Aperture 3 screen view. I have the adjustments, etc. on the left side and the picture on the far right side. The middle of screen is black. I need to get the picture back in the center of screen
I have the adjustments, etc. on the left side of the screen. The picture is on the far right side of the screen. The middle of the screen is all black.How do I get the picture back in the middle of the acreen. I believe I must have hit a button that moved the picture to the far right.
On the Mac......
Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the small window that appears
Click the Network tab at the top of the next window
Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
Then.....very important
Power off the Time Capsule and your Arris modem/router for a few minutes
Start up the Arris first, and let it run a few minutes by itself
Start up the Time Capsule next the same way
Your network will now be correct, and your printing capabilities will improve.
If Time Machine backups do not occur now, post back and we will tackle that next.
Similar Messages
-
I use Aperture 3 how can I have the tool bar colored?
I use Aperture 3, how can I have the tool bar colored?
Thanks for your help, for the time beeng i will follow your suggestion: "learn to love the new look."
In any case I strongly recomend Apple to correct the Aperture 3 software.
Have a nice day
Sergio -
I have an iphone 4 which was lost on the bus ride home from an amusement park with my class. The phone does not have find my iphone on it and i cannot track it. Is there anything you guys would say i should do to get this phone back.
Call it and ask whoever answers to give it back to you.
-
I bought an app from the app store, it said there was an error downloading and it did not download but apple still took money off my apple account, how do i get my money back?
From the App Store meny bar click Store > Check for Unfinished Downloads
And check your Applications folder for the app.
Apple's policy > All Sales Are Final > iTUNES STORE - TERMS AND CONDITIONS
Note... it would help to tell us which Mac OS X you have installed when you post for help. -
lost all my notes in my iphone 5s and so i went to my ipad and pulled the notes up and seen them for a Sec then they were gone. Please is there any way to get my notes back?
Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store -
The Folders Panel has disappeared from the left side of my elements 11 Organizer. How do I get it back?
See the icon bar on the bottom: click on the leftmost icon to restore the left panel.
-
Last week ive been robbed at the airport. At night when i wanted to check my pics and my radarstatus my iCloud wasnt attached to my iPhone anymore. Is there any possibility to get my pics back?
please please pleasesure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde -
my computer had a virus and got scrubbed. So now my iTunes songs are on my iPhone4 but I can't get them all back on my iTunes account. Anybody know what I should do? I see 124 songs on my itunes account and 1123 on my iphone. Really would hate to lose them
Here are the options that you have to transfer music. http://support.apple.com/kb/ht4527 I wish you luck!
-
I have given my old iPhone to a mate and now I can see what is going on inICloud on his phone. How do I get round this please?
he should stop using ur apple id.
-
I have three websites as my homepage, but often once I have worked within one tab for awhile and gone to other sites, I need to get back to the site that is there when my homepage tabs first pop up. I may not have even touched the other two tabs, but if I click on the Home button, I get three new tabs with the three websites that make up my homepage. I then have to delete three tabs to keep just what I want. In IE, the Home button has a pulldown, which allows me to select any one of my homepage websites, and loads that site on the current tab. Can this be done with FF?
The only way I know to achieve this would be to create three separate bookmarks on the Bookmarks toolbar and click on a one that you want to load in the current tab. You can also try to right-click the Back arrow and click the entry at the bottom of the list to return to the first page.
-
I know how to physically install it i just need help with the software part. and my current hard drive is backed up on my time machine. The MBP is running mountain lion
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
I have started creating a library in Aperture but can not see how to automatically link changes to keywords, name changes, adjustments, etc to the original image. Is this possible? Tess
The general workflow with Aperture is:
- import files
- make adjustments; add metadata
- make new image-format files that include the adjustments and metadata changes (this is what "Export" does).
You can, as Léonie instructs, write (most) of the metadata changes back to your Originals (these files are otherwise never changed by Aperture). Just be sure that your workflow benefits from it.
More specifically, in Aperture the Original (the file you import) is _always_ linked to the Version (for the time being, think of this as the images you see in Aperture, and keep in mind you can have as many Versions of any Original as you need), and any files you create by exporting blend the Original and the Version and produce an image-format file.
Because the Version and the Original are _always_ linked, there is usually (but not always ) no need to write the metadata held by the Version back over the metadata contained in the Original.
If you are new to Aperture, this very brief guide I wrote may help you avoid some common peregrinations. -
Hello.
My iPod was knocked out of my hand at school and it cracked and chipped really bad. It worked fine, until this moning. The entire left side of my screen does not work at all. I cannot rewind songs, unlock my device, or enter my password.
How am I going to get my serial number now?
It is practically impossible.
And how much would it cost for it to be fixed?
It is a 4th gen black iPod touch.This article can show you how:
http://support.apple.com/kb/ht1459
Also have you ever made a back up to iTunes?
In terms of a replacement the cost can be found at the linke below:
http://www.apple.com/support/ipod/service/faq
Remember to select your country before checking the price. -
i downloaded the icloud and backed up my iphone,but my apps were not working,so i went back to my origanal settings on the phone,how can i get my contacts and pictures back?
You deleted the iCloud account?
If so, connect the iPhone to your computer and sync your Contacts and Photos using iTunes. -
In the new Mavericks OS, when I use Pages, I cannot find a way to get a ruler on the left side of the document. When I click on "Show rulers," all I get is a ruler at the top of the document. How can I get a ruler on the left side?
Wait for an Apple update to Pages which is suppose to put the vertical ruler feature back in.
-
How do I get the menu on the left side of iTunes? I do not know how to get songs on my iPod shuffle.
How do I get the menu on the left side of iTunes or how am a able to get songs onto my new iPod shuffle, I cannot get to my device to add songs to it.
Press ctrl-s.
tt2
Maybe you are looking for
-
IPod shuffle wont play but shows up on PC/iTunes....
Hey Guys, Recently my iPod Shuffle decided to die and stop working. The battery check button doesnt work (no LED lights up) and it simply wont turn on and play any music. The most ironic thing is that, when plugged in my PC, Windows XP recognises it.
-
In Apple Mail where are the message in Trash stored?
Somehow all my Trash message from March 2014 through September 2014 have been removed. In the Trash box I have Trash message going back many years prior to March 2014 and then again starting in late September 2014. Since I do backups with CrashPlan o
-
Not all drivers were updated when upgrading to Bootcamp 2.0
The drivers that I checked are over a year old. I've ran repair a few times but no change. The following features aren't working: Keyboard features like num lock Track pad/button - no right click, no scroll iSight camera - "not programed" Some PCI de
-
Hi, We have Portal on a clustered environment. TREX is up and running fine. When I index any folder, I select Item to Index as ALL and service as TREX SERVICE. When I look up the Indexing monitor, the status is There are too many TREX errors, and onl
-
Is there a way to filter in the Library Module by file type. For example if I just want to view .CRM files.