APO Offset time integration with R3

Hi,
When I put an offset in the last operation of the PPM
this creates an earlier availability date for the component for planning.
However this date gets transferred to R3 as the basic finish date on
the planned order.
This is incorrect - it should be just the available planning date
on the planned order.
How do I get R3 to reflect the correct dates ???
Thanks,
Tony

Well, you need to know what is real and what is drift, and that depends on the data. Is the frequency of the signal constant and known?
If the wavelenght is constant, you can simply subtract the average value if you process exact multiples of the wavelength each time.
How does the real data look like? Is it similar to the simulated data in your example?
Why is there a while loop in the signal generator?
Why do you use the pt-by-pt integration if you process entire segments? The plain integral could do the same without any loops.
Why is there a wait in the toplevel loop, even though the loop rate should be determined by the signal timing?
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Cross co. code controlling area - CO Real time integration with FI

    Hi all of you,
    We are in to New GL, and implementing one controlling area for all the company codes (cross company code cost accounting) with group currency  "30". And my client requires the CO - FI Real time integration to take the segment reporting / profit center (new) FI reporting.
    My basic doubt is, when we are implementing one CO area, we taking all the company codes as cost center groupings and creating the overhead cost centers. When doing Repost CO line items in CO, how system arrives the company code since we are not referring the FI document or Company code, how system will create the FI document in the company code.
    Do we have any separate transaction to do the repost CO line items to hit the CO - FI real time integration?
    Please give me your valuable suggestions to use the CO-FI real time integration with cross controlling area assigned to multiple company codes.
    Thanks & Regards
    Ramki

    Thanks for your valuable reply Mr. Christian.
    So you mean to say that, when we are maintaining the cost center groupings (per company code), same will be maintained for profit center and will be assigned to the individual company codes, right.
    In CO - FI real time integration , I need to select the objects - company code and segment. Whenever any repost happened in the CO module, system will create one FI document referring to the real time objects. We have more than 12 company codes located in different countries. In this way, system is fulfilling the cross company code postings in CO and will generate the FI documents, right.
    Please give me your valuable suggestion and when I am looking the note in Market place (91055), it is showing the CAD Interface.
    Regards
    Ramki
    Edited by: Ramki on Feb 10, 2010 5:29 PM

  • FI CO Integation: Document type for real-time integration with FI not there

    Dear Gurus,
    This is the error message that I got and I am looking for a solution could anyone help me please.
    I was doing simultaneous costing and doing Product Cost Collector reports.[KKBC_PKO]
    This is IDES 6.00 ehancement package 4,
    How do I define a document type for real-time integration with FI?
    Message no. FAGL_COFI003
    "Diagnosis: For CO documents to be transferred into Financial Accounting in company code 1000, -the system requires a document type".
    How do I go about with this, need steps to resolve this please
    Thank you
    Saleem

    Hi,
    1. Check which variant is assigned to your company code '1000' using this IMG path
    IMG->Financial Acctg (New)->Financial actg global settings (New) ->Real-Time integration of Controlling with Financial Actg ->Assign variants for Real-time Integration to Company codes.
    2. Check if document type is assigned to the variant assigned to your Company code in this path:
    IMG->Financial Acctg (New)->Financial actg global settings (New) ->Real-Time integration of Controlling with Financial Actg -> Define Variants for Real-Time Integration.
    Hope this helps.

  • New General Ledger - Real Time Integration CO-FI

    Running Real Time Integration with Account Substitution.
    Works well when using a constant for RCL_ICCF-ACCOUNT.
    Does not work when calling an exit to substitue a value for the same field.
    Any clue ? Thx.
    Edited by: Alvaro Tejada Galindo on Feb 26, 2008 2:06 PM

    Declaration of table RCL_ICCF has to be global and not ocal.

  • SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time

    we have SSRS 2012 report integrated with SharePoint 2013  , when we click on any toggle item after some idle time of 60 secs and try again to expand
    another toggle item then  complete report is getting refreshed and  if we are in child report it is redirecting to parent report. . we didn’t set any refreshing property at report level. I hope there will be some idle time setting at sharepoint site
    level.
    what we observed.
    1. there is no problem when we expand toggle items without any idle time.
    2. when we open the report and expand few toggles and keep idle for 60 seconds and try
    again to expand another toggle item then  complete report is getting refreshed (all toggle items are collapsing).
    3. If you keep idle for 60 minutes and if you didn’t do any action like expanding toggle
    items it is not refreshing.
    why it is happening and how to stop that complete refresh.
    Surendra Thota

    Hi Surendra,
    I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
    I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
    Please reference to the setting below to don't limit the timeout values if you got the report reloading:
    Point to a report in the library.
    Click the down arrow, and select Manage processing options.
    In Processing Time-out, select Do not time out report processing or
    Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
    If you got the session timeout that refresh the page, please reference to the setting in below article:
    http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
    Details information in the article below about the timeout setting for your reference:
    Set Processing Options (Reporting Services in SharePoint Integrated Mode)
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • New GL - Real time integration of controlling with financial accounting

    Hi,
    What are the impacts of activating new GL in already existing system. I need to use the real time integration of CO to FI functionality in new GL only. Can i activate new GL for this function only?
    Please advise
    thanks

    Hi
    Yes, by activating New GL you would have real time integration of FI with CO and you dont need reconciliation ledger as available before.
    More over at the document level itself the profit centers are written to the balance sheets accounts which was earlier done in the period end activities to transfer the profit centers to debtors and creditors etc., which is known as "Document Splitting".
    You also need assign the various GL accounts and sceaniors in Controllingwhich needs to activated with Document splitting.
    Regards,
    Suraj

  • Real time Integration between Oracle i-Procurement with MUMPS based System

    Folks,
    Has anybody worked on integrating Oracle Applications with any Legacy System? I'm interested in discussing real time integration between Oracle i-Procurement and Legacy System. Can 9iAS Advanced Queue be used to accomplish this?
    If anybody has any information on this topic please reply back or email me at [email protected]
    Regards,
    J Ali

    Yes, we have experience with the product Oracle9iAS InterConnect. Adapters are provided to integrate with iProcurement and legacy systems. If your legacy system is non-standard either partners might already have adapters or you can use the adapter development kit to build your own specialized adapter. Check out: http://otn.oracle.com/products/integration/index.html
    and I would suggest to contact your Oracle account manager to get a detailed product demonstration and references.

  • Document on Positive Time Management & Integration with payroll

    Hi,
    Can any one suggest me any link from where I will get the IMG steps of Positive time management implemetation, time evaluation, time wagetype detail as well as the steps of integration with payroll..
    Thanks in advance.
    Ajay

    Hi Chandrashekar,
    Can you please advise how actually the transfer of clock times from time recording terminals to SAP R/3 will work?
    I read from help.sap.com that there is a SAP certified CC1 interface (BAPI based) which can be used for this purpose. However, in such a case, the time recording terminals should be SAP CC1 certified.
    If the time recording terminals are not SAP CC1 certified, then what is the method to be used? Will we write a custom BDC program in this scenario and what all should be considered in functional specification of such a BDC program.
    Please advise.
    Thanks and warm regards,
    Vianshu

  • SAP Travel Management Integration with Time Management

    Hello Gurus,
    Need some assistance with Travel integration with Time Management.
    Scenario.
    Punch in Punch out system at the client so when the employee is traveling or when he enters the Trip Request, after approval the attendance should be counted.
    Is there a config step for the same or a BADI needs to be implemented in this scenario ?
    Regards,
    BLITZZ

    A direct update of time infotypes is not possible. You can however switch on the integration in view V_T702N_A. With add. user parameter START_CATS = X you have the possibility to jump to CAT2 to record the time. For the update of the infotypes you have to follow the subsequent steps in time management.

