvd or Aperture 3 with X 10.6
I get the error message: iDVD cannot be opened because of a problem, check with the developer to make sure IDVD works with this version of Mac OS X. Be sure to install any available updates to the application and Mac OS X. It is a brand new computer,, I just got it, I would think that the applications would work. I get the same message with iMovie. I also used the software disc to reinstall and that did not work either. I went to the library preference, nothing mentioned about these applications. I dont want to reinstall the operating system.
Any suggestions appreciateThere are actually a couple reasons to have both. If you have a multiuser system - either with one computer or a home network - sharing an iPhoto library is very easy to set up and nearly bug free, whereas sharing an Aperture library is quite risky. If you have created any books, calendars or cards in iPhoto, those do not get imported or converted when you migrate your photos to Aperture. So you should not delete photos in those creations unless you want to delete the creations. In addition the latest version of Aperture does not create these things so you may want to keep the iPhoto program around with an empty library as you can access your Aperture library in iPhoto via the iLife browser. Personally, I use both. I take all of my top photos every month and export a folder of fairly large JPGs which I then import into iPhoto. Then every one in the family can use the iPhoto tools for making desktops, screen savers and whatever else they want. The originals are well protected from all the other users.
-
Aperture does not import Aperture library
I am trying to import several Aperture Libraries created in Aperture on one computer (MacBook Pro) into an existing "Main" Library on a second computer (iMac). After being created on the MacBook Pro, the Libraries are Finder-copied to the iMac's desktop.
When I choose File->Import->Library ... then select a Library on my desktop to import into the opened Aperture Library, a progress window opens and it looks like all is well. Unfortunatly, it is not well as when the import is done, the pictures do not show up anywhere.
I have tried to use the menu method (above) and I have tried to drag Libraries to the "Projects" area in the side-bar hoping a new Project would be created with the imported Library pictures in it. Either way there is a progress window that opens and it looks like the library has been imported. If I have the Projects Viewer opened, it even looks like something happens as the thumbnails jump somewhat. Here again, no pictures are imported or no new Projet created with the library pictures in it.
When I check the total number of pictures in the main Library, the number has not changed from before the import. No new Projects are created, either.
I know there may be an issue with duplicates, but I have purposely imported a Library that I know are not duplicates and these are not imported either.
Thanks for any help here.
Aperture 3.5.1When I choose File->Import->Library ... then select a Library on my desktop to import into the opened Aperture Library, a progress window opens and it looks like all is well. Unfortunatly, it is not well as when the import is done, the pictures do not show up anywhere.
In some situations the import of libraries will not work, for example, if the library to be imported is an older version of the same library you are attempting to import it to. In that case it often will help, to create a new library from the library to be imported (to fool Aperture), by creating a new, empty library and importing the second library into the new library.
Now try again to import the new, converted library into your main library.
Also it will help, to repair all libraries before trying to merge them. (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
Regards
Léonie -
After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6.7. and now appears to be missing from the computer and my administrator status has changed to standard. Update Software says I need to do update to 10.6.7 which I can't do because administrator privileges are gone. I didn't back-up with Time Machine ,BAD, but I have all files backed-up on another hard drive. Should I just reformat and start over? Any ideas or help would be appreciated.
PROBLEM SOLVED! For me at least!
Apple Support gave me the clue - I had run Migration Assistant, and it had obligingly replaced a system file (/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager) with the equivalent from my old system.
I reinstalled 10.6.7 using the DVD supplied and all is well.
The moral is - don't use Migration Assistant.
Along the way Apple Support provided me with a link to download Combo update 10.6.7: this could not be installed on my iMac.
Hope this helps. -
Aperture does not recognise TIF files from Nikon CoolScan
The TIF files from my Coolscan are good in every other application, but Aperture does not recognise them. I've tried re-saving the TIFs as JPG and PDS but Aperture doesn't recognise any file generated from the TIF. Maybe it's something to do with the scanner driver? Any ideas how to load these files into Aperture?
