App Store icon shows three updates, but the screen is blank when I try to update my ipad

App Store icon shows three updates, but the screen is blank when I try to update my ipad

Already covered in a discussion that has over 180 threads to it.  Search before posting please or just simply look down the list of current topics.  It's readily near the top.
https://discussions.apple.com/thread/5194126?tstart=0

Similar Messages

  • I cannot view the updates on the App Store. The app icon shows 2 updates but the screen is blank. Need advice?

    I cannot view my updates on the App Store, the app icon shows 2 updates,but the screen is blank. Need advice.

    I have the same problem.
    I think there's a problem with the update server. Try again later.

  • The screen is blank when I try to buy diamonds. Does anyone else have this problem?

    Is anyone else having a problem purchasing diamonds in Hay Day? The screen is always blank when I go to it.

    That would be a problem with the game not the iPad. Try updating the game(if needed). If that doesnt work, remove and redownload the game. If that doenst work, then Hay Day will come out with an update soon to fix that.

  • App Store icon shows updates available, but all apps up to date

    Just bought Iphone 5c, second day, App store icon shows updates available, but PC, store and other Iphones show none.  Tried resetting, updates to ios 8.02, synching, going through each app individually to see if there is an update, no luck.
    Wnen I reset, the icon shows a badge with 7 updates available.  I opened App Store, bottom right (update icon) showed the same.  Tapped it, the update screen appears (as normal), and the 7 on the update icon disappeared, screen says UPDATES All apps are up to date.  However, on the home screen, the App store badge still shows 7 updates.
    Anyone else having the same prob?  What is the fix?

    Tried that, tries a soft reset, and a hard reset, no luck.  Funny thing is, my other iphones and IPad work fine, its just the Iphone 5.

  • I am Canadian. I apparently tried to download an app from the US app center but couldnt. Now I can't download or update any apps because I am still connected to the US site. When I try it says "change over to the Canadian site" but it doesnt shown me how.

    I am Canadian. I apparently tried to download an app from the US app center but couldnt. Now I can't download or update any apps because I am still connected to the US site. When I try it says "change over to the Canadian site" but it doesnt shown me how.

    You cannot use other countries itunes stores.
    You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country...

  • I changed my Apple ID on iTunes and on the iPhone 4. When I try to "Update All" the old Apple ID (I no longer have access to the email address) shows up. How do I update those apps?

    I changed my Apple ID on iTunes and on the iPhone 4. When I try to "Update All" the old Apple ID shows up (I no longer have access to that email address). How do I update those apps?

    Apps are DRM protected and tied to the account used to originally obtain them. They cannot be transferred to another iTunes account nor updated using another iTunes account. Only the account used to obtain them can be used to update them. You can contact iTunes support, explain the situation & ask that they add these apps to the download queue of your new account:
    http://www.apple.com/support/itunes/contact.html

  • I try to buy an application in the apps store in my macbook pro but the system told me that i had to contact iTunes support

    i try to buy an application in the apps store in my macbook pro but the system told me that i had to contact iTunes support

    OK, then you need to contact iTunes Support. Did you have a question you'd like us, your fellow users, to help you with?
    Regards.

  • HT1430 My ipad has the Internet connected nut when I try to update apps a message pops up to say it cannot connect to,iTunes store.

    My ipad has the Internet connected nut when I try to update apps a message pops up to say it cannot connect to,iTunes store.

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

    I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • TS3297 After downloading the latest version of iTunes, the store will not load. It appears as if it has loaded, but the screen remains blank.

    After downloading the latest version of iTunes, the store will not load. It appears as if it has loaded, but the screen remains blank.

    I have the same problem and have been fighting with it for several days. I think the last thing that I did before this happened was to let Quicktime update itself. When I open itunes and click on store, the connecting bar gets halfway and then stops. That leaves me with the white store page, if I leave it alone for a bit, I see words as in names of singers and but no pictures.
    I have ran the diagnostics and see no problems at all, no event logs in windows, no errors at all. I've un-installed itunes and re-installed but no change. I'm using Norton 360 from comcast. I have windows 7 pro 64 bit. Also, the help in itunes doesn't display.
    I put in a ticket with apple and the response I got back basically told me to do what I've already done. I created a new user and have the same issue.
    Any help at all will be very much appreciated. I think this started August. 8, 2011.
    thanks so much for reading

  • Hi, I have just tried to update the iPhone software and it appears to be updating but the screen on my phone has had the same picture of the apple and its at the same spot of loading (about 3 quarters) for the last HOUR!! help!

    Hi, I have just tried to update the iPhone software and it appears to be updating but the screen on my phone has had the same picture of the apple and its at the same spot of loading (about 3 quarters) for the last HOUR!! help!

    oh and the device is not being recognised by itunes now either.

