APEX 4.2.2 - ORA-6502 when logging in to application with anything other than Firefox!
If I try to log into my application through anything other than Firefox I get the following message on the screen:
Error
Error processing request.
ORA-06502: PL/SQL: numeric or value error
OK
If I try to access the APEX Builder through a browser other than Firefox, I get no HTML returned.
Last night I upgraded from 4.1 to 4.2.2 and ran the patch that dealt with missing developer toolbars...
Of course, I only ever use Firefox, but my users are using IE...
Any ideas?
Message was edited by: AndyH
Clarified that this is a 4.2.2 issue.
Hi,
I do not know if this relating bug 16760897
Oracle Application Express 4.2.2 - Known Issues
Regards,
Jari
Similar Messages
-
I've had Firefox installed on this computer for a couple of years, but only really started using this computer in the last 6 months. Originally Firefox 14, then Firefox 17.0.01, then finally 19.0
It crashed yesterday on starting, I uninstalled and reinstalled and same issue. I regressed back through version 17.0.0.1 and Firefox 14. I updated Shockwave, Flash, Java. I also uninstalled Divx, AC3 and Adobe Reader (recent installs/updates)
Updated MIcrosoft security essentials and ran a scan, no issues discovered. Updated and ran Superantispyware and found 1 Trojan which I removed.
Crash reporter comes up as soon as the firefox link is actioned. Can start firefox in Safemode.please start firefox in safemode (by pressing the shift-key while it is launching) & go to ''firefox > options > advanced > general'' & disable hardware acceleration.
for some background on that issue you can also refer to [https://bugzilla.mozilla.org/show_bug.cgi?id=812683 bug #812683] -
when syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen. have done the reset and restart, but still get same thing. Ipad does not show up in itunes even though cable plugged in. Have shut down and restarted Windows 7 computer.
I had done all of that to no avail. I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again. I had tried switching the USB port at the front of the machine but that had not helped. Everything is good to go again. thanks for your reply
-
My iPhone 5s has stopped playing music out of the speakers. It works when I plug in my headphones but other than that there's no sound. It just randomly happened so I'm not sure if I can fix it or if I need to bring my phone in. Help?
Hi Cassilecompte,
If you are not getting any sound from your iPhone’s speaker, you may want to troubleshoot using the steps in this article -
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for using Apple Support Communities.
Best,
Brett L -
Why doesn't the rotate gesture on my trackpad behave as it used to for switching between tabs when it works the same with all other programs besides Firefox?
I changed the about:config to make the rotate gesture move between tabs, and it worked great for well over a year. Now it behaves erratically as described here:
https://bugzilla.mozilla.org/show_bug.cgi?id=877598
It used to be very controllable to move one tab over, now it is erratic and moves quickly and to unexpected tabs regardless of how slow I do the rotate gesture. This is the main reason I use Firefox over Chrome and I would like to continue to do so unless there is no fix to this.Just set the browser.gesture.twist.threshold to something around 15-25.
-
The error when I deploy ess application with SDM
SOS!!!when I deploy ess application with SDM(ESS05P_1-10002965.sca), It failed.please help me.
The trace file:
#1.5#00145ED221BE00F7000000B90011A07C0004421B32EEBBA8#1198584492898#com.sap.engine.services.webdynpro.WebDynproContainer##com.sap.engine.services.webdynpro.WebDynproContainer#J2EE_ADMIN#15220####0f7fa990b2e211dca62200145ed221be#SAPEngine_Application_Thread[impl:3]_173##0#0#Error#1#/System/UserInterface#Java###Failed to deploy application '''' for deployment state listener ''''.
[EXCEPTION]
#3#sap.com/essauaddr#com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook#com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to deploy the file '/usr/sap/EP1/DVEBMGS02/j2ee/cluster/server0/./temp/webdynpro/public/sap.com/essauaddr/webdynpro/Applications/com.sap.xss.hr.per.au.address.Per_Address_AU/Per_Address_AU.xml' into the database. Reason: Development Object 'sap.com/ess~au' contains already same repository content. Hint: fully qualified name of the repository VMO must be globally unique.