  • Integration of Time Sheet with FI

    Hi Gurus,
    Please tell me how accounting entry gets generated after entering the time sheet?
    And also, from where system will pick the hourly rate?
    Please revert back asap.
    Thank you

    Hello
    PS integration with FI would be with the status of wbs elements,  egyou cant invoice till the status is teco. Your AP person may get an error and you will  have to co ordinate with PS team. You should understand the status of  wbs elements.
    Created, Released, Teco.
    Good to know all jargon of PS. you would invoice and enter a wbs element as a cost element. You may have to settle employee costs to a network they worked on.
    Thats all i can think of now.
    Plz assign points if helpfull

  • TIM TAM Integration with SAP - RBAC

    Hi - Would like to know if anyone has integrated TIM TAM with SAP EP to achieve RBAC? Please forward any information which could assist in this process. Also I need information on the SAP roles and how would these map to roles in TIM TAM

    The latest TAM integration for PeopleSoft can be found here:
    http://catalog.lotus.com/wps/portal/topal/details?catalog.label=1TW10AM26

  • Time device integration with SAP TM

    Hi,
    Can anyone guide me to integrate a hand punching time device with SAP Time management such that the time events can be recorded on batch processing from the device and validate it in SAP and generate the reports. We are working with SAP 4.7 version.
    Would really appreciate some tips.

    Hi,
    First of all check if there certified interface between your time recording system (that collects data from time devise) and SAP. If so, then use this interface.
    Otherwise you have to develop interface.
    1. Create extract program from time recording system.
    The extract file from time recording system should contain employee ID, time event and time.
    - Employee ID corresponds to Time recording ID in IT 0050 in SAP
    - Time event corresponds to Time event type in IT 2011 in SAP
    - Time corresponds to Time field in IT 2011.
    2. Then create batch input utility that will update IT 2011 on regular basis.
    Cheers

  • Session keep Alive when EBS is integrated with OIF acting as SP

    We have an E-Business Suite R12(12.1.3) Application which is integrated with Oracle Access Manager 11.1.1.5. For authentication the Oracle Access Manager delegates the authentication request to Oracle Identity Federation acting as a Service Provider (SP). There is a home-grown SSO which acts as the Identity provider by Federating it with OIF using SAML 2.0 protocol.
    The integration is successful and EBS is able to authenticate using this third party SSO.
    Now there are multiple applications which are integrated with this third party SSO and the user can access any of these applications including EBS.
    Considering a scenario where a user is using EBS Application say for more than 30 mins. Now when he tries to login to another application the challenge screen is thrown though he can continue to work on EBS without any issue. The reason being that the session timeout on the IDP side is set to 30 mins.
    To overcome this issue the solution that has been thought of using a javascript for each page load on the application which will update the SSO token with the latest UTC time on the IDP server. This has been successfully done for all other applications except EBS.
    So my question is how we can call this java script for each page load for EBS?
    Thanks & Regards
    Sarbashis

    It appears that OAM is removing the url parameters for the p_done_url sent to it by OIF.
         302 Redirect to -> Location: https://sso.mycompany.com/oam/server/logout?p_done_url=https%3A%2F%2Fsso.mycompany.com%2Ffed%2Fuser%2Fsloosso%3Fid%3Dosso%26type%3D3&invokeOSFSLogout=false
         Result: 200. Set-Cookie OAM-ID to expired.
    Form Submits: https://sso.mycompany.com/fed/user/sloosso
    Result: 500 Error
    Notice the p_done_url value in the redirect has extra parameters which when the Form is submitted are lost.
    If I manually enter the url: https://sso.mycompany.com/fed/user/sloosso?id=osso&type=3&invokeOSFSLogout=false
    Then I am successfully logged out.
    This seems almost like a bug in OAM...

