Aperture upgrade won't open with serial number

I have a retail license for aperture version 2.1 with the serial numbers on the jacket for the cd. Several times after upgrades the new version will ask for my name and serial number. The latest upgrade to 3.4.5 tells me that my serial number is invalid. Any suggestions?

Thank you so much for your reply but I want to apologize for wasting your time with this question. I was making a "rookie" mistake by using my cd jacket information from version 2.1. After reading your reply I looked further into my cd's and found the version 3.0 cd with the info I needed on the jacket. The correct serial number works fine with the upgrade.

Similar Messages

  • I have my aperture upgrade by not my original serial number

    I have my aperture upgrade but not my original serial number.
    any ideas?

    You need to contact Apple with a proof of purchase:
    See this document:
    Pro Application Replacement Serial Numbers:  http://support.apple.com/kb/HT1861
    -- Léonie

  • Have CS5 Master Collection and CS6 Master upgrade won't recognize CS5 Serial Number

    No way to talk to adobe. Web site says the upgrade should work but it does not recognize the CS5 Master Serials.

    Error "The serial number is not valid for this product" | Creative Suite
    http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
    You can get Adobe Support help thru chat:
    Serial number and activation support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Bought Aperture 3 Upgrade. Won't accept my Serial Number from Aperture 2...

    I have Aperture 2 and my Aperture 3 Upgrade will not accept the serial number no matter how many times I try it. Please help. Why the he11 doesn't Apple have easy contact numbers for situations like this?
    Thanks.

    I assume you are entering the characters correctly with all letters in uppercase and all dashes included. If so, I’d call Apple.
    By the way, before I upgraded, I renamed the version 2 Aperture program Aperture 2.1.4. This way when I installed my upgrade it created a new version 3 Aperture program, “Aperture”. I wonder if following this technique will get around your problem with the version 2 serial number.

  • Have Adobe Standard CS 5 (Student), and would like to upgrade to Creative Cloud (Non-Student) - won't accept my serial number for special pricing for existing users

    I currently use Adobe Standard CS 5. It was bought with the Education discount. I would like to upgrade to Creative Cloud and see that they have special pricing for existing customers that use past versions of Creative Suite. I am no longer in Education, so I will have to buy a full version. This is fine, but it won't accept my serial number for the discounted pricing. Is there something else I should be doing?

    Hi there
    Please contact our Sales team who will assist with your order - 800-585-0774
    Thanks
    Bev

  • CS 3 Unable to install enterprising version with serial number screen opening

    unable to install enterprising version of CS 3 without serial number screen opening.
    History:
    originally download trial version it expired before I could deactivate it
    also installed CS (1)
    followed detailed steps to uninstall both of these.
    However computer must think that it is doing an upgrade and asks for a serial number which I don't have
    Any insight and you are my hero of the day!!

    This post should definitely help you
    http://blogs.msdn.com/sqlserverfaq/archive/2009/01/30/part-1-sql-server-2005-patch-fails-to-install-with-an-error-unable-to-install-windows-installer-msp-file.aspx?CommentPosted=true
    Feroz
    Mark as Answer if it helps. This posting is provided "AS IS" with no warranties and confers no rights.

  • Trying to install Adobe Photodeluxe (elements 13)   I have box and cd sleeve with serial number,   But registration won't let me type letters only numbers allowed.  Help please.

    Trying to install Adobe Photodeluxe (elements 13)   I have box and cd sleeve with serial number,   But registration won't let me type letters only numbers allowed.  Help please.

    You possibly have a redemption code which has to be converted into a serial number.
    https://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • I've upgraded to Snow Leopard, Aperture 3 won't open.

    I've finally upgraded to snow leopard (hoping the bugs would all be worked out!)  Aperture 3 won't open.  I did the "fix" found under aperture support.  However, the advised,  3.1.1 update for aperture won't open either, saying it I need to install aperture 3 first (it is installed!)  help please....

    Please see this thread and do follow all the instructions.
    Just upgrade to Snow.  Now Aperture 3.1 will not start.
    I know you have Aperture 3 installed and feel its silly to reinstall it but just try it.

  • I got a macbook pro with serial number C1*****V30 but i want the full details of the laptop without opening it. how?

    i got a macbook pro with serial number C1*****V30 but i want the full details of the laptop without opening it. how?
    <edited by host>

    Also in the future please do not post your serial number in the forum.  See this tip on identifying Macs in the future: https://discussions.apple.com/docs/DOC-6413

  • Having installed Aperture iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?

    Having installed Aperture, iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?

    OK, fixed it.  Found that iPhoto is now BACK in the App store.
    Found iPhoto app in Finder and dragged it to Trash.
    Downloaded iPhoto from App store and all now back working again.
    Didnt expect to find iPhoto in App store as last time I looked it wasn't available.
    Nige

  • Aperture won't save the serial number under Snow Leopard

    When purchasing the unibody MBP17 in the last month, had Aperture (2.1.4) pre-installed. Worked fine under Leopard, no problems. Upgraded to Snow Leopard this past Friday and when launching Aperture, the program never has the serial number filled in. I have to enter the serial number each time I launch the program.
    Anyone else notice this problem? If so, any ideas on how to solve it?
    Thanks in advance
    Roger

    Yeah, I've discovered I have the same problem. Sorry to say that I haven't discovered a solution.