at com.sap.tc.webdynpro.repository.deploy.RepositoryUpdateManager.checkVMOsExistInOtherDC(RepositoryUpdateManager.java:504)
at com.sap.tc.webdynpro.repository.deploy.RepositoryUpdateManager.deployRepositoryContent(RepositoryUpdateManager.java:98)
at com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook.onDeploy(RepositoryContainerHook.java:232)
at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1007)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:552)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.5#00145ED221BE00F7000000BB0011A07C0004421B32EF7CEE#1198584492948#com.sap.engine.services.deploy##com.sap.engine.services.deploy#J2EE_ADMIN#15220####0f7fa990b2e211dca62200145ed221be#SAPEngine_Application_Thread[impl:3]_173##0#0#Error#1#/System/Server#Java#deploy_5029##Exception in operation deploy with application sap.com/essauaddr.#2#deploy#sap.com/essauaddr#
#1.5#00145ED221BE00F7000000BC0011A07C0004421B32EF7F24#1198584492949#com.sap.engine.services.deploy##com.sap.engine.services.deploy#J2EE_ADMIN#15220####0f7fa990b2e211dca62200145ed221be#SAPEngine_Application_Thread[impl:3]_173##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception in operation deploy with application sap.com/essauaddr.
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.rollbackPart(ApplicationTransaction.java:394)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:294)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:552)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Cannot deploy application sap.com/essauaddr.
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:330)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
... 13 more
Caused by: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/essauaddr. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1016)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
... 15 moreCheck these below links
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4611860
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4562067
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4258751
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4474525
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4543091
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4368694
reward points if helpful -
IPad restarts when we sync our application with iPad calendar for iOS 7.0.2
iPad restarts when we sync our application with iPad calendar. It happens if there is more number of dates to sync with calendar (roughly around 25 and above). It happens when we open the application and initialize for the first time, after installation. Once it restarted everything works fine. It seems that the calendar is using too much of memory. We are using iOS 7.0.2 OS.
Is there anyone experiencing same kind of issue? Is there any workaround for this problem?I got sick of these apps disappearing and finally gave in to doing a full delete all content and settings from phone - then restored from an iCloud backup and it fixed the issue. for now....
Can I get 10 points for solving my own question? -
How do I avoid ORA-01473 when querying hierarchial on tables with VPD predicates
My question is how to circumvent what seems to be a limitation i ORACLE, if at all possible. Please read on.
When using VPD (Virtual Private Database) predictaes on a table and performing a hierarchial query on that table I get the following error message:
ORA-01473: cannot have subqueries in CONNECT BY CLAUSE
My query may look like the folwing:
SELECT FIELD
FROM TABLE
START WITH ID = 1
CONNECT BY PRIOR ID = PARENT
As my predicate contains a query in it self, I suspect that the implicit augmentation of the predicate results in a query that looks like:
SELECT FIELD
FROM TABLE
START WITH ID = 1
CONNECT BY PRIOR ID = PARENT
AND OWNER IN (SELECT OWNER FROM TABLE2 WHERE ...)
at least, when executing a query like the one above (with the explicit predicate) I get the identical error message.
So my question is:
Do you know of any way to force the predicate to augment itslef onto the WHERE-clause? I would be perfectly happy with a query that looks like:
SELECT FIELD
FROM TABLE
START WITH ID = 1
CONNECT BY PRIOR ID = PARENT
WHERE OWNER IN (SELECT OWNER FROM TABLE2 WHERE ...)
or do you know of any fix/patch/release to ORACLE that allows you to include subqueries in the CONNECT BY-clause and eliminates the error message?The WHERE clause or AND clause applies to the line directly above it. Please see the examples of valid and invalid queries below, which differ only in the placement of the WHERE or AND clause. If this is not sufficient, please provide some sample data and desired output to clarify what you need.
