APO application 2 (PPDS) in RRP3 view

Folks
Does a receipt/ requirement element with Category group AU/AV which will have the APO application field   ( last column in RRP3 view) entry as 2 (PPDS), be displayed in standard SNP pallning books ?
I had included these categories(AU/AV) in one of the existing category groups and assigned it to the one of the intended Planning area key figures and had observed that these receipt/ requirement element weren't visible in the SNP data view KF.
Any way to resolve this issue ?
Thanks

In RRP3, view I had checked that the R/3 Object type is P(Project Order) and Category is 'AU' and Category Type is '2' (Requirement) and both source and destination fields are populated. Requirement qty is 50
So now that the project order requirement (which is Reservation, in this case) exists in RRP3 view, what I am trying to accomplish is, to view this order reservation requirement in the SNP Planning book which I had created.As, standard 9ANSP94 planning area doesn't have any KF for reservation, I had created a new PA and had created a KF, with 000 semantics, to accomodate this order reservation requirement and further assigned this KF to this Category AU.
Now in the data view for this PA, I was expecting to see the Requirement qty of 50 but couldn't see it.
My question is as the Requirement already exists in the LC, shouldn't this be displayed in SNP planning books?
Hope I am clear and would appreciate if any one can rovide their insights and experiences on how to resolve this issue.
Thanks

Similar Messages

  • RRP3 View

    Hi,
    Can any one please tell me what does the SAP APO APPLICATION field value of "0" signify.
    This field can be seen in RRP3 view. "0" means INITIAL.
    Thanks,
    SS

    Hi SS, 
    It's actually not simple to comment for 0.
    I see that it's there for CIFed Sales Orders, deliveries, stock & for forecast generated from DP.
    I can only make a guess that it's for categories which won't get created in APO as a result of SNP or PPDS.
    Thanks - Pawan

  • Forecast consumption situation not shown in Forecast tab-RRP3 View

    Hi,
    I have released Forecast(FA) from DP to SNP.I am able to see the forecasts in Product view Elements tab.But I am not able to see any Forecast consumption details and overview in Forecast tab of Product view.It is showing if i create forecast manually in RRP3 view itself.How to bring the forecast data in forecast tab of RRP3 view.
    Thanks&Regards
    Venkadesh

    Hi Venkadesh,
    This is a known issue and can be solved by SAP  Note 743646 - Incorrect consumption situation in product view.
    Using a report, you can adjust the consumption situation in the element view so that it is the same as the consumption situation in the forecasting view.  To do this, call transaction SE38 and create the report Z_CSP_DELTA_FCST with the title "Check of the consumption situation"; Type: Executable program; Status: Test program; Application: Materials Management.  Delete the first line "REPORT..." from the new report  then use the cut and paste functions to add the program to the correction instructions.
    Try this out and let me kow if this solves your purpose.
    Many thanks,
    Amit Sen

  • CIF - Integration model name and APO application

    Hi Experts,
    In the CFM1 Transaction, there are 3 mandatory inputs are Model name, Logical system and APO application.
    Logical systems are customized in CFC1 transaction. I couldn't trace the model name and application creation.
    What is the transaction to customize/Create the new Model name and APO application.
    Hope this is very simple question to you and expect your soon.
    Thanks,
    Saravanan V

    Hi Somnath,
    Thanks for ur reply.
    First I saved the selection as variant. But it was not updated in the IM table.
    Then I tried to generate the model and now I can see the details when I use the F4 help.
    So, to create a integration model need to generate the variant once.
    Thanks for the confirmation.
    Thanks,
    Saravanan V

  • APO Application

    Dear Expert ,
    Could You Please help me how to Create APO Application in Transaction CFM1 Ceate Integration Model ?
    Regards
    Rami

    Hello Rami,
    The APO Application in the Int.Model is just an name identifier for bundling data in one package.For example.
    (As Senthil explained), if you want to sent Materials,Plants, PDS,Resources to APO system. And if you wish to have 3 different APO applications for this,
    for trasnferring the products, you may enter in the CFM1
    Model Name ABCD
    Logical System ABDCLNT001
    APO Application ABC_PRODUCTS  (please note that, this APO application field is a free text field, and you can enter any new values here, you need not create this APO application in another transaction).
    And for PDSs -->
    Model Name ABCD
    Logical System ABDCLNT001
    APO Application ABC_PDS .
    The basic advantage of having different APO Applications within  a IModel is that, if you wish to retransfer the data to APO, you may just re-trensfer the data contained in this APO Applciation rather than sending the entire data contained in the IModel.
    So again, The APO Application is not created / defined in a different transaction. this is a free character field in the IModel creation.
    Thanks,
    Mahesh

  • Javax.faces.application.ViewExpiredException: viewId:/greeting.jsp - View /

    I'm new to JSF and I am trying to learn it, I tried the first example that comes with JavaEE Tutorial:
    I was successfully able to run the guessNumber application on Tomcat 6.x
    I left Tomcat and the app idel for a while, when I returned I tried to refresh the page and got this exception , instead of the usual page:
    javax.faces.application.ViewExpiredException: viewId:/greeting.jsp - View /greeting.jsp could not be restored.
         com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:185)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
         com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:117)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:244)Then I did an ant clean build on the application and shutdown tomcat and restarted it, to try this example again, but the above error reoccurs.
    Has anyone solved this exception or know anything about what coudl be the cause?
    I've already tried Google, but couldn't find a response from anyone that solved it yet.
    Many thanks for your help.