You might check the color space that is assigned to the files. If you are using Nikon Scan software to manage your CoolScan, there is a preference for setting the color space of the saved file. FWIW, Nikon CoolScan .nef files are a 'raw' file, not camera raw, that was/is a Nikon proprietary format for their scans. If you use the Nikon Scan for image editing, the edits are non-destructive in saved files and can be adjusted by re-opening the file in NS. Adobe first made editing camera raw available in early 2003 and the Nikon format preceded that. Nikon's camera raw format also has the .nef extension, but is not the same as the CoolScan .nef-- really confusing. I suggested checking the color space, because Nikon has different internal names for Adobe RGB(1988) as well as their own Wide Gamut space.
All said, I've not had a problem opening .tif scan files in Aperture. -
Aperture will not start anymore
I bought and installed Aperture 3 over the App Store.
Initial install and running the program was no problem.
Upon launch now, the application will not start, reporting that "Aperture cannot be opened due to a problem".
The message also says I may need to re-install the software. Well how?
I think this started to happen after I got my iPad2 and selected to sync photos from Aperture, but I am not sure about that.
Even a reboot and with no other started applications, Aperture will not open.
I am running a Mac Mini Server (I bought it new in december 2010 in the Apple Store), running OS X server 10.6.7
Regards, HenrikProblem I'm Getting is:
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
Reason: no suitable image found. Did find:
/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
No expert but from what I can tell theres some sort of bug or something in the PluginManager File as all the files appear to be there. Possible?
Cheers. -
since installing the latest update, Firefox first operated with some errors but now will not load at all; it gives me the following error --
XML Parsing Error: not well formed
locations chrome://browser/content/browser.xml
Line Number 1191, column 20:
utton id="back-forward-dropmarker" type="menu" chromedir="&locale.dir;"-------------------
please note that the words "utton ID" are exactly as the error message gives it; and at the end of the message there are exactly 19 hyphens.
I don't know why this faulty code is referencing things to do with "chrome"... the Chrome browser is not installed on this PC or anywhere on our network.
Also, this is not the first problem I had after clicking Firefox's prompt for the latest update. Before Firefox retreated into this error message, it was loading but running with some faults...
1. the bookmark symbol was not appearing on the right hand side of the URL line, so I had always to click on "bookmark this page", after which the bookmark symbol did appear; however I don't know if the bookmarking function worked properly.
2. the back and forward buttons were not highlighted, as if I had not come from a previous page; so once I clicked on a link to a new page I could not go back to where I came from because Fiefox thought I hadn't come from anywhere.
3. there may have been other errors, but I did not find them.
How do I reinstate my Firefox program to work properly please? do I have to download the latest version and reinstal? if so, do I have to remove the old version first? or is there a fix?
Even to write this message I have been forced to use (yuk -- I don't like to say this!!!) Internet Explorer. So please -- I need help urgently.
Thanks,
NOELSome how I solved my problem by opening a user account and downloading Firefox 4.0 beta and installing it, I did try it, worked fine, so I did close the user account and did go back to my own account(switched user), the main page that I had problem with Firefox which would not open, I dabble click on Firefox it start working again!! I hope that solves your problem too.
firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none -
I have been working through the Training from the Source book
on Flex2 (Trapper, Boles, Talbot, etc.). In Lesson 17, it deals
with accessing server-side objects.
One piece of code accesses a CF template, which brings in an
XML file:
<mx:HTTPService id="prodByCatRPC"
url="
http://localhost/flexGrocer/xml/categorizedProducts.cfm"
result="prodByCategoryHandler(event)"
resultFormat="e4x" />
The CF plate from the book's file has the following:
<cfheader name="Expires" value="#now()#" />
<cfxml variable="xProducts">
<cfinclude template="categorizedProducts.xml">
</cfxml>
<cfset xmlObject=ToString(xProducts)>
<cfcontent type="text/xml" />
<cfoutput>#variables.xmlObject#</cfoutput>
When run the Flex file, I get a run-time message which seems
to indicate that the XML is not well-formed. (Here is a bit of the
message; not sure I'm understanding it!):
[RPC Fault faultString="Error #1088: The markup in the
document following the root element must be well-formed."
faultCode="Client.CouldNotDecode" faultDetail="null"]
I am ASSUMING that the CF page is not returning the xml as
desired, because if I simply change the flex http service call to
the xml file that the CF page is including, the flex app runs as
expected and without errors:
url="
http://localhost/flexGrocer/xml/categorizedProducts.xml"
(something in the posting mech is making the above url
statement messed up, but you can probably tell what I mean)
I am a CF developer and although haven't used the book's
exact method to get the cf generated xml, I have done so
successfully for Spry and other things.
