Aperture conversion from negatives

Does Aperture have the tool to invert a B&W scanned negative
and convert it to a B&W digital photo?
The scan is being done on a 2450 Epson on the with
apple software update for this old Scanner..... scanning is working fine.
SHL

Usually the scanner has a setting to convert negatives. That will give the best results.
Other possibilties are
to use an Automator workflow with Quartz Filters (see my User Tip here: Using Quartz Filters with Aperture)
or use the "Curves" adjustment: set the RGB channel to the mirrored diagonal line. That will map black to white and white to black.
You may also want to look at this thread:
Re: B&W negatives to positive photos
Regards
Léonie

Similar Messages

Getting ÿþ as saved conversations from Lync in Outlook in Office 2013

Hi,
I've been trying to get to the bottom of this and have found similar posts, but no one seems to have an answer.
When I IM someone using Lync 2013, they get a pop up notification but instead of the message they see ÿþ<. Once they open the chat window, they can see my typed text. Occasionally, certain people can't see the first line of my chat, but as
long as they keep the chat window open, they can see everything new I type.
All my conversations that are saved in outlook show ÿþ< for the text and are unreadable. I've disabled the saving of conversations because they have become worthless.
I believe it has to do with BOM but have not been able to find a way to fix this.
If I copy a conversation from the chat window and paste it into Microsoft Word it shows ÿþ<, but if I paste it into notepad the conversation appears.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I've tried changing the preferred encoding for outgoing messages: to Unicode (UTF-8) in Outlook, but this had no effect and I can't find a similar option in Lync 2013.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I enabled logging for Lync and the event IDs that come up are 1, 11 and 12, to which I cannot find any information for at the moment.
Any help and or suggestions would be appreciated.

Hi,
Did the issue happen only for you or for multiple users?
Please try to delete Lync User Profile and information on Registry, then repair Office 2013.
The path of Lync User Profile: %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
The path for information on Registry: HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Then test the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Project Conversion from 11.03 to R12- need help

Hi All,
I need some information regarding conversion from 11.03 to R12 along with Capital Project's conversion, do we need to take care Asset Assignment and Assets information at the time of Project Conversion. Iam doing Project and Task conversion different. Is there any good mapping document or Conversion FD, if any body have please send my mail ID. [email protected]
Thanks for your help.
Thanks,
Srini..

Usually only Open Invoices and Unapplied Receipts are migrated from Old system to New Instance.
Post Migration Reconciliation shall be tough in that scenario. Reconsider/Rediscuss with Client.
Migration can be done using APIs or Custom Scripts using Standard Interfaces.
Hope this is helpful
Regards,
Sridhar

How can I migrate an Aperture library from an external HDD with Mac OS Extended (Journaled, Encrypted) format?

How can I migrate an Aperture library from an external HDD with Mac OS Extended (Journaled, Encrypted) format?
I used to store my pictures on an external hard drive using the latest version of Aperture. Now I tried migrating my Aperture library to Photos. However, after a short moment an error message popped up telling me that "Photos was unable to make a copy of your library before preparing it. Photos does not have the necessary permissions...".
My external HDD doesn't need any permission repairs nor is the system prohibited to read from or write to it.
Thanks for any advice in advance!
Gohtac

My guess is that the encryption is the problem for the new app.

Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view. Also, when I go to enter a new event in google calendar, I now have to click the cursor in the box to type the event (it used to let me just start typing).

Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view (either one or several conversations) as it says "No Conversations Selected" when I have selected one or several. Also, when I go to enter a new event in google calendar, I have to click the cursor in the box to type the event (it used to let me just start typing) or else it flips out and starts jumping to day view or another month. Does anyone know how to fix either of these?

I have had this problem; but while trying to fix another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences

How can I print a text message conversation from my iPhone? Not using screenshots.

How can I print a text message conversation from my iPhone? Not using screenshots. It's around 500 messages so screenshots is not a option.