  • I'm TRYING to try the 30 free trial of Aperture. It downloads fine, but the promised email with serial number (needed to activate) never arrives.  I've double checked email address.  Anyone have a solution?

    I'm TRYING to try the 30 free trial of Aperture. It downloads fine, but the promised email with serial number (needed to activate) never arrives.  I've double checked email address.  Anyone have a solution?

    This has been reported numerous times in the past. It seesms that from time-to-time the response system responsible for sending the key goes away.
    Take a look at the More Like This box on the right hand side of this page. Some users have had success getting the key sent in various ways.

  • IDVD won't open with OS 10.5.8 -can't record on to blank DVD discs

    When I attempt to open iDVD application, message says it won't open with this OS. Also when I insert a blank DVD (Verbatim) disc am unable to record a film on to it as I get this message: "The disc can't be burned because the device failed to calibrate the laser power for this level of media." I've seen this message on a previous post on this forum but could not see any solution posted. I have recorded onto DVD discs in the past (different make of disc and before I upgraded to Leopard).
    I can record on to blank CD audio discs without any problem however.

    The first thing to try (IMO important) is not to import directly from your camera. Get a Firewire-connected card reader (USB works also but is slow on Macs) and use the Mac's Finder to copy images from the card to a folder on the Mac hard drive. My description below describes a CF card, but the workflow is the same for an SD card or whatever.
    I feel pretty strongly that camera-to-Aperture handling of original images puts originals at unnecessary risk. I suggest this workflow, first using the Finder (not Aperture) to copy images from CF card to computer hard drive:
    • Remove the CF card from the camera and insert it into a CF card reader. Faster readers and faster cards are preferable, and Firewire is much preferable to USB2.
    • Finder-copy images from CF to a labeled folder on the intended permanent Masters location hard drive.
    • Eject CF.
    • Burn DVD copies of the original images (optional backup step).
    • Eject DVDs (optional backup step).
    • From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location."
    • Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing).
    • Reformat CF in camera, and archive DVDs of originals off site.
    Note that the "eject" steps above are important in order to avoid mistakenly working on removable media.
    Good luck! The camera-to-Aperture workflow may or may not be the cause of your specific problem this time but in any event card-to-finder long term will provide a more solid workflow.
    -Allen Wicks

  • Aperture library won't open after using new iphoto

    My Aperture library won't open after accidently using iphoto to view it. It says Aperture is outdated but I run 3.4.5 version which is the last.
    Now I CAN'T DO MY WORK thanks to this lunacy.
    Anyone any suggestions how to fix this ****?

    Also one more thing
    On the MacBook Air - Where aperture is working fine and loading the library, i tried to change the name of the library and then when I tried to open it it shouted with the error ""Error Opening Library--The library could not be imported because it is from an out of date version of Aperture 3. Please upgrade the library to the latest version of Aperture 3 and try again""
    But when I changed the name back it was working fine again on the MacBook AIr
    Should i be worried that when i look at the get info on my library it says it's an aperture library 3.5.1 ?
    Pandava

  • Aperture running in Mountain Lion. Now when I start Aperture it asks me for a Serial Number . Where can I find this as it was a download and I have no packaging?

    I recently purchased Aperture from App store and this was running fine until I upgraded to Mountain Lion. Now when I start Aperture it asks me for a Serial Number . Where can I find this as it was a download and I have no packaging?

    I also have this problem! Mine is also not from the App Store. I had purchased Aperture 1, then upgrades for both version 2 and version 3. It's annoying as it is, but I also have to enter my previous serial number as well since it was an upgrade.
    Following this thread in the hopes that someone will have a solution.

Maybe you are looking for

  • Weblogic 10.3.0 : Loosing a stateless session bean in the bean pool

    Hi, We have a strange situation where we loose a Stateless SessionBean in a Bean Pool in Weblogic 10.3.0 Since we only have one bean in the pool, this effectively hangs all incoming calls. We do not want more than one instance in the pool because of

  • Compiling error ORA-00600 with Forms 6 and Database 10g

    Hi, I am using "Oracle Database 10g Enterprise Edition Release 10.1.0.4.0" and "Forms [32 Bit] Version 6.0.8.26.0 " with patch 17, when i compile a form that works with some tables in another database under dblink the error ORA-00600:internal error c

  • How to Process flat File in Oracle Apps through Concurrent Program

    Hello Everyone, My client has a request, to process a bank file (Lockbox) which is a flat file that will be copied on UNIX box and I will have to create a new concurrent request that will process this flat file and will update receipt information in

  • Dynamic datagrid column based on rowIndex

    I am passing objects into a datagrid that have a rank variable.  Before I place the objects into the datagrid, I sort upon rank so the objects will show in the datagrid sequentially. What I am wanting to do is be able to drag-and-drop the rows, and I

  • How Do I Find the Partition GUID?

    I'm new to server administration and I've been looking for a way to find the GUID of a partition on a hard drive.  I've read a lot of articles on GPT and partitioning in general, and I reviewed all the articles suggested in the Related Topics section