Aperture library transfer to iPhoto library

I'm unhappy with Aperture and now that I hear Aperture will be discontinued I want to transfer all of my photo's (20K) from Aperture into an iPhoto library. How can I do this?
And is this even wise considering the new Photos?

If you have the latest version of both Aperture and iPhoto then there is no transfer. iPhoto will just open the Aperture Library.
Both Aperture and iPhoto are discontinued.
The new Photos app will also work from an Aperture library.

Similar Messages

  • IPhoto to Aperture Library Transfer Oddity

    Or maybe I should have just said iPhoto Library oddity, since Aperture seems fine, and in the end, seems to have done what it should have.
    Let me explain:
    A few weekends ago, I started to transfer my entire iPhoto library from iPhoto v7.x (current version) to my Aperture v2 library. I started my iPhoto library over three years ago, using iPhoto v5 and OS X 10.4, later upgrading to iPhoto v6 via iLife ’06 in mid 2006, and finally iPhoto v7 via iLife ’08 last Fall. I then upgraded to Leopard and Aperture v2 this past Spring.
    After transferring some 46,000 photos (with most being RAW + Jpeg pairs) from iPhoto to Aperture, I noticed that a there were a large number (approximately 1,800) of stacked photos were one photo was an iPhoto Original RAW photo, and the other was an iPhoto Edited RAW photo. The curious thing is, I didn't edit all of those RAW files in iPhoto, I only edited a select few dozen of them. It should be noted that all of the edited and original Jpegs pairs were also stacked, and the orientation of all of them looked fine.
    As it turned out, all of these mysteriously edited photos were shot as verticals, none were horizontals. And when looking at the unstacked pair, the edited photo was properly rotated, but the Original iPhoto RAW photo was not, despite having its orientation listed as portrait. When I rotated an Original iPhoto RAW photo to correct it, the orientation was changed to landscape, even though the photo was displayed in portrait mode.
    Upon further digging, it seems that all of the vertical photos that were imported into iPhoto v5 were affected, as were some of the vertical photos that were imported by iPhoto 6, but none of the photos imported be iPhoto v7. I don't remember the exact dates that I imported them and when I upgraded iPhoto, but the timeline seems close.
    I also noticed recently when using iPhoto that the info display panel listed some of the RAW photos as “Jpeg (From Nikon RAW)”. I have not spot checked these files yet, but I suspect that these are the photos that resulted the creation of the Original & Edited iPhoto stacked pair in Aperture.
    I do realize that iPhoto converts RAW files to Jpegs if you edit them, and I would expect that it does not when you don’t edit them. However, it would appear that iPhoto v5 always did when it rotated them, iPhoto v6 did some times, and iPhoto v7 doesn't.
    I’m puzzled as to how these RAW files got edited in the first place.
    I can only guess that it happened as either:
    1) The result rebuilding the cache at some point, or
    2) Possible as a result of a conversion process for the iPhoto updates, or
    3) How iPhoto handled RAW files, particularity with iPhoto v5.
    But as to why these particular files were affected, and most of the vertical shots were OK, I don't know. Any Ideas?
    As for the iPhoto edited RAW photos, I plan to delete them since there doesn't seem to be a point in keeping them, because I have the original RAW file, and the original and edited Jpeg versions. They were easy to find using keyword and Aperture excellent filtering tool.
    Incidently, I've also had some problems with the "Black Frames" problem and also the "Unsupported File Format" error with photos that were directly imported into Aperture. I hope that my photos are not corrupted.
    Other than that, I'm really liking Aperture2 a lot!

    My iPhoto library shrunk drastically when I switched to Aperture, from around 13.8GB it dropped to 9GB. I was worried at first but everything appears to have showed up.
    The only things that I can attribute it to is the fact that when an image is imported into iPhoto with auto rotate data, the image is duplicated before it is rotated in Aperture it is not.
    iPhoto duplicates the image on virtually every modification.
    My iPod photo cache was quite large as well, but Aperture does not import this.
    Videos you may have in iPhoto will not be imported into Aperture.
    I also get the feeling that preview and tumbnail data is more optimized in Aperture.
    If you are unsure backup your iPhoto library to an external drive as a read-only disk image, then if you find any problems with your photos in Aperture you can go to the disk image and get them.

