Api for creating perspectives - does it exist??

Hi
Does anyone know if there exists an api for creating perspectives?
Torstein

No, you need Vista SP2 or higher. About all you can do is add your iCloud email account using these settings: http://support.apple.com/kb/HT4864, then check your other iCloud data by going to icloud.com from your browser.

Similar Messages

Does Adobe provide a free API for creating PDF files

Does Adobe provide a free API (for Windows) for creating PDF files?   We are currently using
a basic, internally developed API for creating PDF files, but would like some additional
capabilities ... in particular the ability to add a watermark that appears when printing
but not when viewing PDF files on-line.
If this is not the right forum for this question, please let me know what forum would be
appropriate.
Thanks,
Mark

OK, with a little bit of searching on Adobe's web site, I found the answer to my question.   Yes, Adobe does offer
an API for creating/manipulating/reading PDF files: it's called the Adobe PDF Library SDK and it has to be
licensed. Version 9 is the latest.   The cost is decided on a case-by-case basis.    Here is the link:
http://www.adobe.com/devnet/pdf/library/
Mark

Error: Number range for object RESB does not exist

Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
     Message no. 61501
Diagnosis
     The system cannot create a document for an MRP element if no number
     range or interval has been maintained in Customizing of MRP or if t
     number range you have maintained is not allowed.
     Below is a list of MRP elements that are affected:
     Number range object MRP element
     PLAF                 planned order (operative oder simulative)
     EBAN                 purchase requisition
     RESB                 dependent requirements
     MDSM                 simulative dependent reqmts (long-term plannin
     MDTB                 MRP list
Procedure
     Check the number ranges in Customizing. If you do not have the necessa
     authorization, please get in touch with your systems administration.

Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object                             MRES/DREQ
No.                          From Number            To Number          Curr Number          Ext
01                           0000000001               8999999999           380                    blank
02                           9000000000               9500000000           blank                  checked
RB                          9500000001               9999999999           blank                  checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM

Number range for object MDTB does not exist - Message no. 61501

Hi All ,
I have done the necessary configurations in PP say
Order Type
Order Type Dependent Parameters
Scheduling parameters for planned & production order
Confirmation parameters
Availabilty check etc
and iam able to create planned & production order and confirma the production order.
I want to configure for MRP: -
Settings done are
Have activeted planning file entry for all plants.
When i run MRP system throws a error <b>Number range for object MDTB does not exist - Message no.61501 </b>
Is there anything to do with plant parameters OPPQ and Mrp Group OPPR.
I just tried plant parameters,standard 0001 is not available for copying.
Suggest me how to proceed to set MRP.
Shankar

Hi shankar
it is a good practice while creating the plant copying the plant from the standard plant so that all the standard table enteries will be copied for the plant as the standard plant is not there youcan think of copying from any other plant similar to your plant which has the required entry. else
in SE16N check the NRIV table for the Object MDTB. if enteris found then make the table entry with the help of abaper.
hope this helps
regards
SK

The bp id for org unit does not exist

Dear expert,
after transport the org structure from dev to qty system , we found the bp id for org unit does not exist in qty system.
in ppoma_crm, we can see there is a bp id assigned to the org unit. however, when use tcode 'bp' to check the bp id, the system can not fould a valid id.
what can we do to solve the issue?
will there any impact if we keep no bp id for the org unit?

Hi,
You can use the transaction CRM_OM_BP_INTEGRATE.
Select the Org unit and enter the org id in the input field and execute it.
Select the org unit from the result list and click on the button Start Repair. This will create a BP without errors for the respective org unit.
Regards,
PP

Number range for object BANF does not exist

Hi Guru's
I have been trying to convert the Planned orders to Purchase requisition and unfortunately the system consistantly giving me the error as reflected below despite changing the numbering range on the affectred documents. Please help.
Number range for object BANF does not exist
Message no. 61501
Diagnosis
The system cannot create a document for an MRP element if no number range or interval has been maintained in Customizing of MRP or if the number range you have maintained is not allowed.
Below is a list of MRP elements that are affected:
Number range object MRP element
PLAF planned order (operative oder simulative)
EBAN purchase requisition
RESB dependent requirements
MDSM simulative dependent reqmts (long-term planning)
MDTB MRP list

