App not behaving as it should

One of my apps is stuck in waiting mode for days now. It appears as though it got stuck during an update.

My Discover Card App.
It's frozen... Can't delete it or anything. Just stuck in "waiting" mode...won't open... Nothing.

Similar Messages

500k Unique Limit not behaving as it should?

Hoping to get an official "Adobe" answer here as results via Twitter were not too successful, plus this is just too detailed to be accurately articulated in 140 character chunks. Anyways, the problem comes with an instance I am working on where unique page views for URLs that are well over 500K are not being bucketed in to the "low traffic" category as they should be per this adobe documentation:
Uniques Exceeded (Low-Traffic) Logic
I've attached a screenshot, these URLs all only have 1 view per the month, and are not previously recorded, so these should all be falling into the low bucket traffic, but they are not, and this number continues to grow. Anyone experienced this before, and if you have, do you have insights on to why the software is behaving as such?
Thanks!

This forum section is for the analytics of Business Catalyst, One of Adobe's CMS's. IT is not the Adobe Marketing Cloud software forum.

IMAP Mailbox not behaving as it should with Mac

Hi all,
Hope you can help.
Have recently set up an IMAP email account for my business on both my Mac and my iPhone.
Anything read or deleted on my Mac syncs with my iPhone as it should but when I read the email on my iPhone it does NOT appear as 'read' on my Mac. In fact, it marks itself as unread again if left for a while. Also mail deleted on the phone does not appear deleted on my Mac.
Any help anyone could give would be greatly appreciated.
Many thanks in advance,
Nigel

My Discover Card App.
It's frozen... Can't delete it or anything. Just stuck in "waiting" mode...won't open... Nothing.

APP NOT BEHAVING PROPERLY

I am using the doodle app for ipad and I'm trying to either post my doodle artwork to facebook OR email my completed work to myself OR to friends/family. The app manufacter says to reinstall the app but I fear that any artwork on my ipad will be lost. I've made a back up to my computer of my ipad. Is there a way to view my backup so I can feel confident my artwork is backed up? I have tried to get resolution from the company but they are non responsive. Their issue is to install everything to my ipad.
I am using the latest software and I have an I pad 4 with retina display.
Please help! Thanks!

My experience with apps is if you delete them to reinstall them you'll lose the data associated with them. If you can't e-mail or post to FB, can you save it somewhere else? Maybe to your camera roll?
Have you tried to force quit the app? That just basically makes the app reboot and shouldn't wipe out any data (unless maybe if you do it in the middle of your artwork)
Double tap the home button. If you have iOS6 you'll see your app icons line up on the bottom of the screen. Scroll sideways if needed to access the one for your app. THen hold your finger down on it until they start to shake. THen tap the red circle to close the app. Single tap the home button to exit that mode.
If you're in iOS7 when you double tap the home button you'll see app icons line up with a preview above them. To close the app, flick that preview up and off the screen. Single tap the home button to exit the mode.
Then reopen the app and try to mail your artwork.

Combo box not behaving like it should

I have a form in which I have 4 combo boxes that have more or less the same choices, however there is one that is common to all 4 (E078).
When "E078" is selected in any of the combo box, a new combo box will appear (and a white rectangle will be hidden so that the new combo box title can be seen). It works when I select that in one or more combo box, however to make it disappear I have to select some other choice in the same combo box twice!!! If I select anything only once, it will not make the new combo box hidden, but if re-select something (same or another choice) then the combo box will disappear!
I am at lost, and would be very thankful if someone could make it work seamlessly. I mean it works, nut it is just inconvenient and I cannot tell the user to make select something else twice if they want the field to disappear.
Here is my form:
https://workspaces.acrobat.com/?d=WjF6aV8IUuBX2w8iZN3k0g

When you use event.value in a combo box's Validate event it does not give you the export value, which is what you want. It is easier to use place the code in a custom Keystroke script where you can use the event.changeEx property to retrieve the export value of the selected item. See the documentation for more information: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.607.html

