App Error 5232

i have a pearl flip and when i turn it on there is a white screen and the error message shows up. i don't care about the back up, i just want the error gone, please help

Hi and Welcome to the Community!
Here is a KB that discusses that error:
Article ID: KB24395 "Error 523", "App Error 523", or "JVM 523" appears on the BlackBerry smartphone
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

App error 606 and can't connect to desktop software either

hello,
today my blackberry (bold 9780) rebooted and once it restarted i got the app error 606, which i can reset over and over again (no help). i've googled and found out there were more people who've come across this problem. there were a lot of suggestions to use the dekstop software to backup and reinstall. but now i can't even connect to the desktopmanager, and the 'update' button isn't working either. i'm using a macbook pro (10.5.8) by the way. what can i do?
thanks.

Hey,
I already had it fixed. I know you can reset it via desktopmanager and there are some problems with new macs. But my mac isn't new (so no 64bit problem) and it wouldn't recognize it begin with. I never found out it had something to do with the fact that i never connected it before.
What I did was go to the store, had it send away.. So blackberry did the reset job for me. I got it back in 4days which made it less **bleep** haha.
I immediately connected it to my mac, and all was fiine.. So some can reset even with an error and some don't.. Hope this says enough.

App error 200 while updating my device software

Could anyone please give me some advice?
I was updating my Blackberry device software and after the update had finished was prompted to restart my system and the phone but my phone has since refused to come on. it keeps showing 'App Error 200' reset
The issue is that my blackberry is loading when the battery is removed and inserted again, but won't log in. After a while a white screen is displayed with the following message: App Error 200 and Reset just below it.
When I select the reset option, the above mentioned process just repeats itself.
My Blackberry desktop application does not even recognise up my phone once it is plugged in again.
please i would appreciate any help to correct this error and regain the use of my phone

i tried this one & it worked
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB10144&sliceId=2&cmd=displayKC&d...
or
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?noCount=true&externalId=KB03901&sliceId=2&cm...

Blue Screen of Death - Smax4pnp.exe app error

When I boot my T61 I get the "Smax4pnp.exe app error" and then later get the BSOD with Invalid_work_Queue_Item or no character string like the previous.
I ran MS Security Essentials and it found two or three Trojans & removed them.
Any idea what is causing this? Is my sound card dead?

A couple of things to try:
Run some other malware detector. Malwarebytes (frree) has done a good job for me. There are others.
Go to device manager and uninstall your sound "card". Reboot and let the driver reinstall. If it doesn't (or if the problem persists) download and install the latest driver and sound app.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Spooler SubSystem App error message when printing

I am having troubles printing with my HP Photosmart C4450 printer. The printer will not finish printing a job and will come up with the "Spooler SubSystem App" error message. The printer remains "frozen" after this message appears on my computer. I have tried uninstalling and reinstalling the printer witht the latest driver, downloading all the associated updates and running the HP Print Diagnostic tool to no avail. The spooler is indeed set to automatic and is started. I am running Windows XP on my computer. Any insight into this problem is appreciated. Thank you.

Have you tried with system PLD?
Thanks,
Gordon

BB 8320 showing APP error 523. How do I back up data before installing new os

Help me pls I'm very desperate> my BB is just over 1 year old. Woke up to find the screen with APP ERRor 523 reset . I've tried all tricks in previous treads without success. Only thing left is to install new os. Trouble is that the BB is not backed up yet. How can I back it up before removing old os and installing a new os

Hi and Welcome to the Forums!
Sorry, but it is highly likely that your data is already lost...so there is nothing to backup now. This simply proves the point that there are two kinds of computing device users...those who have lost data...and those who will. Backups before things go wrong are simply not optional.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

