Apex 4.2 developer page not showing up after installing over 10g

Hi there,
So as luck would have it my Win XP OS crashed. Yes, its the office laptop and I cannot upgrade the OS for now. Anyhow, I got the whole machine re-imaged and installed 10g which had version 2.1 and everything was okay. I was earlier running apex 4.1.1. I could not find that setup on the oracle site so I downloaded apex 4.2 and ran the installation as per page
http://www.oracle.com/technetwork/developer-tools/apex/application-express/upgrade-apex-for-xe-154969.html
Everything went through properly except for step
5. Log back into SQL*Plus (as above) and load images:
SQL> @apxldimg.sql APEX_HOME
[Note: APEX_HOME is the directory you specified when unzipping the file. For example, with Windows 'C:\'.]
where it asked me to enter the directory and I entered C:\
This is what happened
SQL> @apxldimg.sql
PL/SQL procedure successfully completed.
Enter value for 1: C:\
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'C:\/apex/images'
Directory created.
^C
C:\apex>
I see a backslash and forward slash so I did a ctrl c . When I tried running the command again - @apxldimg.sql
it just would open the .sql file.
Not sure if this is the issue, but anyhow, after this, when I tried the "go to database page. It just shows a blank page. Any idea what needs to be done. I was happy with 4.1.1. Is that available anywhere? Maybe I can remove XE and do a fresh install with that.
Please advise.
thanks,
Ryan

Jeff,
I had a question on that. I am installing the software on my local machine. I have my apex files under C:\apex
Now when it asks for images directory, what should I enter,
C:
C:\
C:\apex
Reason being that as per the upgrade instructions it was given as 'C:\'
when I gave C:\ the new path showed up as C:\/apex/images.
also, do we need to give the directory in single quotes?
thanks,
Ryan

Similar Messages

  • OHS 11gR1 web-page not showing up after creation, registration of webgate

    Hello there,
    The OHS webpage on host:7777 is not showing up after I created, registered the webgate on oam 11g console. I copied the 2 artifacts into the ohs proxy server box in the webgate/config folder and restarted OHS instance but now, the ohs page won't show up. The opmn status says its alive but it doesnt show up in the browser.
    I have oam 11.1.2 installed with webgate 11.1.2 and ohs webtier 11.1.1.6.0. Am I missing any step? Do I need to create a authentication scheme before I check it? Please advise to the earliest convenience.
    Thanks!!

    Hi,
    You need to create authentication scheme. also create resourse for index.html page in OAM console and add it to protected resourse list. So when you will access OHS with 7777 port it will redirect to OAM SSO page, after successful login it will take you to the home page of OHS.
    mark, if this helps.
    Regards,
    Kishore

  • TS1424 Apple Mobile device does not show up after installing 10.0.7.21

    Receive message "Apple Device not started". Apple Device does not show up in Adminstrative Tools, Services. Windows 7 64bit, IOS6.0.1.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Mobile Device Support won't install normally.
    tt2

  • "Apple page not found" error after installing iOS 6 and trying to connect to wifi on iPad 2, how do I fix this?

    SO I just installed the new iOS6, and the wifi is working (posting on my iPad 2 right now). However it won't let me use safari, and every time I select my wifi network, it shows the full strength signal. But before I can do anything it loads a page in an attempt to connect to apple.com, that says "apple page not found." I can then navigate the apple website, but there is no address bar. I try using safari and it says I am not connected to a wireless network. I know this is a problem with iOS 6, so has anyone heard how to fix this? Or is anyone having this problem as well?

    Reading some older threads from 2012 and 2011 it appears the problem was present even then.  Part of the problem was due to people using multiple or different account id's on the various devices.  In my case, I only have one ID and it is the same on all devices yet the iPhone and iPad are still throwing the same error when I try turning on iTunes Match.  This is very frustrating . . . any help out there?  Thanks.

  • Rotate movie feature not showing up after installing quick time pro key

    I installed Quick Time 7 Player for Windows and then entered my Quick Time 7 Pro registration code. When I open a movie, recorded on a Sony Cyber Shot camera, movie editing features are not showing up. I need to rotate my movies 90 degrees and that was the sole purpose of purchasing the pro addition.
    After reading through pages of on-line support resourses and endless calls for technical support (and receiving none), I am still unable to figure out what's going on. Any ideas? Thank you for your help and insights in advance.