  • RE: Legacy Integration with PI/Open

    Greg -
    We are currently working on wrappering the APIs for UniVerse (aka Pick on
    UNIX).
    We received some help from the guys at RTD in Denver.
    We tested out a C program that uses the Universe APIs and it works fine.
    We will be building the Forte piece and compiling it this week.
    Our first application is to inquire the UniVerse data, after that is
    successful, we will move to inserting & updating.
    Let us know how we can help.
    Larry McCartney
    [email protected]
    (203)459-7959 - Trumbull
    From:
    [email protected][SMTP:[email protected]
    om]
    Sent: Monday, October 12, 1998 11:00 AM
    To: [email protected]
    Subject: forte-users-digest V1 #1111
    forte-users-digest Monday, 12 October 1998 Volume 01 : Number
    1111
    In this issue:
    Legacy Integration with PI/Open
    is OBB32.dll available
    Java Integration
    Java Integration
    Re: Legacy Integration with PI/Open
    RE: Forms That Will Not Close
    RE: Forms That Will Not Close
    RE: Forms That Will Not Close
    Re: AfterValueChange event trigged when it shouldn't be...
    math library
    From: [email protected]
    Date: Mon, 12 Oct 1998 09:49:56 +1000
    Subject: Legacy Integration with PI/Open
    This is a bit of a long shot, but has anyone experience with integrating
    Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
    to read and update a PI/Open database from within our Forte application,
    and we would be most interested to hear from anyone who has experience in
    doing this.
    We are aware of a set of APIs provided with PI/Open that are written in
    "C". We could wrapper these from within Forte, however the issue is that
    the APIs provided are non-shared, and Forte requires shared libraries.
    Thanks in advance for any help.
    Greg Barber.
    The information transmitted is intended only for the person or entity to
    which it is addressed and may contain confidential and/or privileged
    material. Any review, retransmission, dissemination or other use of, or
    taking of any action in reliance upon, this information by persons or
    entities other than the intended recipient is prohibited. If you
    received
    this in error, please contact the sender and delete the material from any
    computer.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: "sridhar t" <[email protected]>
    Date: Sun, 11 Oct 1998 22:01:36 PDT
    Subject: is OBB32.dll available
    hi,
    am working on forte3.0.G.2. when i tried to use objectbroker library i
    am unable to find the runtime objectbroker library (OBB32.dll). is this
    dll available with this version. if not is there any alternative.
    thanks,
    sridhar,
    Goldstone Softech USA
    Get Your Private, Free Email at http://www.hotmail.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: srinivasa gopi <[email protected]>
    Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
    Subject: Java Integration
    Hello,
    I'm trying to integrate Forti with Java in Java mode using IIOP.I
    followed the steps as explained in the Forti Web enterprise manual.I
    compiled the Java files that are generated by Forti along with the
    client Java file.The Java applet is getting downloaded on the client
    browser(IE 4.0), but the problem is browser is giving an exception
    ** Java.lang.RuntimeException can't connect to service object with
    the ior file name **.
    My question is on every client is it necessary for ORB(Visigenic for
    Java 3.2) and also the Forti Java interoperability package that is
    provided by the Forti for compatability with Java or it is not
    required on the clients ?
    Is there any other alternative to achieve the goal as this will give
    wide access to the Forti service objects through Web Browser clients.
    Please mail me the solution to this problem as early as possible it is
    very urgent.
    Thanks in advance,
    Srinivasa Gopi,
    Goldstone Softech USA
    DO YOU YAHOO!?
    Get your free @yahoo.com address at http://mail.yahoo.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: srinivasa gopi <[email protected]>
    Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
    Subject: Java Integration
    Hello,
    I'm trying to integrate Forti with Java in Java mode using IIOP.I
    followed the steps as explained in the Forti Web enterprise manual.I
    compiled the Java files that are generated by Forti along with the
    client Java file.The Java applet is getting downloaded on the client
    browser(IE 4.0), but the problem is browser is giving an exception
    ** Java.lang.RuntimeException can't connect to service object with
    the ior file name **.
    My question is on every client is it necessary for ORB(Visigenic for
    Java 3.2) and also the Forti Java interoperability package that is
    provided by the Forti for compatability with Java or it is not
    required on the clients ?
    Is there any other alternative to achieve the goal as this will give
    wide access to the Forti service objects through Web Browser clients.
    Please mail me the solution to this problem as early as possible it is
    very urgent.
    Thanks in advance,
    Srinivasa Gopi,
    Goldstone Softech USA
    DO YOU YAHOO!?