App error 606 reset

I updated by Verizon BB Bold 9650 three days ago to OS 6. It worked fine until this morning when I turned the phone on and received a 102 error on the phone. I performed a re-install of the most recent OS6 using BB desktop software. After installation I received this message:
Your BlackBerry® Device Software is updated and you can safely disconnect your device.
Warnings were encountered during the loading process:
The following modules could not be loaded because their digital signatures were invalid.
    SecurIDLib.cod
    net_rim_bb_diagnostic.cod
    net_rim_bb_file_explorer_library.cod
    net_rim_bb_fileindexservice.cod
    net_rim_bb_medialibrary.cod
    net_rim_bb_media_framework_api.cod
    net_rim_font_european_sff.cod
    net_rim_font_arial.cod
    net_rim_font_courier.cod
    net_rim_font_georgia.cod
When turned on, the phone cycles through several error screens ending with a white screen stating App Error 606 reset, then another screen stating failed task: 'JVM'.
Have tried reloading OS5 software without solution and attempted x3 to reload OS6 with same result.
Any help is greatly appreciated.

I updated by Verizon BB Bold 9650 three days ago to OS 6. It worked fine until this morning when I turned the phone on and received a 102 error on the phone. I performed a re-install of the most recent OS6 using BB desktop software. After installation I received this message:
Your BlackBerry® Device Software is updated and you can safely disconnect your device.
Warnings were encountered during the loading process:
The following modules could not be loaded because their digital signatures were invalid.
    SecurIDLib.cod
    net_rim_bb_diagnostic.cod
    net_rim_bb_file_explorer_library.cod
    net_rim_bb_fileindexservice.cod
    net_rim_bb_medialibrary.cod
    net_rim_bb_media_framework_api.cod
    net_rim_font_european_sff.cod
    net_rim_font_arial.cod
    net_rim_font_courier.cod
    net_rim_font_georgia.cod
When turned on, the phone cycles through several error screens ending with a white screen stating App Error 606 reset, then another screen stating failed task: 'JVM'.
Have tried reloading OS5 software without solution and attempted x3 to reload OS6 with same result.
Any help is greatly appreciated.

App Error 523

Hey Folks,
Im in a bit of a bother. 3 weeks ago, i went to goa for a few days off. I had switched off my phone, and when i landed, i turned it on in order to call the hotel. When i did turn it on, i got this white screen which simply said "app error 523" and gave me only one option, to reset. When i did reset the phone, it came back to the same screen, and now......thats all my blackberry does. Its a 8520 by the way. I cant put in my SIM PIN, i cant make a call, i cant plug it into a computer, i cant do anything with it basically. Its just dead.
SO!!! Since it is still under warranty, i gave it to Jumbo Electronics, hoping theyd be able to fix it up for me. I have specifically asked them to keep my data, because i have business contacts that are vital to my work on there. Now, Jumbo called me up, and said they cant make my phone functional, without reformatting the entire device, and losing all of my data.
Now, no offence to Jumbo, but i doubt they have the proper expertise to deal with this. As far as i can see, they are just plugging it into a PC and reformatting it like anyone could do.
Which is why i turn to you guys. Is there any way, any at all, that i can keep my data and use my phone ever again??
I havent ever backed it up, not that i would remember doing it, but i doubt i have. Is there any way i can fix this up??
Please please please help me out, im so sick of this. I did nothing wrong whatsoever, and now im losing time, and money i could have been making, as well as a constant headache.
Appreciate all your suggestions and responses.
Thanks and Cheers,
Gaurav

Hi
If you have never done a back-up of your device, then you will lose all your personal settings, contacts etc. Reformatting basically means reloading the software which will completely wipe out the data.
The ONLY possibility is that you have connected to the PC using the Desktop manager or Software and did inadvertantly do a back-up. If you never connected them don't bother trying to find the file, if you did it has the extension .ipd and so is easy to find in a search.
Otherwise the Jumbo guys are quite right. Sorry.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