Yes, you can delete from iphone:
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
It is covered in the manual.
Page 172:
"Delete a podcast: In the Podcasts list in iPod, swipe left or right over the podcast, then
tap Delete. "

Page numbers incorrect after conversion from Excel to pdf

Page numbers incorrect after conversion from Excel to pdf
""This above link (thread:834599) is from a case back in 2011 that claims to solve this problem, but it does not solve this problem. I think that customer only cared about having continuous page numbering, not discrete page numbering per sheet.
========================
I still have this issue in Acrobat XI and MS Office Professional Plus 2010. I keep upgrading to no avail. This regression has resulted in a huge time drain for me. If you fixed it, please explain how I can get my hands on the resolution.
Previous versions of Excel and Adobe Acrobat enabled flexibility around the "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) token, depending on context and usage. The "# of pages" token could represent EITHER the number of pages in the workbook OR the number of pages in the tab/sheet, depending on how you generated the PDF:
You could select "Selected Sheets" and then select all or some of the individual sheets in the workbook, and the PDF would honor the discrete numbering of each of the sheets, so the first page of each sheet was p1 and the "# of pages" was the number of pages in the sheet; not the number of pages in the workbook; or
You could select "Entire Workbook" and the PDF would honor continuous page numbers across all sheets, as a single document.
Now, it only honors the total number of pages in the workbook, regardless of the method you use to publish to PDF: saving as PDF, printing to PDF, using "createPDF" from Acrobat plugin to Excel's menu ribbon; selecting all sheets, some sheets, or Entire Workbook; automatic First page number or "1" under Page Setup > Page> First page number. (This last option, btw, does restart every sheet at p1, but it hardly makes sense if the total number of pages is still the total number in the workbook instead of the number in the sheet.)
I spent a lot of time trying each which way that the blog posts recommended and have tried this on multiple versions of Excel and Acrobat now.
NONE of these time-consuming experiments gave me what I wanted.They all insist that "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) is the total number of pages in the workbook or the total number of pages in the selected sheets combined.
The numbering are correct in Excel Page Layout.
The same issue happens when using LibreOffice calc. (Although, I never tested with Libre Office before, so I don't know that it ever worked).
The workaround now is to create PDF for each spreadsheet one at a time, and then compile them using the Acrobat combine/binder feature. All alternatives are extremely time consuming and tedious. It used to be automatic. This is a major regression that has gone untreated for over a year now, maybe two years.
My task takes infinitely more time to complete than it did with previous versions of Acrobat. That means that days are added to my project, when the functionality used to enable a quick pdf generation that was ready for review, now I have to do this very manual time-consuming set of steps to generate a draft. As the project has grown and more tabs are added, my pdf-generation task takes that much longer. We require lots of drafts. It used to be easy and fast. Now it is hard and time-consuming.
In my opinion, the problem is not Excel; it is Acrobat because it was introduced with an upgrade in Acrobat, not an upgrade in Excel. The problem was introduced in Acrobat 9 or 10. Please provide a patch or add-on or something.

If you are setting up the page numbers in Excel, the resulting PDF would display the the page numbers created in Excel. On Excel 2010 support page, (http://office.microsoft.com/en-us/excel-help/insert-and-remove-page-numbers-on-worksheets- HA010342619.aspx#BM2) is stated the following "tip" which indicates by default Excel 2010 starts numbering each tab with 1. Exel's workaround tip is below -
Set a different number for the starting page
Tip To number all of the worksheet pages in a workbook sequentially, first add page numbers to all worksheets in a workbook, and then use the following procedure to begin the page number for each worksheet with the appropriate number. For example, if your workbook contains two worksheets that with both be printed as two pages, you would use this procedure to begin the page numbering for the second worksheet with the number 3.
On the Page Layout tab, in the Page Setup group, click the Dialog Box Launcher next to Page Setup.
On the Page tab, in the First page number box, type the number that you want to use for the first page.
Tip To use the default numbering system, type Auto in the First page number box.
Also helpful in the same section is the note on viewing page numbers. To see if the page numbering dilemma originates in Excel make sure you are using the Page Layout View see below:
Hide All
If you want numbers shown on pages when you print a worksheet you can insert page numbers in the headers or footers of the worksheet pages. Page numbers that you insert are not displayed on the worksheet in Normal view — they are shown only in Page Layout view and on the printed pages.
Overall it may be easier not to create the page numbers in Excel but instead create then in Acrobat using the Headers and Footers option in Acrobat. I hope this helps - it sounds like a frustrating issue you are experiencing.