    Get your free @yahoo.com address at http://mail.yahoo.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: Tim Hagemann <[email protected]>
    Date: Mon, 12 Oct 1998 09:21:06 +0200
    Subject: Re: Legacy Integration with PI/Open
    Greg,
    This is a bit of a long shot, but has anyone experience with integrating
    Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
    to read and update a PI/Open database from within our Forte application,
    and we would be most interested to hear from anyone who has experiencein
    doing this.
    We are aware of a set of APIs provided with PI/Open that are written in
    "C". We could wrapper these from within Forte, however the issue isthat
    the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
    You could write a dll (on windows) or shared library (on unix) wrappering
    the
    original,statically linked "C"-Libs. This lib could be used by Forte.
    Tim Hagemann
    Tim Hagemann
    Ascom GmbH Email: [email protected]
    Charlottenburger Allee 61 Phone: +49 241 96806 273
    D-52068 Aachen Fax: +49 241 96806 225
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: "Rottier, Pascal" <[email protected]>
    Date: Mon, 12 Oct 1998 09:38:25 +0200
    Subject: RE: Forms That Will Not Close
    Exiting the event loop will not close the window! Invoking
    'Close' method on the window will. Check if this method
    is executed. It appears, the AfterFinalize event exits the
    event loop and nothing more. Then, your applications
    waits for some event from your main window, like 'Mouse-
    Enter', before invoking Window.Close().
    Pascal
    Hi,
    We seem to be having some type of deadlock problem when trying to
    close
    forms and am wondering if anyone else has experienced this problem.
    The
    phenomenon does not always occur and is not specific to any one client
    machine.
    I will explain the phenomenon:
    1. We have an object that contains our main application startup
    method.
    This method then instantiates our main application window (Control)
    and
    invokes the Display() method using start task.
    2. All other forms created by the application are created using a form
    manager service object which exists on the client partition. The form
    manager has a CreateForm() method which instantiates a form class of
    the
    specified type and invoked the form's Display() method using start
    task.
    3. Each form has a Close push button which when clicked invokes
    Window.RequestFinalize().
    Now, the problem we have is this:
    The user starts the application and the main application window is
    displayed. The user then selects an option from the main window and a
    child form is created using the form manager service object and is
    displayed. The user can continue to create more child forms by
    selecting
    options from the main window and all child forms are instantiated and
    displayed correctly.
    However, when the user attempts to close one of the forms the form
    does
    not close. The finalize event is triggered and the event loop is
    exited,
    but the form continues to be displayed and does not close. If the user
    then moves the mouse pointer over the main application window, the
    child
    form immediately closes. Moving the mouse cursor over other child
    windows (or even the desktop) does NOT do this - only when the mouse
    cursor is moved over the main window does the child form close.
    Does anyone have any ideas on this?
    Regards,
    Jace.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive
    <URL:http://pinehurst.sageit.com/listarchive/>- -
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: Jason de Cean <[email protected]>
    Date: Mon, 12 Oct 1998 17:47:20 +1000
    Subject: RE: Forms That Will Not Close
    Hi Pascal,
    The Display() method is as follows:
    self.Open();
    event loop
    when Window.AfterFinalize do
    exit;
    when task.Shutdown do
    exit;
    end event;
    self.Close();
    <end>
    Are you saying we should do a Window.Close() in there somewhere as well
    Regards,
    Jace.
    On Monday, 12 October 1998 17:36, Rottier, Pascal
    [SMTP:[email protected]] wrote:
    Exiting the event loop will not close the window!
    Invoking
    'Close' method on the window will. Check if this method
    is executed. It appears, the AfterFinalize event exits
    the
    event loop and nothing more. Then, your applications
    waits for some event from your main window, like 'Mouse-
    Enter', before invoking Window.Close().
    Pascal
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: "Rottier, Pascal" <[email protected]>
    Date: Mon, 12 Oct 1998 11:04:24 +0200
    Subject: RE: Forms That Will Not Close
    Jason,
    No, self.Close() should close the window. This is the
    method I referred to. You could place a traceline
    behind self.Close() to see if it is executed. It is not
    inconcievable some exception may exit the Display()
    method before self.Close() is executed.
    After that, maybe, some events from your main
    window trigger something that causes a call like 'My-
    Window.Close()', where 'MyWindow' is a subclass of
    'UserWindow', so 'MyWindow' gets closed after all.
    Maybe you've overridden 'Close()', so now it doesn't