Rephrase my previois post: why mustsaslserver not behaving as it should be

Shane,
I think it is better to rephrase my question:
In a previous answer you said the following:
An email server/client was able to connect to your server on port 25
You can enforce SASL on port 25 connections from non-local hosts (not defined in INTERNAL_IP) by modifying the imta.cnf configuration file and changing the tcp_local channel definition. Replace the "maysaslserver" keyword with "mustsaslserver".
But I've just found this on my testing server:
After changing the maysaslserver to mustsaslserver for the tcp_local
stanza,
PC clients CANNOT connect to my testing server (for mail relaying)
, which is correct.
But mails from email servers
^^^^^^^^
CAN, becos incoming mails are still able to come in and sent to
the local users.
The mapping file is okay as the stanza is :
INTERNAL_IP
$(ip.of.this.host/24) $Y
127.0.0.1 $Y
* $N
Why?

Okay, Shane.
Let me describe what I've tried on this JSMS server.
But before I do so, here is the relevant lines in my mappings file:
INTERNAL_IP
$(158.182.1.76/24) $Y
127.0.0.1 $Y
* $N
My line in imta.cnf , i.e. before I've changed it looks like:
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric sub
dirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel t
cp_auth missingrecipientpolicy 0 loopcheck
When I tested it by sending mail to one of its users from outside, the mail was received
okay. This is expected.
Now according to the manual, if I change the "maysaslserver" in the line above
to "mustsaslserver", then if I did the same test mentioned above,
it will reject the mail because it won't accept any smtp connection from
anything other than its own IP (158.182.1.76) or 127.0.0.1
Is my understanding CORRECT ?
But when I did the same test (i.e. sending mail to it like I've described above,
there's no difference. In other words. it did not reject the mail but received it)
Why?

Navigation menu active page color not behaving as it should

I created an unordered list for the mainnav links. I use the following lines in the code:
<li><a href="../index.html" class="thispage">Home</a></li>
        <li><a href="#">Events</a></li>
        <li><a href="#">Music</a></li>
        <li><a href="#">Agenda</a></li>
        <li><a href="../Pages/artists.html">Artists</a></li>
The Home button shows the color for 'active', but if I go to the artists page it first shows the hover color, then the page opens but does not show the active color.... I.o.w. the Home button stays on active though it is not active.
Please see the effect on my testsite: www.adrianrooymans.nl

armona22 wrote:
I'm sorry, but I tried that already, and it does not solve the problem. If I do that I get TWO active pages, but clicking anywhere on the artists page makes the blue color go away, except for the Home button.... I could temporarily put that on the testserver so that you could see what happens (unless you beleive me).
You will get two active menu items unless the class is removed from the links that you don't want it on.
If you look at the example page code in the 'completed' folder of the Bayside Beat tutorial you will see on the 'index' page the class has been added to the 'index' link:
<nav id="mainnav">
      <ul>
        <li><a href="index.html" class="thispage">Home</a></li>
        <li><a href="sightseeing.html">Sightseeing</a></li>
        <li><a href="#">Eating Out</a></li>
        <li><a href="#">What's On</a></li>
        <li><a href="#">Where to Stay</a></li>
      </ul>
    </nav>
Whilst on the 'sightseeing' page the class has been moved to the 'sightseeing' link:
<nav id="mainnav">
        <ul>
            <li><a href="index.html">Home</a></li>
            <li><a href="sightseeing.html" class="thispage">Sightseeing</a></li>
            <li><a href="#">Eating Out</a></li>
            <li><a href="#">What's On</a></li>
            <li><a href="#">Where to Stay</a></li>
        </ul>
    </nav>

IPhoto is not behaving as it should!

It's really slow to load.
iCloud sharing doesn't seem to work properly although I followed the help instructions meticulously.
When I click "share" it takes ages to load and "iCloud" is grayed out and the only option given is email.
It won't let me set up a new stream- or rather it won't let me load anything into a new stream.
At the moment I've given up and am sharing via a memory stick which is useless for videos!!
Help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