I can´t sync iCal events written in the iphone4 to the macbook ical, but conversely from macbook to iphone there´s no problem, can somebody help me?

I can´t sync iCal events written in the iphone4 to the macbook ical, but conversely from macbook to iphone there´s no problem, can somebody help me?

Thanks for your answer! I tried as you say, erase the Sync History, but now does not sync any calendar, only displays the birthday ...do not know whatelse to try.

Conversion from string "20041023 " to type 'Date' is not valid.

Hi ,
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report.
Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ? Can anyone help me with the solution.
Thanks,
Kittu

Hi Jmcmullen,
Found one more issue on the same. I have one value like "00000000" for the column(EmpHiredate)
, when i use above expression values(ex:"20141023")
are displaying in dd/MM/yyyy format in report except value like "00000000" and giving following error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "0000/00/00" to type 'Date' is not valid.
Even i tried to pass its original value("00000000") as below but no luck.
=IIF(Fields!EmpHireDate.Value = "00000000","00000000",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Also tried this:
=IIF(Fields!EmpHireDate.Value = "00000000","2000/10/21",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Please Suggest.
Thanks ,
Kittu

Error while loading : Time conversion from 0CALDAY to 0FISCPER

Hi ,
I get the following error when loading to an ODs .
My 0FISCPER is mapped to one of the date fields from the extractor (Document date) and also Have 0FISCVARNT as part of data fields .
" Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20060405 " .
thanks .

Hello CG
Please refere this forum
Time conversion problem
Thanks
Chandran

ITunes will no longer play nor add to the library any mp3 files which I have created by conversion from a wav file.

I am running iTunes 10 on XP Pro and it will no longer play those mp3 files which I have created by conversion from wav files. I tried to delete some from the library and then re-add them but iTunes will not add them back to the library.
Can anyone help solve this, please?

Back up your purchased music before you upgrade, I've read at least 5 cases where purchased music has just gone.....missing.
That is not supposed to happen, didn't happen to me or thousnds of other iTunes users, but you don't want to be the 6th person, do you?
There are two things to try before you upgrade:
Barbara Hall, "Unknown Error (-208)" #1, 07:42pm Oct 19, 2005 CDT
http://docs.info.apple.com/article.html?artnum=302478

I am changing to a larger hard drive on my Mac. Can I copy the Aperture library from my backup disk running Time Machine without loosing anything?

I am installing a larger harddrive on my Mac. Can I copy the Aperture library from my backup disk running Time Machine without loosing anything? I am getting help migrating everything else on to the new harddrive, but since copying the 350Gb Aperture library takes a lot of time, I am planning to do that part myself.