App Error 523 Reset

Will somebody please help with my BB Pearl 8110 by walking me through
the complete resolution to this problem?
It all began by turning itself on and off, on and off.
I checked for updates an began the update process to v 5?
Unfortunately it must've turned itself on and off, on and off causing
App Error 523 Reset.
I followed other advice like hard and soft reboots? and my BB began
Blinking 4 times then once repeatedly.
So after going through, what I thought were the correct steps to recover
I've once again returned to
App Error 523 Reset.
At this point all I want is my BlackBerry back. Forget any personal items
I once had. I'll start all over again.
Thanks a bunch for any help and if it helps I will surely post so.
Scott

Hello!
We are so sorry that you are having so many difficulties. While many experience the same (a search here will reveal that fact), there are also many who have very positive experiences with their BB. Not every device is suitable for everyone -- which IMHO is why there are so many choices.
FYI -- these forums are a user-to-user support channel, not a user-to-RIM conduit. As such, it is unfortunate that we all missed your post and did not provide any useful responses to you...but, we are volunteers and not paid RIM support folks...sometime we just miss things. But a perusal through these forums will I think show your experience to be abnormal (as far as helpfulness in these forums is concerned). But, yes, I am biased...I volunteer a lot of time here when I can.
For the benefit of others who search and find this thread, here is the relevant KB for resolving the 523 error:
KB11816 Error "523 app.error.Reset" appears on the BlackBerry smartphone
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

App Error 602 & "Uncaught exception: Application net_rim_bb_messaging_app(144) is not responding; process terminated"

Hi,
I have spent a whole and very frustrating day trying to solve the following problem and in exasperation I resort to a posting here. Note no changes had been made to the phone prior to the start of the problem.
My Blackberry 9800 Torch freezes on power-up. It can only be ‘unfrozen’ by taking out the battery or, if left alone, after many minutes it comes up with the white screen, ‘App Error 602' and ‘Reset’ which is highlighted. Resetting has the same effect as taking out the battery. After each restart, it goes through the usual security and time checks and then freezes again. However, on rare occasions I got the message “Uncaught exception: Application net_rim_bb_messaging_app(144) is not responding; process terminated”.
Soon after the restart, after the Security Software Verification and on confirming the time/date, there is a very small window of opportunity (literally a couple of seconds) to access the phone. After much trial and error, I discovered that (in Manage Connections) by disabling the Mobile Network and WiFi - effectively putting it into ‘aeroplane mode’ - the device would work, without any problem and indefinitely. Except, of course, I couldn’t access the phone network nor the internet, which isn’t helpful(!).
I have taken this opportunity to do a full back-up on to my PC, through BlackBerry Desktop Software (though I’m not sure this backs up downloaded Apps??). Separately, I've also copied all the subdirectories from the phone’s memory and media card on to the PC, retaining their correct structures (but presumably also copying the corruption causing the problem?).
Any ideas???
- thanks in advance!

The method you are attempting is the automatic method...sometimes it just doesn't work, and you must take control. The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

App Error 200

After installing an uodate to PocketGrapes Digital Wine Diary last night I was prompted for a Restart which I accepted. The Restart gets no further than the white line across the bottom of the Blackberry screen which hangs for about 5 minutes and then shows App Error 200. If I accept Reset the process is repeated. If I remove the battery and then replace it the same thing happens.
I have tried to Restart in Safe mode but this does not work.
I have tried to Reload the OS from Blackberry Desktop Software but when I connect my phone, the phone restarts and I get the Error message: "Cannot communicate with the connected device" because it is rebooting. The only way I can stop it from rebooting is by taking the battery out but if I then try and connect my phone I get the same error message bacause the software thinks the battery is flat.
Any advice would be welcome.
Solved!
Go to Solution.