I tried some ot the things I had to do to get the CF
generated xml to work in Spry with this flex, but didn't help.
Tried adding a reset='true" with the cfcontent tag; tried making
the cfcontent wrap the output; added cfprocessing tags to
suppresswhitespace.
Appreciate any thoughts/help on how to solve this. Also,
whether others agree that the problem is with the generated xml
rather than something else.
Thanks
KeithI don't remember the exact context when I first posted this
question and answered it; but, if one doesn't want to change
overall settings for debugging in cf admin., I *think* you can
ajust for a specific area using cfsetting and/or
cfprocessingdirective. There's a number of attributes and
combinations there that I think can take care of the problem. I
forget for sure, but may want to try that, especially on a
development box where you might generally want debugging to be on.
Also, if using cfcs in any part of what you generate, they
can produce whitespace. To solve (or minimize), make sure that
output attribute in the component is false and that output in
function is false (unless directly outputting within the function.
Seems like CF and whitespace is an ongoing item to try to
manage.
Keith -
Aperture help not working - getting JavaScript error message
My Aperture 3 has been having a lot of strange issues lately, most, but not all of which have been cleared up by holding down command + option while starting up and going through all three of the choices there.
One problem that remains is the inability to open the Help files. I keep getting the following message:
“The Help Library requires JavaScript.
If JavaScript is not enabled, you will not
be able to view all the content.”
Help works in all other applications, like Pages and Final Cut Pro. I don’t get JavaScript error messages in any other applications.
I’ve already done an erase and restore from a Time Machine backup, and an archive and install. I reinstalled Aperture, although not by using the Terminal command suggested in the kbase article # HT3805.
If I go the Terminal command route, will I lose all my projects, albums, and editing? What about Mobile Me galleries?
I have a guest user on the computer, and when I log on to that user and open Aperture, the Help Library works fine. So, I know the problem is in my user account somewhere, but I don’t know how to address it. Any ideas?Welcome to the forums.
The fact that you have access to java in another user suggests that it is a local setting or preference.
In the applications folder/utilities there is an application Java Preferences, try resetting this and seeing if it works.
If not, try deleting the java preferences file in your users folder
systemHD/Users/user/Library/Preferences/com.apple.java.JavaPreferences.plist
relaunch the app Java Preferences which creates a new preferences file for you, then try Aperture again.
Let us know how this goes.
Tony -
Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
The statement above is in the pop up error box every time, when I launch Firefox. If I click ok in the box Firefox then opens. How do I fix this initializing/launch problem?Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br /> -
Hi Everyone,
I've been battling with this for a while and I'm getting nowhere. I'm attempting to install DPM 2012R2 onto a fresh VM with a local SQL installation. The setup is as follows:
Server OS: 2008R2 SP1
SQL: 2008 R2 standard with SP3(tried SP2 before this)
Collation: SQL_Latin1_General_CP1_CI_AS
Reporting services installed: Yes(ticked do not configure during the installation)
Enabled reporting servics on port 80 with the default URL
DPM Installation does not throw any errors during the preinstall stage(The server passes all the checks)
Basically, when Installing. I get this error(extract):
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
[10/12/2014 2:35:25 p.m.] * Exception : => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception
---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException:
exception ---> System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: The report definition is not valid or supported by this version of Reporting Services. This could be the result of publishing a report definition of
a later version of Reporting Services, or that the report definition contains XML that is not well-formed or the XML is not valid based on the Report Definition schema. Details: Root element is missing.
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Reporting.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.DeployReports(Boolean isRemoteReporting, Boolean isUpgrade)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: ReportDeploymentFailed; 0; None
[10/12/2014 2:35:25 p.m.] *** Error : Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
[10/12/2014 2:35:25 p.m.] Information : Data Protection Manager installation has failed. All the items that were copied during the installation process have been removed.