Hello,
You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
E.g for NB doc type number range number is 20
and in OMH7 number range number 20 has interval from- 2000000000 to 2099999999
same way
for RV doc type number range number is 21
and in OMH7 number range number 21 has interval from- 2100000000 to 2199999999
Regards,
Shailesh

Hierarchy for material types does not exist

Hi,
I am doing an intial configuration in SRM 7.0 we have actvated extended classic and PPS activated.
In the first level of configuration ai heve set up the logical systems and the system landscape.
when i am in R3AS
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
the above objects wre green when i executed
For the object MATERIAL
I am getting an error
Hierarchy for material types does not exist
Message no. COM_PRODUCT_API000
Diagnosis
Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).
Procedure
Check whether the ERP system material types have been imported successfully and exist as categories.
Proceed
If necessary, import the Customizing object DNL_CUST_PROD1.
Kindly guide me

Hi,
It looks you have not configured the middleware basic settings. Queue should be registered in SMQR transaction.
Please follow the configuration guides in SAP Solution Manager or offline downloaded version in SAP Service Marketplace.
http://service.sap.com/srm-inst
Regards,
Masa

I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

Hi vindog60,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you get an installation error with iTunes on your Windows PC, please follow the steps in the article linked to below.
Issues installing iTunes for Windows - Apple Support
Cheers,
Alex H.

Error "Account assignment 00 for purchase document does not exist " when u

Hai,
I am encountering the following problem when posting a PO based Invoice using BAPI_INCOMINGINVOICE_CREATE.
The error says " account assignment 00 for purchasing document does not exist".
The scenario is very simple. I need to raise an Invoice against a PO. the PO has a single line item of quantity 10 net price 10. Tax code is U2 ( 7% tax).
I am passing the following at header level.
Invoice_indicator ( as 'X'),company code,doc date , posting date, gross amount (107, currency USD, calc tax indicator as 'X'.
At line item i am passing Invoice document item 000001, po number , po item number, tax code(U2) item amount (100),
Does this error has got any thing to relate configuration matters?
Regards,
Upender

Hi Upender,
In some cases, depending on the type of PO / Posting,
you might have to populate the accounting data itab and pass in the BAPI parameter.
you can select the accounting data from EKKN for the PO.
Again it depends on the PO category, wether you need to populate Qty & Unit in accounting data.
Further, the accounting data should be exactly the same as there in EKKN ( all the fields except Qty & Unit ).
Thanks,
Ram

HT1688 why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore.

why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore. i can reset password because i doent know what the old one was

Hi lgmmo,
I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
A quick Chat session should get you fixed up.
Please let us know if you have additional questions.
Best,
Sara

Error: Bank N.A. for country IN does not exist"

Hello Gurus,
When i am monitering Bdoc messages in Tcode:SMW01 ,there is an error message as"Bank N.A. for country IN does not exist"
So please help me to solve this problem.
Thnks in adv,
Divya.

Hello Gregor ,
I didn't do Initial Download of the Customizing DNL_CUST_BNKA in Transaction R3AS.
Regards,
divya

Stock for required data does not exist during repack of product

Hello,
I have the given situation, during the packing of a product (which is unpacked) in the Work Center I get the following error message:
"Stock for required data does not exist
Message no. /SCWM/L3104"
After a debugging session we have found the cause as being the field FLGAVQ (Indicator: Handling Unit Contains an Available Quantity) in the structure /SCWM/S_HUHDR_INT. My question is if somebody knows from where this mark comes and if you stumbled on the same problem and if so how did you manage?
All the best,
Claudiu Maxim

Hello Sridhar,
Thanks for the response, the packing operation in our case is done in the SCM EWM environment in the specific Work Center. The transaction with which we pack is /SCWM/PACK - Packing - General. Do you have a solution for this problem with regards to the EWM environment?
All the best,
Claudiu Maxim

