Aperture Import destination grayed out when importing from iPad

I'm trying to import a bunch of photos from my iPad. I want to dump them all in one project in Aperture, but after selecting the iPad from the import source list, it grays out the options to select the destination. It also grays out the option to uncheck the Autosplit events. I do not want to do this import and then have to go back and merge 20 projects.  Any ideas?

It' how Aperture works with the iPad see Aperture 3: Photos are not split into projects by date when importing from iPad as well as other threads here asking similar questions

Similar Messages

  • Music cuts in and out when streaming from ipad to airport

    After spending 45 minutes on the phone with airport tech support, this is what I was told to do:
    Change the channel to either 9 or 4 in the airport utility or router settings.
    Now music cuts out less often, but it didn't completely resolve the problem. I tried both channels. Does anyone have any other ideas?

    Hi and welcome....
    Try selecting Automatic instead of a particular channel in the Airport Utility.
    If that doesn't help, on your iPad tap Settings in the Home screen then tap General / Reset / Reset Network Settings.
    Resetting to factory settings may help.
    Please take a moment and click *My Settings* on the right side of this page and tell us which Mac and which Mac OS X. Thanks... helps to have a forum profile set up for troubleshooting now and in the future.
    Carolyn

  • Trying to import favorites from Explorer. When i go to the file menu in firefox, import is grayed out and I can't import the favorites

    I am trying to import my Explorer favorites. When I go to the "file" menu, "import" is grayed out and I cannot use it to get to the next step.

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.com/kb/Private+Browsing
    You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    *Deselect: [ ] "Always use private browsing mode"

  • Import Tab grayed out in Aperture 3.1

    Hi folks, need some help:
    When I try to import a .jpg from SDHC or HDD into an existing project in my library, the import tab will gray out and is no more selectable. It is no more possible to switch to the library or to chose another button in the toolbar. I need to close the application and open again to work with.
    Steps to Reproduce:
    Import photos from SDHC-Card with integrated Card Reader or from HDD in a already existing Project, add some metadata-settings during import. Repeat the step several times and always import in a existing project and the the import-tab will gray out. So it is no more possible to move over the library.
    I have tried:
    - Repair permissions
    - Aperture 3: Basic Troubleshooting
    I am using:
    - Mac OS X 10.6.4, current updates
    - Aperture 3.1 clean install
    - Latest Pro-Kit-Updates
    Are there other people having the same GUI-bug like I do? Or is there maybe a solution? I am looking forward to your answers.
    Sincerely'
    Immo

    Hi Folks
    @spikeyjonze: A new local user account has no impact on this issue, it is still present. This steps also belongs to the Aperture 3: Basic Troubleshooting
    @Adrian Wackernah: I also have the same issues, but this issue ain't so big for me. My current issue with a grayed out import tab seems to be much worse. But thanks a lot for your answer.
    @Gary: I also work with shortcut cmd-i to enter or leave the import-window. But I have never tried with <esc>-key to leave to import-window, if the import tab grays out. I will give it a try when I reproduce the bug again.
    I also have opened a case at Apple Care Pro Apps Support Europe. I have send them the System Profiler and a screen-recording of the issue. So I need to wait until Apple has done their troubleshooting and analysis.
    Thanks for your answers. If you have any questions regarding this issue, do not hesitate to contact me.
    Sincerely'
    Immo

  • Import button remains grayed out when adding existing folder to LR 4

    Greetings.  I'm following the steps in the following link from Adobe:
    http://help.adobe.com/en_US/Lightroom/3.0/Using/WSE828B644-9097-46ab-98A7-E2719BBB6647.htm l
    The final step, after selecting the folder I want to add, is to select Import.  Except, the Import button remains grayed out.  I'm not sure what to do in order to select Import and add the folder I already have.
    Thanks,
    Mike H.

    Thank you for the information.  Yes, that seems to make sense based on what I've discovered using LR 4.  Still trying to come up to speed.  Appreciate everyone's help with their tips and insight.
    Date: Tue, 24 Apr 2012 01:44:25 -0600
    From: [email protected]
    To: [email protected]
    Subject: Import button remains grayed out when adding existing folder to LR 4
        Re: Import button remains grayed out when adding existing folder to LR 4
        created by LRuser42 in Photoshop Lightroom - View the full discussion
    Folders per se cannot be imported - only pictures (or movies) in a folder can. So, you have to select a folder containing at least one picture or movie (all pictures and movies found are automatically selected when the import dialog opens). This is probably not the case for the folder you want to add, so "no photos found" is displayed in the dialog center and the "Import" button is greyed out.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4356518#4356518
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4356518#4356518. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I downloaded Adobe immigration software for Aperture, opened Lightroom, but the Aperture library was grayed out so it couldn't be selected to import. How do I get it to work? I only have a few days left on the test version of Lightroom to see how it works

    I downloaded Adobe immigration software for Aperture, opened Lightroom, but the Aperture library was grayed out so it couldn't be selected to import. How do I get it to work? I only have a few days left on the test version of Lightroom to see how it works with my Aperture library.

    Gracias photo-enthusiast por tu respuesta pero hay docenas de de usuarios que tienen esta mismo problema, me da la sensación que nos tomas por gagas que no tenemos ni idea de lo que tenemos entre manos.
    Me alegro enormemente que no hayas tenido tu este problema.

  • Iphone went out, when i did get it back on up in the top left of screen it continues to show searching, and wi-fi is grayed out keeping me from restoring it. what can i do to fix this?

    Iphone went out, when i did get it back on, up in the top left of screen it continues to show searching, and wi-fi is grayed out keeping me from restoring it. what can i do to fix this?

    Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting, but it can clear some glitches.
    If this does not work, try to set it up as new device without using the latest backup.
    How to back up your data and set up as a new device

  • "Access Control - Do Not Inherit" Grayed out when setting up a backup on Server 2008 R2 when trying to use remote NAS

    I see one response here:
    http://social.technet.microsoft.com/Forums/en-US/c99eead0-e2fc-4c83-8cb2-959d03512667/server-2008-r2-dc-backup-greys-out-do-not-inherit-option-for-file-share-backup
    But it makes no sense to me. Running that command doesn't do anything.
    How do I make the box stop graying out when setting up a backup with the GUI interface? This should be really simple I would think and for some reason the backup utility is graying out the "Do Not Inherit" option so I can backup to the NAS
    device that has access control enabled in order to backup to the NAS.
    Thanks in advance!

    Hi,
    From this article, it mentioned that it is by design that we cannot choose "do not inherit" in backup schedule when backup target is a remote shared folder.
    Checklist: Schedule Automatic Backups
    http://technet.microsoft.com/en-us/library/cc732540.aspx
    If you use a remote shared folder, make sure that the folder is available, that you have write access to the folder, and that you are a member of the Administrators group or Backup Operators group on the computer hosting the folder. Each time you create
    a backup, it will overwrite the older backups so that you will only have one backup at a time.
    The backup will inherit the access control list (ACL) permissions of the folder.
    For the account it required, as mentioned above, it should be "a member of Admin group or Backup Operators group, and it should have write permission on target folder".
    Also map a network folder as a drive will not help show the mapped drive letter in backup destination. It is still a remote shared folder.
    TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

  • What causes areas to be grayed out when viewing in Acrobat 9?

    What causes text to be grayed out when viewing in Acrobat 9?
    Douments which were fine in Acrobat 9 suddenly have areas blacked or grayed out.  The same thing happens if opened in Acrobet Reader.  Is there a setting that causes this.

    It could be that the text is an image.
    Try going to Edit>Preferences>Page display>Page content and information and check the box hat says "Display large images".

  • Items grayed out when they should not be

    I have some apps where files that should be available for opening are instead grayed out when they shouldn't be. They never used to be grayed out until recently, and they are a correct file type. (Open is set to "All files" not just the file extension, so it's not an oversight).
    Which part of the OS is responsible for choosing what items will be available in a file list (i.e. not grayed out)? I'd like to rebuild it since it seems to be corrupted. Also my LaunchServices seems to be messed up as well because some apps are not available for certain file types "Open With" when they ought to be. Terminal command? Disk Warrior? TinkerTool? Thanks.

    Hi,
    If you aren't confident in using Terminal check out this site for help with Launch Services.
    http://www.thexlab.com/faqs/resetlaunchservices.html
    Carolyn

  • Should be the bluetoot symbol grayed out when the bluetooth is turned "ON"or it should be highlighted in white like rest of the active symbols are? Please unswer this simple question clearly. Thank you.

    My blutooth symbol on the new i-Pod 2 is grayed out when the option is turned "ON". Shouldn't be highlighted white like the rest of the symbols are?

    when blue tooth is turned off in settings, the symbol does not show at all.  when BT is turned on in settings, but there is no connected device, it will show the symbol gryed out.  When BT is on, and connected to an active device, it will show as bright white.

  • Am working with trial version of photoshop elements 12. Layer functions remain grayed out when trying to use.

    I'm working with trial version of Photoshop Elements 12. Layer functions remain grayed out when trying to use them.

    You need to have an image open in the main window.

  • Suddenly cannot send messages from ipad. Can send from iPhone and they show up on messages but when sending from ipad a they say not delivered

    Suddenly cannot send messages from ipad. Can send from iPhone and they show up on messages but when sending from ipad a they say not delivered

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Set Up Alert Sounds
    http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
    Extra FaceTime IDs
    http://tinyurl.com/k683gr4
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Fix Can’t Sign Into FaceTime or iMessage iOS 7
    http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
    http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457#19087457
    How to watch FaceTime calls on the big screen with Apple TV
    http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • 2540 printing problem, missing lines when printing from iPad

    Bought a new 2540 to use with iPad, printing direct from wireless direct to printer and missing lines, tried copying and everything is working/printing ok. It just appears to be when printing from iPad. I have tried powering down printer and rebooting but still the same.
    Any help appreciated.

    Hey ,  Welcome to the HP Support Forum.  I see that you're having what sounds like AirPrint quality issues with your HP Deskjet 2540 All-in-One Printer. I would like to assist.  Your 2540 is AirPrint compatible, but not all app content and file formats are AirPrint friendly. I recommend installing the HP ePrint app. (I'm assuming you don't have WiFi if you're a wireless direct user. If that's the case try and visit a public space with WiFi and install the app there. Once installed you can use it within a wireless direct setup).  Let me know if this helps. Thanks for reaching out and have a great day!  

  • HT1491 Search option tab doesn't appear on my iTunes Store when accessed from iPad or iphone

    iTunes Store has recently been launched in India ....however search option tab seems to be missing in the app when accessed from iPad or iPhone. Also the purchase option is visible in iPad but missing in iPhone

    Me too. 34000+ items.
    Gotta wonder if that's a factor.
    Just now I removed all remotes from iTunes.
    (Prefs > Devices > Forget All Remotes)
    Then I turned on Home Sharing on my iPhone.
    (Tap the gear icon in the Library selection screen.)
    Previously the iPhone was registered as a regular remote.
    So both devices are controlling iTunes via home sharing.
    Now iTunes is not crashing at all, in full-screen mode or otherwise.
    Not sure if it will last, but time will tell.
    Hope this is useful to you.
    I'll post back if the crashes return.

Maybe you are looking for