For details, click the Error tab.
Any ideas?
I've managed to get it to this stage. Originally I didn't have encryption keys or a listening port(which I fixed).Can you try following steps:
If there are SSL certificates on your computer, by default SQL 2008
installation configures HTTPS for reporting websites. When DPM tries to
deploy reports on these websites it may fail if the reporting websites
are not accessible (might be due to invalid/expired certificates). To
workaround this, provided you do not require HTTPS for reporting websites do
the following:
1. Edit C:\Program Files\Microsoft DPM\SQL\MSRS10.MSDPMV3BETA1EVAL\Reporting
Services\ReportServer\rsreportserver.config
2. Set the SecureConnectionLevel to 0 if the current value is 2 (A value to
2 means secure connection is required)
3. Connect to SQL reporting service configuration manager and connect to the
instance MSDPMV3BETA1EVAL
4. Click on Web Service URL, click advanced and remove SSL identities
5. Repeat the above for Report Manager URL
6. Make sure report manager URL and web service URL are accessible with out
any errors.
6. Restart report server
If that doesn't solve the problem, please try following steps:
1. Open Start-> All programs->SQL server 2008->Configuration Tools->Report
Server Configuration Manager
2. Connect to the instance which the DPM is using to install.
3. Browse Report Manager URL and web service url
4. If report manager URL or web service url throws any error say 500 or 404
fix the error. (Try also replacing machine name with localhost in url)
5. Otherwise delete DPMReports folder (if present) using below instructions
6. Restart reporting services
7. Try DPM setup again.
Deleting DPM reports:
1. Open report manager URL in IE
2. Click show details on right hand side
3. Put a tick against DPMReports folder
4. Click Delete button.
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx -
Whenever access to the Internet is needed, clicking on any icon or link (including the Firefox icon) results in a delay of around 20 secs., followed by the appearance of the error message, headed "Malformed File". The message reads 'Firefox couldn't install this item because "install rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.'
Clicking OK or closing the box leads to a further delay of about 20 secs. after which the required action takes place! Of course, it could be said that it's really only a delay, so I should just get used to it, but it's still a malfunction, it's a pain in the neck or another region, and I really would like to cure it. Any suggestions - please????https://support.mozilla.com/en-US/questions/756907
-
SInce the latest update Firefox has crashed continually for about two weeks now. Continually means at least 10 times a day. Now it does not open at all and I get this message when launching Firefox:
XML Parsing Error: not well-formed Location: chrome://browser/content/browser.xul Line Number 1068, Column 87:SInce the latest update Firefox has crashed continually for about two weeks now. Continually means at least 10 times a day. Now it does not open at all and I get this message when launching Firefox:
XML Parsing Error: not well-formed Location: chrome://browser/content/browser.xul Line Number 1068, Column 87:
Maybe you are looking for
-
It continues to ask me for my password for the old address nd when i enter it or have tried to change it, it does not recognise that address. Do I have to take y phone back to new to be able to log in to the icloud with the changed email address?
-
IFRAME - Not displaying content in IE...
Hello, I have a WD application with IFRAME in a separate popupwindow. It works fine in support pack SAPKB70103, but doesn't work in SAPKB70107(Sps8). It works in Mozilla but not in IE with latest support pack Has any body found this issue. your ans
-
I think i have a defective iPod Touch that i just purchased a few days ago. I've purchased a few apps, and installed several free ones. I notice a folder in my documents where the apps are located. Will i lose all my apps if i take this back and exch
-
Creating appsutil dir failing ebs12.1.1
hi ! I am following doc id 377495.1 to create this appsutil directory in database tier but i am getting unzip error : checking the 11.2.0 path indeed the unzip is version 6.x . but the 11.1.0 path contains the 5.x version. I know as a work around i
-
Import of photos won't complete, just keeps saying please wait for import to complete
I do the usual connections of camera to iMac to download photos to iPhoto. All looks normal until the iPhoto page comes up showing the photos that are being transferred BUT the "import photos" button doesn't work. The letters do not turn black. Li