    work properly anymore.
    Are you sure you exit the event loop after you press
    the close button?? The display method is not regis-
    terred for any <PushButton>.Click event, though maybe
    you just didn't include the full Display method in your
    mail.
    Remember that an event loop will only respond to an
    event if it is not currently handling an event. So, the
    method behind <PushButton>.Click may call a self.
    Window.RequestFinalize(), which will cause an After-
    Finalize event to be posted, which will be placed in
    the event queue. If this method however keeps waiting
    for something, the event loop will not respond to the
    AfterFinalize event, until this method is done waiting.
    Pascal.
    Hi Pascal,
    The Display() method is as follows:
    self.Open();
    event loop
    when Window.AfterFinalize do
    exit;
    when task.Shutdown do
    exit;
    end event;
    self.Close();
    <end>
    Are you saying we should do a Window.Close() in there somewhere as
    well
    Regards,
    Jace.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: Thomas Kunst <[email protected]>
    Date: Mon, 12 Oct 1998 14:28:55 +0200
    Subject: Re: AfterValueChange event trigged when it shouldn't be...
    Which version of Fort=E9 are you using? We had some strage problems with
    GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
    Fouche, Jaco wrote:
    =
    Hi there,
    =
    I'm hoping that someone out there has experienced the following (and
    knows why it is happening. ) :-)
    =
    I have a couple of windows on which the AfterValueChange event is
    triggered on a field upon hitting the delete key.
    We all know that this should only happen upon leaving the field, ie. th=e
    field loosing focus. The problem is that I'm trying to recreate this in=
    a simple test class, but now it won't happen. I still have the original=
    windows on which it is happening, but I would like to construct
    something small and simple to send to Forte.
    =
    Any ideas as to why this could be happening?
    =- -- =
    Dr. Thomas Kunst mailto:[email protected]
    sd&m GmbH & Co. KG http://www.sdm.de
    software design & management
    Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
    Tel +49 89 63812-221 Fax -444
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: Greg Gorham <[email protected]>
    Date: Mon, 12 Oct 1998 09:51:07 -0400
    Subject: math library
    I need direction to the source of Forte libs that handle more scientific
    math. Also included is the need for more scientific print formating. I
    understand, second hand, that such material is available from third
    party vendors/sources.
    Thanks
    Greg Gorham
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    End of forte-users-digest V1 #1111
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Greg,
    This is a bit of a long shot, but has anyone experience with integrating
    Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
    to read and update a PI/Open database from within our Forte application,
    and we would be most interested to hear from anyone who has experience in
    doing this.
    We are aware of a set of APIs provided with PI/Open that are written in
    "C". We could wrapper these from within Forte, however the issue is that
    the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
    You could write a dll (on windows) or shared library (on unix) wrappering the
    original,statically linked "C"-Libs. This lib could be used by Forte.
    Tim Hagemann
    Tim Hagemann
    Ascom GmbH Email: [email protected]
    Charlottenburger Allee 61 Phone: +49 241 96806 273
    D-52068 Aachen Fax: +49 241 96806 225
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Excel integration with Entry and Approval for SSM not working

    Iu2019m having trouble getting excel integrated with E&A for being able to enter large number of historic data points into a cube-built model u2013 Iu2019ve gone through all the docs several times and there is no good concrete explanation on how to do this. I keep getting the following error message:
    Error opening Excel Automation server can't create object. This can be caused by:
    1. - The application is not installed on your machine
    2. - The browser security does not support ActiveX scripts.
    3. - Your were prompted to run ActiveX and you said No, if that is the cause close all browser instances and reopen.
    However, I've done the following:
    -          Iu2019ve installed the excel add-in on both the server and my local machine, and Iu2019ve enabled the add-in part in Excel on my local machine.
    -          The browser security is definitely set to accept all active X scripts
    -          I am never prompted to run activeX when I select u201CHistorical Datau201D within entry/approval. I just get the above error message.
    -          Iu2019ve flushed cache and restarted listener several times.
    What am I missing? I donu2019t see it in any of the docs.
    Thanks!

    Robb,
    Looking at what you've done, there doesn't seem to be an obvious answer. The best suggestion I can make is to fill out a support ticket on this. There must be other factors at work here that will require a deeper look.
    Regards,
    Bob

Maybe you are looking for