NIC Bonding not behaving as it should

Hi Folks, am trying to setup NIC bonding on my VM (OEL5u6) having two virtualised NICs, i have done the setup which is quite simple however my active-backup mode is not working as expected.
My Bonded interface
[root@Gateway network-scripts]# cat ifcfg-bond0
DEVICE=bond0
IPADDR=192.169.25.2
NETMASK=255.255.255.248
ONBOOT=yes
BOOTPROTO=none
USERCTL=no
BONDING_OPTS='mode=active-backup miimon=1000'
TYPE=Ethernet
individual interfaces
[root@Gateway network-scripts]# cat ifcfg-eth2
DEVICE=eth2
HWADDR=08:00:27:1e:57:cf
MASTER=bond0
SLAVE=yes
ONBOOT=yes
BOOTPROTO=none
USERCTL=no
[root@Gateway network-scripts]# cat ifcfg-eth4
DEVICE=eth4
HWADDR=08:00:27:46:69:69
MASTER=bond0
SLAVE=yes
ONBOOT=yes
BOOTPROTO=none
USERCTL=no
Bonding status (looks good)
[root@Gateway network-scripts]# cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
Bonding Mode: fault-tolerance (active-backup)
Primary Slave: None
Currently Active Slave: eth2
MII Status: up
MII Polling Interval (ms): 1000
Up Delay (ms): 0
Down Delay (ms): 0
Slave Interface: eth2
MII Status: up
Link Failure Count: 0
Permanent HW addr: 08:00:27:1e:57:cf
Slave Interface: eth4
MII Status: up
Link Failure Count: 0
Permanent HW addr: 08:00:27:46:69:69
I am doing a continous ping from another host in the same n/w to this bonded interface IP to check if the ping streak breaks when i test this setup
Testing -
[root@Gateway network-scripts]# ifenslave -c bond0 eth4
and that's it my SSH connection is gone, and ping is broken with "Request timed out"
when i check the bond status now -
Bonding Mode: fault-tolerance (active-backup)
Primary Slave: None
Currently Active Slave: eth4
MII Status: up
MII Polling Interval (ms): 1000
Up Delay (ms): 0
Down Delay (ms): 0
Slave Interface: eth2
MII Status: up
Link Failure Count: 0
Permanent HW addr: 08:00:27:1e:57:cf
Slave Interface: eth4
MII Status: up
Link Failure Count: 0
Permanent HW addr: 08:00:27:46:69:69
am afraid there's not much help in the message log to debug this.
Any views what's wrong and how to resolve? appreciate ur replies. Thanks
Regards Amit

Hi,
I'm having the same problem, when i disconnect the cable from the eth0 (active slave) stop receiving respond
I have tried bridged conf and interal net.
I'm using VirtualBox 4.1.16
This is my conf:
[root@integrador ~]# cat /etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
IPADDR=10.10.0.2
NETWORK=10.10.0.0
NETMASK=255.255.255.0
BONDING_OPTS="mode=1 miimon=100"
BOOTPROTO=none
ONBOOT=yes
[root@integrador ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=none
MASTER=bond0
SLAVE=yes
USERCTL=no
[root@integrador ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
ONBOOT=yes
BOOTPROTO=none
MASTER=bond0
SLAVE=yes
USERCTL=no
[root@integrador ~]# cat /etc/modprobe.d/bonding.conf
alias bond0 bonding
[root@integrador ~]# ifconfig -a
bond0 Link encap:Ethernet HWaddr 08:00:27:5C:C5:BA
inet addr:10.10.0.2 Bcast:10.10.0.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe5c:c5ba/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:402 errors:0 dropped:0 overruns:0 frame:0
TX packets:92 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:39487 (38.5 KiB) TX bytes:11045 (10.7 KiB)
eth0 Link encap:Ethernet HWaddr 08:00:27:5C:C5:BA
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:211 errors:0 dropped:0 overruns:0 frame:0
TX packets:89 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:23061 (22.5 KiB) TX bytes:10863 (10.6 KiB)
eth1 Link encap:Ethernet HWaddr 08:00:27:5C:C5:BA
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:191 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16426 (16.0 KiB) TX bytes:182 (182.0 b)
eth2 Link encap:Ethernet HWaddr 08:00:27:DF:11:A2
inet addr:192.168.57.1 Bcast:192.168.57.3 Mask:255.255.255.252
inet6 addr: fe80::a00:27ff:fedf:11a2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:1142 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:119508 (116.7 KiB)
eth3 Link encap:Ethernet HWaddr 08:00:27:D1:41:9A
inet addr:192.168.1.50 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fed1:419a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:825 errors:0 dropped:0 overruns:0 frame:0
TX packets:625 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:563221 (550.0 KiB) TX bytes:85914 (83.9 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:25 errors:0 dropped:0 overruns:0 frame:0
TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2690 (2.6 KiB) TX bytes:2690 (2.6 KiB)
[root@integrador ~]# cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
Bonding Mode: fault-tolerance (active-backup)
Primary Slave: None
Currently Active Slave: eth0
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0
Slave Interface: eth0
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 08:00:27:5c:c5:ba
Slave queue ID: 0
Slave Interface: eth1
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 08:00:27:fc:6b:f6
Slave queue ID: 0
[root@integrador ~]# lsmod | grep -i bond
bonding 109558 0
ipv6 264641 39 cnic,bonding,ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6
[root@integrador ~]# uname -a
Linux integrador 2.6.32-220.el6.i686 #1 SMP Tue Dec 6 16:15:40 GMT 2011 i686 i686 i386 GNU/Linux
Sorry for my english!