Hello gillalwyn23
Welcome to BlackBerry Support Forums
Do you have a backup of your device ? You may need it .
Refer to this Knowledge Base and try those suggestion :
KB10144 : How to force the detection of the BlackBerry smartphone using Application Loader
Please note , this method will data all user data within that device but you'll may be ab;le to get your device back in order , if you have a previous backup or using BlackBerry Protect you can restore it from there.
Additional Information :
KB30100 : "JVM 200" appears on the BlackBerry smartphone.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

App Error 603 Reset

Everything I have read posted re: this error is useless to me I have a Boostmobile BB Curve 9310 and haven't added any apps for awhile and all of a sudden the phone rebooted and instead of going to the home screen it went to a white screen with the error message " App Error 603"Reset, the only option you have is to reset and it just does the exact same thing. the posts as well as Blackberry's tech info on this state this is caused by a Java driven app that has created the problem and that the phone needs to have the OS reinstalled, sounds good but this error on my phone bars the usb cable from seeing the phone as it normally would, so since you can't see the phone you can't modidy, or delete anything much less re-install the OS, there is another post that suggests the use of the BBSAK program to reload the OS, same problem the program doesn't see the phone so NO CIGAR. Why is it that RIM doesn't have its techs working on this issue ??? Obviously its not an isolated problem.

Hi and Welcome to the Community!
I do not see that you have yet tried these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
You might also need to, instead of the web update site, install the Desktop Software and your BB OS package to your PC:
1) Uninstall, from your PC, any BB OS packages
2) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/apps-software/desktop/?lid=us:bboftwareesktopSoftware&lpos=us:bboftware
3) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
4) If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Now try the various tricks listed above and see if you can get your OS reloaded to your BB.
If things remain problematic, you may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

App Error 523 SOLVED!!

Did an software update on my curve to 4.5. when i tried to push a new theme on it, it reloaded a blank screen with a "App Error 523" code and a little reset button underneath it. i have tried the button many times now to have the curve reboot and give me the same error code...
removed battery and sim card many times, and still no changes
found answer here http://forums.pinstack.com/tags.php?s=7f0e34587c985c723b0226afa10db727&tag=523
Message Edited by mmbois on 03-19-2009 07:55 AM
Message Edited by mmbois on 03-19-2009 08:58 AM
Message Edited by mmbois on 03-19-2009 10:26 AM

this hyperlink didnt help me could you tell me how else to fix it?

App Error 523- Nothing is working

Hello,
I have a Blackberry curve 8310. Nothing is working anymore on my phone. There is this error message : app error 523. When I try to reset, it take 3 minutes of "waiting" with nothing on the screen, until the same message reappear. I also try taking off the battery for 3 minutes and put it in again, still nothing with the same message. I was wondering what can I do, and if nothing work, where can I send to phone for reparation, and how much it will cost for this kind of problem.
Thank you,

Greetings, and welcome to the BlackBerry.com Support Forums.
You have some offending third party application or theme on the device causing the error.
Option One: IF you know which third party application is causing the error, you can use the command line functions of JL_Cmder to remove the cod file from the device. That is a complicated method but the most simple if you know what to remove.
Optionos Two: Wipe the device totally with JL_Cmder and reload the Operating System fresh. You will lose ALL data on the device, so I hope you have a recent backup of the device.
Read this link for details:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
Do you have a recent backup? Search your entire PC hard drive c: for any file "*.ipd" (disclude the quote marks).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

App Error 200 - Reset, BB curve 8520

Hello,
While I was downloading the new BB software via BB desktop manager, my laptop suddenly closed. After that, when I re-opened my mobile, after reloading, the screen went blank with an "App Error 200 - Reset" in the middle of the screen. I tried pressing the reset button, but it repeats the same system again! How can I solve this problem?! Pleasee Help

Just enter an incorrect one 10 times and the phone will reset itself back to factory settings without a password and then you are good to go. (P.S: note that the device wont lock out it will start fresh as a new device). Have you made a back-up of your BB at any given point in time?
If so, then you can just load the backup through the Desktop Manager.
Please follow the below threads and would give you some more idea on the issue and a feasible solution if mine doesnot satisfy you:
http://supportforums.blackberry.com/t5/BlackBerry-Bold/Device-Lock-Password-reset/td-p/1125369
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/BlackBerry-device-password-does-not-w...

App Error 5232

Similar Messages

Maybe you are looking for