    I just solved this problem.
    Even though I had shut-down Tomcat, I was still using the same browser instance.
    When I closed the old instance and used a new browser instance of Firefox - it displayed normally.
    However, I have another problem ( a different one) - when I try to open the app in Internet Explorer 7, instead of rendering the JSP page , IE asks me to download it.
    And the file type has changed from JSP to jsp_auto_file , but IE is was rendering this page properly - I don't know what's causing it to not render it now.
    Also IE shows a default pop-up blocker when I try to load the above example.
    Message was edited by:
    appy77

  • Data available in RRP3 view but not coming in SNP planning book

    Hi All,
    I am facing an issue in SNP book. I can see forecasts in RRP3 view. But when I load the same data in SNP planning book, the forecasts are not coming there (forecast KF)
    I ran LC Cons check, PA cons check, OM17, but still the same result.
    Any pointer would be highly valuable.
    Regards,
    Manotosh Bhattacharya

    Hi
    If you look at the standard Forecast KF 9ADFCST in your planning area, it is usually assigned the Category Group of DF1. This category group only contains the category FA for forecast. If you create Forecast in /SAPAPO/RRP3, this will create Additional Forecast or category group FC. Therefore any forecast generated this way will not appear against the standard planning book KF.
    So you have two choices, if your forecast is only FC category then use the KF 9AAFCST Forecast (Addittional) in your data view or create a new Category Group with both FA and FC assigned to it and then assign this Categotry Group to 9ADFCST in your planning area.
    Regards
    Ian

  • Is there an application that will open and view MS publisher?

    Is there an application that will open and View MS Publisher files?

    Afraid not. You can run Windows on your Mac then run Publisher in Windows. You can find out then if Publisher can export in a "standardized" format other applications might import.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Problem in order conversion in ppds in receipt view.

    Hi,  Guru's,
    I have a problem, that we have implemented new plant & product in our existing APO in roll out project for PPDS & GATP settings while converting order in receipt view in /n/sapapo/rrp3 or /n/sapapo/rrp2, order is not getting converted nor giving any log in R/3, in CFG1, while seen that plan order is having resources & operation activity.
    Pls suggest.

    Hi
    Please check the following
    1) Check whether in customisation for PPDS, the order conversion is defined
    2) Check number ranges is defined for all orders both in R/3 and in PPDS
    3) In product view, try entering manual order conversion by clicking the
    conversion indicator and find out what is the error it is showing
    4) Is the Source of supply is defined properly
    5) Check the PPM (both PPDS and SNP) whether maintained properly (also
    carry out consistenc check for PPM in transaction /sapapo/scc03)
    Regards
    R. Senthil Mareeswaran.

  • Forecast Consumption in APO- No Data Available in Product View

    Hi Experts
    I facing some problem in Forecast Consumption in APO. The APO system is connected to a R/3 system. So data relevant for Forecast consumption comes from R/3.
    The allocation indicator in the requirement class assigned to the strategy maintained in the product master is set as " no consumption with customer requirement". and the same is transfered to APO.
    I have the changed the settings in APO and here are the setting maintained in APO to enable Forecast Consumption.
    Product Master Setting:
    a) Consumption Mode: 2 ( forward and backward)
    b) Consumption Period: ( 30 days both backward and forward)
    c) Strategy Group : 20 and assignment mode is set to "Assign customer requirement to planning with final assembly" and category group has sales order - BM
    d) The check mode setting in the ATP tab is set to "Assign customer requirement to planning with final assembly"
    I have a forecast for today's date and a sales order transferred from R/3 for the same date. But I do not see any data in the Forecast tab in the product view ( /sapapo/rrp3 Tcode)
    Please let me know if I am missing any setting in APO. Or the SAles order carries the strategy information from R/3 and influencing the consumption any way.

    Hi,
    What is your Forecast & Sales order quantity? If these are same then sales order consumed forecast, so you can not able to see in the rrp3.
      Second thing try to increse the forecast quantity than sales order quantity & then check it.
    Regards
    Sujay

  • How to activate Events Calendar Sample Application's Weekly and Daily View?

    Does anyone know how to activate the Weekly and Daily View for the sample calendar application called "Events?" I am trying to generate, or incorporate, a calendar application based upon the sample application provided by Oracle. I have installed the sample application but I am unable to view the calendar in daily or weekly formats. Any assistance would be appreciated. Thanks in-advance.