For loop is not behaving as it should

Hi,
Please help me if you can.
I'm using netbeans, I have a Dog class with a bark() method which contains an If/Else Statement:
void bark() {
if (size > 60) {
System.out.println("Woof! Woof!");
} // If
if (size > 14) {
System.out.println("Ruff! Ruff!");
} // If
else {
System.out.println("Yip! Yip!");
When I call this method from the Dog class with a new Dog object (after I have initialised it with a value of 64, the If statements execute If size > 60 AND if size > 14 and it didn't before! Why is this? It used to just execute the top If statement.
The only thing I can think of is that I was trying to define set CLASSPATH on the command prompt the other day (to no success even though it was pointing right to the folder for javac etc) but I don't think this would cause an If statement to execute like this?

Akhkhi wrote:
Check the value of size variable in your method..I think its finding somthing different value what u r expecting ...what the heck are you talking about? This has absolutely nothing to do with the original poster's problem.

Podcasts app not performing as it should on iOS 7.0.2

I have a Podcast that I watch frequently on my iPad. When I go to update my Podcast from within the specific podcast the latest podcast begins to download; however, after most of the download has been received I get an error message. The only way I can get the episode is to cause it to be downloaded using iTunes, and then syncing the iPad to iTunes. This poor performance seems to have begun when I installed iOS 7! A known problem? When for the fix?

Hello,
I have the same problem!
Any idea?
Thanks.

BBC news app not refreshing?

iPad air, bbc news app has stopped, I've closed it and also
Done a full reset but every time I open it it goes back to Thursdays news.
It's on wifi and all other apps seem fine?

Hello,
Thanks for visiting Apple Support Communities.
If the BBC News app is not behaving as it should, be sure to try all of the steps in this article:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Best Regards,
Jeremy

I purchased OS X Lion on my laptop and if I use the same username on my desktop it should just download not make me pay again, yet it is still saying "BUY APP" not "INSTALL." What do I do?

I purchased OS X Lion on my laptop and if I use the same username on my desktop it should just download not make me pay again, yet it is still saying "BUY APP" not "INSTALL." What do I do?

Hi...
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.
Mac App Store: Backing up your app purchases

HT3702 I have problem in-app purchase. I not receive order item, should i can do ?

I have problem in-app purchase. I not receive order item, should i can do ?
deteil : I purchase in-app item in the app heroes of destiny but not receive order item, have a message purchase fail,I try to purchase often but have a message purchase fail again and iTunes Store send a billing to me.
I want refund,please help refund to me
Order number: 120050201007
Item title: MH0VV2M2TQ
number 139050286821
Item title: MH0VVDJ5BH
number 18205073147511
tem title: MH0VVF45V8

You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I purchased a program on Mac App store and the program does not act as it should, also was required to pay up front whereas had I went to the web site, ibank 4 I would have had 30 days free trial an would have found that the program does not work.?

I purchased a program on Mac App store and the program does not act as it should, also was required to pay up front whereas had I went to the web site, ibank 4 I would have had 30 days free trial an would have found that the program does not work.?

Free trials are not available through the Mac App Store.
Apple is not here. Apple does not answer questions here. This is a user to user support forum. There are only folks here who use Apple products.

App not behaving as it should

Similar Messages

Maybe you are looking for