The file required for contribute compatibility does not exist on the server

Hi, when connecting to a server in Dreamweaver that is set up
for Contribute I keep getting this message when putting files:
quote:
The file required for contribute compatibility does not exist
on the server. Would you like to turn off Contribute compatibility?
I see the post from jonbradley below, but the solution
suggested doesn't help me:
Does anyone have any idea what this means and how to stop it
from displaying?
Thanks in anticipation...
Simon

Did you search the forum on compatibility?
http://www.adobe.com/cfusion/webforums/forum/searchresults.cfm?requesttimeout=500&cate gory=290&forumid=55&FTVAR_KEYWORD1FRM=compatibility&FTVAR_SEARCHWHATFRM=c& FTVAR_RESULTTYPE=topics&FTVAR_AUTHORFRM=&FTVAR_TABLECHOICEFRM=current&FTVAR_CA TEGORYIDFRM=290&Selection=false&FTVAR_DATESELFRM=Select&FTVAR_STARTDATEFRM=&am p;FTVAR_ENDDATEFRM=&cal_d1=0&cal_d2=0

Is it a third party API for creating table in J2ME?

I am a newbie to J2ME and i would like to know that whther is there any third party API for creating table in J2ME beside using Canvas to draw the table? Please help...

its not the "L shape" that holds it better rather the higher GAUSS rating on the older connector.
Apple redesigned the NEW magsafe to be weaker AND of a diff. design with lower neodymium magnetic gauss rating for a reason
people at coffee shops etc were getting their macbooks yanked to the ground when someone tripped over the cord.
The new neodymium is a N35 gauss and the older Lshape was N40 or N45 gauss (too tight)
I know what youre talking about, but Apple redesigned it that way for several good reasons, despite it "coming out easier" on the bed for which ,
as Apple Inc. states, it is "not intended to be used" (nor in laps, couches...etc.)

API error: Element link does not exist for the duration of the entry

I am trying to create an element using the API_PAY_ELEMENT_ENTRY.CREATE_ELEMENT_ENTRY API
While I am able to create many elements for years this way, for one particular non-recurring element I get the following error
ORA-20001: Element link does not exist for the duration of the entry
Cause: The link has been purged or date effectively deleted.
Action: Check the effective start and end dates on the link definitions for this element.
I have checked evertything and the Link is defined far before my element entry starts and with no end date. The assignment I want to attach this element entry is perfectly eligible.
The weirdest is that I am able to create this element entry with the values I want and the dates I want through standard User interface...
Any idea?
Message was edited by:
briard

Here are the parameters I use in my call.
DECLARE
L_EFFECTIVE_START_DATE DATE;
L_EFFECTIVE_END_DATE DATE;
L_ELEMENT_ENTRY_ID NUMBER;
L_OBJECT_VERSION_NUMBER NUMBER;
L_WARNING BOOLEAN;
BEGIN
APPS.PAY_ELEMENT_ENTRY_API.CREATE_ELEMENT_ENTRY(
P_EFFECTIVE_DATE => TO_DATE('01-JUL-2008','DD-MON-YYYY'),
P_BUSINESS_GROUP_ID => 1,
P_ASSIGNMENT_ID => 122147
P_ELEMENT_LINK_ID => 233,
P_ENTRY_TYPE => 'E',
P_INPUT_VALUE_ID1 => 313,
P_ENTRY_VALUE1 => 'T',
P_INPUT_VALUE_ID2 => 314,
P_ENTRY_VALUE2 => '5',
-- out params
P_EFFECTIVE_START_DATE => L_EFFECTIVE_START_DATE,
P_EFFECTIVE_END_DATE => L_EFFECTIVE_END_DATE,
P_ELEMENT_ENTRY_ID => L_ELEMENT_ENTRY_ID,
P_OBJECT_VERSION_NUMBER => L_OBJECT_VERSION_NUMBER,
P_CREATE_WARNING => L_WARNING);
END;
François

Api for creating perspectives - does it exist??

Similar Messages

Maybe you are looking for