I found the following information on Time Machine help about restoring Aperture library from TM
Restoring Your Aperture System
If you buy a new computer or use another system at a different location and want access to the Aperture library, you can install Aperture and then transfer the library from your vault (on your backup disk) to the other computer. If you experience equipment failure or other unexpected events, such as fire or weather-related damage to your equipment, you can easily restore the entire library to your new computer from a backup disk.
HideTo restore the entire library from an external backup disk
Restoring Your Aperture System
If you buy a new computer or use another system at a different location and want access to the Aperture library, you can install Aperture and then transfer the library from your vault (on your backup disk) to the other computer. If you experience equipment failure or other unexpected events, such as fire or weather-related damage to your equipment, you can easily restore the entire library to your new computer from a backup disk.
HideTo restore the entire library from an external backup disk
If you buy a new computer or use another system at a different location and want access to the Aperture library, you can install Aperture and then transfer the library from your vault (on your backup disk) to the other computer. If you experience equipment failure or other unexpected events, such as fire or weather-related damage to your equipment, you can easily restore the entire library to your new computer from a backup disk.
HideTo restore the entire library from an external backup disk
Connect the hard disk drive that contains the most up-to-date vault to your computer and open Aperture.
Choose File > Vault > Restore Library.The Restore Library dialog appears.
Choose the vault you want to use to restore your library from the Source Vault pop-up menu.If the vault doesn’t appear in the Source Vault pop-up menu, choose Select Source Vault from the Source Vault pop-up menu, navigate to the vaults location in the Select Source Vault dialog, then click Select.
Click Restore, then click Restore again.

FM for Material number conversion from R/3 to APO in R/3

Hi,
   Can anybody tell me conversion exit (function module) for Material number conversion from R/3 to APO in R/3 system. I mean i have 18 digit R/3 material number which i have to convert to 40 digit APO material number in R/3 system.
Please suggest to win full points.
Thaniks in Advance,
Chandan Dubey

Dear Chandan,
Conversion Exits:
CONVERSION_EXIT_MATN1_INPUT ....... If you are storing Material With Zeros
Then concatenate it with 22 zeros. i.e. '0000000000000000000000000000'.
For example:
data : v_matnr type matnr,            "R/3 Material
       v_apo_matnr(40) type c,        "APO Material with 40 length
       v_zeros(22) type c. value '0000000000000000000000000000'.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
       EXPORTING INPUT          = v_matnr
       IMPORTING OUTPUT         = v_matnr.
concatenate e_mantr v_zeros into
            v_apo_matnr.
Regards,
Naveen.

Conversion from u0091Stringu0092 to type u0091Dateu0092

Hi,
I am fetching a date from DeliveryDate TextBox from Sales Order. I enter as 10/03/2007. As I need to fetch this value and store it in Production Order DueDate records through SDK Code.When I fetch this value from code,I get as 20070310. When I try to update my Production Order DueDate it gives me an Error Msgbox Conversion from string 20070310 to type Date is not valid. Here is my code to update production order.
Dim DelDt As String
DelDt = MyForm.Items.Item("12").Specific.value
Here DelDt shows 20070310
Now I have created an object of ProductionOrder and try to add Records,
sboProdOrder.DueDate = DelDt
On the above line it gives me that messagebox.
Can any one help me as to how can I convert this code in a working one or how to convert the string to date in VB.Net
Thanks a lot
Murtaza

Hi Murtuza,
Retrieving the value from a date-field through the value always returns the date as a string in the format yyyymmdd.
the field DueDate is a field of type DateTime.Date. to enter the date in this field, you must convert the string to a date.
The following line converts the date-string to a date.
new DateTime.Date(left(DelDt,4), mid(DelDt,5,2), right(DelDt,2))
Regards
Ad

Date/time conversion from UTC to CET

Hello,
Jjust a little question to our SAP BI community!
Is there a BI function/ggod way that converts a (datetime) string DDMMYYYYHH:MM:SS in UTC time zone into a string DDMMYYYYHH:MM:SS in CET timezone ?
We receive this string in input in a flat file and need it to convert from UTC to CET.
Or do you know any way to convert a date/time from IUTC to CET, eveen using an ABAP function?
Thanks a lot,
Matthieu

Hi,
Check this thread for time conversion from UTC to Local time
[ABAP statement for converting UTC date/ time to local date/time],
Regards,
Daya Sagar

Aperture conversion from negatives

Similar Messages

Maybe you are looking for