  • Transfer aperture library to iPhoto library

    how to transfer aperture library to iphoto library?

    If you have the latest version of iPhoto you can open the Aperture library with iPhoto.  No transferring needed.

  • Transfer of iPhoto Library to Aperture 3

    I installed and ran the trial version of Aperture 3, and I attempted to import my iPhoto Library. I choose the option to leave the photos where they were, and 2 hours later, Aperture is still saying it is processing the data. The number of photos is listed as 4634. Is this normal? Should I let it keep working or attempt to quit Aperture 3?

    The amount of time Aperture takes to import an iPhoto library or update an Aperture library from a previous version depends on a number of factors. Size of the  library, location of the library, system type, other activity going on on the system, etc.
    4-5 hours is not outrageous many user report times much longer than that.

  • Aperture Library from iPhoto

    As a new user of Aperture i do not understand the issues relating to transfer of an existing iPhoto library to Aperture.
    I do understand that Aperture does use an existing iPhoto library without the need for migration, but i did a test and migrated the libary to Aperture and found that the detail was the same in both libraries but the file size went from. 28GB too 49GB, i would e greatful if i could get an explanation as to
    1. Why the file size grow by so much
    2. As Aperture uses an existing iPhoto library is there any benefit in migrating the library
    3. If migrating the library helps is there a way of then sliming down the file size
    Thanks in advance

    i do not understand the issues relating to transfer of an existing iPhoto library to Aperture.
    There are no issues as there is no transfer. Just open the Library with Aperture. Done.
    As to your other questions: how did you Migrate the Library to Aperture?
    And no, there is no benefit in migrating the Library.

  • How can I transfer my iphoto library from a Mac OS Extended (Case-sensitive, Journaled) harddrive to a Mac OS Extended (Journaled) hard drive?

    Community,
    Every time I try to transfer my iphoto library from a Mac OS Extended (Case-sensitive, Journaled) harddrive to a Mac OS Extended (Journaled) hard drive, I receive the attached message: "You can't copy 'iPhoto Library' because it has the same name as another ideon on the destination volume, and that volume doesn't destinguish between upper- and lowercase letters in filenames."
    My theory is, if I am able to unpackage my iphoto library, I can transfer each folder one at a time so that I can trouble shoot any "duplicates." Will this work?
    Let's say that works. How can I repackage the library so iphoto recognizes it?
    Is there a better way?
    Thank you,
    Jonathan

    Can we assume that I don't have any naming conflicts? Clearly there are or else I wouldn't get the error I'm getting.
    The error doesn't mean you have name conflicts. It means that the Finder won't take the chance that you might have them.
    You're suggesting that all I would need to do would be to use Carbon Copy Cloner to transfer the files from the case-sensative harddrive to my Extended Journaled harddrive?
    Yes. But I would just use the built-in rsync shell command. First, back up all data if you haven't already done so. Launch the Terminal application by entering the first few letters of its name into a Spotlight search. Copy or drag -- do not type -- the line below into the Terminal window, then press the space bar:
    rsync -aE --delete
    Now drag the iPhoto library you want to copy into the window. You should have something like this:
    rsync -aE --delete /Users/you/Pictures/iPhoto\ Library
    Drag the Pictures folder on the destination volume into the window. Now you have this (line will wrap on the page):
    rsync -aE --delete /Users/you/Pictures/iPhoto\ Library /Volumes/something/Users/you/Pictures
    Press return. The copying operation will start. When it finishes, you'll see a new dollar-sign ("$") prompt below what you entered. If there were no errors, you're done.

  • I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library?

    I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library? I assumed that like  the videos in iPhoto, I would be able to access the videos in Aperture through iMovie. Come on Apple! I am starting to get frustrated with your products here. And this is saying a lot when I have been using and loving apple products for the last 4 years.

    Hi. My camera is a Canon 600D. And yes my videos are stored in the Aperture library and they are not referenced. Even then I tried to select all the videos in Aperture and clicked 'consolidate masters' and there was a messge that said all 'none of the files are referenced',... so they didn't need consolidating.
    I also tried preferences> export> external video editor > choose > iMovie. And then right click on the video to edit with imovie. Even then the video didn't show up in iMovie. It seems like the only option for me is to import the videos directly to iMovie which means there will be two versions of the same file stored in my computer eating up space.
    APPLE. What are you doing?