  • I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • The problem is that when I try to update my NI-DAQ drivers from 6.5.1 to version 6.7

    I have a Win95 based system running Labview5.1 which utilizes the PCI-6025E board with the BNC-2090. The existing version of NI-DAQ drivers is 6.5.1. The problem is that when I try to update my NI-DAQ drivers to version 6.7 I receive the following errors:
    1.The new software goes thru all the installation steps upto the point where it displays the message that it needs to restart to complete the installation.
    2. The system then reboots and displays the message," Completed Updating Window Files"
    3. Then I receive an error:
    'Rgdaqhce' performed an illegal operation and will shut down.
    4. The window closes and brings me back my normal Desktop display. The NI setup window appears and displays" Installing: Please Wait".
    5. Then it goes thru the NI-DAQ setup normally, choosing the PCI-6025E and the BNC 2090 doc options.
    6. WHen it gets to the point of selecting Documenatation PAth, Error: NI-DAQ SETup
    Cannot find installation information for :322153.
    At this point I just choose OK.
    Then it proceeds where it request the Development path, LAbview 5.1 and then it proceeds to copy all the files and then states "Installation Complete" and are ready to configure MEasurement & Automation Sys.
    7. The Measurement & Automation window appears:
    DATA NEIGHBORHOOD
    DEVICES & INTERFACES
    SCALES.. WHen I click on any one of the above I get the following message:
    " The configuration file has been updated from a previous system. If you save changes to this file it will be permanently upgraded to the current version." At this point I choose "OK"
    8. Then it states.."you must reboot for the changes to take effect. Would you like to reboot? YEs or No!". where the Data Neighborhood folder never opened..
    9. If you choose YES, the system reboots. If I open Measurement & Automation and click on Data Neighborhood again, I get the same above message as in #8 above. If I choose No at anytime to reboot, I get the following Error:
    " Explorer- Illegal operation and it will shut down"
    Then Measurement & Automation shuts down and brings me back to my windows desktop.
    SO no matter what happens I can never get into Data Neighborhood, it keeps going into this cycle.
    So I removed NI-Daq version 6.7 and re-installed version 6.5.1.
    What recommendations may you suggest in upgrading from NI-Daq 6.5.1 to 6.7 on this system? I would like to take advantage of NI-DAQ 6.7 new feature where LAbview for Windows Data Acquisition Library LLBs now contain function calls to a dynamic link library called LVDAQ.DLL, where the benefit of changing the VIs to call DLL functions instead of code interface nodes, CINs, where thet VI load time is dramatically improved.
    Any help with this matter would be greatly appreciated.
    In the meanwhile I am searching your support page here to see if there are any similiar situation..I have not come across any as of yet.
    Thanks for your help and sorry for such a long email.

     Hi,
    One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
    I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
    Any idea how can this problem be solved?
    It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
    Thanks

  • My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file loca

    My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Hello, I just purchase Adobe Premier elements 12. I installed it but the only problem is when I try to open "new project" it tells me I have to put my password in and username for the first seven days of installation, but when I do that the project never

    Hello, I just purchase Adobe Premier elements 12. I installed it but the only problem is when I try to open "new project" it tells me I have to put my password in and username for the first seven days of installation, but when I do that the project never opens, it just has the loading bar loading and then it stops, so I have no idea wat the problem is, please help

    new project help
    What computer operating system is your Premiere Elements running on?
    Have you gone through the typical drills of
    1. Latest version of QuickTime installed on your computer with Premiere Elements?
    2. Running program from User Account with Administrative Privileges as well as from Run As Administrator applied to the desktop icon
    with right click of the icon, followed by selecting Run As Administrator?
    3. Does problem exist with and without the antivirus and firewall(s) disabled?
    4. Even though the Premiere Elements 12 Editor will not open, can you open the Elements Organizer 12?
    If Yes to all of the above, please review the following for a possible solution...
    ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
    Please review and consider the above and then we can decide what next which might include trying to open
    the program directly from the .exe files.  (If Windows 7, 8, or 8.1 64 bit, Local Disk C\Program Files\Adobe\
    Adobe Premiere Elements 12\ and in the Adobe Premiere Elements 12 Folder are the Adobe Premiere Elements 12.exe
    and Adobe Premiere Elements.exe files. Double click the Adobe Premiere Elements .exe file to try to open the project.)
    We will watching for your results.
    ATR

Maybe you are looking for

  • Hello, I would like to know if it is possible to have imessage (like on iPad) but with my macbook air ?

    I have an macbook air and i would like to know if it is possible to have "message" on my computer to text for free to apple users..

  • Can I connect an imac ppc to a imac intel?

    I just bought an imac 2011 intel and I want to connect to my imac 2005. Can this be done?

  • Transcoding footage off cards.

    I'm coming from a final cut pro 7 workflow environment.  In final cut I would normally go to file>log and transfer to transcode my footage off my card into video files.  Is there something similar where I can do this in premiere too?  I would rather

  • F.03 clarification-year end

    Hi When we executed F.03 financial comparitive analysis we are getting around 6 accounts in G/L and 3 accounts in AR as accounts in errors showing some debit or credit balance differences.(When had a glance,in  some cases debit and credit differences

  • Best Ways to Handle Multiple Users

    First post....heres my question. Can anyone help me determine the best way to handle multiple users in itunes? Some Background: My family shares one computer. We have on folder on the hard drive where we keep all our music files. I got an ipod and it