    Sounds like you are trying to edit muxed mpeg files, the editing of which QT PRO does not support. It also will not export the sound from such files. If they are mpeg-1 you can use Mpeg StreamClip to edit or export them. If they are mpeg-2 you would first need to buy the mpeg2playbackcomponent. With that component installed mpegstreamclip will also edit mpeg2 files.
    Message was edited by: Dick Napoli

  • Page not showing changes after refreshing

    For some reason after I made a few changes to my index page and uploaded with Dreamweaver MX, the changes won't show up in my browser(s). I don't think I did anything different, and I made changes on it just a few minutes ago. It's maddening to not be able to figure out something so simple.
    Can someone assist?

    Hi,
    pardon, but have you really done all these things, so that your browser is "convinced" to show your modification?
    - refresch browser
    - If set, delete the bookmark to the page or re-create the bookmark.
    - Quit browser
    - Empty the Temp Internet Files Internet Options
    - Clear History
    - Delete everything in general, where the browser remembers visited sites.
    - Restart
    - Clear Site visit
    - Clear Bookmark
    - Use another browser in order to test
    Hans-G.

  • Startup choices not showing up after install of earlier system on second drive

    I run Yosemite on my main hard drive and love it. However, I have Pro Tools 10 and it won't run on the latest OSX 10.10.2 (Yosemite). So I decided to install OSX 10.6.8 on one of 5 internal hard drives on my computer so I could use PT10. So the install was successful, but when I go to my startup disk to select my Yosemite drive to startup with it again, I get no choice to select it. The only choice I get in my Startup Disk selections is the 10.6.8 drive, and the 10.6.8 install disk which is in my DVD drive. All my other drives are visible when I have a window open in 10.6.8, including the Yosemite, but not visible in as a startup choice in the Startup Disk preference.
    The fact I see everything still in a window keeps me from freaking out.
    Can someone tell me how to make my other system drive visible as a choice? I don't know what I've done to make it not visible. I've done this kind of thing plenty of times over the years, using another drive for an earlier system, but this has never happened where the others don't show up as a choice to restart, and I'm a tad  worried.
    Thanks for your help!
    Michael

    Niel,
    Thanks so much for responding. It solved my problem! All is well.
    Two more questions, if you don't mind.
    1) Do I have to do that every time I want to get back to my Yosemite drive from 10.6.8? Can I change that where it shows up all the time?
    2) What do I do to have all the other drive icons show up on the desktop of the 10.6.8 drive? Even the main 10.6.8 drive isn't showing on the desktop. I remember this happening before, but forgot what I did to correct it.
    Again, many thanks!!!!

  • Firefox icon not showing up after installing and...

    I installed Firefox and there is no icon for it. I must manually enter "firefox" in the terminal. Also, when I run the java command, it says it cannot be found. I just installed java from the AUR package. Also, how do I make files without an extension run in the terminal or be sh by default?
    Last edited by kensclark16 (2013-11-01 05:09:06)

    kensclark16 wrote:I am double clicking the bash script and it is opening in gedit.
    Do something like this (we assume the file you want to execute is called "runme" in this example):
    chmod +x runme
    That will mark the file as "executable" as you say. Also, by default Gnome will prompt you on whether or not to run a script like this -- offering to execute it, execute it in a terminal or display its contents. I am not certain but I THINK that default process can be changed in the settings of Nautilus to do something by default -- like display in a text editor (gEdit) or run the script.
    YMMV on this as I am not at my box, to confirm any of this.

  • Maxtor 1 Touch - Not showing up after install of Snow Leopard

    My maxtor 1 touch external drive, connected via firewire worked fine on my mac running Leopard. Since installing Snow Leopard, it is not detected at all. I have done some research and found that the problem is that I had password protected the drive when I first set it up. The password was properly requested under Leopard. It seems, after discussions with Maxtor (Seagate) that the password protection is not compatable with Snow Leopard. They told me my option is to roll back to Leopard, take off the password, reinstall Snow Leopard. My reluctance to do this is the fact that to roll back to leopard I have to do an Erase & Install. Does anyone know of any other options that might work? Has anyone encountered this problem? Or maybe provide steps that would allow me to roll back to Leopard without doing "Erase and Install" process?