  • HT4889 How can I transfer my iPhoto photos and iTunes library to my new iMac?

    How can I transfer my iPhoto photos and iTunes library to my new iMac?

    If the Migration Assistant won't do it, move them over as you would any other folder; they're located in the Pictures and Music folders of your home folder by default. The iPhoto library needs to be transferred via a drive, partition, or disk image formatted as Mac OS Extended or through an AFP network share.
    (72915)

  • How to keep my Aperture library from showing up in other user's iPhoto?

    I use an iMac 24 with OS 10.8.2  I use Aperture on my account and my wife and kids use iPhoto on their separate accounts on the same computer.
    For some reason, over the last few months, everytime they open thier iPhoto, my Aperture photos show up first in there.  They have to wait until iPhoto stops its spinning beach ball (creating previews maybe?) before they can hit the Events box to find their own photos.
    I have never set anything up to share libraries or anything like that.  This behavior started on its own, possibly during one of the recent system upgrades.  I have looked in the iPhoto preferences to see if there was an option to "automatically open Aperture library at launch" or something similar but could not find any such thing.  Even a search on these boards has been inconclusive.
    Does anyone know how I can keep all these iPhotos from opening up other libraries by default?
    This is almost as annoying as the 'New software is available" alert message which keeps popping up in everyone's account, even the non admin ones and even after I have done all the available software updates.
    Thank you for any help.
    Bo

    Thank you Frank. I did check those settings and none of them were "on".
    Here are two new bits of info to narrow down the issue:  It seems that this behavior happens only the first time after I import a new set of images in Aperture from a SD card, and only the first time iPhoto is opened after that operation.
    In other words:
    1. Import photos in Aperture in my account
    2. The first time one opens iPhoto in another account it will automatically display the new photos that were imported in my account.
    3. as soon as I click on "events" in that iPhoto session, all of these last imported photos disappear and only the ones that belong in that iPhoto library remain.  All is working normally from then on.
    Really odd.  Almost as if a snapshot of the last imports was automatically distributed to all account and not purged until manually done so...
    And secondly, although Aperture is teh very latest version, I still have iPhoto '09 (v 8.1.2).  I wonder if there is a bit of incompatibility with it and OS 10.8.2 maybe...
    Bo

  • How do I transfer my iPhoto library from my old Mac Book to my new Mac Book Pro?

    I took delivery of my new mac Book Pro at the weekend and was unable to transfer all my data from my old machine at the time of set-up. Can someone tell me how I can transfer my iPhoto library to my new machine while keeping all photos in the events categories I have?
    thanks

    Quit iPhoto if open.
    Open your Pictures folder and select the iPhoto Library.
    Copy the iPhoto Library folder or package to your new computer.

  • What is the best way to transfer my iphoto library from old imac to new imac. both have iphoto 9.2.1

    What is the best way to transfer my iphoto library from current imac to my new imac.  Both imacs have iphoto 9.2.1
    os on old imac is 10.6.8.   os on new imac is 10.7.2.   I want the albums  and events to stay intact.  I have 4500 photos and 79 videos. 14.9 gb. looking for some advice here. Thanks so much.

    Connect the two Macs together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
    LN

  • I just noticed that I can no longer select photos out of my finder that are located in my Aperture/Iphoto Library.  I used to be able to attach photos to my gmail out of the aperture library in the finder and for some reason, no longer can.

    I just noticed that I can no longer select photos out of my finder that are located in my Aperture/Iphoto Library.  I used to be able to attach photos to my gmail out of the aperture library in the finder and for some reason, no longer can.
    I can't access these images except to go into the applications. 
    Also, I'd like to import my iphoto library into aperture, and move aperture library to an external drive.  I tried the import first, but there wasn't enough space.  Then I tried copying over the aperture library onto the external drive but it failed bc it said file was in use. 
    As it is, I only have 50gb left on my imac, and the aperture library is 150gb.  Also, I have over 10k images in both libraries combined and there are tons of duplicates that need to be sorted, and hopefully not messed up because I've organized most of them.
    So in short, I need to know how to do the following:
    -select photos in finder in aperture/iphoto libraries
    -move aperture library to live on external drive
    -import iphoto library into aperture library
    -eliminate dups but maintain organization
    -moving forward i need a better workflow so that I import images from camera, and can organize right away into albums rather than creating projects by default and then creating albums so essentially the photos are in 2 different places, even tho they are referenced
    -live happily ever after
    Thanks in advance for any support you can offer!!