    Hi,
    If the calendar was set up to only use the Monthly view, then you will be missing a number of items on your page.
    The simplest thing to do would be to create a new calendar page in your copy of your sample app and then identify those items that are missing from your original page. These should be Monthly/Weekly/Daily buttons, Adjust Calendar Date - Monthly/Weekly/Daily processes and a hidden Pnn_CALENDAR_TYPE page item that holds the currently displayed type.
    Andy

  • Manually adding a Extra button in the application tool bar of the view cluster.

    hello Colleagues ,
    I have created a couple of maintenance view , and with this two maintenance view i have created a view cluster using the transaction SE54.
    Now, there is default Application toolbar gets generated when a view cluster is created. (screenshot attached.)
    Now i have a requirement where i can add another button (syntax Check button in the screenshot 2) in the same view cluster. (screenshot attached.)
    Want to know the feasibility of this requirement.
    Thanks in advance
    Shavneet Singh

    Hello,
    Not sure of your exact reqt
    But got some sample code to create a button on the toolbar which once clicked gives a new popup window with additional parameters
    TABLES:SSCRFIELDS.
    **Create the Additional Selection screen to input filename
    SELECTION-SCREEN: BEGIN OF SCREEN 10.
    PARAMETERS: P_FILE TYPE RLGRAP-FILENAME.
    SELECTION-SCREEN: END OF SCREEN 10.
    **Create Application Toolbar Button on the Standard selection Screen
    SELECTION-SCREEN FUNCTION KEY 1. "Its fcode will be FC01
    PARAMETERS : P_WERKS TYPE MARC-WERKS.
    INITIALIZATION.
      SSCRFIELDS-FUNCTXT_01 = 'Enter File'. "Assign the Text to the Button
    AT SELECTION-SCREEN.
      CASE SSCRFIELDS-UCOMM. "Check the Fcode
        WHEN 'FC01'.
          CALL SELECTION-SCREEN 10 STARTING AT 5 8 ENDING AT 85 20.
      ENDCASE.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
      CALL FUNCTION 'F4_FILENAME' "Local file browser
      EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME = 'P_FILE'
      IMPORTING
      FILE_NAME = P_FILE.
    START-OF-SELECTION.
    ***Your list processing.

  • Path of the application which is entered in Viewer option

    Hi,
    What is the path of the application that is entered in the viewer options. I basically want to see the applications that are available for the MIME types. Also is there a way by which we can add new applications.
    Ex: Lets say I want to open the CP output directly in Notepad. Is there a way to achieve this. If notepad application is not there already is there a way to add the custom applications. Kindly let me know.
    Kindly apologise if this is not the correct forum.
    Thanks

    Hi,
    If you are referring to Oracle Apps concurrent request output viewer, check on the metalink note below:
    Note 184375.1 - How to Setup The Report Output to Different Viewer Types in Oracle Applications 11i
    Hope it helps.. E-Business Suite-> AOL forum could provide additional info.
    Regards,
    Rownald

  • APO SNP Planning Book Show Product View alternative UoM

    Hi,
    I have a base UoM of BTL and an alternative UoM of CAS.
    I can change/save in my users settings the in transactions /SAPAPO/RRP3 (Product View) and /SAPAPO/SDP94 (Planning Book) to show the alternative UoM CAS as default.
    The problem I have is when I enter the Planning Book, load a product, right click on the product (in Selected Objects), select Show Product View and then look at the stock tab, this always shows as the base UoM BTL.  Can this be saved to show the alternative UoM CAS?

    Hi Linda,
    Try changing you user settings for a product in RRP3 Screen.
    Page Menu --> Settings -->General Tab -->General Panel -->enter AUOM value (CAS in your case).
    Note - The conversion only takes place for the products, for which the alternative unit of measure entered is also entered as the alternative unit of measure in the product master, or for the products, for which the base unit of measure has the same dimension as the alternative unit of measure.
    Caution: Test it , how its affecting for other products which doesnt have CAS as AUOM.
    All products which have BUOM as BTL will be changed to CAS when AUOM is maintained for them in product master.
    Thanks
    Vinoth

  • How to call FPM application from a WD ABAP view

    Hi
    My requirement is to navigate to an FPM application on click of a button in a WD component. And along with the navigation I need to pass parameters (internal table) along with it.
    Can anyone suggest ways to achieve this. And also how to get the parameter values in FPM application.
    Regards
    Prashant

    Dear Prashant
    Check this:
    [Passing Data to Webdynpro from normal module pool screen;
    Kind Regards
    /Ricardo Quintas

Maybe you are looking for

  • How buy Adobe Presenter 9.0.2

    Is there a way to buy Adobe Presenter 9.0.2 and not Adobe Presenter 10? Thanks in advance Luca

  • Alternative for OAAD?

    Hi Guys, Since OAAD transaction has disadvantage of suitable for single photo upload at a time,what could be an alternative for that? Warm Regards, Mohandoss P.

  • User specific default setting

    Hi Guru's, I have one ALV z-report. I have created two layout which is user specific. At the time of selection of layout system is allowing me only default setting and the field of user specific is showing gray. What will be the problem? Can anybody

  • Reservation budget check

    Dear Gurus, We have a criteria here where we are creating a reservation for material for consumption for PM Order, we need to check the budget for each reservation. As I am seeing in our system the cost elements are not being copied to our automatica

  • BW case studies for me too

    Hi everyone,           It would be great of you people if some could send the BW case studies you people have. Thanks in advance. Sekhar