-- valid:
SQL> SELECT empno,
2 mgr,
3 deptno
4 FROM emp
5 WHERE deptno IN
6 (SELECT deptno
7 FROM dept
8 WHERE dname = 'RESEARCH')
9 START WITH mgr = 7566
10 CONNECT BY PRIOR empno = mgr
11 /
EMPNO MGR DEPTNO
7788 7566 20
7876 7788 20
7902 7566 20
800 7902 20
-- invalid:
SQL>
SQL> SELECT empno,
2 mgr,
3 deptno
4 FROM emp
5 START WITH mgr = 7566
6 CONNECT BY PRIOR empno = mgr
7 WHERE deptno IN
8 (SELECT deptno
9 FROM dept
10 WHERE dname = 'RESEARCH')
11 /
WHERE deptno IN
ERROR at line 7:
ORA-00933: SQL command not properly ended
-- valid:
SQL>
SQL> SELECT empno,
2 mgr,
3 deptno
4 FROM emp
5 START WITH mgr = 7566
6 AND deptno IN
7 (SELECT deptno
8 FROM dept
9 WHERE dname = 'RESEARCH')
10 CONNECT BY PRIOR empno = mgr
11 /
EMPNO MGR DEPTNO
7788 7566 20
7876 7788 20
7902 7566 20
800 7902 20
-- invalid:
SQL>
SQL> SELECT empno,
2 mgr,
3 deptno
4 FROM emp
5 START WITH mgr = 7566
6 CONNECT BY PRIOR empno = mgr
7 AND deptno IN
8 (SELECT deptno
9 FROM dept
10 WHERE dname = 'RESEARCH')
11 /
FROM emp
ERROR at line 4:
ORA-01473: cannot have subqueries in CONNECT BY clause -
Missing column value when logged on to windows with user id other then admi
I am using crystal report 10 with oracle 10g database. Application is is developed on vissual studio.net 2005 (vb.net). Reports are launched from vb.net application.
My report runs fine when I logon to windows as administrator and launch vb.net application. When I logeed on to windows with userid other then administrator my application works fine except one of the column value is missing a value in the report. When I launch my vb.net application my oracle userid is same. Only difference is windows userid. My application has no referance to windows userid. Why crystal report viewer is missing one column value when loged on to windows as user(xxxx)?CR 10.2 bundles with .NET 2005. If you do not see the CR assemblies of version 10.2.3600 in GAC, try to do a custom install of .net 2005, choosing just Crystal Reports. Note that Crystal Reports does not bundle with all versions of .NET (for example it does not ship with .NET Express - I believe...). Alternatively, you can upgrade to CR 2008 which is the latest sipping version of Crystal Reports. You can obtain a copy by calling sales at 866-681-3435, or go to this link:
www.businessobjects.com/product/catalog/crystalreports
An eval copy of CR 2008 can be downloaded from here:
http://www.businessobjects.com/forms/default.asp?id=701600000009BXP
Ludek -
Error ORA-01446 when updating a versioned table with SQLDeveloper 1.5.4
Hi,
I have been trying out Oracle Workspace Manager to test how versioned tables might work to our advantage. My basic testing process is:
1. Create a table
2. Add some data rows
3. Version enable the table
4. Create a workspace
5. Goto the created workspace
6. Update a row
7. Commit and I get the following error
UPDATE "COMSERV"."A_OWM_TEST" SET DESCRIPTION = 'ABCDEFGHIJzzzz' WHERE ROWID = 'AAAThNAAIAAAgwqAAY'
One error saving changes to table "COMSERV"."A_OWM_TEST":
Row 10: ORA-01446: cannot select ROWID from view with DISTINCT, GROUP BY, etc.
The same update works fine from SQLPlus so my question is Does SQL developer support table versioning or have I done something wrong is setting up my versioned tables?
Any suggestions greatly appreciated.
Thanks
Richard Wilkinsonhye...
is that any view referring to that table...
check the code on how u create that view...
for e.g.
CREATE OR REPLACE VIEW testview
(id, name)
AS
select * from testing;
this also will populate that ORA-01446 error.
just a suggestion cause i also have a similar problem on ORA-01446 and i resolve it by alter the view..
CREATE OR REPLACE VIEW testview
(id, name)
AS
select id, name from testing;
correct me if i'm worng...i'm just a newbie..
thank you... -
Hey Apple Support!
I am about to return my POS Apple products and all Apple products in my household / never buy one ever again! But first please help me out getting your junk to work until I can replace it all.
Running Windows 8.1 (latest updates), and randomly today, my iTunes 11 starts crashing when I plug in my iPhone 5 ios7.1. NOTE: I have made no changes to the iPhone or iTunes for a few months and they have been working together fine, this issue just popped out of the blue today. So, I upgrade to iTunes 12 thinking that will solve the issue. Other than giving me a terrible display and slower start-up time, iTunes 12 is a whole lot worse! Not only does plugging in a device crash it, but running uninstaller also crashes! Reinstall / repair crashes! Trying to edit preferences in iTunes crashes! (I AM NOT MAKING THIS UP ALL OF THESE CASES ARE OCCURRING) I can't get rid of your trash software! That's not so bad, since I never use iTunes for anything but syncing to my iPhone, EXCEPT I just had to buy a replacement iPhone 5S today because I was told that somehow after camping in the desert (i.e. no water) my phone got water damaged! And before that incident even happened my iPhone has almost always had issues with the screen mis-reading gestures which today caused me to delete a text conversation with someone and I opened a separate question about why after that happened my phone continues to delete new texts from this person, but no one has answered! If any specialist responds with the "iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch" then I'm heading straight to the AT&T store to return this brick I just bought.Any help on this? its really annoying.