    If you're using apps like iPhoto or Aperture then they replace the Finder for managing your photos. The point is that you use the (many) options available via these apps for the things you want and need to do with the Photos.
    So, simply, you don't select the photos in the Finder. I'll append the supported ways to do this - which are faster and will yield the current version of your Photos - to the end of this post.
    -move aperture library to live on external drive
    Managed or Referenced Library? Managed -
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit Aperture
    2. Copy the Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching Aperture. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Referenced -  relocate your Masters first.
    These issues are covered in the Manual and on this forum hundreds of times.
    -import iphoto library into aperture library
    FIle -> Import -> iPhoto Library? Have you done this already? If so are you trying to move the Masters to Aperture from an  iPhoto Library? Or Consolidate them?
    -moving forward i need a better workflow so that I import images from camera, and can organize right away into albums rather than creating projects by default and then creating albums so essentially the photos are in 2 different places, even tho they are referenced
    You can't. Every photo is in a Project.  They’re the basic building blocks of the Library.
    You might want to spend a little time with the manual or the video tutorials. I'm not sure you've grasped the app  you've purchased.
    The following is written for iPhoto, but about 97% works for Aperture too.
    There are many, many ways to access your files in iPhoto/ APerture:   You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics. This is what you use to attach your shot to your GMail
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    There's a similar option in Outlook and many, many other apps.  If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto/ Aperture.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    If you want to access the files with iPhoto/ Aperture not running:
    For users of 10.6 and later:  You can download a free Services component from MacOSXAutomation  which will give you access to the Library from your Services Menu.
    Using the Services Preference Pane you can even create a keyboard shortcut for it.
    or use this free utility Karelia iMedia Browser

  • Merge two iPhoto libraries into an Aperture library for my Macbook Air

    Hey,
    I've searched around a bit for this but can't seem to figure out how to to it.
    I'm trying to manage my ~140GB photo library on my Macbook Air which has 128GB of HDD.  On top of that, you can imagine that most of that 128GB is filled with system stuff.
    My objective is to keep most of my library offline from the Macbook Air, but still keep it all together. 
    I kinda went "all-in" with iPhoto a few years back to organize my photos so gave up on Aperture.  I'd always wanted to move to Aperture or Lighroom but the migration appeared to be a complete disaster.  Now with "transparent" compatibility it seems like a no brainer to get the best of both worlds. 
    I thought that Aperture allowed you store files on external hard drives but still have "thumbnail" access to them even when the drive wasn't connected.  Or did I misread that?  (Is that Lightroom?)
    Anyway with the new update I thought that I could merge my available iPhoto libraries into one Aperture library that I could always have access to, while offloading the actual photos somehow to an external HDD. 
    This would be a real winner for me.  It seems tho that an iPhoto library stays an iPhoto library.  So while merging might be helpful for someone with a big hard drive, it's completely useless for me as if anything, I need to split.  Or create more.  Or some other form of adding complexity.
    Any ideas here? 

    Figured this out on my own. 
    Make a backup of everything - Aperture seems to require rebuilds and stuff and stories abound of "things going a bit wrong." 
    Did you make a backup?  If you don't want to or can't, I wouldn't do this.  After all, it's your photos!
    Setup your Aperture library on a USB drive.
    Update iphoto to the newest version.  Open all your libraries in iPhoto to update them.  This may take awhile depending on library size.
    Import whatever iphoto libraries you have to Aperture.  This make take awhile (hours!) - if your stuff is more than say 25 gigs I'd recommend setting it up for overnight.
    Once everything is in Aperture - check its all working right.  Then go ahead and maybe make another backup
    Then migrate your photos out of the library.  This takes all the originals and stores them elsewhere, called "offline".  Once they're there, you can't move them around, so pick a good spot!!  This also takes forever.
    Once this is done your Aperture library should be smaller and just copy it to your MacbookAir
    I'm still working on this as it looks like something went funky and I have to rebuild my thumbnails, another overnight processing thing. Like I said, keep a backup   But I have a slimmed down Library on my Macbook Air now which is what I wanted.
    This whole thing is kinda a mess and while it's feasible Apple hasn't made it easy.  There's also some crazy stuff Aperture does with thumbnails and "previews" so that they take a bunch of space up (in my case almost as much as my photos), so you might have to work with that. 
    The guy at Apertureexpert.com is a genius. 
    Check out this post for more on slimming your Aperture Library:
    http://www.apertureexpert.com/tips/2010/1/20/reducing-library-sizedramatically.h tml
    Edit:As a side-note I put some HTML in my message and it looks like it isn't used in the forum - why does Apple bother having the formatting tools if they don't work?  Kinda like the close-door button on an elevator?
    Edit2: Haha it shows up in the answer but not in the normal thread.  Strange, eh?