    Really? No Leopard backup to fall back onto while you investigate SL? Bad ju ju that. See these for better practices:
    http://www.macmaps.com/upgradefaq.html
    http://www.macmaps.com/backup.html
    http://www.thexlab.com/faqs/installswupdates.html
    http://www.thexlab.com/faqs/backuprecovery.html

  • Optical drive not showing up after installing SSD HD on satellite L75-B7150

    I just installed an ssd drive in my satellite L75-B7150. I had to unscrew the locking screw on the optical drive and slide it out. Now it wont show up in this PC windows 8.1. it does have power and the light led comes on a while with a disk in it but then goes out. It seems to be plugged in ok as far as the power.Could it be a driver problem? there doesn't seem to be any specific drivers for it.The drive probably isn't making contact with the sata connection. Does any one know a trick to putting them in. the optical drive pushes in after the case is snapped together so unsnapping the case wouldn't help me.

    make sure it is selected as the startup disc.    system preferences>startup disc> make sure new hdd is the default startup disc.

  • Illustrator not showing up after installing cs5.5 master collection student edition mac

    the questions in the title

    Some more info is needed and it wouldn't hurt if we saw install logs.
    Mylenium

  • OSX not showing up after installing Windows

    Title sums it up.
    I have installed Windows with bootcamp, worked perfectly fine. When I wanted to switch back, there was no option for the OSX in the start up menu, just the Windows disk. How should I proceed? How do I reinstall OSX without access to another Mac computer?

    Unless you have a backup you can use, you can't.
    You will need to completely erase the drive (so you must make a backup if you don't have one) and start over.

  • IWeb Main Page Not Showing

    I've researched to death and tried everything but can't fix this.
    Recently did a clean install on my iMac and since then iWeb won't work.
    I have :
    - Reinstalled from original disc then updated to latest version 3.0.4
    - Deleted the com.apple.iWeb.plist file and com.apple.iWeb Cache Folder, restarted, and tried opening again
    - I have removed my domain.sites2 file to try and open iWeb and initiate making a new site
    iWeb is fully loaded and operational - in Activity Monitor it does not have a red flag - shows as being operational. I can access iWeb's Preferences, open and close various Inspectors, but the main window is simply not visible.
    I am on Lion 10.7.2
    I had updated my website using iWeb while on Lion 10.7.1
    I have a small business and my website is outdated and will be losing me new customers at this point who will think I don't have the latest stock and information.
    Any help appreciated - naturally no need to reply if 'fixes' are as per other posts and noted as having been tried above.

    Where is the main page not showing?  In iWeb or online?
    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    For opening your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain or from  Toad's Cellar.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    It is hard to exactly understand what you have  done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
    Updating a Chart Copied from a Numbers Document
    If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
       Select the chart on the page and click the Refresh button that appears.
    Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
    I hope it has helped you.

  • How do I get the 'Welcome to Firefox' page that shows up after an update to quit showing up? It's been coming up when ever I start up Firefox for days.

    The ‘Welcome to Firefox’ page that shows up after an update is installed has been coming up when ever I start up Firefox since I did the last update to 18.0.1, several days ago. How do I get it to stop?

    The problem turned out to be an error on the prefs.js file where one or two of the parameters with the current version number were not properly updated, so the browser always thought I was opening it for the first time on a new version. I edited the version number in those parameters to agree with the version number in the Help/About dropdown and the problem went away. It has been a while now and I do not recall which were the faulty parameters, but here are the ones in my current prefs.js file that refer to the browser version (currently 21.0 for me):
    user_pref("browser.startup.homepage_override.mstone", "21.0");
    user_pref("extensions.enabledAddons", "%7Bd40f5e7b-d2cf-4856-b441-cc613eeffbe3%7D:1.68,%7B02450914-cdd9-410f-b1da-db004e18c671%7D:0.97.12c,%7BBBDA0591-3099-440a-AA10-41764D9DB4DB%7D:11.3.0.9%20-%205,%7B2D3F3651-74B9-4795-BDEC-6DA2F431CB62%7D:2013.4.1.2,%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:21.0");
    user_pref("extensions.lastAppVersion", "21.0");
    user_pref("extensions.lastPlatformVersion", "21.0");
    user_pref("gecko.mstone", "21.0");
    I have not encountered the same problem with recent version upgrades. Good luck!!

Maybe you are looking for