-
Flash CS6 does not not create an .app file when I Output as application with runtime embedded
I am attempting to create an application with runtime embedded, but the process keeps failing without throwing an error. Specifically: in Air Settings, I select Output as: Application with runtime embedded. When I build it this way, Flash tells me that it's created Telepath Tactics - Steam.app...
...but no .app file ever actually appears in the folder:
This happens regardless of what I include in the Library Path, and regardless of the Default Linkage settings. (When I tell it to Output as: Windows installer, by contrast, the appropriate exe file appears without a problem.)
I'm using Flash Professional CS6 v. 12.0.0.481 on Windows 7, 64-bit.I should note that this only occurs on certain windows machines. I am still waiting to hear which ones.
I personally do not experience this so I have to rely on Client feedback.
On my machine it works fine without Flash installed. -
ORA-12560 when logging as SYSDBA in 11gR2 db installed in Windows 7
I have installed Oracle 11gR2 in Windows 7. I setup all listener and tnsname file and can login to the database like following:
sqlplus cisadm/cisadm@demo
However, it throws ORA-12560 error when loggin as sysdba as below:
sqlplus / as sysdba
I have read some previous post and already set ORACLE_SID=DEMO. But it still doesn't work.
I wonder if my 11gR2 was not installed properly as I also cannot use Administartion Assistant for Windows which throws "MMC could not create snap-in" error.This because of previously installed database.
I feel that you have un installed but you have not completely removed Oracle Instances.
After the deinstall from Oracle Installer, Oracle leaves some services still running and some folders which wont be deleted .
You have to manually delete these folders.
Or follow these steps and try.
1) First step is to stop all the services relevant to Oracle database 11g. In windows 7 navigate from Start->Control Panel->Administrative Tools->Services
2) Click on Oracle Service OracleServiceORACLE_SID,OracleDBConsoleOracle_SID,OracleOraDB11g_homeTNSListener and Click on Link stop. Also stop these services if they are enabled - OracleMTSRecoveryService, OracleJobSchedulerOracle_SID
3) Now its time to remove references from Registry. In Windows 7 search box type regedit. This opens the Registry Editor
4) Click on HKEY_LOCAL_MACHINE. Click on Software. Choose Oracle Folder. Delete it completely. Also Remove HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services and remove oracle relevant entries from there (All will have either Oracle or Ora prefix)
5) Remove the PATH variable from environment variables if set
6) Delete the database files manually from the local machine
In this process of deleting files I got an error which said windows process WmiPrvSE.exe process makes use of certain dlls such as oracell11.dll,oraldapclnt11.dll etc. I renamed the bin folder to bin_old. I restarted the system and it fixed the issue
Regards,
Tirumala Dixit. -
we are trying to export the Login Server Information using ssoexp.csh and we
are getting this error:
Extracting Login Server Data to transport tables...
begin
ERROR at line 1:
ORA-01400: cannot insert NULL into
("PORTAL30_SSO"."WWUTL_TRANSPORT_LOG_ENTRY$".
"SUBSCRIBER_ID")
ORA-06512: at "PORTAL30_SSO.WWUTL_NEW", line 28
ORA-06512: at "PORTAL30_SSO.WWUTL_API_SSOTRANSPORT", line 161
ORA-06512: at "PORTAL30_SSO.WWUTL_API_SSOTRANSPORT", line 227
ORA-06512: at "PORTAL30_SSO.WWUTL_API_SSOTRANSPORT", line 238
ORA-06512: at "PORTAL30_SSO.WWUTL_API_SSOTRANSPORT", line 778
ORA-01400: cannot insert NULL into
("PORTAL30_SSO"."WWUTL_TRANSPORT_LOG_ENTRY$".