  • Iphoto 09 "Show Aperture Library" can't load images from Aperture 3.1

    I'm trying to create a calendar in iPhoto 09 using my photos in Aperture 3.1. When I select from iPhoto "Show Aperture Library" I just get the spinning wheel. Below is my environment and what I have tried:
    Environment:
    * iMac 27 3 ghz
    * 4 G Mem
    * 10.6.5 OSX
    * iLife 09
    * Aperture 3.1
    * All updates applied
    Below is what I have tried/verified:
    * In Aperture, Preferences, set the previews to share with iLife and iWorks "Always"
    * Reviewed export Presets - didn't see anything that may apply
    * Verified it worked on my old iMac (20 inch 2 ghz, ilife 09, Aperture Trail version 3.0.1)
    * Created a new Aperture library (new mac) and still can not see it from iPhoto
    Unfortunately, I can get into the Trail version on the old mac (expired) to see if something is configured differently or if this function is not supported in Aperture 3.1.
    I know I can export from Aperture and Import into iPhoto, but thats seems like a lot of work for what I need to accomplish.
    Someone please show me the light!

    It should work in 3.1 also so thats not the issue.
    First if you try to access the Aperture library from an application other then iPhoto, say mail, does that work? If it does then the problem is most likely with iPhoto. If you get the 'spinning beach ball' in mail then its looking like Aperture.
    Assuming its Aperture you should go through the steps outlined at [Aperture 3: Troubleshooting Basics|http://support.apple.com/kb/HT3805]. Do those and let us know what happens.

  • Viewing Aperture library items in iPhoto as workflow help

    I wanted to view my Aperture library jpegs in iPhoto without opening Aperture. The reason for this is to use iPhoto to review my pictures and to open in an external editor from iPhoto. We use Fireworks in designing web sites and newsletters. I did not want to save to another folder which takes up space. The workflow requires the use of Fireworks, crop out what we need from or graphics/pictures and place in the final work for Dreamweaver.
    I opened the Aperture library content and dragged the image folders to iPhoto. It did take the pictures and gave a notice for the files that were not imported. These were jpeg files, not the raw. Advantage is that the Aperture library is now the one resource for our workflow. I can switch from FireWorks to Photoshop when needed. We did not try this with the Raw files, but I suppose that could be done too. Opening the raw in PS would be helpful to some workflows.
    I thought this was a good tip. It has saved us quite a bit of time and is easy to use.

    I'm not sure I understand. If you're using iPhoto to review and edit jpg files you've pretty much nuked any reason to use Aperture at all. It also means that edited copies of your images are not tracked as versions and aren't backed up in the vault. Can you explain a little more what your workflow is?
    I'm do not want versions tracked in Aperture in this case. I want samples of textures or parts of image available for use in designing other graphics. We are in the graphics studio and want to open files in FireWorks, crop/marque out parts and paste to another FireWorks file. I have iPhoto set up to open externally in Fireworks. Think of it as needing 'clip art' out of picture in the library.
    What we are doing is designing banners for web sites and newsletters. I might want a horizon/sunset only as a background to blend into the banner. I have iPhoto open already along with Fireworks and Dreamweaver. No need to have Aperture or any other program open now. iPhoto has the jpegs..... click to open in FireWorks, marque, copy and past the parts I want into the banner design.
    Before that I had to have a resource folder of jpegs. The Aperture library can now store jpegs and access them from iPhoto. I have to hunt quickly through hundreds of image we have store for each texture and different subjects for these banner creations.
    Hope this helps. We just need small parts of any given image. This was a good solution. I'm sure there are others too.

Maybe you are looking for