"SUBSCRIBER_ID")
ORA-06512: at "PORTAL30_SSO.WWUTL_NEW", line 28
ORA-06512: at "PORTAL30_SSO.WWUTL_API_SSOTRANSPORT", line 161
ORA-06512: at "PORTAL30_SSO.WWUTL_API_SSOTRANSPORT", line 227
ORA-06512: at "PORTAL30_SSO.WWUTL_API_SSOTRANSPORT", line 238
ORA-06512: at "PORTAL30_SSO.WWUTL_API_SSOTRANSPORT", line 528
ORA-01400: cannot insert NULL into
("PORTAL30_SSO"."WWUTL_TRANSPORT_LOG_ENTRY$".
"SUBSCRIBER_ID")
ORA-06512: at line 2Burleson know:
http://www.dba-oracle.com/sf_ora_31603_object_string_of_type_string_not_found_in_schema_string_bc1.htm -
Ora-28509 and ora-28511 when attempting to join oracle with postgresql in query
I have attempted to run the following statement.
select a."uri", b.person_id from "sources"@postgresql a, ct_person_src_ref_store b where decoder(b.source_uri) = a."id";
This is the error I get.
ERROR at line 1:
ORA-28511: lost RPC connection to heterogeneous remote agent using
SID=ORA-28511: lost RPC connection to heterogeneous remote agent using
SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DAT
A=(SID=posgre133)))
ORA-28509: unable to establish a connection to non-Oracle system
ORA-02063: preceding line from POSTGRESQL
Process ID: 116908
Session ID: 5197 Serial number: 49491
I have a resulting trace file from having HS_FDS_TRACE_LEVEL = DEBUG. It's kind of long (490 lines). I'm hesitant to paste the whole log into this posting. Is there a certain part of the trace file that I can post that would assist in helping me determine the cause of the error?
ThanksThat works now ....
When we ask the Postgres driver which columns/data types are in that table it reports:
Entered hgopcda at 2014/04/16-20:59:52
Column:27(uri): dtype:-1 (LONGVARCHAR), prc/scl:8190/0, nullbl:1, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/04/16-20:59:52
Which then leads to:
SQL text from hgopars, id=1, len=32 ...
00: 53454C45 43542022 6964222C 22757269 [SELECT "id","uri]
10: 22204652 4F4D2022 736F7572 63657322 [" FROM "sources"]
Column:1(id): dtype:-5 (BIGINT), prc/scl:19/0, nullbl:0, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/04/16-21:05:15
Entered hgopcda at 2014/04/16-21:05:15
Column:2(uri): dtype:-1 (LONGVARCHAR), prc/scl:8190/0, nullbl:1, octet:8190, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/04/16-21:05:15
hgodscr, line 464: Printing hoada @ 0x1ab8820
MAX:2, ACTUAL:2, BRC:1, WHT=5 (SELECT_LIST)
hoadaMOD bit-values found (0x20:NEGATIVE_HOADADTY,0x200:TREAT_AS_CHAR)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
-5 BIGINT N 8 8 0/ 0 0 0 20 id
-1 LONGVARCHAR Y 0 0 0/ 0 0 0 220 uri
Exiting hgodscr, rc=0 at 2014/04/16-21:05:15
=> so far so good. The gateway exists from that routine and here it can't locate the database process anymore:
Exiting hgodscr, rc=0 at 2014/04/16-21:05:15
HS Agent received unexpected RPC disconnect
Network error 1004: NCR-01004: NCRS: Write error.
Could you please upload the alert.log details matching that timstamp?
- Klaus
Maybe you are looking for
-
QaaWS not returning data in Xcelsius
My dashboard Data is not displayed in Xcelsius or InfoView and have encountered the error as below: All of your system's 0 Concurrent Access Licenses are in use at this time or your system's license key has expired. Try again later or contact your ad
-
Tabular Connection - Blank Power view generation is taking time.
Hello Team, Got a question over the Power view report creation with the default settings. We are having two tabular model connection files (bism) which were created in the SharePoint. By using the Connection 1, It is taking around 6 seconds to have t
-
GUI: Implementing Previous-Button
Hello! I have several SubVI's which all take effect on the content of one cluster. Now I want to build a GUI which calls all the SubVI's in an determined order. Implementing the 'Next'-Button was no problem, but I had some troubles with the 'Previous
-
When I go to view my pictures in the picture library all of the pictures now have a green check mark in the lower left corner of the picture. What is causing that and how do I get rid of it??? This question was solved. View Solution.
-
Initial postion of image changed but now image does not move
hi can any one solve this problem please, i have been trying to change the initial position of my image when i run it 1st on java textpad...... i seem to have moved the initial position of the image by the following > public void paint(Graphics g) {